| // SPDX-License-Identifier: GPL-2.0-or-later |
| // Copyright 2019 IBM Corp. |
| /dts-v1/; |
| |
| #include "aspeed-g6.dtsi" |
| #include <dt-bindings/gpio/aspeed-gpio.h> |
| #include <dt-bindings/i2c/i2c.h> |
| #include <dt-bindings/leds/leds-pca955x.h> |
| |
| / { |
| model = "Rainier 2U"; |
| compatible = "ibm,rainier-bmc", "aspeed,ast2600"; |
| |
| aliases { |
| serial4 = &uart5; |
| i2c16 = &i2c2mux0; |
| i2c17 = &i2c2mux1; |
| i2c18 = &i2c2mux2; |
| i2c19 = &i2c2mux3; |
| |
| spi10 = &cfam0_spi0; |
| spi11 = &cfam0_spi1; |
| spi12 = &cfam0_spi2; |
| spi13 = &cfam0_spi3; |
| spi20 = &cfam1_spi0; |
| spi21 = &cfam1_spi1; |
| spi22 = &cfam1_spi2; |
| spi23 = &cfam1_spi3; |
| spi30 = &cfam2_spi0; |
| spi31 = &cfam2_spi1; |
| spi32 = &cfam2_spi2; |
| spi33 = &cfam2_spi3; |
| }; |
| |
| chosen { |
| stdout-path = &uart5; |
| bootargs = "console=ttyS4,115200n8"; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| flash_memory: region@b8000000 { |
| no-map; |
| reg = <0xb8000000 0x04000000>; /* 64M */ |
| }; |
| |
| ramoops@bc000000 { |
| compatible = "ramoops"; |
| reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ |
| record-size = <0x8000>; |
| console-size = <0x8000>; |
| pmsg-size = <0x8000>; |
| max-reason = <3>; /* KMSG_DUMP_EMERG */ |
| }; |
| |
| vga_memory: region@bf000000 { |
| no-map; |
| compatible = "shared-dma-pool"; |
| reg = <0xbf000000 0x01000000>; /* 16M */ |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| ps0-presence { |
| label = "ps0-presence"; |
| gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; |
| linux,code = <ASPEED_GPIO(S, 0)>; |
| }; |
| |
| ps1-presence { |
| label = "ps1-presence"; |
| gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; |
| linux,code = <ASPEED_GPIO(S, 1)>; |
| }; |
| |
| ps2-presence { |
| label = "ps2-presence"; |
| gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; |
| linux,code = <ASPEED_GPIO(S, 2)>; |
| }; |
| |
| ps3-presence { |
| label = "ps3-presence"; |
| gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; |
| linux,code = <ASPEED_GPIO(S, 3)>; |
| }; |
| }; |
| |
| i2c2mux: i2cmux { |
| compatible = "i2c-mux-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| i2c-parent = <&i2c2>; |
| mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, |
| <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; |
| idle-state = <0>; |
| |
| i2c2mux0: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| }; |
| |
| i2c2mux1: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| }; |
| |
| i2c2mux2: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| }; |
| |
| i2c2mux3: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| }; |
| }; |
| }; |
| |
| &ehci1 { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| gpio-line-names = |
| /*A0-A7*/ "","","","","","","","", |
| /*B0-B7*/ "","","","","","","checkstop","", |
| /*C0-C7*/ "","","","","","","","", |
| /*D0-D7*/ "","","","","","","","", |
| /*E0-E7*/ "","","","","","","","", |
| /*F0-F7*/ "","","","","","","","", |
| /*G0-G7*/ "","","","","","","","", |
| /*H0-H7*/ "","","","","","","","", |
| /*I0-I7*/ "","","","","","","","", |
| /*J0-J7*/ "","","","","","","","", |
| /*K0-K7*/ "","","","","","","","", |
| /*L0-L7*/ "","","","","","","","", |
| /*M0-M7*/ "","","","","","","","", |
| /*N0-N7*/ "","","","","","","","", |
| /*O0-O7*/ "","","","usb-power","","","","", |
| /*P0-P7*/ "","","","","","","","", |
| /*Q0-Q7*/ "cfam-reset","","","","","","","", |
| /*R0-R7*/ "","","","","","","","", |
| /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", |
| "","","","", |
| /*T0-T7*/ "","","","","","","","", |
| /*U0-U7*/ "","","","","","","","", |
| /*V0-V7*/ "","","","","","","","", |
| /*W0-W7*/ "","","","","","","","", |
| /*X0-X7*/ "","","","","","","","", |
| /*Y0-Y7*/ "","","","","","","","", |
| /*Z0-Z7*/ "","","","","","","","", |
