blob: 155731557c9bc08673881520c13d6db825fd91b0 [file] [log] [blame]
#ifndef _ASM_POWERPC_CPUIDLE_H
#define _ASM_POWERPC_CPUIDLE_H
#ifdef CONFIG_PPC_POWERNV
/* Used in powernv idle state management */
#define PNV_THREAD_RUNNING 0
#define PNV_THREAD_NAP 1
#define PNV_THREAD_SLEEP 2
#define PNV_THREAD_WINKLE 3
#define PNV_CORE_IDLE_LOCK_BIT 0x100
#define PNV_CORE_IDLE_THREAD_BITS 0x0FF
/*
* ============================ NOTE =================================
* The older firmware populates only the RL field in the psscr_val and
* sets the psscr_mask to 0xf. On such a firmware, the kernel sets the
* remaining PSSCR fields to default values as follows:
*
* - ESL and EC bits are to 1. So wakeup from any stop state will be
* at vector 0x100.
*
* - MTL and PSLL are set to the maximum allowed value as per the ISA,
* i.e. 15.
*
* - The Transition Rate, TR is set to the Maximum value 3.
*/
#define PSSCR_HV_DEFAULT_VAL (PSSCR_ESL | PSSCR_EC | \
PSSCR_PSLL_MASK | PSSCR_TR_MASK | \
PSSCR_MTL_MASK)
#define PSSCR_HV_DEFAULT_MASK (PSSCR_ESL | PSSCR_EC | \
PSSCR_PSLL_MASK | PSSCR_TR_MASK | \
PSSCR_MTL_MASK | PSSCR_RL_MASK)
#define PSSCR_EC_SHIFT 20
#define PSSCR_ESL_SHIFT 21
#define GET_PSSCR_EC(x) (((x) & PSSCR_EC) >> PSSCR_EC_SHIFT)
#define GET_PSSCR_ESL(x) (((x) & PSSCR_ESL) >> PSSCR_ESL_SHIFT)
#define GET_PSSCR_RL(x) ((x) & PSSCR_RL_MASK)
#define ERR_EC_ESL_MISMATCH -1
#define ERR_DEEP_STATE_ESL_MISMATCH -2
#ifndef __ASSEMBLY__
extern u32 pnv_fastsleep_workaround_at_entry[];
extern u32 pnv_fastsleep_workaround_at_exit[];
extern u64 pnv_first_deep_stop_state;
int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags);
static inline void report_invalid_psscr_val(u64 psscr_val, int err)
{
switch (err) {
case ERR_EC_ESL_MISMATCH:
pr_warn("Invalid psscr 0x%016llx : ESL,EC bits unequal",
psscr_val);
break;
case ERR_DEEP_STATE_ESL_MISMATCH:
pr_warn("Invalid psscr 0x%016llx : ESL cleared for deep stop-state",
psscr_val);
}
}
#endif
#endif
/* Idle state entry routines */
#ifdef CONFIG_PPC_P7_NAP
#define IDLE_STATE_ENTER_SEQ(IDLE_INST) \
/* Magic NAP/SLEEP/WINKLE mode enter sequence */ \
std r0,0(r1); \
ptesync; \
ld r0,0(r1); \
236: cmpd cr0,r0,r0; \
bne 236b; \
IDLE_INST; \
#define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \
IDLE_STATE_ENTER_SEQ(IDLE_INST) \
b .
#endif /* CONFIG_PPC_P7_NAP */
#endif