| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * BPF Jit compiler for s390. |
| * |
| * Minimum build requirements: |
| * |
| * - HAVE_MARCH_Z196_FEATURES: laal, laalg |
| * - HAVE_MARCH_Z10_FEATURES: msfi, cgrj, clgrj |
| * - HAVE_MARCH_Z9_109_FEATURES: alfi, llilf, clfi, oilf, nilf |
| * - 64BIT |
| * |
| * Copyright IBM Corp. 2012,2015 |
| * |
| * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Michael Holzheu <holzheu@linux.vnet.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "bpf_jit" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/netdevice.h> |
| #include <linux/filter.h> |
| #include <linux/init.h> |
| #include <linux/bpf.h> |
| #include <linux/mm.h> |
| #include <linux/kernel.h> |
| #include <asm/cacheflush.h> |
| #include <asm/extable.h> |
| #include <asm/dis.h> |
| #include <asm/facility.h> |
| #include <asm/nospec-branch.h> |
| #include <asm/set_memory.h> |
| #include <asm/text-patching.h> |
| #include "bpf_jit.h" |
| |
| struct bpf_jit { |
| u32 seen; /* Flags to remember seen eBPF instructions */ |
| u32 seen_reg[16]; /* Array to remember which registers are used */ |
| u32 *addrs; /* Array with relative instruction addresses */ |
| u8 *prg_buf; /* Start of program */ |
| int size; /* Size of program and literal pool */ |
| int size_prg; /* Size of program */ |
| int prg; /* Current position in program */ |
| int lit32_start; /* Start of 32-bit literal pool */ |
| int lit32; /* Current position in 32-bit literal pool */ |
| int lit64_start; /* Start of 64-bit literal pool */ |
| int lit64; /* Current position in 64-bit literal pool */ |
| int base_ip; /* Base address for literal pool */ |
| int exit_ip; /* Address of exit */ |
| int r1_thunk_ip; /* Address of expoline thunk for 'br %r1' */ |
| int r14_thunk_ip; /* Address of expoline thunk for 'br %r14' */ |
| int tail_call_start; /* Tail call start offset */ |
| int excnt; /* Number of exception table entries */ |
| int prologue_plt_ret; /* Return address for prologue hotpatch PLT */ |
| int prologue_plt; /* Start of prologue hotpatch PLT */ |
| }; |
| |
| #define SEEN_MEM BIT(0) /* use mem[] for temporary storage */ |
| #define SEEN_LITERAL BIT(1) /* code uses literals */ |
| #define SEEN_FUNC BIT(2) /* calls C functions */ |
| #define SEEN_STACK (SEEN_FUNC | SEEN_MEM) |
| |
| /* |
| * s390 registers |
| */ |
| #define REG_W0 (MAX_BPF_JIT_REG + 0) /* Work register 1 (even) */ |
| #define REG_W1 (MAX_BPF_JIT_REG + 1) /* Work register 2 (odd) */ |
| #define REG_L (MAX_BPF_JIT_REG + 2) /* Literal pool register */ |
| #define REG_15 (MAX_BPF_JIT_REG + 3) /* Register 15 */ |
| #define REG_0 REG_W0 /* Register 0 */ |
| #define REG_1 REG_W1 /* Register 1 */ |
| #define REG_2 BPF_REG_1 /* Register 2 */ |
| #define REG_3 BPF_REG_2 /* Register 3 */ |
| #define REG_4 BPF_REG_3 /* Register 4 */ |
| #define REG_7 BPF_REG_6 /* Register 7 */ |
| #define REG_8 BPF_REG_7 /* Register 8 */ |
| #define REG_14 BPF_REG_0 /* Register 14 */ |
| |
| /* |
| * Mapping of BPF registers to s390 registers |
| */ |
| static const int reg2hex[] = { |
| /* Return code */ |
| [BPF_REG_0] = 14, |
| /* Function parameters */ |
| [BPF_REG_1] = 2, |
| [BPF_REG_2] = 3, |
| [BPF_REG_3] = 4, |
| [BPF_REG_4] = 5, |
| [BPF_REG_5] = 6, |
| /* Call saved registers */ |
| [BPF_REG_6] = 7, |
| [BPF_REG_7] = 8, |
| [BPF_REG_8] = 9, |
| [BPF_REG_9] = 10, |
| /* BPF stack pointer */ |
| [BPF_REG_FP] = 13, |
| /* Register for blinding */ |
| [BPF_REG_AX] = 12, |
| /* Work registers for s390x backend */ |
| [REG_W0] = 0, |
| [REG_W1] = 1, |
| [REG_L] = 11, |
| [REG_15] = 15, |
| }; |
| |
| static inline u32 reg(u32 dst_reg, u32 src_reg) |
| { |
| return reg2hex[dst_reg] << 4 | reg2hex[src_reg]; |
| } |
| |
| static inline u32 reg_high(u32 reg) |
| { |
| return reg2hex[reg] << 4; |
| } |
| |
| static inline void reg_set_seen(struct bpf_jit *jit, u32 b1) |
| { |
| u32 r1 = reg2hex[b1]; |
| |
| if (r1 >= 6 && r1 <= 15 && !jit->seen_reg[r1]) |
| jit->seen_reg[r1] = 1; |
| } |
| |
| #define REG_SET_SEEN(b1) \ |
| ({ \ |
| reg_set_seen(jit, b1); \ |
| }) |
| |
| #define REG_SEEN(b1) jit->seen_reg[reg2hex[(b1)]] |
| |
| /* |
| * EMIT macros for code generation |
| */ |
| |
| #define _EMIT2(op) \ |
| ({ \ |
| if (jit->prg_buf) \ |
| *(u16 *) (jit->prg_buf + jit->prg) = (op); \ |
| jit->prg += 2; \ |
| }) |
| |
| #define EMIT2(op, b1, b2) \ |
| ({ \ |
| _EMIT2((op) | reg(b1, b2)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define _EMIT4(op) \ |
| ({ \ |
| if (jit->prg_buf) \ |
| *(u32 *) (jit->prg_buf + jit->prg) = (op); \ |
| jit->prg += 4; \ |
| }) |
| |
| #define EMIT4(op, b1, b2) \ |
| ({ \ |
| _EMIT4((op) | reg(b1, b2)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT4_RRF(op, b1, b2, b3) \ |
| ({ \ |
| _EMIT4((op) | reg_high(b3) << 8 | reg(b1, b2)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| REG_SET_SEEN(b3); \ |
| }) |
| |
| #define _EMIT4_DISP(op, disp) \ |
| ({ \ |
| unsigned int __disp = (disp) & 0xfff; \ |
| _EMIT4((op) | __disp); \ |
| }) |
| |
| #define EMIT4_DISP(op, b1, b2, disp) \ |
| ({ \ |
| _EMIT4_DISP((op) | reg_high(b1) << 16 | \ |
| reg_high(b2) << 8, (disp)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT4_IMM(op, b1, imm) \ |
| ({ \ |
| unsigned int __imm = (imm) & 0xffff; \ |
| _EMIT4((op) | reg_high(b1) << 16 | __imm); \ |
| REG_SET_SEEN(b1); \ |
| }) |
| |
| #define EMIT4_PCREL(op, pcrel) \ |
| ({ \ |
| long __pcrel = ((pcrel) >> 1) & 0xffff; \ |
| _EMIT4((op) | __pcrel); \ |
| }) |
| |
| #define EMIT4_PCREL_RIC(op, mask, target) \ |
| ({ \ |
| int __rel = ((target) - jit->prg) / 2; \ |
| _EMIT4((op) | (mask) << 20 | (__rel & 0xffff)); \ |
| }) |
| |
| #define _EMIT6(op1, op2) \ |
| ({ \ |
| if (jit->prg_buf) { \ |
| *(u32 *) (jit->prg_buf + jit->prg) = (op1); \ |
| *(u16 *) (jit->prg_buf + jit->prg + 4) = (op2); \ |
| } \ |
| jit->prg += 6; \ |
| }) |
| |
| #define _EMIT6_DISP(op1, op2, disp) \ |
| ({ \ |
| unsigned int __disp = (disp) & 0xfff; \ |
| _EMIT6((op1) | __disp, op2); \ |
| }) |
| |
| #define _EMIT6_DISP_LH(op1, op2, disp) \ |
| ({ \ |
| u32 _disp = (u32) (disp); \ |
| unsigned int __disp_h = _disp & 0xff000; \ |
| unsigned int __disp_l = _disp & 0x00fff; \ |
| _EMIT6((op1) | __disp_l, (op2) | __disp_h >> 4); \ |
| }) |
| |
| #define EMIT6_DISP_LH(op1, op2, b1, b2, b3, disp) \ |
| ({ \ |
| _EMIT6_DISP_LH((op1) | reg(b1, b2) << 16 | \ |
| reg_high(b3) << 8, op2, disp); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| REG_SET_SEEN(b3); \ |
| }) |
| |
| #define EMIT6_PCREL_RIEB(op1, op2, b1, b2, mask, target) \ |
| ({ \ |
| unsigned int rel = (int)((target) - jit->prg) / 2; \ |
| _EMIT6((op1) | reg(b1, b2) << 16 | (rel & 0xffff), \ |
| (op2) | (mask) << 12); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT6_PCREL_RIEC(op1, op2, b1, imm, mask, target) \ |
| ({ \ |
| unsigned int rel = (int)((target) - jit->prg) / 2; \ |
| _EMIT6((op1) | (reg_high(b1) | (mask)) << 16 | \ |
| (rel & 0xffff), (op2) | ((imm) & 0xff) << 8); \ |
| REG_SET_SEEN(b1); \ |
| BUILD_BUG_ON(((unsigned long) (imm)) > 0xff); \ |
| }) |
| |
| #define EMIT6_PCREL(op1, op2, b1, b2, i, off, mask) \ |
| ({ \ |
| int rel = (addrs[(i) + (off) + 1] - jit->prg) / 2; \ |
| _EMIT6((op1) | reg(b1, b2) << 16 | (rel & 0xffff), (op2) | (mask));\ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT6_PCREL_RILB(op, b, target) \ |
| ({ \ |
| unsigned int rel = (int)((target) - jit->prg) / 2; \ |
| _EMIT6((op) | reg_high(b) << 16 | rel >> 16, rel & 0xffff);\ |
| REG_SET_SEEN(b); \ |
| }) |
| |
| #define EMIT6_PCREL_RIL(op, target) \ |
| ({ \ |
| unsigned int rel = (int)((target) - jit->prg) / 2; \ |
| _EMIT6((op) | rel >> 16, rel & 0xffff); \ |
| }) |
| |
| #define EMIT6_PCREL_RILC(op, mask, target) \ |
| ({ \ |
| EMIT6_PCREL_RIL((op) | (mask) << 20, (target)); \ |
| }) |
| |
| #define _EMIT6_IMM(op, imm) \ |
| ({ \ |
| unsigned int __imm = (imm); \ |
| _EMIT6((op) | (__imm >> 16), __imm & 0xffff); \ |
| }) |
| |
| #define EMIT6_IMM(op, b1, imm) \ |
| ({ \ |
| _EMIT6_IMM((op) | reg_high(b1) << 16, imm); \ |
| REG_SET_SEEN(b1); \ |
| }) |
| |
| #define _EMIT_CONST_U32(val) \ |
| ({ \ |
| unsigned int ret; \ |
| ret = jit->lit32; \ |
| if (jit->prg_buf) \ |
| *(u32 *)(jit->prg_buf + jit->lit32) = (u32)(val);\ |
| jit->lit32 += 4; \ |
| ret; \ |
| }) |
| |
| #define EMIT_CONST_U32(val) \ |
| ({ \ |
| jit->seen |= SEEN_LITERAL; \ |
| _EMIT_CONST_U32(val) - jit->base_ip; \ |
| }) |
| |
| #define _EMIT_CONST_U64(val) \ |
| ({ \ |
| unsigned int ret; \ |
| ret = jit->lit64; \ |
| if (jit->prg_buf) \ |
| *(u64 *)(jit->prg_buf + jit->lit64) = (u64)(val);\ |
| jit->lit64 += 8; \ |
| ret; \ |
| }) |
| |
| #define EMIT_CONST_U64(val) \ |
| ({ \ |
| jit->seen |= SEEN_LITERAL; \ |
| _EMIT_CONST_U64(val) - jit->base_ip; \ |
| }) |
| |
| #define EMIT_ZERO(b1) \ |
| ({ \ |
| if (!fp->aux->verifier_zext) { \ |
| /* llgfr %dst,%dst (zero extend to 64 bit) */ \ |
| EMIT4(0xb9160000, b1, b1); \ |
| REG_SET_SEEN(b1); \ |
| } \ |
| }) |
| |
| /* |
| * Return whether this is the first pass. The first pass is special, since we |
| * don't know any sizes yet, and thus must be conservative. |
| */ |
| static bool is_first_pass(struct bpf_jit *jit) |
| { |
| return jit->size == 0; |
| } |
| |
| /* |
| * Return whether this is the code generation pass. The code generation pass is |
| * special, since we should change as little as possible. |
| */ |
| static bool is_codegen_pass(struct bpf_jit *jit) |
| { |
| return jit->prg_buf; |
| } |
| |
| /* |
| * Return whether "rel" can be encoded as a short PC-relative offset |
| */ |
| static bool is_valid_rel(int rel) |
| { |
| return rel >= -65536 && rel <= 65534; |
