|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/root_dev.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/clocksource.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/sizes.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/of_clk.h> | 
|  | #include <linux/of_fdt.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/cache.h> | 
|  | #include <uapi/linux/mount.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/arcregs.h> | 
|  | #include <asm/asserts.h> | 
|  | #include <asm/tlb.h> | 
|  | #include <asm/setup.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/unwind.h> | 
|  | #include <asm/mach_desc.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/dsp-impl.h> | 
|  |  | 
|  | #define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x)) | 
|  |  | 
|  | unsigned int intr_to_DE_cnt; | 
|  |  | 
|  | /* Part of U-boot ABI: see head.S */ | 
|  | int __initdata uboot_tag; | 
|  | int __initdata uboot_magic; | 
|  | char __initdata *uboot_arg; | 
|  |  | 
|  | const struct machine_desc *machine_desc; | 
|  |  | 
|  | struct task_struct *_current_task[NR_CPUS];	/* For stack switching */ | 
|  |  | 
|  | struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; | 
|  |  | 
|  | static const struct id_to_str arc_legacy_rel[] = { | 
|  | /* ID.ARCVER,	Release */ | 
|  | #ifdef CONFIG_ISA_ARCOMPACT | 
|  | { 0x34, 	"R4.10"}, | 
|  | { 0x35, 	"R4.11"}, | 
|  | #else | 
|  | { 0x51, 	"R2.0" }, | 
|  | { 0x52, 	"R2.1" }, | 
|  | { 0x53,		"R3.0" }, | 
|  | #endif | 
|  | { 0x00,		NULL   } | 
|  | }; | 
|  |  | 
|  | static const struct id_to_str arc_cpu_rel[] = { | 
|  | /* UARCH.MAJOR,	Release */ | 
|  | {  0,		"R3.10a"}, | 
|  | {  1,		"R3.50a"}, | 
|  | {  0xFF,	NULL   } | 
|  | }; | 
|  |  | 
|  | static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu) | 
|  | { | 
|  | if (is_isa_arcompact()) { | 
|  | struct bcr_iccm_arcompact iccm; | 
|  | struct bcr_dccm_arcompact dccm; | 
|  |  | 
|  | READ_BCR(ARC_REG_ICCM_BUILD, iccm); | 
|  | if (iccm.ver) { | 
|  | cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */ | 
|  | cpu->iccm.base_addr = iccm.base << 16; | 
|  | } | 
|  |  | 
|  | READ_BCR(ARC_REG_DCCM_BUILD, dccm); | 
|  | if (dccm.ver) { | 
|  | unsigned long base; | 
|  | cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */ | 
|  |  | 
|  | base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD); | 
|  | cpu->dccm.base_addr = base & ~0xF; | 
|  | } | 
|  | } else { | 
|  | struct bcr_iccm_arcv2 iccm; | 
|  | struct bcr_dccm_arcv2 dccm; | 
|  | unsigned long region; | 
|  |  | 
|  | READ_BCR(ARC_REG_ICCM_BUILD, iccm); | 
|  | if (iccm.ver) { | 
|  | cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */ | 
|  | if (iccm.sz00 == 0xF && iccm.sz01 > 0) | 
|  | cpu->iccm.sz <<= iccm.sz01; | 
|  |  | 
|  | region = read_aux_reg(ARC_REG_AUX_ICCM); | 
|  | cpu->iccm.base_addr = region & 0xF0000000; | 
|  | } | 
|  |  | 
|  | READ_BCR(ARC_REG_DCCM_BUILD, dccm); | 
|  | if (dccm.ver) { | 
|  | cpu->dccm.sz = 256 << dccm.sz0; | 
|  | if (dccm.sz0 == 0xF && dccm.sz1 > 0) | 
|  | cpu->dccm.sz <<= dccm.sz1; | 
|  |  | 
|  | region = read_aux_reg(ARC_REG_AUX_DCCM); | 
|  | cpu->dccm.base_addr = region & 0xF0000000; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void decode_arc_core(struct cpuinfo_arc *cpu) | 
|  | { | 
|  | struct bcr_uarch_build_arcv2 uarch; | 
|  | const struct id_to_str *tbl; | 
|  |  | 
|  | /* | 
|  | * Up until (including) the first core4 release (0x54) things were | 
|  | * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family | 
|  | * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue) | 
|  | */ | 
|  |  | 
|  | if (cpu->core.family < 0x54) { /* includes arc700 */ | 
|  |  | 