| /*AA0-AA7*/ "","","","","","","","", |
| /*AB0-AB7*/ "","","","","","","","", |
| /*AC0-AC7*/ "","","","","","","",""; |
| |
| pin_mclr_vpp { |
| gpio-hog; |
| gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>; |
| output-high; |
| line-name = "mclr_vpp"; |
| }; |
| |
| i2c3_mux_oe_n { |
| gpio-hog; |
| gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; |
| output-high; |
| line-name = "I2C3_MUX_OE_N"; |
| }; |
| }; |
| |
| &emmc_controller { |
| status = "okay"; |
| }; |
| |
| &pinctrl_emmc_default { |
| bias-disable; |
| }; |
| |
| &emmc { |
| status = "okay"; |
| }; |
| |
| &fsim0 { |
| status = "okay"; |
| |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| /* |
| * CFAM Reset is supposed to be active low but pass1 hardware is wired |
| * active high. |
| */ |
| cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; |
| |
| cfam@0,0 { |
| reg = <0 0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| chip-id = <0>; |
| |
| scom@1000 { |
| compatible = "ibm,fsi2pib"; |
| reg = <0x1000 0x400>; |
| }; |
| |
| i2c@1800 { |
| compatible = "ibm,fsi-i2c-master"; |
| reg = <0x1800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| fsi2spi@1c00 { |
| compatible = "ibm,fsi2spi"; |
| reg = <0x1c00 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cfam0_spi0: spi@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam0_spi1: spi@20 { |
| reg = <0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam0_spi2: spi@40 { |
| reg = <0x40>; |
| compatible = "ibm,fsi2spi-restricted"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam0_spi3: spi@60 { |
| reg = <0x60>; |
| compatible = "ibm,fsi2spi-restricted"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| }; |
| |
| sbefifo@2400 { |
| compatible = "ibm,p9-sbefifo"; |
| reg = <0x2400 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fsi_occ0: occ { |
| compatible = "ibm,p10-occ"; |
| }; |
| }; |
| |
| fsi_hub0: hub@3400 { |
| compatible = "fsi-master-hub"; |
| reg = <0x3400 0x400>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| no-scan-on-init; |
| }; |
| }; |
| }; |
| |
| &fsi_hub0 { |
| cfam@1,0 { |
| reg = <1 0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| chip-id = <1>; |
| |
| scom@1000 { |
| compatible = "ibm,fsi2pib"; |
| reg = <0x1000 0x400>; |
| }; |
| |
| i2c@1800 { |
| compatible = "ibm,fsi-i2c-master"; |
| reg = <0x1800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| fsi2spi@1c00 { |
| compatible = "ibm,fsi2spi"; |
| reg = <0x1c00 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cfam1_spi0: spi@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam1_spi1: spi@20 { |
| reg = <0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam1_spi2: spi@40 { |
| reg = <0x40>; |
| compatible = "ibm,fsi2spi-restricted"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam1_spi3: spi@60 { |
| reg = <0x60>; |
| compatible = "ibm,fsi2spi-restricted"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| }; |
| |
| sbefifo@2400 { |
| compatible = "ibm,p9-sbefifo"; |
| reg = <0x2400 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fsi_occ1: occ { |
| compatible = "ibm,p10-occ"; |
| }; |
| }; |
| |
| fsi_hub1: hub@3400 { |
| compatible = "fsi-master-hub"; |
| reg = <0x3400 0x400>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| no-scan-on-init; |
| }; |
| }; |
| |
| cfam@2,0 { |
| reg = <2 0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| chip-id = <2>; |
| |
| scom@1000 { |
| compatible = "ibm,fsi2pib"; |
| reg = <0x1000 0x400>; |
| }; |
| |
| i2c@1800 { |
| compatible = "ibm,fsi-i2c-master"; |
| reg = <0x1800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| fsi2spi@1c00 { |
| compatible = "ibm,fsi2spi"; |
| reg = <0x1c00 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cfam2_spi0: spi@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam2_spi1: spi@20 { |
