blob: 1d0dad1210d380849370738dbfb6a7b0e07773e8 [file] [log] [blame]
Sitronix ST7586 display panel
Required properties:
- compatible: "lego,ev3-lcd".
- a0-gpios: The A0 signal (since this binding is for serial mode, this is
the pin labeled D1 on the controller, not the pin labeled A0)
- reset-gpios: Reset pin
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in ../spi/spi-bus.txt must be specified.
Optional properties:
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
compatible = "lego,ev3-lcd";
reg = <0>;
spi-max-frequency = <10000000>;
a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;