| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _BCACHEFS_H |
| #define _BCACHEFS_H |
| |
| /* |
| * SOME HIGH LEVEL CODE DOCUMENTATION: |
| * |
| * Bcache mostly works with cache sets, cache devices, and backing devices. |
| * |
| * Support for multiple cache devices hasn't quite been finished off yet, but |
| * it's about 95% plumbed through. A cache set and its cache devices is sort of |
| * like a md raid array and its component devices. Most of the code doesn't care |
| * about individual cache devices, the main abstraction is the cache set. |
| * |
| * Multiple cache devices is intended to give us the ability to mirror dirty |
| * cached data and metadata, without mirroring clean cached data. |
| * |
| * Backing devices are different, in that they have a lifetime independent of a |
| * cache set. When you register a newly formatted backing device it'll come up |
| * in passthrough mode, and then you can attach and detach a backing device from |
| * a cache set at runtime - while it's mounted and in use. Detaching implicitly |
| * invalidates any cached data for that backing device. |
| * |
| * A cache set can have multiple (many) backing devices attached to it. |
| * |
| * There's also flash only volumes - this is the reason for the distinction |
| * between struct cached_dev and struct bcache_device. A flash only volume |
| * works much like a bcache device that has a backing device, except the |
| * "cached" data is always dirty. The end result is that we get thin |
| * provisioning with very little additional code. |
| * |
| * Flash only volumes work but they're not production ready because the moving |
| * garbage collector needs more work. More on that later. |
| * |
| * BUCKETS/ALLOCATION: |
| * |
| * Bcache is primarily designed for caching, which means that in normal |
| * operation all of our available space will be allocated. Thus, we need an |
| * efficient way of deleting things from the cache so we can write new things to |
| * it. |
| * |
| * To do this, we first divide the cache device up into buckets. A bucket is the |
| * unit of allocation; they're typically around 1 mb - anywhere from 128k to 2M+ |
| * works efficiently. |
| * |
| * Each bucket has a 16 bit priority, and an 8 bit generation associated with |
| * it. The gens and priorities for all the buckets are stored contiguously and |
| * packed on disk (in a linked list of buckets - aside from the superblock, all |
| * of bcache's metadata is stored in buckets). |
| * |
| * The priority is used to implement an LRU. We reset a bucket's priority when |
| * we allocate it or on cache it, and every so often we decrement the priority |
| * of each bucket. It could be used to implement something more sophisticated, |
| * if anyone ever gets around to it. |
| * |
| * The generation is used for invalidating buckets. Each pointer also has an 8 |
| * bit generation embedded in it; for a pointer to be considered valid, its gen |
| * must match the gen of the bucket it points into. Thus, to reuse a bucket all |
| * we have to do is increment its gen (and write its new gen to disk; we batch |
| * this up). |
| * |
| * Bcache is entirely COW - we never write twice to a bucket, even buckets that |
| * contain metadata (including btree nodes). |
| * |
| * THE BTREE: |
| * |
| * Bcache is in large part design around the btree. |
| * |
| * At a high level, the btree is just an index of key -> ptr tuples. |
| * |
| * Keys represent extents, and thus have a size field. Keys also have a variable |
| * number of pointers attached to them (potentially zero, which is handy for |
| * invalidating the cache). |
| * |
| * The key itself is an inode:offset pair. The inode number corresponds to a |
| * backing device or a flash only volume. The offset is the ending offset of the |
| * extent within the inode - not the starting offset; this makes lookups |
| * slightly more convenient. |
| * |
| * Pointers contain the cache device id, the offset on that device, and an 8 bit |
| * generation number. More on the gen later. |
| * |
| * Index lookups are not fully abstracted - cache lookups in particular are |
| * still somewhat mixed in with the btree code, but things are headed in that |
| * direction. |
| * |
| * Updates are fairly well abstracted, though. There are two different ways of |
| * updating the btree; insert and replace. |
| * |
| * BTREE_INSERT will just take a list of keys and insert them into the btree - |
| * overwriting (possibly only partially) any extents they overlap with. This is |
| * used to update the index after a write. |
| * |
| * BTREE_REPLACE is really cmpxchg(); it inserts a key into the btree iff it is |
| * overwriting a key that matches another given key. This is used for inserting |
| * data into the cache after a cache miss, and for background writeback, and for |
| * the moving garbage collector. |
| * |
| * There is no "delete" operation; deleting things from the index is |
| * accomplished by either by invalidating pointers (by incrementing a bucket's |
| * gen) or by inserting a key with 0 pointers - which will overwrite anything |
| * previously present at that location in the index. |
| * |
| * This means that there are always stale/invalid keys in the btree. They're |