| } |
| |
| /* |
| * Return whether "off" can be reached using a short PC-relative offset |
| */ |
| static bool can_use_rel(struct bpf_jit *jit, int off) |
| { |
| return is_valid_rel(off - jit->prg); |
| } |
| |
| /* |
| * Return whether given displacement can be encoded using |
| * Long-Displacement Facility |
| */ |
| static bool is_valid_ldisp(int disp) |
| { |
| return disp >= -524288 && disp <= 524287; |
| } |
| |
| /* |
| * Return whether the next 32-bit literal pool entry can be referenced using |
| * Long-Displacement Facility |
| */ |
| static bool can_use_ldisp_for_lit32(struct bpf_jit *jit) |
| { |
| return is_valid_ldisp(jit->lit32 - jit->base_ip); |
| } |
| |
| /* |
| * Return whether the next 64-bit literal pool entry can be referenced using |
| * Long-Displacement Facility |
| */ |
| static bool can_use_ldisp_for_lit64(struct bpf_jit *jit) |
| { |
| return is_valid_ldisp(jit->lit64 - jit->base_ip); |
| } |
| |
| /* |
| * Fill whole space with illegal instructions |
| */ |
| static void jit_fill_hole(void *area, unsigned int size) |
| { |
| memset(area, 0, size); |
| } |
| |
| /* |
| * Save registers from "rs" (register start) to "re" (register end) on stack |
| */ |
| static void save_regs(struct bpf_jit *jit, u32 rs, u32 re) |
| { |
| u32 off = STK_OFF_R6 + (rs - 6) * 8; |
| |
| if (rs == re) |
| /* stg %rs,off(%r15) */ |
| _EMIT6(0xe300f000 | rs << 20 | off, 0x0024); |
| else |
| /* stmg %rs,%re,off(%r15) */ |
| _EMIT6_DISP(0xeb00f000 | rs << 20 | re << 16, 0x0024, off); |
| } |
| |
| /* |
| * Restore registers from "rs" (register start) to "re" (register end) on stack |
| */ |
| static void restore_regs(struct bpf_jit *jit, u32 rs, u32 re, u32 stack_depth) |
| { |
| u32 off = STK_OFF_R6 + (rs - 6) * 8; |
| |
| if (jit->seen & SEEN_STACK) |
| off += STK_OFF + stack_depth; |
| |
| if (rs == re) |
| /* lg %rs,off(%r15) */ |
| _EMIT6(0xe300f000 | rs << 20 | off, 0x0004); |
| else |
| /* lmg %rs,%re,off(%r15) */ |
| _EMIT6_DISP(0xeb00f000 | rs << 20 | re << 16, 0x0004, off); |
| } |
| |
| /* |
| * Return first seen register (from start) |
| */ |
| static int get_start(struct bpf_jit *jit, int start) |
| { |
| int i; |
| |
| for (i = start; i <= 15; i++) { |
| if (jit->seen_reg[i]) |
| return i; |
| } |
| return 0; |
| } |
| |
| /* |
| * Return last seen register (from start) (gap >= 2) |
| */ |
| static int get_end(struct bpf_jit *jit, int start) |
| { |
| int i; |
| |
| for (i = start; i < 15; i++) { |
| if (!jit->seen_reg[i] && !jit->seen_reg[i + 1]) |
| return i - 1; |
| } |
| return jit->seen_reg[15] ? 15 : 14; |
| } |
| |
| #define REGS_SAVE 1 |
| #define REGS_RESTORE 0 |
| /* |
| * Save and restore clobbered registers (6-15) on stack. |
| * We save/restore registers in chunks with gap >= 2 registers. |
| */ |
| static void save_restore_regs(struct bpf_jit *jit, int op, u32 stack_depth) |
| { |
| const int last = 15, save_restore_size = 6; |
| int re = 6, rs; |
| |
| if (is_first_pass(jit)) { |
| /* |
| * We don't know yet which registers are used. Reserve space |
| * conservatively. |
| */ |
| jit->prg += (last - re + 1) * save_restore_size; |
| return; |
| } |
| |
| do { |
| rs = get_start(jit, re); |
| if (!rs) |
| break; |
| re = get_end(jit, rs + 1); |
| if (op == REGS_SAVE) |
| save_regs(jit, rs, re); |
| else |
| restore_regs(jit, rs, re, stack_depth); |
| re++; |
| } while (re <= last); |
| } |
| |
| static void bpf_skip(struct bpf_jit *jit, int size) |
| { |
| if (size >= 6 && !is_valid_rel(size)) { |
| /* brcl 0xf,size */ |
| EMIT6_PCREL_RIL(0xc0f4000000, size); |
| size -= 6; |
| } else if (size >= 4 && is_valid_rel(size)) { |
| /* brc 0xf,size */ |
| EMIT4_PCREL(0xa7f40000, size); |
| size -= 4; |
| } |
| while (size >= 2) { |
| /* bcr 0,%0 */ |
| _EMIT2(0x0700); |
| size -= 2; |
| } |
| } |
| |
| /* |
| * PLT for hotpatchable calls. The calling convention is the same as for the |
| * ftrace hotpatch trampolines: %r0 is return address, %r1 is clobbered. |
| */ |
| struct bpf_plt { |
| char code[16]; |
| void *ret; |
| void *target; |
| } __packed; |
| extern const struct bpf_plt bpf_plt; |
| asm( |
| ".pushsection .rodata\n" |
| " .balign 8\n" |
| "bpf_plt:\n" |
| " lgrl %r0,bpf_plt_ret\n" |
| " lgrl %r1,bpf_plt_target\n" |
| " br %r1\n" |
| " .balign 8\n" |
| "bpf_plt_ret: .quad 0\n" |
| "bpf_plt_target: .quad 0\n" |
| " .popsection\n" |
| ); |
| |
| static void bpf_jit_plt(struct bpf_plt *plt, void *ret, void *target) |
| { |
| memcpy(plt, &bpf_plt, sizeof(*plt)); |
| plt->ret = ret; |
| plt->target = target; |
| } |
| |
| /* |
| * Emit function prologue |
| * |
| * Save registers and create stack frame if necessary. |
| * See stack frame layout description in "bpf_jit.h"! |
| */ |
| static void bpf_jit_prologue(struct bpf_jit *jit, struct bpf_prog *fp, |
| u32 stack_depth) |
| { |
| /* No-op for hotpatching */ |
| /* brcl 0,prologue_plt */ |
| EMIT6_PCREL_RILC(0xc0040000, 0, jit->prologue_plt); |
| jit->prologue_plt_ret = jit->prg; |
| |
| if (!bpf_is_subprog(fp)) { |
| /* Initialize the tail call counter in the main program. */ |
| /* xc STK_OFF_TCCNT(4,%r15),STK_OFF_TCCNT(%r15) */ |
| _EMIT6(0xd703f000 | STK_OFF_TCCNT, 0xf000 | STK_OFF_TCCNT); |
| } else { |
| /* |
| * Skip the tail call counter initialization in subprograms. |
| * Insert nops in order to have tail_call_start at a |
| * predictable offset. |
| */ |
| bpf_skip(jit, 6); |
| } |
| /* Tail calls have to skip above initialization */ |
| jit->tail_call_start = jit->prg; |
| /* Save registers */ |
| save_restore_regs(jit, REGS_SAVE, stack_depth); |
| /* Setup literal pool */ |
| if (is_first_pass(jit) || (jit->seen & SEEN_LITERAL)) { |
| if (!is_first_pass(jit) && |
| is_valid_ldisp(jit->size - (jit->prg + 2))) { |
| /* basr %l,0 */ |
| EMIT2(0x0d00, REG_L, REG_0); |
| jit->base_ip = jit->prg; |
| } else { |
| /* larl %l,lit32_start */ |
| EMIT6_PCREL_RILB(0xc0000000, REG_L, jit->lit32_start); |
| jit->base_ip = jit->lit32_start; |
| } |
| } |
| /* Setup stack and backchain */ |
| if (is_first_pass(jit) || (jit->seen & SEEN_STACK)) { |
| if (is_first_pass(jit) || (jit->seen & SEEN_FUNC)) |
| /* lgr %w1,%r15 (backchain) */ |
| EMIT4(0xb9040000, REG_W1, REG_15); |
| /* la %bfp,STK_160_UNUSED(%r15) (BPF frame pointer) */ |
| EMIT4_DISP(0x41000000, BPF_REG_FP, REG_15, STK_160_UNUSED); |
| /* aghi %r15,-STK_OFF */ |
| EMIT4_IMM(0xa70b0000, REG_15, -(STK_OFF + stack_depth)); |
| if (is_first_pass(jit) || (jit->seen & SEEN_FUNC)) |
| /* stg %w1,152(%r15) (backchain) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, |
| REG_15, 152); |
| } |
| } |
| |
| /* |
| * Emit an expoline for a jump that follows |
| */ |
| static void emit_expoline(struct bpf_jit *jit) |
| { |
| /* exrl %r0,.+10 */ |
| EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10); |
| /* j . */ |
| EMIT4_PCREL(0xa7f40000, 0); |
| } |
| |
| /* |
| * Emit __s390_indirect_jump_r1 thunk if necessary |
| */ |
| static void emit_r1_thunk(struct bpf_jit *jit) |
| { |
| if (nospec_uses_trampoline()) { |
| jit->r1_thunk_ip = jit->prg; |
| emit_expoline(jit); |
| /* br %r1 */ |
| _EMIT2(0x07f1); |
| } |
| } |
| |
| /* |
| * Call r1 either directly or via __s390_indirect_jump_r1 thunk |
| */ |
| static void call_r1(struct bpf_jit *jit) |
| { |
| if (nospec_uses_trampoline()) |
| /* brasl %r14,__s390_indirect_jump_r1 */ |
| EMIT6_PCREL_RILB(0xc0050000, REG_14, jit->r1_thunk_ip); |
| else |
| /* basr %r14,%r1 */ |
| EMIT2(0x0d00, REG_14, REG_1); |
| } |
| |
| /* |
| * Function epilogue |
| */ |
| static void bpf_jit_epilogue(struct bpf_jit *jit, u32 stack_depth) |
| { |
| jit->exit_ip = jit->prg; |
| /* Load exit code: lgr %r2,%b0 */ |
| EMIT4(0xb9040000, REG_2, BPF_REG_0); |
| /* Restore registers */ |
| save_restore_regs(jit, REGS_RESTORE, stack_depth); |
| if (nospec_uses_trampoline()) { |
| jit->r14_thunk_ip = jit->prg; |
| /* Generate __s390_indirect_jump_r14 thunk */ |
| emit_expoline(jit); |
| } |
| /* br %r14 */ |
| _EMIT2(0x07fe); |
| |
| if (is_first_pass(jit) || (jit->seen & SEEN_FUNC)) |
| emit_r1_thunk(jit); |
| |
| jit->prg = ALIGN(jit->prg, 8); |
| jit->prologue_plt = jit->prg; |
| if (jit->prg_buf) |
| bpf_jit_plt((struct bpf_plt *)(jit->prg_buf + jit->prg), |
| jit->prg_buf + jit->prologue_plt_ret, NULL); |
| jit->prg += sizeof(struct bpf_plt); |
| } |
| |
| static int get_probe_mem_regno(const u8 *insn) |
| { |
| /* |
| * insn must point to llgc, llgh, llgf, lg, lgb, lgh or lgf, which have |
| * destination register at the same position. |
| */ |
| if (insn[0] != 0xe3) /* common prefix */ |
| return -1; |
| if (insn[5] != 0x90 && /* llgc */ |
| insn[5] != 0x91 && /* llgh */ |
| insn[5] != 0x16 && /* llgf */ |
| insn[5] != 0x04 && /* lg */ |
| insn[5] != 0x77 && /* lgb */ |
| insn[5] != 0x15 && /* lgh */ |
| insn[5] != 0x14) /* lgf */ |
| return -1; |
| return insn[1] >> 4; |
| } |
| |
| bool ex_handler_bpf(const struct exception_table_entry *x, struct pt_regs *regs) |
| { |
| regs->psw.addr = extable_fixup(x); |
| regs->gprs[x->data] = 0; |
| return true; |
| } |
| |
| static int bpf_jit_probe_mem(struct bpf_jit *jit, struct bpf_prog *fp, |
| int probe_prg, int nop_prg) |
| { |
| struct exception_table_entry *ex; |
| int reg, prg; |
| s64 delta; |
| u8 *insn; |
| int i; |
| |
| if (!fp->aux->extable) |
| /* Do nothing during early JIT passes. */ |
| return 0; |
| insn = jit->prg_buf + probe_prg; |
| reg = get_probe_mem_regno(insn); |
| if (WARN_ON_ONCE(reg < 0)) |
| /* JIT bug - unexpected probe instruction. */ |
| return -1; |
| if (WARN_ON_ONCE(probe_prg + insn_length(*insn) != nop_prg)) |
| /* JIT bug - gap between probe and nop instructions. */ |
