blob: 9012a2a02e14dd6275b7e11e40c9bf5bae1e5c1f [file] [log] [blame]
Device-Tree Bindings for a PPS Signal on GPIO
These properties describe a PPS (pulse-per-second) signal connected to
a GPIO pin.
Required properties:
- compatible: should be "pps-gpio"
- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt
Additional required properties for the PPS ECHO functionality:
- echo-gpios: one PPS ECHO GPIO in the format described by ../gpio/gpio.txt
- echo-active-ms: duration in ms of the active portion of the echo pulse
Optional properties:
- assert-falling-edge: when present, assert is indicated by a falling edge
(instead of by a rising edge)
pps {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
echo-active-ms = <100>;
compatible = "pps-gpio";