| * filtered out by the code that iterates through a btree node, and removed when |
| * a btree node is rewritten. |
| * |
| * BTREE NODES: |
| * |
| * Our unit of allocation is a bucket, and we can't arbitrarily allocate and |
| * free smaller than a bucket - so, that's how big our btree nodes are. |
| * |
| * (If buckets are really big we'll only use part of the bucket for a btree node |
| * - no less than 1/4th - but a bucket still contains no more than a single |
| * btree node. I'd actually like to change this, but for now we rely on the |
| * bucket's gen for deleting btree nodes when we rewrite/split a node.) |
| * |
| * Anyways, btree nodes are big - big enough to be inefficient with a textbook |
| * btree implementation. |
| * |
| * The way this is solved is that btree nodes are internally log structured; we |
| * can append new keys to an existing btree node without rewriting it. This |
| * means each set of keys we write is sorted, but the node is not. |
| * |
| * We maintain this log structure in memory - keeping 1Mb of keys sorted would |
| * be expensive, and we have to distinguish between the keys we have written and |
| * the keys we haven't. So to do a lookup in a btree node, we have to search |
| * each sorted set. But we do merge written sets together lazily, so the cost of |
| * these extra searches is quite low (normally most of the keys in a btree node |
| * will be in one big set, and then there'll be one or two sets that are much |
| * smaller). |
| * |
| * This log structure makes bcache's btree more of a hybrid between a |
| * conventional btree and a compacting data structure, with some of the |
| * advantages of both. |
| * |
| * GARBAGE COLLECTION: |
| * |
| * We can't just invalidate any bucket - it might contain dirty data or |
| * metadata. If it once contained dirty data, other writes might overwrite it |
| * later, leaving no valid pointers into that bucket in the index. |
| * |
| * Thus, the primary purpose of garbage collection is to find buckets to reuse. |
| * It also counts how much valid data it each bucket currently contains, so that |
| * allocation can reuse buckets sooner when they've been mostly overwritten. |
| * |
| * It also does some things that are really internal to the btree |
| * implementation. If a btree node contains pointers that are stale by more than |
| * some threshold, it rewrites the btree node to avoid the bucket's generation |
| * wrapping around. It also merges adjacent btree nodes if they're empty enough. |
| * |
| * THE JOURNAL: |
| * |
| * Bcache's journal is not necessary for consistency; we always strictly |
| * order metadata writes so that the btree and everything else is consistent on |
| * disk in the event of an unclean shutdown, and in fact bcache had writeback |
| * caching (with recovery from unclean shutdown) before journalling was |
| * implemented. |
| * |
| * Rather, the journal is purely a performance optimization; we can't complete a |
| * write until we've updated the index on disk, otherwise the cache would be |
| * inconsistent in the event of an unclean shutdown. This means that without the |
| * journal, on random write workloads we constantly have to update all the leaf |
| * nodes in the btree, and those writes will be mostly empty (appending at most |
| * a few keys each) - highly inefficient in terms of amount of metadata writes, |
| * and it puts more strain on the various btree resorting/compacting code. |
| * |
| * The journal is just a log of keys we've inserted; on startup we just reinsert |
| * all the keys in the open journal entries. That means that when we're updating |
| * a node in the btree, we can wait until a 4k block of keys fills up before |
| * writing them out. |
| * |
| * For simplicity, we only journal updates to leaf nodes; updates to parent |
| * nodes are rare enough (since our leaf nodes are huge) that it wasn't worth |
| * the complexity to deal with journalling them (in particular, journal replay) |
| * - updates to non leaf nodes just happen synchronously (see btree_split()). |
| */ |
| |
| #undef pr_fmt |
| #ifdef __KERNEL__ |
| #define pr_fmt(fmt) "bcachefs: %s() " fmt "\n", __func__ |
| #else |
| #define pr_fmt(fmt) "%s() " fmt "\n", __func__ |
| #endif |
| |
| #include <linux/backing-dev-defs.h> |
| #include <linux/bug.h> |
| #include <linux/bio.h> |
| #include <linux/closure.h> |
| #include <linux/kobject.h> |
| #include <linux/list.h> |
| #include <linux/math64.h> |
| #include <linux/mutex.h> |
| #include <linux/percpu-refcount.h> |
| #include <linux/percpu-rwsem.h> |
| #include <linux/refcount.h> |
| #include <linux/rhashtable.h> |
| #include <linux/rwsem.h> |
| #include <linux/semaphore.h> |
| #include <linux/seqlock.h> |
| #include <linux/shrinker.h> |
| #include <linux/srcu.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| #include <linux/zstd.h> |
| |
| #include "bcachefs_format.h" |
| #include "errcode.h" |
| #include "fifo.h" |
| #include "nocow_locking_types.h" |
| #include "opts.h" |
| #include "recovery_passes_types.h" |
| #include "sb-errors_types.h" |
| #include "seqmutex.h" |
| #include "time_stats.h" |
| #include "util.h" |
| |
| #ifdef CONFIG_BCACHEFS_DEBUG |