| return -1; |
| for (i = 0; i < 2; i++) { |
| if (WARN_ON_ONCE(jit->excnt >= fp->aux->num_exentries)) |
| /* Verifier bug - not enough entries. */ |
| return -1; |
| ex = &fp->aux->extable[jit->excnt]; |
| /* Add extable entries for probe and nop instructions. */ |
| prg = i == 0 ? probe_prg : nop_prg; |
| delta = jit->prg_buf + prg - (u8 *)&ex->insn; |
| if (WARN_ON_ONCE(delta < INT_MIN || delta > INT_MAX)) |
| /* JIT bug - code and extable must be close. */ |
| return -1; |
| ex->insn = delta; |
| /* |
| * Always land on the nop. Note that extable infrastructure |
| * ignores fixup field, it is handled by ex_handler_bpf(). |
| */ |
| delta = jit->prg_buf + nop_prg - (u8 *)&ex->fixup; |
| if (WARN_ON_ONCE(delta < INT_MIN || delta > INT_MAX)) |
| /* JIT bug - landing pad and extable must be close. */ |
| return -1; |
| ex->fixup = delta; |
| ex->type = EX_TYPE_BPF; |
| ex->data = reg; |
| jit->excnt++; |
| } |
| return 0; |
| } |
| |
| /* |
| * Sign-extend the register if necessary |
| */ |
| static int sign_extend(struct bpf_jit *jit, int r, u8 size, u8 flags) |
| { |
| if (!(flags & BTF_FMODEL_SIGNED_ARG)) |
| return 0; |
| |
| switch (size) { |
| case 1: |
| /* lgbr %r,%r */ |
| EMIT4(0xb9060000, r, r); |
| return 0; |
| case 2: |
| /* lghr %r,%r */ |
| EMIT4(0xb9070000, r, r); |
| return 0; |
| case 4: |
| /* lgfr %r,%r */ |
| EMIT4(0xb9140000, r, r); |
| return 0; |
| case 8: |
| return 0; |
| default: |
| return -1; |
| } |
| } |
| |
| /* |
| * Compile one eBPF instruction into s390x code |
| * |
| * NOTE: Use noinline because for gcov (-fprofile-arcs) gcc allocates a lot of |
| * stack space for the large switch statement. |
| */ |
| static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, |
| int i, bool extra_pass, u32 stack_depth) |
| { |
| struct bpf_insn *insn = &fp->insnsi[i]; |
| s32 branch_oc_off = insn->off; |
| u32 dst_reg = insn->dst_reg; |
| u32 src_reg = insn->src_reg; |
| int last, insn_count = 1; |
| u32 *addrs = jit->addrs; |
| s32 imm = insn->imm; |
| s16 off = insn->off; |
| int probe_prg = -1; |
| unsigned int mask; |
| int nop_prg; |
| int err; |
| |
| if (BPF_CLASS(insn->code) == BPF_LDX && |
| (BPF_MODE(insn->code) == BPF_PROBE_MEM || |
| BPF_MODE(insn->code) == BPF_PROBE_MEMSX)) |
| probe_prg = jit->prg; |
| |
| switch (insn->code) { |
| /* |
| * BPF_MOV |
| */ |
| case BPF_ALU | BPF_MOV | BPF_X: |
| switch (insn->off) { |
| case 0: /* DST = (u32) SRC */ |
| /* llgfr %dst,%src */ |
| EMIT4(0xb9160000, dst_reg, src_reg); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case 8: /* DST = (u32)(s8) SRC */ |
| /* lbr %dst,%src */ |
| EMIT4(0xb9260000, dst_reg, src_reg); |
| /* llgfr %dst,%dst */ |
| EMIT4(0xb9160000, dst_reg, dst_reg); |
| break; |
| case 16: /* DST = (u32)(s16) SRC */ |
| /* lhr %dst,%src */ |
| EMIT4(0xb9270000, dst_reg, src_reg); |
| /* llgfr %dst,%dst */ |
| EMIT4(0xb9160000, dst_reg, dst_reg); |
| break; |
| } |
| break; |
| case BPF_ALU64 | BPF_MOV | BPF_X: |
| switch (insn->off) { |
| case 0: /* DST = SRC */ |
| /* lgr %dst,%src */ |
| EMIT4(0xb9040000, dst_reg, src_reg); |
| break; |
| case 8: /* DST = (s8) SRC */ |
| /* lgbr %dst,%src */ |
| EMIT4(0xb9060000, dst_reg, src_reg); |
| break; |
| case 16: /* DST = (s16) SRC */ |
| /* lghr %dst,%src */ |
| EMIT4(0xb9070000, dst_reg, src_reg); |
| break; |
| case 32: /* DST = (s32) SRC */ |
| /* lgfr %dst,%src */ |
| EMIT4(0xb9140000, dst_reg, src_reg); |
| break; |
| } |
| break; |
| case BPF_ALU | BPF_MOV | BPF_K: /* dst = (u32) imm */ |
| /* llilf %dst,imm */ |
| EMIT6_IMM(0xc00f0000, dst_reg, imm); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case BPF_ALU64 | BPF_MOV | BPF_K: /* dst = imm */ |
| /* lgfi %dst,imm */ |
| EMIT6_IMM(0xc0010000, dst_reg, imm); |
| break; |
| /* |
| * BPF_LD 64 |
| */ |
| case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */ |
| { |
| /* 16 byte instruction that uses two 'struct bpf_insn' */ |
| u64 imm64; |
| |
| imm64 = (u64)(u32) insn[0].imm | ((u64)(u32) insn[1].imm) << 32; |
| /* lgrl %dst,imm */ |
| EMIT6_PCREL_RILB(0xc4080000, dst_reg, _EMIT_CONST_U64(imm64)); |
| insn_count = 2; |
| break; |
| } |
| /* |
| * BPF_ADD |
| */ |
| case BPF_ALU | BPF_ADD | BPF_X: /* dst = (u32) dst + (u32) src */ |
| /* ar %dst,%src */ |
| EMIT2(0x1a00, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_ADD | BPF_X: /* dst = dst + src */ |
| /* agr %dst,%src */ |
| EMIT4(0xb9080000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_ADD | BPF_K: /* dst = (u32) dst + (u32) imm */ |
| if (imm != 0) { |
| /* alfi %dst,imm */ |
| EMIT6_IMM(0xc20b0000, dst_reg, imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_ADD | BPF_K: /* dst = dst + imm */ |
| if (!imm) |
| break; |
| /* agfi %dst,imm */ |
| EMIT6_IMM(0xc2080000, dst_reg, imm); |
| break; |
| /* |
| * BPF_SUB |
| */ |
| case BPF_ALU | BPF_SUB | BPF_X: /* dst = (u32) dst - (u32) src */ |
| /* sr %dst,%src */ |
| EMIT2(0x1b00, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_SUB | BPF_X: /* dst = dst - src */ |
| /* sgr %dst,%src */ |
| EMIT4(0xb9090000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_SUB | BPF_K: /* dst = (u32) dst - (u32) imm */ |
| if (imm != 0) { |
| /* alfi %dst,-imm */ |
| EMIT6_IMM(0xc20b0000, dst_reg, -imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ |
| if (!imm) |
| break; |
| if (imm == -0x80000000) { |
| /* algfi %dst,0x80000000 */ |
| EMIT6_IMM(0xc20a0000, dst_reg, 0x80000000); |
| } else { |
| /* agfi %dst,-imm */ |
| EMIT6_IMM(0xc2080000, dst_reg, -imm); |
| } |
| break; |
| /* |
| * BPF_MUL |
| */ |
| case BPF_ALU | BPF_MUL | BPF_X: /* dst = (u32) dst * (u32) src */ |
| /* msr %dst,%src */ |
| EMIT4(0xb2520000, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_MUL | BPF_X: /* dst = dst * src */ |
| /* msgr %dst,%src */ |
| EMIT4(0xb90c0000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_MUL | BPF_K: /* dst = (u32) dst * (u32) imm */ |
| if (imm != 1) { |
| /* msfi %r5,imm */ |
| EMIT6_IMM(0xc2010000, dst_reg, imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_MUL | BPF_K: /* dst = dst * imm */ |
| if (imm == 1) |
| break; |
| /* msgfi %dst,imm */ |
| EMIT6_IMM(0xc2000000, dst_reg, imm); |
| break; |
| /* |
| * BPF_DIV / BPF_MOD |
| */ |
| case BPF_ALU | BPF_DIV | BPF_X: |
| case BPF_ALU | BPF_MOD | BPF_X: |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| switch (off) { |
| case 0: /* dst = (u32) dst {/,%} (u32) src */ |
| /* xr %w0,%w0 */ |
| EMIT2(0x1700, REG_W0, REG_W0); |
| /* lr %w1,%dst */ |
| EMIT2(0x1800, REG_W1, dst_reg); |
| /* dlr %w0,%src */ |
| EMIT4(0xb9970000, REG_W0, src_reg); |
| break; |
| case 1: /* dst = (u32) ((s32) dst {/,%} (s32) src) */ |
| /* lgfr %r1,%dst */ |
| EMIT4(0xb9140000, REG_W1, dst_reg); |
| /* dsgfr %r0,%src */ |
| EMIT4(0xb91d0000, REG_W0, src_reg); |
| break; |
| } |
| /* llgfr %dst,%rc */ |
| EMIT4(0xb9160000, dst_reg, rc_reg); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| } |
| case BPF_ALU64 | BPF_DIV | BPF_X: |
| case BPF_ALU64 | BPF_MOD | BPF_X: |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| switch (off) { |
| case 0: /* dst = dst {/,%} src */ |
| /* lghi %w0,0 */ |
| EMIT4_IMM(0xa7090000, REG_W0, 0); |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* dlgr %w0,%src */ |
| EMIT4(0xb9870000, REG_W0, src_reg); |
| break; |
| case 1: /* dst = (s64) dst {/,%} (s64) src */ |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* dsgr %w0,%src */ |
| EMIT4(0xb90d0000, REG_W0, src_reg); |
| break; |
| } |
| /* lgr %dst,%rc */ |
| EMIT4(0xb9040000, dst_reg, rc_reg); |
| break; |
| } |
| case BPF_ALU | BPF_DIV | BPF_K: |
| case BPF_ALU | BPF_MOD | BPF_K: |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| if (imm == 1) { |
| if (BPF_OP(insn->code) == BPF_MOD) |
| /* lghi %dst,0 */ |
| EMIT4_IMM(0xa7090000, dst_reg, 0); |
| else |
| EMIT_ZERO(dst_reg); |
| break; |
| } |
| if (!is_first_pass(jit) && can_use_ldisp_for_lit32(jit)) { |
| switch (off) { |
| case 0: /* dst = (u32) dst {/,%} (u32) imm */ |
| /* xr %w0,%w0 */ |
| EMIT2(0x1700, REG_W0, REG_W0); |
| /* lr %w1,%dst */ |
| EMIT2(0x1800, REG_W1, dst_reg); |
| /* dl %w0,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0097, REG_W0, REG_0, |
| REG_L, EMIT_CONST_U32(imm)); |
| break; |
| case 1: /* dst = (s32) dst {/,%} (s32) imm */ |
| /* lgfr %r1,%dst */ |
| EMIT4(0xb9140000, REG_W1, dst_reg); |
| /* dsgf %r0,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x001d, REG_W0, REG_0, |
| REG_L, EMIT_CONST_U32(imm)); |
| break; |
| } |
| } else { |
| switch (off) { |
| case 0: /* dst = (u32) dst {/,%} (u32) imm */ |
| /* xr %w0,%w0 */ |
| EMIT2(0x1700, REG_W0, REG_W0); |
| /* lr %w1,%dst */ |
| EMIT2(0x1800, REG_W1, dst_reg); |
| /* lrl %dst,imm */ |
| EMIT6_PCREL_RILB(0xc40d0000, dst_reg, |
| _EMIT_CONST_U32(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* dlr %w0,%dst */ |
| EMIT4(0xb9970000, REG_W0, dst_reg); |
| break; |
| case 1: /* dst = (s32) dst {/,%} (s32) imm */ |
| /* lgfr %w1,%dst */ |
| EMIT4(0xb9140000, REG_W1, dst_reg); |
| /* lgfrl %dst,imm */ |
| EMIT6_PCREL_RILB(0xc40c0000, dst_reg, |
| _EMIT_CONST_U32(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* dsgr %w0,%dst */ |
| EMIT4(0xb90d0000, REG_W0, dst_reg); |
| break; |
| } |
| } |
| /* llgfr %dst,%rc */ |
| EMIT4(0xb9160000, dst_reg, rc_reg); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| } |
| case BPF_ALU64 | BPF_DIV | BPF_K: |
| case BPF_ALU64 | BPF_MOD | BPF_K: |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| if (imm == 1) { |
| if (BPF_OP(insn->code) == BPF_MOD) |
| /* lhgi %dst,0 */ |
| EMIT4_IMM(0xa7090000, dst_reg, 0); |