|  | for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) { | 
|  | if (cpu->core.family == tbl->id) { | 
|  | cpu->release = tbl->str; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (is_isa_arcompact()) | 
|  | cpu->name = "ARC700"; | 
|  | else if (tbl->str) | 
|  | cpu->name = "HS38"; | 
|  | else | 
|  | cpu->name = cpu->release = "Unknown"; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * However the subsequent HS release (same 0x54) allow HS38 or HS48 | 
|  | * configurations and encode this info in a different BCR. | 
|  | * The BCR was introduced in 0x54 so can't be read unconditionally. | 
|  | */ | 
|  |  | 
|  | READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch); | 
|  |  | 
|  | if (uarch.prod == 4) { | 
|  | cpu->name = "HS48"; | 
|  | cpu->extn.dual = 1; | 
|  |  | 
|  | } else { | 
|  | cpu->name = "HS38"; | 
|  | } | 
|  |  | 
|  | for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) { | 
|  | if (uarch.maj == tbl->id) { | 
|  | cpu->release = tbl->str; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void read_arc_build_cfg_regs(void) | 
|  | { | 
|  | struct bcr_timer timer; | 
|  | struct bcr_generic bcr; | 
|  | struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; | 
|  | struct bcr_isa_arcv2 isa; | 
|  | struct bcr_actionpoint ap; | 
|  |  | 
|  | FIX_PTR(cpu); | 
|  |  | 
|  | READ_BCR(AUX_IDENTITY, cpu->core); | 
|  | decode_arc_core(cpu); | 
|  |  | 
|  | READ_BCR(ARC_REG_TIMERS_BCR, timer); | 
|  | cpu->extn.timer0 = timer.t0; | 
|  | cpu->extn.timer1 = timer.t1; | 
|  | cpu->extn.rtc = timer.rtc; | 
|  |  | 
|  | cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE); | 
|  |  | 
|  | READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy); | 
|  |  | 
|  | /* Read CCM BCRs for boot reporting even if not enabled in Kconfig */ | 
|  | read_decode_ccm_bcr(cpu); | 
|  |  | 
|  | read_decode_mmu_bcr(); | 
|  | read_decode_cache_bcr(); | 
|  |  | 
|  | if (is_isa_arcompact()) { | 
|  | struct bcr_fp_arcompact sp, dp; | 
|  | struct bcr_bpu_arcompact bpu; | 
|  |  | 
|  | READ_BCR(ARC_REG_FP_BCR, sp); | 
|  | READ_BCR(ARC_REG_DPFP_BCR, dp); | 
|  | cpu->extn.fpu_sp = sp.ver ? 1 : 0; | 
|  | cpu->extn.fpu_dp = dp.ver ? 1 : 0; | 
|  |  | 
|  | READ_BCR(ARC_REG_BPU_BCR, bpu); | 
|  | cpu->bpu.ver = bpu.ver; | 
|  | cpu->bpu.full = bpu.fam ? 1 : 0; | 
|  | if (bpu.ent) { | 
|  | cpu->bpu.num_cache = 256 << (bpu.ent - 1); | 
|  | cpu->bpu.num_pred = 256 << (bpu.ent - 1); | 
|  | } | 
|  | } else { | 
|  | struct bcr_fp_arcv2 spdp; | 
|  | struct bcr_bpu_arcv2 bpu; | 
|  |  | 
|  | READ_BCR(ARC_REG_FP_V2_BCR, spdp); | 
|  | cpu->extn.fpu_sp = spdp.sp ? 1 : 0; | 
|  | cpu->extn.fpu_dp = spdp.dp ? 1 : 0; | 
|  |  | 
|  | READ_BCR(ARC_REG_BPU_BCR, bpu); | 
|  | cpu->bpu.ver = bpu.ver; | 
|  | cpu->bpu.full = bpu.ft; | 
|  | cpu->bpu.num_cache = 256 << bpu.bce; | 
|  | cpu->bpu.num_pred = 2048 << bpu.pte; | 
|  | cpu->bpu.ret_stk = 4 << bpu.rse; | 
|  |  | 
|  | /* if dual issue hardware, is it enabled ? */ | 
|  | if (cpu->extn.dual) { | 
|  | unsigned int exec_ctrl; | 
|  |  | 
|  | READ_BCR(AUX_EXEC_CTRL, exec_ctrl); | 
|  | cpu->extn.dual_enb = !(exec_ctrl & 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | READ_BCR(ARC_REG_AP_BCR, ap); | 
|  | if (ap.ver) { | 
|  | cpu->extn.ap_num = 2 << ap.num; | 
|  | cpu->extn.ap_full = !ap.min; | 
|  | } | 
|  |  | 
|  | READ_BCR(ARC_REG_SMART_BCR, bcr); | 
|  | cpu->extn.smart = bcr.ver ? 1 : 0; | 
|  |  | 
|  | READ_BCR(ARC_REG_RTT_BCR, bcr); | 
|  | cpu->extn.rtt = bcr.ver ? 1 : 0; | 
|  |  | 
|  | READ_BCR(ARC_REG_ISA_CFG_BCR, isa); | 
|  |  | 
|  | /* some hacks for lack of feature BCR info in old ARC700 cores */ | 
|  | if (is_isa_arcompact()) { | 