| #define BCH_WRITE_REF_DEBUG |
| #endif |
| |
| #ifndef dynamic_fault |
| #define dynamic_fault(...) 0 |
| #endif |
| |
| #define race_fault(...) dynamic_fault("bcachefs:race") |
| |
| #define count_event(_c, _name) this_cpu_inc((_c)->counters[BCH_COUNTER_##_name]) |
| |
| #define trace_and_count(_c, _name, ...) \ |
| do { \ |
| count_event(_c, _name); \ |
| trace_##_name(__VA_ARGS__); \ |
| } while (0) |
| |
| #define bch2_fs_init_fault(name) \ |
| dynamic_fault("bcachefs:bch_fs_init:" name) |
| #define bch2_meta_read_fault(name) \ |
| dynamic_fault("bcachefs:meta:read:" name) |
| #define bch2_meta_write_fault(name) \ |
| dynamic_fault("bcachefs:meta:write:" name) |
| |
| #ifdef __KERNEL__ |
| #define BCACHEFS_LOG_PREFIX |
| #endif |
| |
| #ifdef BCACHEFS_LOG_PREFIX |
| |
| #define bch2_log_msg(_c, fmt) "bcachefs (%s): " fmt, ((_c)->name) |
| #define bch2_fmt_dev(_ca, fmt) "bcachefs (%s): " fmt "\n", ((_ca)->name) |
| #define bch2_fmt_dev_offset(_ca, _offset, fmt) "bcachefs (%s sector %llu): " fmt "\n", ((_ca)->name), (_offset) |
| #define bch2_fmt_inum(_c, _inum, fmt) "bcachefs (%s inum %llu): " fmt "\n", ((_c)->name), (_inum) |
| #define bch2_fmt_inum_offset(_c, _inum, _offset, fmt) \ |
| "bcachefs (%s inum %llu offset %llu): " fmt "\n", ((_c)->name), (_inum), (_offset) |
| |
| #else |
| |
| #define bch2_log_msg(_c, fmt) fmt |
| #define bch2_fmt_dev(_ca, fmt) "%s: " fmt "\n", ((_ca)->name) |
| #define bch2_fmt_dev_offset(_ca, _offset, fmt) "%s sector %llu: " fmt "\n", ((_ca)->name), (_offset) |
| #define bch2_fmt_inum(_c, _inum, fmt) "inum %llu: " fmt "\n", (_inum) |
| #define bch2_fmt_inum_offset(_c, _inum, _offset, fmt) \ |
| "inum %llu offset %llu: " fmt "\n", (_inum), (_offset) |
| |
| #endif |
| |
| #define bch2_fmt(_c, fmt) bch2_log_msg(_c, fmt "\n") |
| |
| __printf(2, 3) |
| void bch2_print_opts(struct bch_opts *, const char *, ...); |
| |
| __printf(2, 3) |
| void __bch2_print(struct bch_fs *c, const char *fmt, ...); |
| |
| #define maybe_dev_to_fs(_c) _Generic((_c), \ |
| struct bch_dev *: ((struct bch_dev *) (_c))->fs, \ |
| struct bch_fs *: (_c)) |
| |
| #define bch2_print(_c, ...) __bch2_print(maybe_dev_to_fs(_c), __VA_ARGS__) |
| |
| #define bch2_print_ratelimited(_c, ...) \ |
| do { \ |
| static DEFINE_RATELIMIT_STATE(_rs, \ |
| DEFAULT_RATELIMIT_INTERVAL, \ |
| DEFAULT_RATELIMIT_BURST); \ |
| \ |
| if (__ratelimit(&_rs)) \ |
| bch2_print(_c, __VA_ARGS__); \ |
| } while (0) |
| |
| #define bch_info(c, fmt, ...) \ |
| bch2_print(c, KERN_INFO bch2_fmt(c, fmt), ##__VA_ARGS__) |
| #define bch_notice(c, fmt, ...) \ |
| bch2_print(c, KERN_NOTICE bch2_fmt(c, fmt), ##__VA_ARGS__) |
| #define bch_warn(c, fmt, ...) \ |
| bch2_print(c, KERN_WARNING bch2_fmt(c, fmt), ##__VA_ARGS__) |
| #define bch_warn_ratelimited(c, fmt, ...) \ |
| bch2_print_ratelimited(c, KERN_WARNING bch2_fmt(c, fmt), ##__VA_ARGS__) |
| |
| #define bch_err(c, fmt, ...) \ |
| bch2_print(c, KERN_ERR bch2_fmt(c, fmt), ##__VA_ARGS__) |
| #define bch_err_dev(ca, fmt, ...) \ |
| bch2_print(c, KERN_ERR bch2_fmt_dev(ca, fmt), ##__VA_ARGS__) |
| #define bch_err_dev_offset(ca, _offset, fmt, ...) \ |
| bch2_print(c, KERN_ERR bch2_fmt_dev_offset(ca, _offset, fmt), ##__VA_ARGS__) |
| #define bch_err_inum(c, _inum, fmt, ...) \ |
| bch2_print(c, KERN_ERR bch2_fmt_inum(c, _inum, fmt), ##__VA_ARGS__) |
| #define bch_err_inum_offset(c, _inum, _offset, fmt, ...) \ |
| bch2_print(c, KERN_ERR bch2_fmt_inum_offset(c, _inum, _offset, fmt), ##__VA_ARGS__) |
| |
| #define bch_err_ratelimited(c, fmt, ...) \ |
| bch2_print_ratelimited(c, KERN_ERR bch2_fmt(c, fmt), ##__VA_ARGS__) |
| #define bch_err_dev_ratelimited(ca, fmt, ...) \ |
| bch2_print_ratelimited(ca, KERN_ERR bch2_fmt_dev(ca, fmt), ##__VA_ARGS__) |
| #define bch_err_dev_offset_ratelimited(ca, _offset, fmt, ...) \ |
| bch2_print_ratelimited(ca, KERN_ERR bch2_fmt_dev_offset(ca, _offset, fmt), ##__VA_ARGS__) |
| #define bch_err_inum_ratelimited(c, _inum, fmt, ...) \ |
| bch2_print_ratelimited(c, KERN_ERR bch2_fmt_inum(c, _inum, fmt), ##__VA_ARGS__) |
| #define bch_err_inum_offset_ratelimited(c, _inum, _offset, fmt, ...) \ |
| bch2_print_ratelimited(c, KERN_ERR bch2_fmt_inum_offset(c, _inum, _offset, fmt), ##__VA_ARGS__) |
| |
| static inline bool should_print_err(int err) |
| { |
| return err && !bch2_err_matches(err, BCH_ERR_transaction_restart); |
| } |
| |
| #define bch_err_fn(_c, _ret) \ |
| do { \ |
| if (should_print_err(_ret)) \ |
| bch_err(_c, "%s(): error %s", __func__, bch2_err_str(_ret));\ |
| } while (0) |
| |
| #define bch_err_fn_ratelimited(_c, _ret) \ |
| do { \ |
| if (should_print_err(_ret)) \ |
| bch_err_ratelimited(_c, "%s(): error %s", __func__, bch2_err_str(_ret));\ |
| } while (0) |
| |
| #define bch_err_msg(_c, _ret, _msg, ...) \ |
| do { \ |
| if (should_print_err(_ret)) \ |
| bch_err(_c, "%s(): error " _msg " %s", __func__, \ |
| ##__VA_ARGS__, bch2_err_str(_ret)); \ |
| } while (0) |
| |
| #define bch_verbose(c, fmt, ...) \ |
| do { \ |
| if ((c)->opts.verbose) \ |
| bch_info(c, fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| #define pr_verbose_init(opts, fmt, ...) \ |
| do { \ |
| if (opt_get(opts, verbose)) \ |
| pr_info(fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| /* Parameters that are useful for debugging, but should always be compiled in: */ |