| break; |
| } |
| if (!is_first_pass(jit) && can_use_ldisp_for_lit64(jit)) { |
| switch (off) { |
| case 0: /* dst = dst {/,%} imm */ |
| /* lghi %w0,0 */ |
| EMIT4_IMM(0xa7090000, REG_W0, 0); |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* dlg %w0,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0087, REG_W0, REG_0, |
| REG_L, EMIT_CONST_U64(imm)); |
| break; |
| case 1: /* dst = (s64) dst {/,%} (s64) imm */ |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* dsg %w0,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x000d, REG_W0, REG_0, |
| REG_L, EMIT_CONST_U64(imm)); |
| break; |
| } |
| } else { |
| switch (off) { |
| case 0: /* dst = dst {/,%} imm */ |
| /* lghi %w0,0 */ |
| EMIT4_IMM(0xa7090000, REG_W0, 0); |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* lgrl %dst,imm */ |
| EMIT6_PCREL_RILB(0xc4080000, dst_reg, |
| _EMIT_CONST_U64(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* dlgr %w0,%dst */ |
| EMIT4(0xb9870000, REG_W0, dst_reg); |
| break; |
| case 1: /* dst = (s64) dst {/,%} (s64) imm */ |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* lgrl %dst,imm */ |
| EMIT6_PCREL_RILB(0xc4080000, dst_reg, |
| _EMIT_CONST_U64(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* dsgr %w0,%dst */ |
| EMIT4(0xb90d0000, REG_W0, dst_reg); |
| break; |
| } |
| } |
| /* lgr %dst,%rc */ |
| EMIT4(0xb9040000, dst_reg, rc_reg); |
| break; |
| } |
| /* |
| * BPF_AND |
| */ |
| case BPF_ALU | BPF_AND | BPF_X: /* dst = (u32) dst & (u32) src */ |
| /* nr %dst,%src */ |
| EMIT2(0x1400, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_AND | BPF_X: /* dst = dst & src */ |
| /* ngr %dst,%src */ |
| EMIT4(0xb9800000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_AND | BPF_K: /* dst = (u32) dst & (u32) imm */ |
| /* nilf %dst,imm */ |
| EMIT6_IMM(0xc00b0000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_AND | BPF_K: /* dst = dst & imm */ |
| if (!is_first_pass(jit) && can_use_ldisp_for_lit64(jit)) { |
| /* ng %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0080, |
| dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| } else { |
| /* lgrl %w0,imm */ |
| EMIT6_PCREL_RILB(0xc4080000, REG_W0, |
| _EMIT_CONST_U64(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* ngr %dst,%w0 */ |
| EMIT4(0xb9800000, dst_reg, REG_W0); |
| } |
| break; |
| /* |
| * BPF_OR |
| */ |
| case BPF_ALU | BPF_OR | BPF_X: /* dst = (u32) dst | (u32) src */ |
| /* or %dst,%src */ |
| EMIT2(0x1600, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_OR | BPF_X: /* dst = dst | src */ |
| /* ogr %dst,%src */ |
| EMIT4(0xb9810000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_OR | BPF_K: /* dst = (u32) dst | (u32) imm */ |
| /* oilf %dst,imm */ |
| EMIT6_IMM(0xc00d0000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_OR | BPF_K: /* dst = dst | imm */ |
| if (!is_first_pass(jit) && can_use_ldisp_for_lit64(jit)) { |
| /* og %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0081, |
| dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| } else { |
| /* lgrl %w0,imm */ |
| EMIT6_PCREL_RILB(0xc4080000, REG_W0, |
| _EMIT_CONST_U64(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* ogr %dst,%w0 */ |
| EMIT4(0xb9810000, dst_reg, REG_W0); |
| } |
| break; |
| /* |
| * BPF_XOR |
| */ |
| case BPF_ALU | BPF_XOR | BPF_X: /* dst = (u32) dst ^ (u32) src */ |
| /* xr %dst,%src */ |
| EMIT2(0x1700, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_XOR | BPF_X: /* dst = dst ^ src */ |
| /* xgr %dst,%src */ |
| EMIT4(0xb9820000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_XOR | BPF_K: /* dst = (u32) dst ^ (u32) imm */ |
| if (imm != 0) { |
| /* xilf %dst,imm */ |
| EMIT6_IMM(0xc0070000, dst_reg, imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_XOR | BPF_K: /* dst = dst ^ imm */ |
| if (!is_first_pass(jit) && can_use_ldisp_for_lit64(jit)) { |
| /* xg %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0082, |
| dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| } else { |
| /* lgrl %w0,imm */ |
| EMIT6_PCREL_RILB(0xc4080000, REG_W0, |
| _EMIT_CONST_U64(imm)); |
| jit->seen |= SEEN_LITERAL; |
| /* xgr %dst,%w0 */ |
| EMIT4(0xb9820000, dst_reg, REG_W0); |
| } |
| break; |
| /* |
| * BPF_LSH |
| */ |
| case BPF_ALU | BPF_LSH | BPF_X: /* dst = (u32) dst << (u32) src */ |
| /* sll %dst,0(%src) */ |
| EMIT4_DISP(0x89000000, dst_reg, src_reg, 0); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_LSH | BPF_X: /* dst = dst << src */ |
| /* sllg %dst,%dst,0(%src) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, src_reg, 0); |
| break; |
| case BPF_ALU | BPF_LSH | BPF_K: /* dst = (u32) dst << (u32) imm */ |
| if (imm != 0) { |
| /* sll %dst,imm(%r0) */ |
| EMIT4_DISP(0x89000000, dst_reg, REG_0, imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_LSH | BPF_K: /* dst = dst << imm */ |
| if (imm == 0) |
| break; |
| /* sllg %dst,%dst,imm(%r0) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, REG_0, imm); |
| break; |
| /* |
| * BPF_RSH |
| */ |
| case BPF_ALU | BPF_RSH | BPF_X: /* dst = (u32) dst >> (u32) src */ |
| /* srl %dst,0(%src) */ |
| EMIT4_DISP(0x88000000, dst_reg, src_reg, 0); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_RSH | BPF_X: /* dst = dst >> src */ |
| /* srlg %dst,%dst,0(%src) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, src_reg, 0); |
| break; |
| case BPF_ALU | BPF_RSH | BPF_K: /* dst = (u32) dst >> (u32) imm */ |
| if (imm != 0) { |
| /* srl %dst,imm(%r0) */ |
| EMIT4_DISP(0x88000000, dst_reg, REG_0, imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_RSH | BPF_K: /* dst = dst >> imm */ |
| if (imm == 0) |
| break; |
| /* srlg %dst,%dst,imm(%r0) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, REG_0, imm); |
| break; |
| /* |
| * BPF_ARSH |
| */ |
| case BPF_ALU | BPF_ARSH | BPF_X: /* ((s32) dst) >>= src */ |
| /* sra %dst,%dst,0(%src) */ |
| EMIT4_DISP(0x8a000000, dst_reg, src_reg, 0); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_ARSH | BPF_X: /* ((s64) dst) >>= src */ |
| /* srag %dst,%dst,0(%src) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000a, dst_reg, dst_reg, src_reg, 0); |
| break; |
| case BPF_ALU | BPF_ARSH | BPF_K: /* ((s32) dst >> imm */ |
| if (imm != 0) { |
| /* sra %dst,imm(%r0) */ |
| EMIT4_DISP(0x8a000000, dst_reg, REG_0, imm); |
| } |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_ARSH | BPF_K: /* ((s64) dst) >>= imm */ |
| if (imm == 0) |
| break; |
| /* srag %dst,%dst,imm(%r0) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000a, dst_reg, dst_reg, REG_0, imm); |
| break; |
| /* |
| * BPF_NEG |
| */ |
| case BPF_ALU | BPF_NEG: /* dst = (u32) -dst */ |
| /* lcr %dst,%dst */ |
| EMIT2(0x1300, dst_reg, dst_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_NEG: /* dst = -dst */ |
| /* lcgr %dst,%dst */ |
| EMIT4(0xb9030000, dst_reg, dst_reg); |
| break; |
| /* |
| * BPF_FROM_BE/LE |
| */ |
| case BPF_ALU | BPF_END | BPF_FROM_BE: |
| /* s390 is big endian, therefore only clear high order bytes */ |
| switch (imm) { |
| case 16: /* dst = (u16) cpu_to_be16(dst) */ |
| /* llghr %dst,%dst */ |
| EMIT4(0xb9850000, dst_reg, dst_reg); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case 32: /* dst = (u32) cpu_to_be32(dst) */ |
| if (!fp->aux->verifier_zext) |
| /* llgfr %dst,%dst */ |
| EMIT4(0xb9160000, dst_reg, dst_reg); |
| break; |
| case 64: /* dst = (u64) cpu_to_be64(dst) */ |
| break; |
| } |
| break; |
| case BPF_ALU | BPF_END | BPF_FROM_LE: |
| case BPF_ALU64 | BPF_END | BPF_FROM_LE: |
| switch (imm) { |
| case 16: /* dst = (u16) cpu_to_le16(dst) */ |
| /* lrvr %dst,%dst */ |
| EMIT4(0xb91f0000, dst_reg, dst_reg); |
| /* srl %dst,16(%r0) */ |
| EMIT4_DISP(0x88000000, dst_reg, REG_0, 16); |
| /* llghr %dst,%dst */ |
| EMIT4(0xb9850000, dst_reg, dst_reg); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case 32: /* dst = (u32) cpu_to_le32(dst) */ |
| /* lrvr %dst,%dst */ |
| EMIT4(0xb91f0000, dst_reg, dst_reg); |
| if (!fp->aux->verifier_zext) |
| /* llgfr %dst,%dst */ |
| EMIT4(0xb9160000, dst_reg, dst_reg); |
| break; |
| case 64: /* dst = (u64) cpu_to_le64(dst) */ |
| /* lrvgr %dst,%dst */ |
| EMIT4(0xb90f0000, dst_reg, dst_reg); |
| break; |
| } |
| break; |
| /* |
| * BPF_NOSPEC (speculation barrier) |
| */ |
| case BPF_ST | BPF_NOSPEC: |
| break; |
| /* |
| * BPF_ST(X) |
| */ |
| case BPF_STX | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = src_reg */ |
| /* stcy %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0072, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = src */ |
| /* sthy %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0070, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = src */ |
| /* sty %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0050, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_MEM | BPF_DW: /* (u64 *)(dst + off) = src */ |
| /* stg %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = imm */ |
| /* lhi %w0,imm */ |
| EMIT4_IMM(0xa7080000, REG_W0, (u8) imm); |
| /* stcy %w0,off(dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0072, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = imm */ |
| /* lhi %w0,imm */ |
| EMIT4_IMM(0xa7080000, REG_W0, (u16) imm); |
| /* sthy %w0,off(dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0070, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = imm */ |
| /* llilf %w0,imm */ |
| EMIT6_IMM(0xc00f0000, REG_W0, (u32) imm); |
| /* sty %w0,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0050, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_DW: /* *(u64 *)(dst + off) = imm */ |
| /* lgfi %w0,imm */ |
| EMIT6_IMM(0xc0010000, REG_W0, imm); |