|  | if (!isa.ver)	/* ISA BCR absent, use Kconfig info */ | 
|  | cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC); | 
|  | else { | 
|  | /* ARC700_BUILD only has 2 bits of isa info */ | 
|  | struct bcr_generic bcr = *(struct bcr_generic *)&isa; | 
|  | cpu->isa.atomic = bcr.info & 1; | 
|  | } | 
|  |  | 
|  | cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN); | 
|  |  | 
|  | /* there's no direct way to distinguish 750 vs. 770 */ | 
|  | if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3)) | 
|  | cpu->name = "ARC750"; | 
|  | } else { | 
|  | cpu->isa = isa; | 
|  | } | 
|  | } | 
|  |  | 
|  | static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) | 
|  | { | 
|  | struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; | 
|  | struct bcr_identity *core = &cpu->core; | 
|  | char mpy_opt[16]; | 
|  | int n = 0; | 
|  |  | 
|  | FIX_PTR(cpu); | 
|  |  | 
|  | n += scnprintf(buf + n, len - n, | 
|  | "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n", | 
|  | core->family, core->cpu_id, core->chip_id); | 
|  |  | 
|  | n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n", | 
|  | cpu_id, cpu->name, cpu->release, | 
|  | is_isa_arcompact() ? "ARCompact" : "ARCv2", | 
|  | IS_AVAIL1(cpu->isa.be, "[Big-Endian]"), | 
|  | IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue ")); | 
|  |  | 
|  | n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ", | 
|  | IS_AVAIL1(cpu->extn.timer0, "Timer0 "), | 
|  | IS_AVAIL1(cpu->extn.timer1, "Timer1 "), | 
|  | IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT), | 
|  | IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT)); | 
|  |  | 
|  | if (cpu->extn_mpy.ver) { | 
|  | if (is_isa_arcompact()) { | 
|  | scnprintf(mpy_opt, 16, "mpy"); | 
|  | } else { | 
|  |  | 
|  | int opt = 2;	/* stock MPY/MPYH */ | 
|  |  | 
|  | if (cpu->extn_mpy.dsp)	/* OPT 7-9 */ | 
|  | opt = cpu->extn_mpy.dsp + 6; | 
|  |  | 
|  | scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt); | 
|  | } | 
|  | } | 
|  |  | 
|  | n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n", | 
|  | IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC), | 
|  | IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64), | 
|  | IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS), | 
|  | IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt), | 
|  | IS_AVAIL1(cpu->isa.div_rem, "div_rem ")); | 
|  |  | 
|  | if (cpu->bpu.ver) { | 
|  | n += scnprintf(buf + n, len - n, | 
|  | "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d", | 
|  | IS_AVAIL1(cpu->bpu.full, "full"), | 
|  | IS_AVAIL1(!cpu->bpu.full, "partial"), | 
|  | cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk); | 
|  |  | 
|  | if (is_isa_arcv2()) { | 
|  | struct bcr_lpb lpb; | 
|  |  | 
|  | READ_BCR(ARC_REG_LPB_BUILD, lpb); | 
|  | if (lpb.ver) { | 
|  | unsigned int ctl; | 
|  | ctl = read_aux_reg(ARC_REG_LPB_CTRL); | 
|  |  | 
|  | n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s", | 
|  | lpb.entries, | 
|  | IS_DISABLED_RUN(!ctl)); | 
|  | } | 
|  | } | 
|  | n += scnprintf(buf + n, len - n, "\n"); | 
|  | } | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) | 
|  | { | 
|  | int n = 0; | 
|  | struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; | 
|  |  | 
|  | FIX_PTR(cpu); | 
|  |  | 
|  | n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base); | 
|  |  | 
|  | if (cpu->extn.fpu_sp || cpu->extn.fpu_dp) | 
|  | n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n", | 
|  | IS_AVAIL1(cpu->extn.fpu_sp, "SP "), | 
|  | IS_AVAIL1(cpu->extn.fpu_dp, "DP ")); | 
|  |  | 
|  | if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) { | 
