| # SPDX-License-Identifier: GPL-2.0-only |
| menuconfig USB_GSPCA |
| tristate "GSPCA based webcams" |
| depends on VIDEO_V4L2 |
| depends on INPUT || INPUT=n |
| select VIDEOBUF2_VMALLOC |
| default m |
| help |
| Say Y here if you want to enable selecting webcams based |
| on the GSPCA framework. |
| |
| See <file:Documentation/admin-guide/media/gspca-cardlist.rst> for more info. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" to use this driver. |
| |
| To compile this driver as modules, choose M here: the |
| module will be called gspca_main. |
| |
| |
| if USB_GSPCA && VIDEO_V4L2 |
| |
| source "drivers/media/usb/gspca/m5602/Kconfig" |
| source "drivers/media/usb/gspca/stv06xx/Kconfig" |
| source "drivers/media/usb/gspca/gl860/Kconfig" |
| |
| config USB_GSPCA_BENQ |
| tristate "Benq USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for the Benq DC E300 camera. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_benq. |
| |
| config USB_GSPCA_CONEX |
| tristate "Conexant Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Conexant chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_conex. |
| |
| config USB_GSPCA_CPIA1 |
| tristate "cpia CPiA (version 1) Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for USB cameras based on the cpia |
| CPiA chip. Note that you need at least version 0.6.4 of libv4l for |
| applications to understand the videoformat generated by this driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_cpia1. |
| |
| config USB_GSPCA_DTCS033 |
| tristate "DTCS033 (Scopium) USB Astro-Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for the Scopium camera |
| for planetary astrophotography. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_dtcs033. |
| |
| config USB_GSPCA_ETOMS |
| tristate "Etoms USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Etoms chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_etoms. |
| |
| config USB_GSPCA_FINEPIX |
| tristate "Fujifilm FinePix USB V4L2 driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the FinePix chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_finepix. |
| |
| config USB_GSPCA_JEILINJ |
| tristate "Jeilin JPEG USB V4L2 driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on this Jeilin chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_jeilinj. |
| |
| config USB_GSPCA_JL2005BCD |
| tristate "JL2005B/C/D USB V4L2 driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based the |
| JL2005B, JL2005C, or JL2005D chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_jl2005bcd. |
| |
| config USB_GSPCA_KINECT |
| tristate "Kinect sensor device USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for the Microsoft Kinect sensor device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_kinect. |
| |
| config USB_GSPCA_KONICA |
| tristate "Konica USB Camera V4L2 driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Konica chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_konica. |
| |
| config USB_GSPCA_MARS |
| tristate "Mars USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Mars chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_mars. |
| |
| config USB_GSPCA_MR97310A |
| tristate "Mars-Semi MR97310A USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the MR97310A chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_mr97310a. |
| |
| config USB_GSPCA_NW80X |
| tristate "Divio based (NW80x) USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the NW80x chips. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_nw80x. |
| |
| config USB_GSPCA_OV519 |
| tristate "OV51x / OVFX2 / W996xCF USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on one of these: |
| OV511(+), OV518(+), OV519, OVFX2, W9967CF, W9968CF |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_ov519. |
| |
| config USB_GSPCA_OV534 |
| tristate "OV534 OV772x USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the OV534 chip |
| and sensor OV772x (e.g. Sony Playstation EYE) |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_ov534. |
| |
| config USB_GSPCA_OV534_9 |
| tristate "OV534 OV965x USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the OV534 chip |
| and sensor OV965x (e.g. Hercules Dualpix) |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_ov534_9. |
| |
| config USB_GSPCA_PAC207 |
| tristate "Pixart PAC207 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the PAC207 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_pac207. |
| |
| config USB_GSPCA_PAC7302 |
| tristate "Pixart PAC7302 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the PAC7302 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_pac7302. |
| |
| config USB_GSPCA_PAC7311 |
| tristate "Pixart PAC7311 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the PAC7311 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_pac7311. |
| |
| config USB_GSPCA_SE401 |
| tristate "SE401 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the |
| Endpoints (formerly known as AOX) se401 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_se401. |
| |
| config USB_GSPCA_SN9C2028 |
| tristate "SONIX Dual-Mode USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want streaming support for Sonix SN9C2028 cameras. |