| /* stg %w0,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| /* |
| * BPF_ATOMIC |
| */ |
| case BPF_STX | BPF_ATOMIC | BPF_DW: |
| case BPF_STX | BPF_ATOMIC | BPF_W: |
| { |
| bool is32 = BPF_SIZE(insn->code) == BPF_W; |
| |
| switch (insn->imm) { |
| /* {op32|op64} {%w0|%src},%src,off(%dst) */ |
| #define EMIT_ATOMIC(op32, op64) do { \ |
| EMIT6_DISP_LH(0xeb000000, is32 ? (op32) : (op64), \ |
| (insn->imm & BPF_FETCH) ? src_reg : REG_W0, \ |
| src_reg, dst_reg, off); \ |
| if (is32 && (insn->imm & BPF_FETCH)) \ |
| EMIT_ZERO(src_reg); \ |
| } while (0) |
| case BPF_ADD: |
| case BPF_ADD | BPF_FETCH: |
| /* {laal|laalg} */ |
| EMIT_ATOMIC(0x00fa, 0x00ea); |
| break; |
| case BPF_AND: |
| case BPF_AND | BPF_FETCH: |
| /* {lan|lang} */ |
| EMIT_ATOMIC(0x00f4, 0x00e4); |
| break; |
| case BPF_OR: |
| case BPF_OR | BPF_FETCH: |
| /* {lao|laog} */ |
| EMIT_ATOMIC(0x00f6, 0x00e6); |
| break; |
| case BPF_XOR: |
| case BPF_XOR | BPF_FETCH: |
| /* {lax|laxg} */ |
| EMIT_ATOMIC(0x00f7, 0x00e7); |
| break; |
| #undef EMIT_ATOMIC |
| case BPF_XCHG: |
| /* {ly|lg} %w0,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, |
| is32 ? 0x0058 : 0x0004, REG_W0, REG_0, |
| dst_reg, off); |
| /* 0: {csy|csg} %w0,%src,off(%dst) */ |
| EMIT6_DISP_LH(0xeb000000, is32 ? 0x0014 : 0x0030, |
| REG_W0, src_reg, dst_reg, off); |
| /* brc 4,0b */ |
| EMIT4_PCREL_RIC(0xa7040000, 4, jit->prg - 6); |
| /* {llgfr|lgr} %src,%w0 */ |
| EMIT4(is32 ? 0xb9160000 : 0xb9040000, src_reg, REG_W0); |
| if (is32 && insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case BPF_CMPXCHG: |
| /* 0: {csy|csg} %b0,%src,off(%dst) */ |
| EMIT6_DISP_LH(0xeb000000, is32 ? 0x0014 : 0x0030, |
| BPF_REG_0, src_reg, dst_reg, off); |
| break; |
| default: |
| pr_err("Unknown atomic operation %02x\n", insn->imm); |
| return -1; |
| } |
| |
| jit->seen |= SEEN_MEM; |
| break; |
| } |
| /* |
| * BPF_LDX |
| */ |
| case BPF_LDX | BPF_MEM | BPF_B: /* dst = *(u8 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEM | BPF_B: |
| /* llgc %dst,0(off,%src) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0090, dst_reg, src_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case BPF_LDX | BPF_MEMSX | BPF_B: /* dst = *(s8 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEMSX | BPF_B: |
| /* lgb %dst,0(off,%src) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0077, dst_reg, src_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_LDX | BPF_MEM | BPF_H: /* dst = *(u16 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEM | BPF_H: |
| /* llgh %dst,0(off,%src) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0091, dst_reg, src_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case BPF_LDX | BPF_MEMSX | BPF_H: /* dst = *(s16 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEMSX | BPF_H: |
| /* lgh %dst,0(off,%src) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0015, dst_reg, src_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_LDX | BPF_MEM | BPF_W: /* dst = *(u32 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEM | BPF_W: |
| /* llgf %dst,off(%src) */ |
| jit->seen |= SEEN_MEM; |
| EMIT6_DISP_LH(0xe3000000, 0x0016, dst_reg, src_reg, REG_0, off); |
| if (insn_is_zext(&insn[1])) |
| insn_count = 2; |
| break; |
| case BPF_LDX | BPF_MEMSX | BPF_W: /* dst = *(s32 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEMSX | BPF_W: |
| /* lgf %dst,off(%src) */ |
| jit->seen |= SEEN_MEM; |
| EMIT6_DISP_LH(0xe3000000, 0x0014, dst_reg, src_reg, REG_0, off); |
| break; |
| case BPF_LDX | BPF_MEM | BPF_DW: /* dst = *(u64 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_PROBE_MEM | BPF_DW: |
| /* lg %dst,0(off,%src) */ |
| jit->seen |= SEEN_MEM; |
| EMIT6_DISP_LH(0xe3000000, 0x0004, dst_reg, src_reg, REG_0, off); |
| break; |
| /* |
| * BPF_JMP / CALL |
| */ |
| case BPF_JMP | BPF_CALL: |
| { |
| const struct btf_func_model *m; |
| bool func_addr_fixed; |
| int j, ret; |
| u64 func; |
| |
| ret = bpf_jit_get_func_addr(fp, insn, extra_pass, |
| &func, &func_addr_fixed); |
| if (ret < 0) |
| return -1; |
| |
| REG_SET_SEEN(BPF_REG_5); |
| jit->seen |= SEEN_FUNC; |
| /* |
| * Copy the tail call counter to where the callee expects it. |
| * |
| * Note 1: The callee can increment the tail call counter, but |
| * we do not load it back, since the x86 JIT does not do this |
| * either. |
| * |
| * Note 2: We assume that the verifier does not let us call the |
| * main program, which clears the tail call counter on entry. |
| */ |
| /* mvc STK_OFF_TCCNT(4,%r15),N(%r15) */ |
| _EMIT6(0xd203f000 | STK_OFF_TCCNT, |
| 0xf000 | (STK_OFF_TCCNT + STK_OFF + stack_depth)); |
| |
| /* Sign-extend the kfunc arguments. */ |
| if (insn->src_reg == BPF_PSEUDO_KFUNC_CALL) { |
| m = bpf_jit_find_kfunc_model(fp, insn); |
| if (!m) |
| return -1; |
| |
| for (j = 0; j < m->nr_args; j++) { |
| if (sign_extend(jit, BPF_REG_1 + j, |
| m->arg_size[j], |
| m->arg_flags[j])) |
| return -1; |
| } |
| } |
| |
| /* lgrl %w1,func */ |
| EMIT6_PCREL_RILB(0xc4080000, REG_W1, _EMIT_CONST_U64(func)); |
| /* %r1() */ |
| call_r1(jit); |
| /* lgr %b0,%r2: load return value into %b0 */ |
| EMIT4(0xb9040000, BPF_REG_0, REG_2); |
| break; |
| } |
| case BPF_JMP | BPF_TAIL_CALL: { |
| int patch_1_clrj, patch_2_clij, patch_3_brc; |
| |
| /* |
| * Implicit input: |
| * B1: pointer to ctx |
| * B2: pointer to bpf_array |
| * B3: index in bpf_array |
| * |
| * if (index >= array->map.max_entries) |
| * goto out; |
| */ |
| |
| /* llgf %w1,map.max_entries(%b2) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2, |
| offsetof(struct bpf_array, map.max_entries)); |
| /* if ((u32)%b3 >= (u32)%w1) goto out; */ |
| /* clrj %b3,%w1,0xa,out */ |
| patch_1_clrj = jit->prg; |
| EMIT6_PCREL_RIEB(0xec000000, 0x0077, BPF_REG_3, REG_W1, 0xa, |
| jit->prg); |
| |
| /* |
| * if (tail_call_cnt++ >= MAX_TAIL_CALL_CNT) |
| * goto out; |
| */ |
| |
| if (jit->seen & SEEN_STACK) |
| off = STK_OFF_TCCNT + STK_OFF + stack_depth; |
| else |
| off = STK_OFF_TCCNT; |
| /* lhi %w0,1 */ |
| EMIT4_IMM(0xa7080000, REG_W0, 1); |
| /* laal %w1,%w0,off(%r15) */ |
| EMIT6_DISP_LH(0xeb000000, 0x00fa, REG_W1, REG_W0, REG_15, off); |
| /* clij %w1,MAX_TAIL_CALL_CNT-1,0x2,out */ |
| patch_2_clij = jit->prg; |
| EMIT6_PCREL_RIEC(0xec000000, 0x007f, REG_W1, MAX_TAIL_CALL_CNT - 1, |
| 2, jit->prg); |
| |
| /* |
| * prog = array->ptrs[index]; |
| * if (prog == NULL) |
| * goto out; |
| */ |
| |
| /* llgfr %r1,%b3: %r1 = (u32) index */ |
| EMIT4(0xb9160000, REG_1, BPF_REG_3); |
| /* sllg %r1,%r1,3: %r1 *= 8 */ |
| EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, REG_1, REG_0, 3); |
| /* ltg %r1,prog(%b2,%r1) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0002, REG_1, BPF_REG_2, |
| REG_1, offsetof(struct bpf_array, ptrs)); |
| /* brc 0x8,out */ |
| patch_3_brc = jit->prg; |
| EMIT4_PCREL_RIC(0xa7040000, 8, jit->prg); |
| |
| /* |
| * Restore registers before calling function |
| */ |
| save_restore_regs(jit, REGS_RESTORE, stack_depth); |
| |
| /* |
| * goto *(prog->bpf_func + tail_call_start); |
| */ |
| |
| /* lg %r1,bpf_func(%r1) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, REG_1, REG_0, |
| offsetof(struct bpf_prog, bpf_func)); |
| if (nospec_uses_trampoline()) { |
| jit->seen |= SEEN_FUNC; |
| /* aghi %r1,tail_call_start */ |
| EMIT4_IMM(0xa70b0000, REG_1, jit->tail_call_start); |
| /* brcl 0xf,__s390_indirect_jump_r1 */ |
| EMIT6_PCREL_RILC(0xc0040000, 0xf, jit->r1_thunk_ip); |
| } else { |
| /* bc 0xf,tail_call_start(%r1) */ |
| _EMIT4(0x47f01000 + jit->tail_call_start); |
| } |
| /* out: */ |
| if (jit->prg_buf) { |
| *(u16 *)(jit->prg_buf + patch_1_clrj + 2) = |
| (jit->prg - patch_1_clrj) >> 1; |
| *(u16 *)(jit->prg_buf + patch_2_clij + 2) = |
| (jit->prg - patch_2_clij) >> 1; |
| *(u16 *)(jit->prg_buf + patch_3_brc + 2) = |
| (jit->prg - patch_3_brc) >> 1; |
| } |
| break; |
| } |
| case BPF_JMP | BPF_EXIT: /* return b0 */ |
| last = (i == fp->len - 1) ? 1 : 0; |
| if (last) |
| break; |
| if (!is_first_pass(jit) && can_use_rel(jit, jit->exit_ip)) |
| /* brc 0xf, <exit> */ |
| EMIT4_PCREL_RIC(0xa7040000, 0xf, jit->exit_ip); |
| else |
| /* brcl 0xf, <exit> */ |
| EMIT6_PCREL_RILC(0xc0040000, 0xf, jit->exit_ip); |
| break; |
| /* |
| * Branch relative (number of skipped instructions) to offset on |
| * condition. |
| * |
| * Condition code to mask mapping: |
| * |
| * CC | Description | Mask |
| * ------------------------------ |
| * 0 | Operands equal | 8 |
| * 1 | First operand low | 4 |
| * 2 | First operand high | 2 |
| * 3 | Unused | 1 |
| * |
| * For s390x relative branches: ip = ip + off_bytes |
| * For BPF relative branches: insn = insn + off_insns + 1 |
| * |
| * For example for s390x with offset 0 we jump to the branch |
| * instruction itself (loop) and for BPF with offset 0 we |
| * branch to the instruction behind the branch. |
| */ |
| case BPF_JMP32 | BPF_JA: /* if (true) */ |
| branch_oc_off = imm; |
| fallthrough; |
| case BPF_JMP | BPF_JA: /* if (true) */ |
| mask = 0xf000; /* j */ |
| goto branch_oc; |
| case BPF_JMP | BPF_JSGT | BPF_K: /* ((s64) dst > (s64) imm) */ |
| case BPF_JMP32 | BPF_JSGT | BPF_K: /* ((s32) dst > (s32) imm) */ |
| mask = 0x2000; /* jh */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JSLT | BPF_K: /* ((s64) dst < (s64) imm) */ |
| case BPF_JMP32 | BPF_JSLT | BPF_K: /* ((s32) dst < (s32) imm) */ |
| mask = 0x4000; /* jl */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JSGE | BPF_K: /* ((s64) dst >= (s64) imm) */ |
| case BPF_JMP32 | BPF_JSGE | BPF_K: /* ((s32) dst >= (s32) imm) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JSLE | BPF_K: /* ((s64) dst <= (s64) imm) */ |