|  | n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s", | 
|  | IS_AVAIL1(cpu->extn.smart, "smaRT "), | 
|  | IS_AVAIL1(cpu->extn.rtt, "RTT ")); | 
|  | if (cpu->extn.ap_num) { | 
|  | n += scnprintf(buf + n, len - n, "ActionPoint %d/%s", | 
|  | cpu->extn.ap_num, | 
|  | cpu->extn.ap_full ? "full":"min"); | 
|  | } | 
|  | n += scnprintf(buf + n, len - n, "\n"); | 
|  | } | 
|  |  | 
|  | if (cpu->dccm.sz || cpu->iccm.sz) | 
|  | n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n", | 
|  | cpu->dccm.base_addr, TO_KB(cpu->dccm.sz), | 
|  | cpu->iccm.base_addr, TO_KB(cpu->iccm.sz)); | 
|  |  | 
|  | if (is_isa_arcv2()) { | 
|  |  | 
|  | /* Error Protection: ECC/Parity */ | 
|  | struct bcr_erp erp; | 
|  | READ_BCR(ARC_REG_ERP_BUILD, erp); | 
|  |  | 
|  | if (erp.ver) { | 
|  | struct  ctl_erp ctl; | 
|  | READ_BCR(ARC_REG_ERP_CTRL, ctl); | 
|  |  | 
|  | /* inverted bits: 0 means enabled */ | 
|  | n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n", | 
|  | IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "), | 
|  | IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "), | 
|  | IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU ")); | 
|  | } | 
|  | } | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena) | 
|  | { | 
|  | if (hw_exists && !opt_ena) | 
|  | pr_warn(" ! Enable %s for working apps\n", opt_name); | 
|  | else if (!hw_exists && opt_ena) | 
|  | panic("Disable %s, hardware NOT present\n", opt_name); | 
|  | } | 
|  |  | 
|  | void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena) | 
|  | { | 
|  | if (!hw_exists && opt_ena) | 
|  | panic("Disable %s, hardware NOT present\n", opt_name); | 
|  | } | 
|  |  | 
|  | static void arc_chk_core_config(void) | 
|  | { | 
|  | struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; | 
|  | int present = 0; | 
|  |  | 
|  | if (!cpu->extn.timer0) | 
|  | panic("Timer0 is not present!\n"); | 
|  |  | 
|  | if (!cpu->extn.timer1) | 
|  | panic("Timer1 is not present!\n"); | 
|  |  | 
|  | #ifdef CONFIG_ARC_HAS_DCCM | 
|  | /* | 
|  | * DCCM can be arbit placed in hardware. | 
|  | * Make sure it's placement/sz matches what Linux is built with | 
|  | */ | 
|  | if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr) | 
|  | panic("Linux built with incorrect DCCM Base address\n"); | 
|  |  | 
|  | if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz) | 
|  | panic("Linux built with incorrect DCCM Size\n"); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_ARC_HAS_ICCM | 
|  | if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz) | 
|  | panic("Linux built with incorrect ICCM Size\n"); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * FP hardware/software config sanity | 
|  | * -If hardware present, kernel needs to save/restore FPU state | 
|  | * -If not, it will crash trying to save/restore the non-existant regs | 
|  | */ | 
|  |  | 
|  | if (is_isa_arcompact()) { | 
|  | /* only DPDP checked since SP has no arch visible regs */ | 
|  | present = cpu->extn.fpu_dp; | 
|  | CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present); | 
|  | } else { | 
|  | /* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */ | 
|  | present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp; | 
|  | CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present); | 
|  |  | 
|  | dsp_config_check(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initialize and setup the processor core | 
|  | * This is called by all the CPUs thus should not do special case stuff | 
|  | *    such as only for boot CPU etc | 
|  | */ | 
|  |  | 
|  | void setup_processor(void) | 
|  | { | 
|  | char str[512]; | 
|  | int cpu_id = smp_processor_id(); | 
|  |  | 
