drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c

// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2007 - 2011 Realtek Corporation. */

#include "../include/Hal8188EPwrSeq.h"
#include "../include/rtl8188e_hal.h"

/*
    drivers should parse below arrays and do the corresponding actions
*/
/* 3 Power on  Array */
struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_CARDEMU_TO_ACT
	RTL8188E_TRANS_END
};

/* 3Radio off Array */
struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_ACT_TO_CARDEMU
	RTL8188E_TRANS_END
};

/* 3Card Disable Array */
struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_ACT_TO_CARDEMU
	RTL8188E_TRANS_CARDEMU_TO_CARDDIS
	RTL8188E_TRANS_END
};

/* 3 Card Enable Array */
struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_CARDDIS_TO_CARDEMU
	RTL8188E_TRANS_CARDEMU_TO_ACT
	RTL8188E_TRANS_END
};

/* 3Suspend Array */
struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_ACT_TO_CARDEMU
	RTL8188E_TRANS_CARDEMU_TO_SUS
	RTL8188E_TRANS_END
};

/* 3 Resume Array */
struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_SUS_TO_CARDEMU
	RTL8188E_TRANS_CARDEMU_TO_ACT
	RTL8188E_TRANS_END
};

/* 3HWPDN Array */
struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
	RTL8188E_TRANS_ACT_TO_CARDEMU
	RTL8188E_TRANS_CARDEMU_TO_PDN
	RTL8188E_TRANS_END
};

/* 3 Enter LPS */
struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS] = {
	/* FW behavior */
	RTL8188E_TRANS_ACT_TO_LPS
	RTL8188E_TRANS_END
};

/* 3 Leave LPS */
struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
	/* FW behavior */
	RTL8188E_TRANS_LPS_TO_ACT
	RTL8188E_TRANS_END
};