| case BPF_JMP32 | BPF_JSLE | BPF_K: /* ((s32) dst <= (s32) imm) */ |
| mask = 0xc000; /* jle */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JGT | BPF_K: /* (dst_reg > imm) */ |
| case BPF_JMP32 | BPF_JGT | BPF_K: /* ((u32) dst_reg > (u32) imm) */ |
| mask = 0x2000; /* jh */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JLT | BPF_K: /* (dst_reg < imm) */ |
| case BPF_JMP32 | BPF_JLT | BPF_K: /* ((u32) dst_reg < (u32) imm) */ |
| mask = 0x4000; /* jl */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JGE | BPF_K: /* (dst_reg >= imm) */ |
| case BPF_JMP32 | BPF_JGE | BPF_K: /* ((u32) dst_reg >= (u32) imm) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JLE | BPF_K: /* (dst_reg <= imm) */ |
| case BPF_JMP32 | BPF_JLE | BPF_K: /* ((u32) dst_reg <= (u32) imm) */ |
| mask = 0xc000; /* jle */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JNE | BPF_K: /* (dst_reg != imm) */ |
| case BPF_JMP32 | BPF_JNE | BPF_K: /* ((u32) dst_reg != (u32) imm) */ |
| mask = 0x7000; /* jne */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JEQ | BPF_K: /* (dst_reg == imm) */ |
| case BPF_JMP32 | BPF_JEQ | BPF_K: /* ((u32) dst_reg == (u32) imm) */ |
| mask = 0x8000; /* je */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JSET | BPF_K: /* (dst_reg & imm) */ |
| case BPF_JMP32 | BPF_JSET | BPF_K: /* ((u32) dst_reg & (u32) imm) */ |
| mask = 0x7000; /* jnz */ |
| if (BPF_CLASS(insn->code) == BPF_JMP32) { |
| /* llilf %w1,imm (load zero extend imm) */ |
| EMIT6_IMM(0xc00f0000, REG_W1, imm); |
| /* nr %w1,%dst */ |
| EMIT2(0x1400, REG_W1, dst_reg); |
| } else { |
| /* lgfi %w1,imm (load sign extend imm) */ |
| EMIT6_IMM(0xc0010000, REG_W1, imm); |
| /* ngr %w1,%dst */ |
| EMIT4(0xb9800000, REG_W1, dst_reg); |
| } |
| goto branch_oc; |
| |
| case BPF_JMP | BPF_JSGT | BPF_X: /* ((s64) dst > (s64) src) */ |
| case BPF_JMP32 | BPF_JSGT | BPF_X: /* ((s32) dst > (s32) src) */ |
| mask = 0x2000; /* jh */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JSLT | BPF_X: /* ((s64) dst < (s64) src) */ |
| case BPF_JMP32 | BPF_JSLT | BPF_X: /* ((s32) dst < (s32) src) */ |
| mask = 0x4000; /* jl */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JSGE | BPF_X: /* ((s64) dst >= (s64) src) */ |
| case BPF_JMP32 | BPF_JSGE | BPF_X: /* ((s32) dst >= (s32) src) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JSLE | BPF_X: /* ((s64) dst <= (s64) src) */ |
| case BPF_JMP32 | BPF_JSLE | BPF_X: /* ((s32) dst <= (s32) src) */ |
| mask = 0xc000; /* jle */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JGT | BPF_X: /* (dst > src) */ |
| case BPF_JMP32 | BPF_JGT | BPF_X: /* ((u32) dst > (u32) src) */ |
| mask = 0x2000; /* jh */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JLT | BPF_X: /* (dst < src) */ |
| case BPF_JMP32 | BPF_JLT | BPF_X: /* ((u32) dst < (u32) src) */ |
| mask = 0x4000; /* jl */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JGE | BPF_X: /* (dst >= src) */ |
| case BPF_JMP32 | BPF_JGE | BPF_X: /* ((u32) dst >= (u32) src) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JLE | BPF_X: /* (dst <= src) */ |
| case BPF_JMP32 | BPF_JLE | BPF_X: /* ((u32) dst <= (u32) src) */ |
| mask = 0xc000; /* jle */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JNE | BPF_X: /* (dst != src) */ |
| case BPF_JMP32 | BPF_JNE | BPF_X: /* ((u32) dst != (u32) src) */ |
| mask = 0x7000; /* jne */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JEQ | BPF_X: /* (dst == src) */ |
| case BPF_JMP32 | BPF_JEQ | BPF_X: /* ((u32) dst == (u32) src) */ |
| mask = 0x8000; /* je */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JSET | BPF_X: /* (dst & src) */ |
| case BPF_JMP32 | BPF_JSET | BPF_X: /* ((u32) dst & (u32) src) */ |
| { |
| bool is_jmp32 = BPF_CLASS(insn->code) == BPF_JMP32; |
| |
| mask = 0x7000; /* jnz */ |
| /* nrk or ngrk %w1,%dst,%src */ |
| EMIT4_RRF((is_jmp32 ? 0xb9f40000 : 0xb9e40000), |
| REG_W1, dst_reg, src_reg); |
| goto branch_oc; |
| branch_ks: |
| is_jmp32 = BPF_CLASS(insn->code) == BPF_JMP32; |
| /* cfi or cgfi %dst,imm */ |
| EMIT6_IMM(is_jmp32 ? 0xc20d0000 : 0xc20c0000, |
| dst_reg, imm); |
| if (!is_first_pass(jit) && |
| can_use_rel(jit, addrs[i + off + 1])) { |
| /* brc mask,off */ |
| EMIT4_PCREL_RIC(0xa7040000, |
| mask >> 12, addrs[i + off + 1]); |
| } else { |
| /* brcl mask,off */ |
| EMIT6_PCREL_RILC(0xc0040000, |
| mask >> 12, addrs[i + off + 1]); |
| } |
| break; |
| branch_ku: |
| /* lgfi %w1,imm (load sign extend imm) */ |
| src_reg = REG_1; |
| EMIT6_IMM(0xc0010000, src_reg, imm); |
| goto branch_xu; |
| branch_xs: |
| is_jmp32 = BPF_CLASS(insn->code) == BPF_JMP32; |
| if (!is_first_pass(jit) && |
| can_use_rel(jit, addrs[i + off + 1])) { |
| /* crj or cgrj %dst,%src,mask,off */ |
| EMIT6_PCREL(0xec000000, (is_jmp32 ? 0x0076 : 0x0064), |
| dst_reg, src_reg, i, off, mask); |
| } else { |
| /* cr or cgr %dst,%src */ |
| if (is_jmp32) |
| EMIT2(0x1900, dst_reg, src_reg); |
| else |
| EMIT4(0xb9200000, dst_reg, src_reg); |
| /* brcl mask,off */ |
| EMIT6_PCREL_RILC(0xc0040000, |
| mask >> 12, addrs[i + off + 1]); |
| } |
| break; |
| branch_xu: |
| is_jmp32 = BPF_CLASS(insn->code) == BPF_JMP32; |
| if (!is_first_pass(jit) && |
| can_use_rel(jit, addrs[i + off + 1])) { |
| /* clrj or clgrj %dst,%src,mask,off */ |
| EMIT6_PCREL(0xec000000, (is_jmp32 ? 0x0077 : 0x0065), |
| dst_reg, src_reg, i, off, mask); |
| } else { |
| /* clr or clgr %dst,%src */ |
| if (is_jmp32) |
| EMIT2(0x1500, dst_reg, src_reg); |
| else |
| EMIT4(0xb9210000, dst_reg, src_reg); |
| /* brcl mask,off */ |
| EMIT6_PCREL_RILC(0xc0040000, |
| mask >> 12, addrs[i + off + 1]); |
| } |
| break; |
| branch_oc: |
| if (!is_first_pass(jit) && |
| can_use_rel(jit, addrs[i + branch_oc_off + 1])) { |
| /* brc mask,off */ |
| EMIT4_PCREL_RIC(0xa7040000, |
| mask >> 12, |
| addrs[i + branch_oc_off + 1]); |
| } else { |
| /* brcl mask,off */ |
| EMIT6_PCREL_RILC(0xc0040000, |
| mask >> 12, |
| addrs[i + branch_oc_off + 1]); |
| } |
| break; |
| } |
| default: /* too complex, give up */ |
| pr_err("Unknown opcode %02x\n", insn->code); |
| return -1; |
| } |
| |
| if (probe_prg != -1) { |
| /* |
| * Handlers of certain exceptions leave psw.addr pointing to |
| * the instruction directly after the failing one. Therefore, |
| * create two exception table entries and also add a nop in |
| * case two probing instructions come directly after each |
| * other. |
| */ |
| nop_prg = jit->prg; |
| /* bcr 0,%0 */ |
| _EMIT2(0x0700); |
| err = bpf_jit_probe_mem(jit, fp, probe_prg, nop_prg); |
| if (err < 0) |
| return err; |
| } |
| |
| return insn_count; |
| } |
| |
| /* |
| * Return whether new i-th instruction address does not violate any invariant |
| */ |
| static bool bpf_is_new_addr_sane(struct bpf_jit *jit, int i) |
| { |
| /* On the first pass anything goes */ |
| if (is_first_pass(jit)) |
| return true; |
| |
| /* The codegen pass must not change anything */ |
| if (is_codegen_pass(jit)) |
| return jit->addrs[i] == jit->prg; |
| |
| /* Passes in between must not increase code size */ |
| return jit->addrs[i] >= jit->prg; |
| } |
| |
| /* |
| * Update the address of i-th instruction |
| */ |
| static int bpf_set_addr(struct bpf_jit *jit, int i) |
| { |
| int delta; |
| |
| if (is_codegen_pass(jit)) { |
| delta = jit->prg - jit->addrs[i]; |
| if (delta < 0) |
| bpf_skip(jit, -delta); |
| } |
| if (WARN_ON_ONCE(!bpf_is_new_addr_sane(jit, i))) |
| return -1; |
| jit->addrs[i] = jit->prg; |
| return 0; |
| } |
| |
| /* |
| * Compile eBPF program into s390x code |
| */ |
| static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp, |
| bool extra_pass, u32 stack_depth) |
| { |
| int i, insn_count, lit32_size, lit64_size; |
| |
| jit->lit32 = jit->lit32_start; |
| jit->lit64 = jit->lit64_start; |
| jit->prg = 0; |
| jit->excnt = 0; |
| |
| bpf_jit_prologue(jit, fp, stack_depth); |
| if (bpf_set_addr(jit, 0) < 0) |
| return -1; |
| for (i = 0; i < fp->len; i += insn_count) { |
| insn_count = bpf_jit_insn(jit, fp, i, extra_pass, stack_depth); |
| if (insn_count < 0) |
| return -1; |
| /* Next instruction address */ |
| if (bpf_set_addr(jit, i + insn_count) < 0) |
| return -1; |
| } |
| bpf_jit_epilogue(jit, stack_depth); |
| |
| lit32_size = jit->lit32 - jit->lit32_start; |
| lit64_size = jit->lit64 - jit->lit64_start; |
| jit->lit32_start = jit->prg; |
| if (lit32_size) |
| jit->lit32_start = ALIGN(jit->lit32_start, 4); |
| jit->lit64_start = jit->lit32_start + lit32_size; |
| if (lit64_size) |
| jit->lit64_start = ALIGN(jit->lit64_start, 8); |
| jit->size = jit->lit64_start + lit64_size; |
| jit->size_prg = jit->prg; |
| |
| if (WARN_ON_ONCE(fp->aux->extable && |
| jit->excnt != fp->aux->num_exentries)) |
| /* Verifier bug - too many entries. */ |
| return -1; |
| |
| return 0; |
| } |
| |
| bool bpf_jit_needs_zext(void) |
| { |
| return true; |
| } |
| |
| struct s390_jit_data { |
| struct bpf_binary_header *header; |
| struct bpf_jit ctx; |
| int pass; |
| }; |
| |
| static struct bpf_binary_header *bpf_jit_alloc(struct bpf_jit *jit, |
| struct bpf_prog *fp) |
| { |
| struct bpf_binary_header *header; |
| u32 extable_size; |
| u32 code_size; |
| |
| /* We need two entries per insn. */ |
| fp->aux->num_exentries *= 2; |
| |
| code_size = roundup(jit->size, |
| __alignof__(struct exception_table_entry)); |
| extable_size = fp->aux->num_exentries * |
| sizeof(struct exception_table_entry); |
| header = bpf_jit_binary_alloc(code_size + extable_size, &jit->prg_buf, |
| 8, jit_fill_hole); |
| if (!header) |
| return NULL; |
| fp->aux->extable = (struct exception_table_entry *) |
| (jit->prg_buf + code_size); |