| These are supported as stillcams in libgphoto2/camlibs/sonix. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sn9c2028. |
| |
| config USB_GSPCA_SN9C20X |
| tristate "SN9C20X USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the |
| sn9c20x chips (SN9C201 and SN9C202). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sn9c20x. |
| |
| config USB_GSPCA_SONIXB |
| tristate "SONIX Bayer USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Sonix |
| chips with Bayer format (SN9C101, SN9C102 and SN9C103). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sonixb. |
| |
| config USB_GSPCA_SONIXJ |
| tristate "SONIX JPEG USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Sonix |
| chips with JPEG format (SN9C102P, SN9C105 and >= SN9C110). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sonixj |
| |
| config USB_GSPCA_SPCA500 |
| tristate "SPCA500 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA500 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca500. |
| |
| config USB_GSPCA_SPCA501 |
| tristate "SPCA501 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA501 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca501. |
| |
| config USB_GSPCA_SPCA505 |
| tristate "SPCA505 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA505 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca505. |
| |
| config USB_GSPCA_SPCA506 |
| tristate "SPCA506 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA506 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca506. |
| |
| config USB_GSPCA_SPCA508 |
| tristate "SPCA508 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA508 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca508. |
| |
| config USB_GSPCA_SPCA561 |
| tristate "SPCA561 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA561 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca561. |
| |
| config USB_GSPCA_SPCA1528 |
| tristate "SPCA1528 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SPCA1528 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_spca1528. |
| |
| config USB_GSPCA_SQ905 |
| tristate "SQ Technologies SQ905 based USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SQ905 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sq905. |
| |
| config USB_GSPCA_SQ905C |
| tristate "SQ Technologies SQ905C based USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SQ905C chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sq905c. |
| |
| config USB_GSPCA_SQ930X |
| tristate "SQ Technologies SQ930X based USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the SQ930X chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sq930x. |
| |
| config USB_GSPCA_STK014 |
| tristate "Syntek DV4000 (STK014) USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the STK014 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_stk014. |
| |
| config USB_GSPCA_STK1135 |
| tristate "Syntek STK1135 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the STK1135 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_stk1135. |
| |
| config USB_GSPCA_STV0680 |
| tristate "STV0680 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the STV0680 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_stv0680. |
| |
| config USB_GSPCA_SUNPLUS |
| tristate "SUNPLUS USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the Sunplus |
| SPCA504(abc) SPCA533 SPCA536 chips. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_sunplus. |
| |
| config USB_GSPCA_T613 |
| tristate "T613 (JPEG Compliance) USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the T613 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_t613. |
| |
| config USB_GSPCA_TOPRO |
| tristate "TOPRO USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the |
| TP6800 and TP6810 Topro chips. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_topro. |
| |
| config USB_GSPCA_TOUPTEK |
| tristate "Touptek USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the ToupTek UCMOS |
| / AmScope MU series camera. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_touptek. |
| |
| config USB_GSPCA_TV8532 |
| tristate "TV8532 USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the TV8531 chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_tv8532. |
| |
| config USB_GSPCA_VC032X |
| tristate "VC032X USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the VC032X chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_vc032x. |
| |
| config USB_GSPCA_VICAM |
| tristate "ViCam USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for the 3com homeconnect camera |
| (vicam). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_vicam. |
| |
| config USB_GSPCA_XIRLINK_CIT |
| tristate "Xirlink C-It USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for Xirlink C-It bases cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_xirlink_cit. |
| |
| config USB_GSPCA_ZC3XX |
| tristate "ZC3XX USB Camera Driver" |
| depends on VIDEO_V4L2 && USB_GSPCA |
| help |
| Say Y here if you want support for cameras based on the ZC3XX chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gspca_zc3xx. |
| |
| endif |