| #define BCH_DEBUG_PARAMS_ALWAYS() \ |
| BCH_DEBUG_PARAM(key_merging_disabled, \ |
| "Disables merging of extents") \ |
| BCH_DEBUG_PARAM(btree_gc_always_rewrite, \ |
| "Causes mark and sweep to compact and rewrite every " \ |
| "btree node it traverses") \ |
| BCH_DEBUG_PARAM(btree_gc_rewrite_disabled, \ |
| "Disables rewriting of btree nodes during mark and sweep")\ |
| BCH_DEBUG_PARAM(btree_shrinker_disabled, \ |
| "Disables the shrinker callback for the btree node cache")\ |
| BCH_DEBUG_PARAM(verify_btree_ondisk, \ |
| "Reread btree nodes at various points to verify the " \ |
| "mergesort in the read path against modifications " \ |
| "done in memory") \ |
| BCH_DEBUG_PARAM(verify_all_btree_replicas, \ |
| "When reading btree nodes, read all replicas and " \ |
| "compare them") \ |
| BCH_DEBUG_PARAM(backpointers_no_use_write_buffer, \ |
| "Don't use the write buffer for backpointers, enabling "\ |
| "extra runtime checks") |
| |
| /* Parameters that should only be compiled in debug mode: */ |
| #define BCH_DEBUG_PARAMS_DEBUG() \ |
| BCH_DEBUG_PARAM(expensive_debug_checks, \ |
| "Enables various runtime debugging checks that " \ |
| "significantly affect performance") \ |
| BCH_DEBUG_PARAM(debug_check_iterators, \ |
| "Enables extra verification for btree iterators") \ |
| BCH_DEBUG_PARAM(debug_check_btree_accounting, \ |
| "Verify btree accounting for keys within a node") \ |
| BCH_DEBUG_PARAM(journal_seq_verify, \ |
| "Store the journal sequence number in the version " \ |
| "number of every btree key, and verify that btree " \ |
| "update ordering is preserved during recovery") \ |
| BCH_DEBUG_PARAM(inject_invalid_keys, \ |
| "Store the journal sequence number in the version " \ |
| "number of every btree key, and verify that btree " \ |
| "update ordering is preserved during recovery") \ |
| BCH_DEBUG_PARAM(test_alloc_startup, \ |
| "Force allocator startup to use the slowpath where it" \ |
| "can't find enough free buckets without invalidating" \ |
| "cached data") \ |
| BCH_DEBUG_PARAM(force_reconstruct_read, \ |
| "Force reads to use the reconstruct path, when reading" \ |
| "from erasure coded extents") \ |
| BCH_DEBUG_PARAM(test_restart_gc, \ |
| "Test restarting mark and sweep gc when bucket gens change") |
| |
| #define BCH_DEBUG_PARAMS_ALL() BCH_DEBUG_PARAMS_ALWAYS() BCH_DEBUG_PARAMS_DEBUG() |
| |
| #ifdef CONFIG_BCACHEFS_DEBUG |
| #define BCH_DEBUG_PARAMS() BCH_DEBUG_PARAMS_ALL() |
| #else |
| #define BCH_DEBUG_PARAMS() BCH_DEBUG_PARAMS_ALWAYS() |
| #endif |
| |
| #define BCH_DEBUG_PARAM(name, description) extern bool bch2_##name; |
| BCH_DEBUG_PARAMS() |
| #undef BCH_DEBUG_PARAM |
| |
| #ifndef CONFIG_BCACHEFS_DEBUG |
| #define BCH_DEBUG_PARAM(name, description) static const __maybe_unused bool bch2_##name; |
| BCH_DEBUG_PARAMS_DEBUG() |
| #undef BCH_DEBUG_PARAM |
| #endif |
| |
| #define BCH_TIME_STATS() \ |
| x(btree_node_mem_alloc) \ |
| x(btree_node_split) \ |
| x(btree_node_compact) \ |
| x(btree_node_merge) \ |
| x(btree_node_sort) \ |
| x(btree_node_read) \ |
| x(btree_node_read_done) \ |
| x(btree_interior_update_foreground) \ |
| x(btree_interior_update_total) \ |
| x(btree_gc) \ |
| x(data_write) \ |
| x(data_read) \ |
| x(data_promote) \ |
| x(journal_flush_write) \ |
| x(journal_noflush_write) \ |
| x(journal_flush_seq) \ |
| x(blocked_journal_low_on_space) \ |
| x(blocked_journal_low_on_pin) \ |
| x(blocked_journal_max_in_flight) \ |
| x(blocked_allocate) \ |
| x(blocked_allocate_open_bucket) \ |
| x(blocked_write_buffer_full) \ |
| x(nocow_lock_contended) |
| |
| enum bch_time_stats { |
| #define x(name) BCH_TIME_##name, |
| BCH_TIME_STATS() |
| #undef x |
| BCH_TIME_STAT_NR |
| }; |
| |
| #include "alloc_types.h" |
| #include "btree_types.h" |
| #include "btree_node_scan_types.h" |
| #include "btree_write_buffer_types.h" |
| #include "buckets_types.h" |
| #include "buckets_waiting_for_journal_types.h" |
| #include "clock_types.h" |
| #include "disk_groups_types.h" |
| #include "ec_types.h" |
| #include "journal_types.h" |
| #include "keylist_types.h" |
| #include "quota_types.h" |
| #include "rebalance_types.h" |
| #include "replicas_types.h" |
| #include "subvolume_types.h" |
| #include "super_types.h" |
| #include "thread_with_file_types.h" |
| |
| /* Number of nodes btree coalesce will try to coalesce at once */ |
| #define GC_MERGE_NODES 4U |
| |
| /* Maximum number of nodes we might need to allocate atomically: */ |
| #define BTREE_RESERVE_MAX (BTREE_MAX_DEPTH + (BTREE_MAX_DEPTH - 1)) |
| |
| /* Size of the freelist we allocate btree nodes from: */ |
| #define BTREE_NODE_RESERVE (BTREE_RESERVE_MAX * 4) |
| |
| #define BTREE_NODE_OPEN_BUCKET_RESERVE (BTREE_RESERVE_MAX * BCH_REPLICAS_MAX) |
| |
| struct btree; |
| |
| enum gc_phase { |
| GC_PHASE_NOT_RUNNING, |
| GC_PHASE_START, |
| GC_PHASE_SB, |
| |
| GC_PHASE_BTREE_stripes, |
| GC_PHASE_BTREE_extents, |
| GC_PHASE_BTREE_inodes, |
| GC_PHASE_BTREE_dirents, |
| GC_PHASE_BTREE_xattrs, |
| GC_PHASE_BTREE_alloc, |
| GC_PHASE_BTREE_quotas, |
| GC_PHASE_BTREE_reflink, |
| GC_PHASE_BTREE_subvolumes, |
| GC_PHASE_BTREE_snapshots, |
| GC_PHASE_BTREE_lru, |
| GC_PHASE_BTREE_freespace, |
| GC_PHASE_BTREE_need_discard, |