| return header; |
| } |
| |
| /* |
| * Compile eBPF program "fp" |
| */ |
| struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) |
| { |
| u32 stack_depth = round_up(fp->aux->stack_depth, 8); |
| struct bpf_prog *tmp, *orig_fp = fp; |
| struct bpf_binary_header *header; |
| struct s390_jit_data *jit_data; |
| bool tmp_blinded = false; |
| bool extra_pass = false; |
| struct bpf_jit jit; |
| int pass; |
| |
| if (!fp->jit_requested) |
| return orig_fp; |
| |
| tmp = bpf_jit_blind_constants(fp); |
| /* |
| * If blinding was requested and we failed during blinding, |
| * we must fall back to the interpreter. |
| */ |
| if (IS_ERR(tmp)) |
| return orig_fp; |
| if (tmp != fp) { |
| tmp_blinded = true; |
| fp = tmp; |
| } |
| |
| jit_data = fp->aux->jit_data; |
| if (!jit_data) { |
| jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); |
| if (!jit_data) { |
| fp = orig_fp; |
| goto out; |
| } |
| fp->aux->jit_data = jit_data; |
| } |
| if (jit_data->ctx.addrs) { |
| jit = jit_data->ctx; |
| header = jit_data->header; |
| extra_pass = true; |
| pass = jit_data->pass + 1; |
| goto skip_init_ctx; |
| } |
| |
| memset(&jit, 0, sizeof(jit)); |
| jit.addrs = kvcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL); |
| if (jit.addrs == NULL) { |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| /* |
| * Three initial passes: |
| * - 1/2: Determine clobbered registers |
| * - 3: Calculate program size and addrs array |
| */ |
| for (pass = 1; pass <= 3; pass++) { |
| if (bpf_jit_prog(&jit, fp, extra_pass, stack_depth)) { |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| } |
| /* |
| * Final pass: Allocate and generate program |
| */ |
| header = bpf_jit_alloc(&jit, fp); |
| if (!header) { |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| skip_init_ctx: |
| if (bpf_jit_prog(&jit, fp, extra_pass, stack_depth)) { |
| bpf_jit_binary_free(header); |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| if (bpf_jit_enable > 1) { |
| bpf_jit_dump(fp->len, jit.size, pass, jit.prg_buf); |
| print_fn_code(jit.prg_buf, jit.size_prg); |
| } |
| if (!fp->is_func || extra_pass) { |
| bpf_jit_binary_lock_ro(header); |
| } else { |
| jit_data->header = header; |
| jit_data->ctx = jit; |
| jit_data->pass = pass; |
| } |
| fp->bpf_func = (void *) jit.prg_buf; |
| fp->jited = 1; |
| fp->jited_len = jit.size; |
| |
| if (!fp->is_func || extra_pass) { |
| bpf_prog_fill_jited_linfo(fp, jit.addrs + 1); |
| free_addrs: |
| kvfree(jit.addrs); |
| kfree(jit_data); |
| fp->aux->jit_data = NULL; |
| } |
| out: |
| if (tmp_blinded) |
| bpf_jit_prog_release_other(fp, fp == orig_fp ? |
| tmp : orig_fp); |
| return fp; |
| } |
| |
| bool bpf_jit_supports_kfunc_call(void) |
| { |
| return true; |
| } |
| |
| bool bpf_jit_supports_far_kfunc_call(void) |
| { |
| return true; |
| } |
| |
| int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, |
| void *old_addr, void *new_addr) |
| { |
| struct bpf_plt expected_plt, current_plt, new_plt, *plt; |
| struct { |
| u16 opc; |
| s32 disp; |
| } __packed insn; |
| char *ret; |
| int err; |
| |
| /* Verify the branch to be patched. */ |
| err = copy_from_kernel_nofault(&insn, ip, sizeof(insn)); |
| if (err < 0) |
| return err; |
| if (insn.opc != (0xc004 | (old_addr ? 0xf0 : 0))) |
| return -EINVAL; |
| |
| if (t == BPF_MOD_JUMP && |
| insn.disp == ((char *)new_addr - (char *)ip) >> 1) { |
| /* |
| * The branch already points to the destination, |
| * there is no PLT. |
| */ |
| } else { |
| /* Verify the PLT. */ |
| plt = ip + (insn.disp << 1); |
| err = copy_from_kernel_nofault(¤t_plt, plt, |
| sizeof(current_plt)); |
| if (err < 0) |
| return err; |
| ret = (char *)ip + 6; |
| bpf_jit_plt(&expected_plt, ret, old_addr); |
| if (memcmp(¤t_plt, &expected_plt, sizeof(current_plt))) |
| return -EINVAL; |
| /* Adjust the call address. */ |
| bpf_jit_plt(&new_plt, ret, new_addr); |
| s390_kernel_write(&plt->target, &new_plt.target, |
| sizeof(void *)); |
| } |
| |
| /* Adjust the mask of the branch. */ |
| insn.opc = 0xc004 | (new_addr ? 0xf0 : 0); |
| s390_kernel_write((char *)ip + 1, (char *)&insn.opc + 1, 1); |
| |
| /* Make the new code visible to the other CPUs. */ |
| text_poke_sync_lock(); |
| |
| return 0; |
| } |
| |
| struct bpf_tramp_jit { |
| struct bpf_jit common; |
| int orig_stack_args_off;/* Offset of arguments placed on stack by the |
| * func_addr's original caller |
| */ |
| int stack_size; /* Trampoline stack size */ |
| int backchain_off; /* Offset of backchain */ |
| int stack_args_off; /* Offset of stack arguments for calling |
| * func_addr, has to be at the top |
| */ |
| int reg_args_off; /* Offset of register arguments for calling |
| * func_addr |
| */ |
| int ip_off; /* For bpf_get_func_ip(), has to be at |
| * (ctx - 16) |
| */ |
| int arg_cnt_off; /* For bpf_get_func_arg_cnt(), has to be at |
| * (ctx - 8) |
| */ |
| int bpf_args_off; /* Offset of BPF_PROG context, which consists |
| * of BPF arguments followed by return value |
| */ |
| int retval_off; /* Offset of return value (see above) */ |
| int r7_r8_off; /* Offset of saved %r7 and %r8, which are used |
| * for __bpf_prog_enter() return value and |
| * func_addr respectively |
| */ |
| int run_ctx_off; /* Offset of struct bpf_tramp_run_ctx */ |
| int tccnt_off; /* Offset of saved tailcall counter */ |
| int r14_off; /* Offset of saved %r14, has to be at the |
| * bottom */ |
| int do_fexit; /* do_fexit: label */ |
| }; |
| |
| static void load_imm64(struct bpf_jit *jit, int dst_reg, u64 val) |
| { |
| /* llihf %dst_reg,val_hi */ |
| EMIT6_IMM(0xc00e0000, dst_reg, (val >> 32)); |
| /* oilf %rdst_reg,val_lo */ |
| EMIT6_IMM(0xc00d0000, dst_reg, val); |
| } |
| |
| static int invoke_bpf_prog(struct bpf_tramp_jit *tjit, |
| const struct btf_func_model *m, |
| struct bpf_tramp_link *tlink, bool save_ret) |
| { |
| struct bpf_jit *jit = &tjit->common; |
| int cookie_off = tjit->run_ctx_off + |
| offsetof(struct bpf_tramp_run_ctx, bpf_cookie); |
| struct bpf_prog *p = tlink->link.prog; |
| int patch; |
| |
| /* |
| * run_ctx.cookie = tlink->cookie; |
| */ |
| |
| /* %r0 = tlink->cookie */ |
| load_imm64(jit, REG_W0, tlink->cookie); |
| /* stg %r0,cookie_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W0, REG_0, REG_15, cookie_off); |
| |
| /* |
| * if ((start = __bpf_prog_enter(p, &run_ctx)) == 0) |
| * goto skip; |
| */ |
| |
| /* %r1 = __bpf_prog_enter */ |
| load_imm64(jit, REG_1, (u64)bpf_trampoline_enter(p)); |
| /* %r2 = p */ |
| load_imm64(jit, REG_2, (u64)p); |
| /* la %r3,run_ctx_off(%r15) */ |
| EMIT4_DISP(0x41000000, REG_3, REG_15, tjit->run_ctx_off); |
| /* %r1() */ |
| call_r1(jit); |
| /* ltgr %r7,%r2 */ |
| EMIT4(0xb9020000, REG_7, REG_2); |
| /* brcl 8,skip */ |
| patch = jit->prg; |
| EMIT6_PCREL_RILC(0xc0040000, 8, 0); |
| |
| /* |
| * retval = bpf_func(args, p->insnsi); |
| */ |
| |
| /* %r1 = p->bpf_func */ |
| load_imm64(jit, REG_1, (u64)p->bpf_func); |
| /* la %r2,bpf_args_off(%r15) */ |
| EMIT4_DISP(0x41000000, REG_2, REG_15, tjit->bpf_args_off); |
| /* %r3 = p->insnsi */ |
| if (!p->jited) |
| load_imm64(jit, REG_3, (u64)p->insnsi); |
| /* %r1() */ |
| call_r1(jit); |
| /* stg %r2,retval_off(%r15) */ |
| if (save_ret) { |
| if (sign_extend(jit, REG_2, m->ret_size, m->ret_flags)) |
| return -1; |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_2, REG_0, REG_15, |
| tjit->retval_off); |
| } |
| |
| /* skip: */ |
| if (jit->prg_buf) |
| *(u32 *)&jit->prg_buf[patch + 2] = (jit->prg - patch) >> 1; |
| |
| /* |
| * __bpf_prog_exit(p, start, &run_ctx); |
| */ |
| |
| /* %r1 = __bpf_prog_exit */ |
| load_imm64(jit, REG_1, (u64)bpf_trampoline_exit(p)); |
| /* %r2 = p */ |
| load_imm64(jit, REG_2, (u64)p); |
| /* lgr %r3,%r7 */ |
| EMIT4(0xb9040000, REG_3, REG_7); |
| /* la %r4,run_ctx_off(%r15) */ |
| EMIT4_DISP(0x41000000, REG_4, REG_15, tjit->run_ctx_off); |
| /* %r1() */ |
| call_r1(jit); |
| |
| return 0; |
| } |
| |
| static int alloc_stack(struct bpf_tramp_jit *tjit, size_t size) |
| { |
| int stack_offset = tjit->stack_size; |
| |
| tjit->stack_size += size; |
| return stack_offset; |
| } |
| |
| /* ABI uses %r2 - %r6 for parameter passing. */ |
| #define MAX_NR_REG_ARGS 5 |
| |
| /* The "L" field of the "mvc" instruction is 8 bits. */ |
| #define MAX_MVC_SIZE 256 |
| #define MAX_NR_STACK_ARGS (MAX_MVC_SIZE / sizeof(u64)) |
| |
| /* -mfentry generates a 6-byte nop on s390x. */ |
| #define S390X_PATCH_SIZE 6 |
| |
| static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, |
| struct bpf_tramp_jit *tjit, |
| const struct btf_func_model *m, |
| u32 flags, |
| struct bpf_tramp_links *tlinks, |
| void *func_addr) |
| { |
| struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN]; |
| struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY]; |
| struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT]; |
| int nr_bpf_args, nr_reg_args, nr_stack_args; |
| struct bpf_jit *jit = &tjit->common; |
| int arg, bpf_arg_off; |
| int i, j; |
| |
| /* Support as many stack arguments as "mvc" instruction can handle. */ |
| nr_reg_args = min_t(int, m->nr_args, MAX_NR_REG_ARGS); |
| nr_stack_args = m->nr_args - nr_reg_args; |
| if (nr_stack_args > MAX_NR_STACK_ARGS) |
| return -ENOTSUPP; |
| |
| /* Return to %r14, since func_addr and %r0 are not available. */ |
| if ((!func_addr && !(flags & BPF_TRAMP_F_ORIG_STACK)) || |
| (flags & BPF_TRAMP_F_INDIRECT)) |
| flags |= BPF_TRAMP_F_SKIP_FRAME; |
| |
| /* |
| * Compute how many arguments we need to pass to BPF programs. |
| * BPF ABI mirrors that of x86_64: arguments that are 16 bytes or |
| * smaller are packed into 1 or 2 registers; larger arguments are |