|  | read_arc_build_cfg_regs(); | 
|  | arc_init_IRQ(); | 
|  |  | 
|  | pr_info("%s", arc_cpu_mumbojumbo(cpu_id, str, sizeof(str))); | 
|  |  | 
|  | arc_mmu_init(); | 
|  | arc_cache_init(); | 
|  |  | 
|  | pr_info("%s", arc_extn_mumbojumbo(cpu_id, str, sizeof(str))); | 
|  | pr_info("%s", arc_platform_smp_cpuinfo()); | 
|  |  | 
|  | arc_chk_core_config(); | 
|  | } | 
|  |  | 
|  | static inline bool uboot_arg_invalid(unsigned long addr) | 
|  | { | 
|  | /* | 
|  | * Check that it is a untranslated address (although MMU is not enabled | 
|  | * yet, it being a high address ensures this is not by fluke) | 
|  | */ | 
|  | if (addr < PAGE_OFFSET) | 
|  | return true; | 
|  |  | 
|  | /* Check that address doesn't clobber resident kernel image */ | 
|  | return addr >= (unsigned long)_stext && addr <= (unsigned long)_end; | 
|  | } | 
|  |  | 
|  | #define IGNORE_ARGS		"Ignore U-boot args: " | 
|  |  | 
|  | /* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */ | 
|  | #define UBOOT_TAG_NONE		0 | 
|  | #define UBOOT_TAG_CMDLINE	1 | 
|  | #define UBOOT_TAG_DTB		2 | 
|  | /* We always pass 0 as magic from U-boot */ | 
|  | #define UBOOT_MAGIC_VALUE	0 | 
|  |  | 
|  | void __init handle_uboot_args(void) | 
|  | { | 
|  | bool use_embedded_dtb = true; | 
|  | bool append_cmdline = false; | 
|  |  | 
|  | /* check that we know this tag */ | 
|  | if (uboot_tag != UBOOT_TAG_NONE && | 
|  | uboot_tag != UBOOT_TAG_CMDLINE && | 
|  | uboot_tag != UBOOT_TAG_DTB) { | 
|  | pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag); | 
|  | goto ignore_uboot_args; | 
|  | } | 
|  |  | 
|  | if (uboot_magic != UBOOT_MAGIC_VALUE) { | 
|  | pr_warn(IGNORE_ARGS "non zero uboot magic\n"); | 
|  | goto ignore_uboot_args; | 
|  | } | 
|  |  | 
|  | if (uboot_tag != UBOOT_TAG_NONE && | 
|  | uboot_arg_invalid((unsigned long)uboot_arg)) { | 
|  | pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg); | 
|  | goto ignore_uboot_args; | 
|  | } | 
|  |  | 
|  | /* see if U-boot passed an external Device Tree blob */ | 
|  | if (uboot_tag == UBOOT_TAG_DTB) { | 
|  | machine_desc = setup_machine_fdt((void *)uboot_arg); | 
|  |  | 
|  | /* external Device Tree blob is invalid - use embedded one */ | 
|  | use_embedded_dtb = !machine_desc; | 
|  | } | 
|  |  | 
|  | if (uboot_tag == UBOOT_TAG_CMDLINE) | 
|  | append_cmdline = true; | 
|  |  | 
|  | ignore_uboot_args: | 
|  |  | 
|  | if (use_embedded_dtb) { | 
|  | machine_desc = setup_machine_fdt(__dtb_start); | 
|  | if (!machine_desc) | 
|  | panic("Embedded DT invalid\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NOTE: @boot_command_line is populated by setup_machine_fdt() so this | 
|  | * append processing can only happen after. | 
|  | */ | 
|  | if (append_cmdline) { | 
|  | /* Ensure a whitespace between the 2 cmdlines */ | 
|  | strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); | 
|  | strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE); | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init setup_arch(char **cmdline_p) | 
|  | { | 
|  | handle_uboot_args(); | 
|  |  | 
|  | /* Save unparsed command line copy for /proc/cmdline */ | 
|  | *cmdline_p = boot_command_line; | 
|  |  | 
|  | /* To force early parsing of things like mem=xxx */ | 
|  | parse_early_param(); | 
|  |  | 
|  | /* Platform/board specific: e.g. early console registration */ | 
|  | if (machine_desc->init_early) | 
|  | machine_desc->init_early(); | 
|  |  | 
|  | smp_init_cpus(); | 
|  |  | 
|  | setup_processor(); | 
|  | setup_arch_memory(); | 
|  |  | 
|  | /* copy flat DT out of .init and then unflatten it */ | 
|  | unflatten_and_copy_device_tree(); | 
|  |  | 
|  | /* Can be issue if someone passes cmd line arg "ro" | 