| reg = <0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam2_spi2: spi@40 { |
| reg = <0x40>; |
| compatible = "ibm,fsi2spi-restricted"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| |
| cfam2_spi3: spi@60 { |
| reg = <0x60>; |
| compatible = "ibm,fsi2spi-restricted"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| at25,byte-len = <0x80000>; |
| at25,addr-mode = <4>; |
| at25,page-size = <256>; |
| |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| }; |
| }; |
| |
| sbefifo@2400 { |
| compatible = "ibm,p9-sbefifo"; |
| reg = <0x2400 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fsi_occ2: occ { |
| compatible = "ibm,p10-occ"; |
| }; |
| }; |
| |
| fsi_hub2: hub@3400 { |
| compatible = "fsi-master-hub"; |
| reg = <0x3400 0x400>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| no-scan-on-init; |
| }; |
| }; |
| }; |
| |
| /* Legacy OCC numbering (to get rid of when userspace is fixed) */ |
| &fsi_occ0 { |
| reg = <1>; |
| }; |
| |
| &fsi_occ1 { |
| reg = <2>; |
| }; |
| |
| &fsi_occ2 { |
| reg = <3>; |
| }; |
| |
| &ibt { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| |
| tca9554@40 { |
| compatible = "ti,tca9554"; |
| reg = <0x40>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| smbus0 { |
| gpio-hog; |
| gpios = <4 GPIO_ACTIVE_HIGH>; |
| output-high; |
| line-name = "smbus0"; |
| }; |
| }; |
| |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| |
| power-supply@68 { |
| compatible = "ibm,cffps"; |
| reg = <0x68>; |
| }; |
| |
| power-supply@69 { |
| compatible = "ibm,cffps"; |
| reg = <0x69>; |
| }; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| |
| tmp275@48 { |
| compatible = "ti,tmp275"; |
| reg = <0x48>; |
| }; |
| |
| tmp275@49 { |
| compatible = "ti,tmp275"; |
| reg = <0x49>; |
| }; |
| |
| tmp275@4a { |
| compatible = "ti,tmp275"; |
| reg = <0x4a>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| |
| eeprom@52 { |
| compatible = "atmel,24c64"; |
| reg = <0x52>; |
| }; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| |
| tmp275@48 { |
| compatible = "ti,tmp275"; |
| reg = <0x48>; |
| }; |
| |
| tmp275@49 { |
| compatible = "ti,tmp275"; |
| reg = <0x49>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &i2c6 { |
| status = "okay"; |
| |
| tmp275@48 { |
| compatible = "ti,tmp275"; |
| reg = <0x48>; |
| }; |
| |
| tmp275@4a { |
| compatible = "ti,tmp275"; |
| reg = <0x4a>; |
| }; |
| |
| tmp275@4b { |
| compatible = "ti,tmp275"; |
| reg = <0x4b>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| |
| eeprom@52 { |
| compatible = "atmel,24c64"; |
| reg = <0x52>; |
| }; |
| |
| eeprom@53 { |
| compatible = "atmel,24c64"; |
| reg = <0x53>; |
| }; |
| }; |
| |
| &i2c7 { |
| multi-master; |
| status = "okay"; |
| |
| si7021-a20@20 { |
| compatible = "silabs,si7020"; |
| reg = <0x20>; |
| }; |
| |
| tmp275@48 { |
| compatible = "ti,tmp275"; |
| reg = <0x48>; |
| }; |
| |
| max31785@52 { |
| compatible = "maxim,max31785a"; |
| reg = <0x52>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fan0: fan@0 { |
| compatible = "pmbus-fan"; |
| reg = <0>; |
| tach-pulses = <2>; |
| }; |
| |
| fan1: fan@1 { |
| compatible = "pmbus-fan"; |
| reg = <1>; |
| tach-pulses = <2>; |
| }; |
| |
| fan2: fan@2 { |
| compatible = "pmbus-fan"; |
| reg = <2>; |
| tach-pulses = <2>; |
| }; |
| |
| fan3: fan@3 { |
| compatible = "pmbus-fan"; |
| reg = <3>; |
| tach-pulses = <2>; |
| }; |
| }; |
| |
| pca0: pca9552@61 { |
| compatible = "nxp,pca9552"; |
| reg = <0x61>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@7 { |
| reg = <7>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@8 { |
| reg = <8>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@9 { |
| reg = <9>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@10 { |
| reg = <10>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@11 { |
| reg = <11>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@12 { |