| * passed via pointers. |
| * In s390x ABI, arguments that are 8 bytes or smaller are packed into |
| * a register; larger arguments are passed via pointers. |
| * We need to deal with this difference. |
| */ |
| nr_bpf_args = 0; |
| for (i = 0; i < m->nr_args; i++) { |
| if (m->arg_size[i] <= 8) |
| nr_bpf_args += 1; |
| else if (m->arg_size[i] <= 16) |
| nr_bpf_args += 2; |
| else |
| return -ENOTSUPP; |
| } |
| |
| /* |
| * Calculate the stack layout. |
| */ |
| |
| /* |
| * Allocate STACK_FRAME_OVERHEAD bytes for the callees. As the s390x |
| * ABI requires, put our backchain at the end of the allocated memory. |
| */ |
| tjit->stack_size = STACK_FRAME_OVERHEAD; |
| tjit->backchain_off = tjit->stack_size - sizeof(u64); |
| tjit->stack_args_off = alloc_stack(tjit, nr_stack_args * sizeof(u64)); |
| tjit->reg_args_off = alloc_stack(tjit, nr_reg_args * sizeof(u64)); |
| tjit->ip_off = alloc_stack(tjit, sizeof(u64)); |
| tjit->arg_cnt_off = alloc_stack(tjit, sizeof(u64)); |
| tjit->bpf_args_off = alloc_stack(tjit, nr_bpf_args * sizeof(u64)); |
| tjit->retval_off = alloc_stack(tjit, sizeof(u64)); |
| tjit->r7_r8_off = alloc_stack(tjit, 2 * sizeof(u64)); |
| tjit->run_ctx_off = alloc_stack(tjit, |
| sizeof(struct bpf_tramp_run_ctx)); |
| tjit->tccnt_off = alloc_stack(tjit, sizeof(u64)); |
| tjit->r14_off = alloc_stack(tjit, sizeof(u64) * 2); |
| /* |
| * In accordance with the s390x ABI, the caller has allocated |
| * STACK_FRAME_OVERHEAD bytes for us. 8 of them contain the caller's |
| * backchain, and the rest we can use. |
| */ |
| tjit->stack_size -= STACK_FRAME_OVERHEAD - sizeof(u64); |
| tjit->orig_stack_args_off = tjit->stack_size + STACK_FRAME_OVERHEAD; |
| |
| /* lgr %r1,%r15 */ |
| EMIT4(0xb9040000, REG_1, REG_15); |
| /* aghi %r15,-stack_size */ |
| EMIT4_IMM(0xa70b0000, REG_15, -tjit->stack_size); |
| /* stg %r1,backchain_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_1, REG_0, REG_15, |
| tjit->backchain_off); |
| /* mvc tccnt_off(4,%r15),stack_size+STK_OFF_TCCNT(%r15) */ |
| _EMIT6(0xd203f000 | tjit->tccnt_off, |
| 0xf000 | (tjit->stack_size + STK_OFF_TCCNT)); |
| /* stmg %r2,%rN,fwd_reg_args_off(%r15) */ |
| if (nr_reg_args) |
| EMIT6_DISP_LH(0xeb000000, 0x0024, REG_2, |
| REG_2 + (nr_reg_args - 1), REG_15, |
| tjit->reg_args_off); |
| for (i = 0, j = 0; i < m->nr_args; i++) { |
| if (i < MAX_NR_REG_ARGS) |
| arg = REG_2 + i; |
| else |
| arg = tjit->orig_stack_args_off + |
| (i - MAX_NR_REG_ARGS) * sizeof(u64); |
| bpf_arg_off = tjit->bpf_args_off + j * sizeof(u64); |
| if (m->arg_size[i] <= 8) { |
| if (i < MAX_NR_REG_ARGS) |
| /* stg %arg,bpf_arg_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, arg, |
| REG_0, REG_15, bpf_arg_off); |
| else |
| /* mvc bpf_arg_off(8,%r15),arg(%r15) */ |
| _EMIT6(0xd207f000 | bpf_arg_off, |
| 0xf000 | arg); |
| j += 1; |
| } else { |
| if (i < MAX_NR_REG_ARGS) { |
| /* mvc bpf_arg_off(16,%r15),0(%arg) */ |
| _EMIT6(0xd20ff000 | bpf_arg_off, |
| reg2hex[arg] << 12); |
| } else { |
| /* lg %r1,arg(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, REG_0, |
| REG_15, arg); |
| /* mvc bpf_arg_off(16,%r15),0(%r1) */ |
| _EMIT6(0xd20ff000 | bpf_arg_off, 0x1000); |
| } |
| j += 2; |
| } |
| } |
| /* stmg %r7,%r8,r7_r8_off(%r15) */ |
| EMIT6_DISP_LH(0xeb000000, 0x0024, REG_7, REG_8, REG_15, |
| tjit->r7_r8_off); |
| /* stg %r14,r14_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_14, REG_0, REG_15, tjit->r14_off); |
| |
| if (flags & BPF_TRAMP_F_ORIG_STACK) { |
| /* |
| * The ftrace trampoline puts the return address (which is the |
| * address of the original function + S390X_PATCH_SIZE) into |
| * %r0; see ftrace_shared_hotpatch_trampoline_br and |
| * ftrace_init_nop() for details. |
| */ |
| |
| /* lgr %r8,%r0 */ |
| EMIT4(0xb9040000, REG_8, REG_0); |
| } else { |
| /* %r8 = func_addr + S390X_PATCH_SIZE */ |
| load_imm64(jit, REG_8, (u64)func_addr + S390X_PATCH_SIZE); |
| } |
| |
| /* |
| * ip = func_addr; |
| * arg_cnt = m->nr_args; |
| */ |
| |
| if (flags & BPF_TRAMP_F_IP_ARG) { |
| /* %r0 = func_addr */ |
| load_imm64(jit, REG_0, (u64)func_addr); |
| /* stg %r0,ip_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_0, REG_0, REG_15, |
| tjit->ip_off); |
| } |
| /* lghi %r0,nr_bpf_args */ |
| EMIT4_IMM(0xa7090000, REG_0, nr_bpf_args); |
| /* stg %r0,arg_cnt_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_0, REG_0, REG_15, |
| tjit->arg_cnt_off); |
| |
| if (flags & BPF_TRAMP_F_CALL_ORIG) { |
| /* |
| * __bpf_tramp_enter(im); |
| */ |
| |
| /* %r1 = __bpf_tramp_enter */ |
| load_imm64(jit, REG_1, (u64)__bpf_tramp_enter); |
| /* %r2 = im */ |
| load_imm64(jit, REG_2, (u64)im); |
| /* %r1() */ |
| call_r1(jit); |
| } |
| |
| for (i = 0; i < fentry->nr_links; i++) |
| if (invoke_bpf_prog(tjit, m, fentry->links[i], |
| flags & BPF_TRAMP_F_RET_FENTRY_RET)) |
| return -EINVAL; |
| |
| if (fmod_ret->nr_links) { |
| /* |
| * retval = 0; |
| */ |
| |
| /* xc retval_off(8,%r15),retval_off(%r15) */ |
| _EMIT6(0xd707f000 | tjit->retval_off, |
| 0xf000 | tjit->retval_off); |
| |
| for (i = 0; i < fmod_ret->nr_links; i++) { |
| if (invoke_bpf_prog(tjit, m, fmod_ret->links[i], true)) |
| return -EINVAL; |
| |
| /* |
| * if (retval) |
| * goto do_fexit; |
| */ |
| |
| /* ltg %r0,retval_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0002, REG_0, REG_0, REG_15, |
| tjit->retval_off); |
| /* brcl 7,do_fexit */ |
| EMIT6_PCREL_RILC(0xc0040000, 7, tjit->do_fexit); |
| } |
| } |
| |
| if (flags & BPF_TRAMP_F_CALL_ORIG) { |
| /* |
| * retval = func_addr(args); |
| */ |
| |
| /* lmg %r2,%rN,reg_args_off(%r15) */ |
| if (nr_reg_args) |
| EMIT6_DISP_LH(0xeb000000, 0x0004, REG_2, |
| REG_2 + (nr_reg_args - 1), REG_15, |
| tjit->reg_args_off); |
| /* mvc stack_args_off(N,%r15),orig_stack_args_off(%r15) */ |
| if (nr_stack_args) |
| _EMIT6(0xd200f000 | |
| (nr_stack_args * sizeof(u64) - 1) << 16 | |
| tjit->stack_args_off, |
| 0xf000 | tjit->orig_stack_args_off); |
| /* mvc STK_OFF_TCCNT(4,%r15),tccnt_off(%r15) */ |
| _EMIT6(0xd203f000 | STK_OFF_TCCNT, 0xf000 | tjit->tccnt_off); |
| /* lgr %r1,%r8 */ |
| EMIT4(0xb9040000, REG_1, REG_8); |
| /* %r1() */ |
| call_r1(jit); |
| /* stg %r2,retval_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_2, REG_0, REG_15, |
| tjit->retval_off); |
| |
| im->ip_after_call = jit->prg_buf + jit->prg; |
| |
| /* |
| * The following nop will be patched by bpf_tramp_image_put(). |
| */ |
| |
| /* brcl 0,im->ip_epilogue */ |
| EMIT6_PCREL_RILC(0xc0040000, 0, (u64)im->ip_epilogue); |
| } |
| |
| /* do_fexit: */ |
| tjit->do_fexit = jit->prg; |
| for (i = 0; i < fexit->nr_links; i++) |
| if (invoke_bpf_prog(tjit, m, fexit->links[i], false)) |
| return -EINVAL; |
| |
| if (flags & BPF_TRAMP_F_CALL_ORIG) { |
| im->ip_epilogue = jit->prg_buf + jit->prg; |
| |
| /* |
| * __bpf_tramp_exit(im); |
| */ |
| |
| /* %r1 = __bpf_tramp_exit */ |
| load_imm64(jit, REG_1, (u64)__bpf_tramp_exit); |
| /* %r2 = im */ |
| load_imm64(jit, REG_2, (u64)im); |
| /* %r1() */ |
| call_r1(jit); |
| } |
| |
| /* lmg %r2,%rN,reg_args_off(%r15) */ |
| if ((flags & BPF_TRAMP_F_RESTORE_REGS) && nr_reg_args) |
| EMIT6_DISP_LH(0xeb000000, 0x0004, REG_2, |
| REG_2 + (nr_reg_args - 1), REG_15, |
| tjit->reg_args_off); |
| /* lgr %r1,%r8 */ |
| if (!(flags & BPF_TRAMP_F_SKIP_FRAME)) |
| EMIT4(0xb9040000, REG_1, REG_8); |
| /* lmg %r7,%r8,r7_r8_off(%r15) */ |
| EMIT6_DISP_LH(0xeb000000, 0x0004, REG_7, REG_8, REG_15, |
| tjit->r7_r8_off); |
| /* lg %r14,r14_off(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_14, REG_0, REG_15, tjit->r14_off); |
| /* lg %r2,retval_off(%r15) */ |
| if (flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET)) |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_2, REG_0, REG_15, |
| tjit->retval_off); |
| /* mvc stack_size+STK_OFF_TCCNT(4,%r15),tccnt_off(%r15) */ |
| _EMIT6(0xd203f000 | (tjit->stack_size + STK_OFF_TCCNT), |
| 0xf000 | tjit->tccnt_off); |
| /* aghi %r15,stack_size */ |
| EMIT4_IMM(0xa70b0000, REG_15, tjit->stack_size); |
| /* Emit an expoline for the following indirect jump. */ |
| if (nospec_uses_trampoline()) |
| emit_expoline(jit); |
| if (flags & BPF_TRAMP_F_SKIP_FRAME) |
| /* br %r14 */ |
| _EMIT2(0x07fe); |
| else |
| /* br %r1 */ |
| _EMIT2(0x07f1); |
| |
| emit_r1_thunk(jit); |
| |
| return 0; |
| } |
| |
| int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags, |
| struct bpf_tramp_links *tlinks, void *orig_call) |
| { |
| struct bpf_tramp_image im; |
| struct bpf_tramp_jit tjit; |
| int ret; |
| |
| memset(&tjit, 0, sizeof(tjit)); |
| |
| ret = __arch_prepare_bpf_trampoline(&im, &tjit, m, flags, |
| tlinks, orig_call); |
| |
| return ret < 0 ? ret : tjit.common.prg; |
| } |
| |
| int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, |
| void *image_end, const struct btf_func_model *m, |
| u32 flags, struct bpf_tramp_links *tlinks, |
| void *func_addr) |
| { |
| struct bpf_tramp_jit tjit; |
| int ret; |
| |
| /* Compute offsets, check whether the code fits. */ |
| memset(&tjit, 0, sizeof(tjit)); |
| ret = __arch_prepare_bpf_trampoline(im, &tjit, m, flags, |
| tlinks, func_addr); |
| |
| if (ret < 0) |
| return ret; |
| if (tjit.common.prg > (char *)image_end - (char *)image) |
| /* |
| * Use the same error code as for exceeding |
| * BPF_MAX_TRAMP_LINKS. |
| */ |
| return -E2BIG; |
| |
| tjit.common.prg = 0; |
| tjit.common.prg_buf = image; |
| ret = __arch_prepare_bpf_trampoline(im, &tjit, m, flags, |
| tlinks, func_addr); |
| |
| return ret < 0 ? ret : tjit.common.prg; |
| } |
| |
| bool bpf_jit_supports_subprog_tailcalls(void) |
| { |
| return true; |
| } |