| GC_PHASE_BTREE_backpointers, |
| GC_PHASE_BTREE_bucket_gens, |
| GC_PHASE_BTREE_snapshot_trees, |
| GC_PHASE_BTREE_deleted_inodes, |
| GC_PHASE_BTREE_logged_ops, |
| GC_PHASE_BTREE_rebalance_work, |
| GC_PHASE_BTREE_subvolume_children, |
| |
| GC_PHASE_PENDING_DELETE, |
| }; |
| |
| struct gc_pos { |
| enum gc_phase phase; |
| struct bpos pos; |
| unsigned level; |
| }; |
| |
| struct reflink_gc { |
| u64 offset; |
| u32 size; |
| u32 refcount; |
| }; |
| |
| typedef GENRADIX(struct reflink_gc) reflink_gc_table; |
| |
| struct io_count { |
| u64 sectors[2][BCH_DATA_NR]; |
| }; |
| |
| struct bch_dev { |
| struct kobject kobj; |
| struct percpu_ref ref; |
| struct completion ref_completion; |
| struct percpu_ref io_ref; |
| struct completion io_ref_completion; |
| |
| struct bch_fs *fs; |
| |
| u8 dev_idx; |
| /* |
| * Cached version of this device's member info from superblock |
| * Committed by bch2_write_super() -> bch_fs_mi_update() |
| */ |
| struct bch_member_cpu mi; |
| atomic64_t errors[BCH_MEMBER_ERROR_NR]; |
| |
| __uuid_t uuid; |
| char name[BDEVNAME_SIZE]; |
| |
| struct bch_sb_handle disk_sb; |
| struct bch_sb *sb_read_scratch; |
| int sb_write_error; |
| dev_t dev; |
| atomic_t flush_seq; |
| |
| struct bch_devs_mask self; |
| |
| /* biosets used in cloned bios for writing multiple replicas */ |
| struct bio_set replica_set; |
| |
| /* |
| * Buckets: |
| * Per-bucket arrays are protected by c->mark_lock, bucket_lock and |
| * gc_lock, for device resize - holding any is sufficient for access: |
| * Or rcu_read_lock(), but only for ptr_stale(): |
| */ |
| struct bucket_array __rcu *buckets_gc; |
| struct bucket_gens __rcu *bucket_gens; |
| u8 *oldest_gen; |
| unsigned long *buckets_nouse; |
| struct rw_semaphore bucket_lock; |
| |
| struct bch_dev_usage *usage_base; |
| struct bch_dev_usage __percpu *usage[JOURNAL_BUF_NR]; |
| struct bch_dev_usage __percpu *usage_gc; |
| |
| /* Allocator: */ |
| u64 new_fs_bucket_idx; |
| u64 alloc_cursor; |
| |
| unsigned nr_open_buckets; |
| unsigned nr_btree_reserve; |
| |
| size_t inc_gen_needs_gc; |
| size_t inc_gen_really_needs_gc; |
| size_t buckets_waiting_on_journal; |
| |
| atomic64_t rebalance_work; |
| |
| struct journal_device journal; |
| u64 prev_journal_sector; |
| |
| struct work_struct io_error_work; |
| |
| /* The rest of this all shows up in sysfs */ |
| atomic64_t cur_latency[2]; |
| struct bch2_time_stats_quantiles io_latency[2]; |
| |
| #define CONGESTED_MAX 1024 |
| atomic_t congested; |
| u64 congested_last; |
| |
| struct io_count __percpu *io_done; |
| }; |
| |
| /* |
| * initial_gc_unfixed |
| * error |
| * topology error |
| */ |
| |
| #define BCH_FS_FLAGS() \ |
| x(new_fs) \ |
| x(started) \ |
| x(may_go_rw) \ |
| x(rw) \ |
| x(was_rw) \ |
| x(stopping) \ |
| x(emergency_ro) \ |
| x(going_ro) \ |
| x(write_disable_complete) \ |
| x(clean_shutdown) \ |
| x(fsck_running) \ |
| x(initial_gc_unfixed) \ |
| x(need_another_gc) \ |
| x(need_delete_dead_snapshots) \ |
| x(error) \ |
| x(topology_error) \ |
| x(errors_fixed) \ |
| x(errors_not_fixed) |
| |
| enum bch_fs_flags { |
| #define x(n) BCH_FS_##n, |
| BCH_FS_FLAGS() |
| #undef x |
| }; |
| |
| struct btree_debug { |
| unsigned id; |
| }; |
| |
| #define BCH_TRANSACTIONS_NR 128 |
| |
| struct btree_transaction_stats { |
| struct bch2_time_stats duration; |
| struct bch2_time_stats lock_hold_times; |
| struct mutex lock; |
| unsigned nr_max_paths; |
| unsigned journal_entries_size; |
| unsigned max_mem; |
| char *max_paths_text; |
| }; |
| |
| struct bch_fs_pcpu { |
| u64 sectors_available; |
| }; |
| |
| struct journal_seq_blacklist_table { |
| size_t nr; |
| struct journal_seq_blacklist_table_entry { |
| u64 start; |
| u64 end; |
| bool dirty; |
| } entries[]; |
| }; |
| |
| struct journal_keys { |
| /* must match layout in darray_types.h */ |
| size_t nr, size; |
| struct journal_key { |
| u64 journal_seq; |
| u32 journal_offset; |
| enum btree_id btree_id:8; |
| unsigned level:8; |
| bool allocated; |
| bool overwritten; |
| struct bkey_i *k; |
| } *data; |
| /* |
| * Gap buffer: instead of all the empty space in the array being at the |
| * end of the buffer - from @nr to @size - the empty space is at @gap. |
| * This means that sequential insertions are O(n) instead of O(n^2). |
| */ |
| size_t gap; |
| atomic_t ref; |
| bool initial_ref_held; |
| }; |
| |
| struct btree_trans_buf { |
| struct btree_trans *trans; |
| }; |
| |
| #define REPLICAS_DELTA_LIST_MAX (1U << 16) |
| |
| #define BCACHEFS_ROOT_SUBVOL_INUM \ |
| ((subvol_inum) { BCACHEFS_ROOT_SUBVOL, BCACHEFS_ROOT_INO }) |
| |
| #define BCH_WRITE_REFS() \ |
| x(trans) \ |
| x(write) \ |
| x(promote) \ |
| x(node_rewrite) \ |
| x(stripe_create) \ |
| x(stripe_delete) \ |
| x(reflink) \ |
| x(fallocate) \ |
| x(discard) \ |
| x(discard_fast) \ |
| x(invalidate) \ |
| x(delete_dead_snapshots) \ |
| x(snapshot_delete_pagecache) \ |
| x(sysfs) \ |
| x(btree_write_buffer) |
| |
| enum bch_write_ref { |
| #define x(n) BCH_WRITE_REF_##n, |
| BCH_WRITE_REFS() |
| #undef x |
| BCH_WRITE_REF_NR, |
| }; |
| |
| struct bch_fs { |
| struct closure cl; |
| |
| struct list_head list; |
| struct kobject kobj; |
| struct kobject counters_kobj; |
| struct kobject internal; |
