blob: fc1317ab32264efd3f12a92fc007925d98149588 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom CRU
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
description: |
Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
clocks, pinctrl, USB PHY and thermal.
properties:
compatible:
items:
- enum:
- brcm,ns-cru
- const: simple-mfd
reg:
description: CRU registers
ranges: true
"#address-cells":
const: 1
"#size-cells":
const: 1
pinctrl:
$ref: ../pinctrl/brcm,ns-pinmux.yaml
patternProperties:
'^clock-controller@[a-f0-9]+$':
$ref: ../clock/brcm,iproc-clocks.yaml
'^thermal@[a-f0-9]+$':
$ref: ../thermal/brcm,ns-thermal.yaml
additionalProperties: false
required:
- reg
examples:
- |
cru-bus@1800c100 {
compatible = "brcm,ns-cru", "simple-mfd";
reg = <0x1800c100 0x1d0>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
clock-controller@100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
reg = <0x100 0x14>;
clocks = <&osc>;
clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
};
clock-controller@140 {
#clock-cells = <1>;
compatible = "brcm,nsp-genpll";
reg = <0x140 0x24>;
clocks = <&osc>;
clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
"iprocfast", "sata1", "sata2";
};
pinctrl {
compatible = "brcm,bcm4708-pinmux";
offset = <0x1c0>;
};
thermal@2c0 {
compatible = "brcm,ns-thermal";
reg = <0x2c0 0x10>;
#thermal-sensor-cells = <0>;
};
};