|  | * But that is unlikely so keeping it as it is | 
|  | */ | 
|  | root_mountflags &= ~MS_RDONLY; | 
|  |  | 
|  | arc_unwind_init(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called from start_kernel() - boot CPU only | 
|  | */ | 
|  | void __init time_init(void) | 
|  | { | 
|  | of_clk_init(NULL); | 
|  | timer_probe(); | 
|  | } | 
|  |  | 
|  | static int __init customize_machine(void) | 
|  | { | 
|  | if (machine_desc->init_machine) | 
|  | machine_desc->init_machine(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | arch_initcall(customize_machine); | 
|  |  | 
|  | static int __init init_late_machine(void) | 
|  | { | 
|  | if (machine_desc->init_late) | 
|  | machine_desc->init_late(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | late_initcall(init_late_machine); | 
|  | /* | 
|  | *  Get CPU information for use by the procfs. | 
|  | */ | 
|  |  | 
|  | #define cpu_to_ptr(c)	((void *)(0xFFFF0000 | (unsigned int)(c))) | 
|  | #define ptr_to_cpu(p)	(~0xFFFF0000UL & (unsigned int)(p)) | 
|  |  | 
|  | static int show_cpuinfo(struct seq_file *m, void *v) | 
|  | { | 
|  | char *str; | 
|  | int cpu_id = ptr_to_cpu(v); | 
|  | struct device *cpu_dev = get_cpu_device(cpu_id); | 
|  | struct clk *cpu_clk; | 
|  | unsigned long freq = 0; | 
|  |  | 
|  | if (!cpu_online(cpu_id)) { | 
|  | seq_printf(m, "processor [%d]\t: Offline\n", cpu_id); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | str = (char *)__get_free_page(GFP_KERNEL); | 
|  | if (!str) | 
|  | goto done; | 
|  |  | 
|  | seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE)); | 
|  |  | 
|  | cpu_clk = clk_get(cpu_dev, NULL); | 
|  | if (IS_ERR(cpu_clk)) { | 
|  | seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n", | 
|  | cpu_id); | 
|  | } else { | 
|  | freq = clk_get_rate(cpu_clk); | 
|  | } | 
|  | if (freq) | 
|  | seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n", | 
|  | freq / 1000000, (freq / 10000) % 100); | 
|  |  | 
|  | seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n", | 
|  | loops_per_jiffy / (500000 / HZ), | 
|  | (loops_per_jiffy / (5000 / HZ)) % 100); | 
|  |  | 
|  | seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE)); | 
|  | seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE)); | 
|  | seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE)); | 
|  | seq_printf(m, arc_platform_smp_cpuinfo()); | 
|  |  | 
|  | free_page((unsigned long)str); | 
|  | done: | 
|  | seq_printf(m, "\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void *c_start(struct seq_file *m, loff_t *pos) | 
|  | { | 
|  | /* | 
|  | * Callback returns cpu-id to iterator for show routine, NULL to stop. | 
|  | * However since NULL is also a valid cpu-id (0), we use a round-about | 
|  | * way to pass it w/o having to kmalloc/free a 2 byte string. | 
|  | * Encode cpu-id as 0xFFcccc, which is decoded by show routine. | 
|  | */ | 
|  | return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL; | 
|  | } | 
|  |  | 
|  | static void *c_next(struct seq_file *m, void *v, loff_t *pos) | 
|  | { | 
|  | ++*pos; | 
|  | return c_start(m, pos); | 
|  | } | 
|  |  | 
|  | static void c_stop(struct seq_file *m, void *v) | 
|  | { | 
|  | } | 
|  |  | 
|  | const struct seq_operations cpuinfo_op = { | 
|  | .start	= c_start, | 
|  | .next	= c_next, | 
|  | .stop	= c_stop, | 
|  | .show	= show_cpuinfo | 
|  | }; | 
|  |  | 
|  | static DEFINE_PER_CPU(struct cpu, cpu_topology); | 
|  |  | 
|  | static int __init topology_init(void) | 
|  | { | 
|  | int cpu; | 
|  |  | 
|  | for_each_present_cpu(cpu) | 
|  | register_cpu(&per_cpu(cpu_topology, cpu), cpu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(topology_init); |