| struct kobject opts_dir; |
| struct kobject time_stats; |
| unsigned long flags; |
| |
| int minor; |
| struct device *chardev; |
| struct super_block *vfs_sb; |
| dev_t dev; |
| char name[40]; |
| struct stdio_redirect *stdio; |
| struct task_struct *stdio_filter; |
| |
| /* ro/rw, add/remove/resize devices: */ |
| struct rw_semaphore state_lock; |
| |
| /* Counts outstanding writes, for clean transition to read-only */ |
| #ifdef BCH_WRITE_REF_DEBUG |
| atomic_long_t writes[BCH_WRITE_REF_NR]; |
| #else |
| struct percpu_ref writes; |
| #endif |
| /* |
| * Analagous to c->writes, for asynchronous ops that don't necessarily |
| * need fs to be read-write |
| */ |
| refcount_t ro_ref; |
| wait_queue_head_t ro_ref_wait; |
| |
| struct work_struct read_only_work; |
| |
| struct bch_dev __rcu *devs[BCH_SB_MEMBERS_MAX]; |
| |
| struct bch_replicas_cpu replicas; |
| struct bch_replicas_cpu replicas_gc; |
| struct mutex replicas_gc_lock; |
| mempool_t replicas_delta_pool; |
| |
| struct journal_entry_res btree_root_journal_res; |
| struct journal_entry_res replicas_journal_res; |
| struct journal_entry_res clock_journal_res; |
| struct journal_entry_res dev_usage_journal_res; |
| |
| struct bch_disk_groups_cpu __rcu *disk_groups; |
| |
| struct bch_opts opts; |
| |
| /* Updated by bch2_sb_update():*/ |
| struct { |
| __uuid_t uuid; |
| __uuid_t user_uuid; |
| |
| u16 version; |
| u16 version_min; |
| u16 version_upgrade_complete; |
| |
| u8 nr_devices; |
| u8 clean; |
| |
| u8 encryption_type; |
| |
| u64 time_base_lo; |
| u32 time_base_hi; |
| unsigned time_units_per_sec; |
| unsigned nsec_per_time_unit; |
| u64 features; |
| u64 compat; |
| unsigned long errors_silent[BITS_TO_LONGS(BCH_SB_ERR_MAX)]; |
| u64 btrees_lost_data; |
| } sb; |
| |
| |
| struct bch_sb_handle disk_sb; |
| |
| unsigned short block_bits; /* ilog2(block_size) */ |
| |
| u16 btree_foreground_merge_threshold; |
| |
| struct closure sb_write; |
| struct mutex sb_lock; |
| |
| /* snapshot.c: */ |
| struct snapshot_table __rcu *snapshots; |
| struct mutex snapshot_table_lock; |
| struct rw_semaphore snapshot_create_lock; |
| |
| struct work_struct snapshot_delete_work; |
| struct work_struct snapshot_wait_for_pagecache_and_delete_work; |
| snapshot_id_list snapshots_unlinked; |
| struct mutex snapshots_unlinked_lock; |
| |
| /* BTREE CACHE */ |
| struct bio_set btree_bio; |
| struct workqueue_struct *io_complete_wq; |
| |
| struct btree_root btree_roots_known[BTREE_ID_NR]; |
| DARRAY(struct btree_root) btree_roots_extra; |
| struct mutex btree_root_lock; |
| |
| struct btree_cache btree_cache; |
| |
| /* |
| * Cache of allocated btree nodes - if we allocate a btree node and |
| * don't use it, if we free it that space can't be reused until going |
| * _all_ the way through the allocator (which exposes us to a livelock |
| * when allocating btree reserves fail halfway through) - instead, we |
| * can stick them here: |
| */ |
| struct btree_alloc btree_reserve_cache[BTREE_NODE_RESERVE * 2]; |
| unsigned btree_reserve_cache_nr; |
| struct mutex btree_reserve_cache_lock; |
| |
| mempool_t btree_interior_update_pool; |
| struct list_head btree_interior_update_list; |
| struct list_head btree_interior_updates_unwritten; |
| struct mutex btree_interior_update_lock; |
| struct closure_waitlist btree_interior_update_wait; |
| |
| struct workqueue_struct *btree_interior_update_worker; |
| struct work_struct btree_interior_update_work; |
| |
| struct workqueue_struct *btree_node_rewrite_worker; |
| |
| struct list_head pending_node_rewrites; |
| struct mutex pending_node_rewrites_lock; |
| |
| /* btree_io.c: */ |
| spinlock_t btree_write_error_lock; |
| struct btree_write_stats { |
| atomic64_t nr; |
| atomic64_t bytes; |
| } btree_write_stats[BTREE_WRITE_TYPE_NR]; |
| |
| /* btree_iter.c: */ |
| struct seqmutex btree_trans_lock; |
| struct list_head btree_trans_list; |
| mempool_t btree_trans_pool; |
| mempool_t btree_trans_mem_pool; |
| struct btree_trans_buf __percpu *btree_trans_bufs; |
| |
| struct srcu_struct btree_trans_barrier; |
| bool btree_trans_barrier_initialized; |
| |
| struct btree_key_cache btree_key_cache; |
| unsigned btree_key_cache_btrees; |
| |
| struct btree_write_buffer btree_write_buffer; |
| |
| struct workqueue_struct *btree_update_wq; |
| struct workqueue_struct *btree_io_complete_wq; |
| /* copygc needs its own workqueue for index updates.. */ |
| struct workqueue_struct *copygc_wq; |
| /* |
| * Use a dedicated wq for write ref holder tasks. Required to avoid |
| * dependency problems with other wq tasks that can block on ref |
| * draining, such as read-only transition. |
| */ |
| struct workqueue_struct *write_ref_wq; |
| |
| /* ALLOCATION */ |
| struct bch_devs_mask rw_devs[BCH_DATA_NR]; |
| |
| u64 capacity; /* sectors */ |
| |
| /* |
| * When capacity _decreases_ (due to a disk being removed), we |
| * increment capacity_gen - this invalidates outstanding reservations |
| * and forces them to be revalidated |
| */ |
| u32 capacity_gen; |
| unsigned bucket_size_max; |
| |
| atomic64_t sectors_available; |
| struct mutex sectors_available_lock; |
| |
| struct bch_fs_pcpu __percpu *pcpu; |
| |
| struct percpu_rw_semaphore mark_lock; |
| |
| seqcount_t usage_lock; |