| reg = <12>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@13 { |
| reg = <13>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@14 { |
| reg = <14>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@15 { |
| reg = <15>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| |
| ibm-panel@62 { |
| compatible = "ibm,op-panel"; |
| reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; |
| }; |
| |
| dps: dps310@76 { |
| compatible = "infineon,dps310"; |
| reg = <0x76>; |
| #io-channel-cells = <0>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &i2c8 { |
| status = "okay"; |
| |
| ucd90320@11 { |
| compatible = "ti,ucd90320"; |
| reg = <0x11>; |
| }; |
| |
| rtc@32 { |
| compatible = "epson,rx8900"; |
| reg = <0x32>; |
| }; |
| |
| tmp275@48 { |
| compatible = "ti,tmp275"; |
| reg = <0x48>; |
| }; |
| |
| tmp275@4a { |
| compatible = "ti,tmp275"; |
| reg = <0x4a>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| |
| pca1: pca9552@61 { |
| compatible = "nxp,pca9552"; |
| reg = <0x61>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@7 { |
| reg = <7>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@8 { |
| reg = <8>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@9 { |
| reg = <9>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@10 { |
| reg = <10>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@11 { |
| reg = <11>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@12 { |
| reg = <12>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@13 { |
| reg = <13>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@14 { |
| reg = <14>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@15 { |
| reg = <15>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| |
| }; |
| |
| &i2c9 { |
| status = "okay"; |
| |
| tmp423a@4c { |
| compatible = "ti,tmp423"; |
| reg = <0x4c>; |
| }; |
| |
| tmp423b@4d { |
| compatible = "ti,tmp423"; |
| reg = <0x4d>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| &i2c10 { |
| status = "okay"; |
| |
| tmp423a@4c { |
| compatible = "ti,tmp423"; |
| reg = <0x4c>; |
| }; |
| |
| tmp423b@4d { |
| compatible = "ti,tmp423"; |
| reg = <0x4d>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| &i2c11 { |
| status = "okay"; |
| |
| tmp275@48 { |
| compatible = "ti,tmp275"; |
| reg = <0x48>; |
| }; |
| |
| tmp275@49 { |
| compatible = "ti,tmp275"; |
| reg = <0x49>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c64"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &i2c12 { |
| status = "okay"; |
| }; |
| |
| &i2c13 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| &i2c14 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| &i2c15 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| &vuart1 { |
| status = "okay"; |
| }; |
| |
| &vuart2 { |
| status = "okay"; |
| }; |
| |
| &lpc_ctrl { |
| status = "okay"; |
| memory-region = <&flash_memory>; |
| }; |
| |
| &mac2 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rmii3_default>; |
| clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, |
| <&syscon ASPEED_CLK_MAC3RCLK>; |
| clock-names = "MACCLK", "RCLK"; |
| use-ncsi; |
| }; |
| |
| &mac3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rmii4_default>; |
| clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, |
| <&syscon ASPEED_CLK_MAC4RCLK>; |
| clock-names = "MACCLK", "RCLK"; |
| use-ncsi; |
| }; |
| |
| &fmc { |
| status = "okay"; |
| flash@0 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "bmc"; |
| spi-max-frequency = <50000000>; |
| #include "openbmc-flash-layout-128.dtsi" |
| }; |
| }; |
| |
| &spi1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi1_default>; |
| |
| flash@0 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "pnor"; |
| spi-max-frequency = <100000000>; |
| }; |
| }; |
| |
| &xdma { |
| status = "okay"; |
| memory-region = <&vga_memory>; |
| }; |
