| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * R-Car Gen1 RESET/WDT, R-Car Gen2, Gen3, and RZ/G RST Driver |
| * |
| * Copyright (C) 2016 Glider bvba |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| #include <linux/soc/renesas/rcar-rst.h> |
| |
| #define WDTRSTCR_RESET 0xA55A0002 |
| #define WDTRSTCR 0x0054 |
| #define GEN4_WDTRSTCR 0x0010 |
| |
| #define CR7BAR 0x0070 |
| #define CR7BAREN BIT(4) |
| #define CR7BAR_MASK 0xFFFC0000 |
| |
| static void __iomem *rcar_rst_base; |
| static u32 saved_mode __initdata; |
| static int (*rcar_rst_set_rproc_boot_addr_func)(u64 boot_addr); |
| |
| static int rcar_rst_enable_wdt_reset(void __iomem *base) |
| { |
| iowrite32(WDTRSTCR_RESET, base + WDTRSTCR); |
| return 0; |
| } |
| |
| static int rcar_rst_v3u_enable_wdt_reset(void __iomem *base) |
| { |
| iowrite32(WDTRSTCR_RESET, base + GEN4_WDTRSTCR); |
| return 0; |
| } |
| |
| /* |
| * Most of the R-Car Gen3 SoCs have an ARM Realtime Core. |
| * Firmware boot address has to be set in CR7BAR before |
| * starting the realtime core. |
| * Boot address must be aligned on a 256k boundary. |
| */ |
| static int rcar_rst_set_gen3_rproc_boot_addr(u64 boot_addr) |
| { |
| if (boot_addr & ~(u64)CR7BAR_MASK) { |
| pr_err("Invalid boot address got %llx\n", boot_addr); |
| return -EINVAL; |
| } |
| |
| iowrite32(boot_addr, rcar_rst_base + CR7BAR); |
| iowrite32(boot_addr | CR7BAREN, rcar_rst_base + CR7BAR); |
| |
| return 0; |
| } |
| |
| struct rst_config { |
| unsigned int modemr; /* Mode Monitoring Register Offset */ |
| int (*configure)(void __iomem *base); /* Platform specific config */ |
| int (*set_rproc_boot_addr)(u64 boot_addr); |
| }; |
| |
| static const struct rst_config rcar_rst_gen1 __initconst = { |
| .modemr = 0x20, |
| }; |
| |
| static const struct rst_config rcar_rst_gen2 __initconst = { |
| .modemr = 0x60, |
| .configure = rcar_rst_enable_wdt_reset, |
| }; |
| |
| static const struct rst_config rcar_rst_gen3 __initconst = { |
| .modemr = 0x60, |
| .set_rproc_boot_addr = rcar_rst_set_gen3_rproc_boot_addr, |
| }; |
| |
| /* V3U firmware doesn't enable WDT reset and there won't be updates anymore */ |
| static const struct rst_config rcar_rst_v3u __initconst = { |
| .modemr = 0x00, /* MODEMR0 and it has CPG related bits */ |
| .configure = rcar_rst_v3u_enable_wdt_reset, |
| }; |
| |
| static const struct rst_config rcar_rst_gen4 __initconst = { |
| .modemr = 0x00, /* MODEMR0 and it has CPG related bits */ |
| }; |
| |
| static const struct of_device_id rcar_rst_matches[] __initconst = { |
| /* RZ/G1 is handled like R-Car Gen2 */ |
| { .compatible = "renesas,r8a7742-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7743-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7744-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7745-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a77470-rst", .data = &rcar_rst_gen2 }, |
| /* RZ/G2 is handled like R-Car Gen3 */ |
| { .compatible = "renesas,r8a774a1-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a774b1-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a774c0-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a774e1-rst", .data = &rcar_rst_gen3 }, |
| /* R-Car Gen1 */ |
| { .compatible = "renesas,r8a7778-reset-wdt", .data = &rcar_rst_gen1 }, |
| { .compatible = "renesas,r8a7779-reset-wdt", .data = &rcar_rst_gen1 }, |
| /* R-Car Gen2 */ |
| { .compatible = "renesas,r8a7790-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7791-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7792-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7793-rst", .data = &rcar_rst_gen2 }, |
| { .compatible = "renesas,r8a7794-rst", .data = &rcar_rst_gen2 }, |
| /* R-Car Gen3 */ |
| { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a77961-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a77990-rst", .data = &rcar_rst_gen3 }, |
| { .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 }, |
| /* R-Car Gen4 */ |
| { .compatible = "renesas,r8a779a0-rst", .data = &rcar_rst_v3u }, |
| { .compatible = "renesas,r8a779f0-rst", .data = &rcar_rst_gen4 }, |
| { .compatible = "renesas,r8a779g0-rst", .data = &rcar_rst_gen4 }, |
| { /* sentinel */ } |
| }; |
| |
| static int __init rcar_rst_init(void) |
| { |
| const struct of_device_id *match; |
| const struct rst_config *cfg; |
| struct device_node *np; |
| void __iomem *base; |
| int error = 0; |
| |
| np = of_find_matching_node_and_match(NULL, rcar_rst_matches, &match); |
| if (!np) |
| return -ENODEV; |
| |
| base = of_iomap(np, 0); |
| if (!base) { |
| pr_warn("%pOF: Cannot map regs\n", np); |
| error = -ENOMEM; |
| goto out_put; |
| } |
| |
| rcar_rst_base = base; |
| cfg = match->data; |
| rcar_rst_set_rproc_boot_addr_func = cfg->set_rproc_boot_addr; |
| |
| saved_mode = ioread32(base + cfg->modemr); |
| if (cfg->configure) { |
| error = cfg->configure(base); |
| if (error) { |
| pr_warn("%pOF: Cannot run SoC specific configuration\n", |
| np); |
| goto out_put; |
| } |
| } |
| |
| pr_debug("%pOF: MODE = 0x%08x\n", np, saved_mode); |
| |
| out_put: |
| of_node_put(np); |
| return error; |
| } |
| |
| int __init rcar_rst_read_mode_pins(u32 *mode) |
| { |
| int error; |
| |
| if (!rcar_rst_base) { |
| error = rcar_rst_init(); |
| if (error) |
| return error; |
| } |
| |
| *mode = saved_mode; |
| return 0; |
| } |
| |
| int rcar_rst_set_rproc_boot_addr(u64 boot_addr) |
| { |
| if (!rcar_rst_set_rproc_boot_addr_func) |
| return -EIO; |
| |
| return rcar_rst_set_rproc_boot_addr_func(boot_addr); |
| } |
| EXPORT_SYMBOL_GPL(rcar_rst_set_rproc_boot_addr); |