| struct bch_fs_usage *usage_base; |
| struct bch_fs_usage __percpu *usage[JOURNAL_BUF_NR]; |
| struct bch_fs_usage __percpu *usage_gc; |
| u64 __percpu *online_reserved; |
| |
| /* single element mempool: */ |
| struct mutex usage_scratch_lock; |
| struct bch_fs_usage_online *usage_scratch; |
| |
| struct io_clock io_clock[2]; |
| |
| /* JOURNAL SEQ BLACKLIST */ |
| struct journal_seq_blacklist_table * |
| journal_seq_blacklist_table; |
| struct work_struct journal_seq_blacklist_gc_work; |
| |
| /* ALLOCATOR */ |
| spinlock_t freelist_lock; |
| struct closure_waitlist freelist_wait; |
| |
| open_bucket_idx_t open_buckets_freelist; |
| open_bucket_idx_t open_buckets_nr_free; |
| struct closure_waitlist open_buckets_wait; |
| struct open_bucket open_buckets[OPEN_BUCKETS_COUNT]; |
| open_bucket_idx_t open_buckets_hash[OPEN_BUCKETS_COUNT]; |
| |
| open_bucket_idx_t open_buckets_partial[OPEN_BUCKETS_COUNT]; |
| open_bucket_idx_t open_buckets_partial_nr; |
| |
| struct write_point btree_write_point; |
| struct write_point rebalance_write_point; |
| |
| struct write_point write_points[WRITE_POINT_MAX]; |
| struct hlist_head write_points_hash[WRITE_POINT_HASH_NR]; |
| struct mutex write_points_hash_lock; |
| unsigned write_points_nr; |
| |
| struct buckets_waiting_for_journal buckets_waiting_for_journal; |
| struct work_struct invalidate_work; |
| struct work_struct discard_work; |
| struct mutex discard_buckets_in_flight_lock; |
| DARRAY(struct bpos) discard_buckets_in_flight; |
| struct work_struct discard_fast_work; |
| |
| /* GARBAGE COLLECTION */ |
| struct task_struct *gc_thread; |
| atomic_t kick_gc; |
| unsigned long gc_count; |
| |
| enum btree_id gc_gens_btree; |
| struct bpos gc_gens_pos; |
| |
| /* |
| * Tracks GC's progress - everything in the range [ZERO_KEY..gc_cur_pos] |
| * has been marked by GC. |
| * |
| * gc_cur_phase is a superset of btree_ids (BTREE_ID_extents etc.) |
| * |
| * Protected by gc_pos_lock. Only written to by GC thread, so GC thread |
| * can read without a lock. |
| */ |
| seqcount_t gc_pos_lock; |
| struct gc_pos gc_pos; |
| |
| /* |
| * The allocation code needs gc_mark in struct bucket to be correct, but |
| * it's not while a gc is in progress. |
| */ |
| struct rw_semaphore gc_lock; |
| struct mutex gc_gens_lock; |
| |
| /* IO PATH */ |
| struct semaphore io_in_flight; |
| struct bio_set bio_read; |
| struct bio_set bio_read_split; |
| struct bio_set bio_write; |
| struct mutex bio_bounce_pages_lock; |
| mempool_t bio_bounce_pages; |
| struct bucket_nocow_lock_table |
| nocow_locks; |
| struct rhashtable promote_table; |
| |
| mempool_t compression_bounce[2]; |
| mempool_t compress_workspace[BCH_COMPRESSION_TYPE_NR]; |
| mempool_t decompress_workspace; |
| size_t zstd_workspace_size; |
| |
| struct crypto_shash *sha256; |
| struct crypto_sync_skcipher *chacha20; |
| struct crypto_shash *poly1305; |
| |
| atomic64_t key_version; |
| |
| mempool_t large_bkey_pool; |
| |
| /* MOVE.C */ |
| struct list_head moving_context_list; |
| struct mutex moving_context_lock; |
| |
| /* REBALANCE */ |
| struct bch_fs_rebalance rebalance; |
| |
| /* COPYGC */ |
| struct task_struct *copygc_thread; |
| struct write_point copygc_write_point; |
| s64 copygc_wait_at; |
| s64 copygc_wait; |
| bool copygc_running; |
| wait_queue_head_t copygc_running_wq; |
| |
| /* STRIPES: */ |
| GENRADIX(struct stripe) stripes; |
| GENRADIX(struct gc_stripe) gc_stripes; |
| |
| struct hlist_head ec_stripes_new[32]; |
| spinlock_t ec_stripes_new_lock; |
| |
| ec_stripes_heap ec_stripes_heap; |
| struct mutex ec_stripes_heap_lock; |
| |
| /* ERASURE CODING */ |
| struct list_head ec_stripe_head_list; |
| struct mutex ec_stripe_head_lock; |
| |
| struct list_head ec_stripe_new_list; |
| struct mutex ec_stripe_new_lock; |
| wait_queue_head_t ec_stripe_new_wait; |
| |
| struct work_struct ec_stripe_create_work; |
| u64 ec_stripe_hint; |
| |
| struct work_struct ec_stripe_delete_work; |
| |
| struct bio_set ec_bioset; |
| |
| /* REFLINK */ |
| reflink_gc_table reflink_gc_table; |
| size_t reflink_gc_nr; |
| |
| /* fs.c */ |
| struct list_head vfs_inodes_list; |
| struct mutex vfs_inodes_lock; |
| |
| /* VFS IO PATH - fs-io.c */ |
| struct bio_set writepage_bioset; |
| struct bio_set dio_write_bioset; |
| struct bio_set dio_read_bioset; |
| struct bio_set nocow_flush_bioset; |
| |
| /* QUOTAS */ |
| struct bch_memquota_type quotas[QTYP_NR]; |
| |
| /* RECOVERY */ |
| u64 journal_replay_seq_start; |
| u64 journal_replay_seq_end; |
| /* |
| * Two different uses: |
| * "Has this fsck pass?" - i.e. should this type of error be an |
| * emergency read-only |
| * And, in certain situations fsck will rewind to an earlier pass: used |
| * for signaling to the toplevel code which pass we want to run now. |
| */ |
| enum bch_recovery_pass curr_recovery_pass; |
| /* bitmap of explicitly enabled recovery passes: */ |
| u64 recovery_passes_explicit; |
| /* bitmask of recovery passes that we actually ran */ |
| u64 recovery_passes_complete; |
| /* never rewinds version of curr_recovery_pass */ |
| enum bch_recovery_pass recovery_pass_done; |
| struct semaphore online_fsck_mutex; |
| |
| /* DEBUG JUNK */ |
| struct dentry *fs_debug_dir; |
| struct dentry *btree_debug_dir; |
| struct btree_debug btree_debug[BTREE_ID_NR]; |
| struct btree *verify_data; |
| struct btree_node *verify_ondisk; |
| struct mutex verify_lock; |
| |
| u64 *unused_inode_hints; |
| unsigned inode_shard_bits; |
| |
| /* |
| * A btree node on disk could have too many bsets for an iterator to fit |
| * on the stack - have to dynamically allocate them |
| */ |
| mempool_t fill_iter; |
| |
| mempool_t btree_bounce_pool; |
| |
| struct journal journal; |
| GENRADIX(struct journal_replay *) journal_entries; |
| u64 journal_entries_base_seq; |
| struct journal_keys journal_keys; |
| struct list_head journal_iters; |
| |
| struct find_btree_nodes found_btree_nodes; |
| |
| u64 last_bucket_seq_cleanup; |
| |
| u64 counters_on_mount[BCH_COUNTER_NR]; |
| u64 __percpu *counters; |
| |
| unsigned btree_gc_periodic:1; |
| unsigned copy_gc_enabled:1; |
| bool promote_whole_extents; |
| |
| struct bch2_time_stats times[BCH_TIME_STAT_NR]; |
| |
| struct btree_transaction_stats btree_transaction_stats[BCH_TRANSACTIONS_NR]; |
| |
| /* ERRORS */ |
| struct list_head fsck_error_msgs; |
| struct mutex fsck_error_msgs_lock; |
| bool fsck_alloc_msgs_err; |
| |
| bch_sb_errors_cpu fsck_error_counts; |
| struct mutex fsck_error_counts_lock; |
| }; |
| |
| extern struct wait_queue_head bch2_read_only_wait; |
| |
| static inline void bch2_write_ref_get(struct bch_fs *c, enum bch_write_ref ref) |
| { |
| #ifdef BCH_WRITE_REF_DEBUG |
| atomic_long_inc(&c->writes[ref]); |
| #else |
| percpu_ref_get(&c->writes); |
| #endif |
| } |
| |
| static inline bool __bch2_write_ref_tryget(struct bch_fs *c, enum bch_write_ref ref) |
| { |
| #ifdef BCH_WRITE_REF_DEBUG |
| return !test_bit(BCH_FS_going_ro, &c->flags) && |
| atomic_long_inc_not_zero(&c->writes[ref]); |
| #else |
| return percpu_ref_tryget(&c->writes); |
| #endif |
| } |
| |
| static inline bool bch2_write_ref_tryget(struct bch_fs *c, enum bch_write_ref ref) |
| { |
| #ifdef BCH_WRITE_REF_DEBUG |
| return !test_bit(BCH_FS_going_ro, &c->flags) && |
| atomic_long_inc_not_zero(&c->writes[ref]); |
| #else |
| return percpu_ref_tryget_live(&c->writes); |
| #endif |
| } |
| |
| static inline void bch2_write_ref_put(struct bch_fs *c, enum bch_write_ref ref) |
| { |
| #ifdef BCH_WRITE_REF_DEBUG |
| long v = atomic_long_dec_return(&c->writes[ref]); |
| |
| BUG_ON(v < 0); |
| if (v) |
| return; |
| for (unsigned i = 0; i < BCH_WRITE_REF_NR; i++) |
| if (atomic_long_read(&c->writes[i])) |
| return; |
| |
| set_bit(BCH_FS_write_disable_complete, &c->flags); |
| wake_up(&bch2_read_only_wait); |
| #else |
| percpu_ref_put(&c->writes); |
| #endif |
| } |
| |
| static inline bool bch2_ro_ref_tryget(struct bch_fs *c) |
| { |
| if (test_bit(BCH_FS_stopping, &c->flags)) |
| return false; |
| |
| return refcount_inc_not_zero(&c->ro_ref); |
| } |
| |
| static inline void bch2_ro_ref_put(struct bch_fs *c) |
| { |
| if (refcount_dec_and_test(&c->ro_ref)) |
| wake_up(&c->ro_ref_wait); |
| } |
| |
| static inline void bch2_set_ra_pages(struct bch_fs *c, unsigned ra_pages) |
| { |
| #ifndef NO_BCACHEFS_FS |
| if (c->vfs_sb) |
| c->vfs_sb->s_bdi->ra_pages = ra_pages; |
| #endif |
| } |
| |
| static inline unsigned bucket_bytes(const struct bch_dev *ca) |
| { |
| return ca->mi.bucket_size << 9; |
| } |
| |
| static inline unsigned block_bytes(const struct bch_fs *c) |
| { |
| return c->opts.block_size; |
| } |
| |
| static inline unsigned block_sectors(const struct bch_fs *c) |
| { |
| return c->opts.block_size >> 9; |
| } |
| |
| static inline bool btree_id_cached(const struct bch_fs *c, enum btree_id btree) |
| { |
| return c->btree_key_cache_btrees & (1U << btree); |
| } |
| |
| static inline struct timespec64 bch2_time_to_timespec(const struct bch_fs *c, s64 time) |
| { |
| struct timespec64 t; |
| s32 rem; |
| |
| time += c->sb.time_base_lo; |
| |
| t.tv_sec = div_s64_rem(time, c->sb.time_units_per_sec, &rem); |
| t.tv_nsec = rem * c->sb.nsec_per_time_unit; |
| return t; |
| } |
| |
| static inline s64 timespec_to_bch2_time(const struct bch_fs *c, struct timespec64 ts) |
| { |
| return (ts.tv_sec * c->sb.time_units_per_sec + |
| (int) ts.tv_nsec / c->sb.nsec_per_time_unit) - c->sb.time_base_lo; |
| } |
| |
| static inline s64 bch2_current_time(const struct bch_fs *c) |
| { |
| struct timespec64 now; |
| |
| ktime_get_coarse_real_ts64(&now); |
| return timespec_to_bch2_time(c, now); |
| } |
| |
| static inline bool bch2_dev_exists2(const struct bch_fs *c, unsigned dev) |
| { |
| return dev < c->sb.nr_devices && c->devs[dev]; |
| } |
| |
| static inline struct stdio_redirect *bch2_fs_stdio_redirect(struct bch_fs *c) |
| { |
| struct stdio_redirect *stdio = c->stdio; |
| |
| if (c->stdio_filter && c->stdio_filter != current) |
| stdio = NULL; |
| return stdio; |
| } |
| |
| static inline unsigned metadata_replicas_required(struct bch_fs *c) |
| { |
| return min(c->opts.metadata_replicas, |
| c->opts.metadata_replicas_required); |
| } |
| |
| static inline unsigned data_replicas_required(struct bch_fs *c) |
| { |
| return min(c->opts.data_replicas, |
| c->opts.data_replicas_required); |
| } |
| |
| #define BKEY_PADDED_ONSTACK(key, pad) \ |
| struct { struct bkey_i key; __u64 key ## _pad[pad]; } |
| |
| #endif /* _BCACHEFS_H */ |