| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * eeprom specific definitions for mac80211 Prism54 drivers |
| * |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> |
| * |
| * Based on: |
| * - the islsm (softmac prism54) driver, which is: |
| * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. |
| * |
| * - LMAC API interface header file for STLC4560 (lmac_longbow.h) |
| * Copyright (C) 2007 Conexant Systems, Inc. |
| * |
| * - islmvc driver |
| * Copyright (C) 2001 Intersil Americas Inc. |
| */ |
| |
| #ifndef EEPROM_H |
| #define EEPROM_H |
| |
| /* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */ |
| |
| struct pda_entry { |
| __le16 len; /* includes both code and data */ |
| __le16 code; |
| u8 data[]; |
| } __packed; |
| |
| struct eeprom_pda_wrap { |
| __le32 magic; |
| __le16 pad; |
| __le16 len; |
| __le32 arm_opcode; |
| u8 data[]; |
| } __packed; |
| |
| struct p54_iq_autocal_entry { |
| __le16 iq_param[4]; |
| } __packed; |
| |
| struct pda_iq_autocal_entry { |
| __le16 freq; |
| struct p54_iq_autocal_entry params; |
| } __packed; |
| |
| struct pda_channel_output_limit { |
| __le16 freq; |
| u8 val_bpsk; |
| u8 val_qpsk; |
| u8 val_16qam; |
| u8 val_64qam; |
| u8 rate_set_mask; |
| u8 rate_set_size; |
| } __packed; |
| |
| struct pda_channel_output_limit_point_longbow { |
| __le16 val_bpsk; |
| __le16 val_qpsk; |
| __le16 val_16qam; |
| __le16 val_64qam; |
| } __packed; |
| |
| struct pda_channel_output_limit_longbow { |
| __le16 freq; |
| struct pda_channel_output_limit_point_longbow point[3]; |
| } __packed; |
| |
| struct pda_pa_curve_data_sample_rev0 { |
| u8 rf_power; |
| u8 pa_detector; |
| u8 pcv; |
| } __packed; |
| |
| struct pda_pa_curve_data_sample_rev1 { |
| u8 rf_power; |
| u8 pa_detector; |
| u8 data_barker; |
| u8 data_bpsk; |
| u8 data_qpsk; |
| u8 data_16qam; |
| u8 data_64qam; |
| } __packed; |
| |
| struct pda_pa_curve_data { |
| u8 cal_method_rev; |
| u8 channels; |
| u8 points_per_channel; |
| u8 padding; |
| u8 data[]; |
| } __packed; |
| |
| struct pda_rssi_cal_ext_entry { |
| __le16 freq; |
| __le16 mul; |
| __le16 add; |
| } __packed; |
| |
| struct pda_rssi_cal_entry { |
| __le16 mul; |
| __le16 add; |
| } __packed; |
| |
| struct pda_country { |
| u8 regdomain; |
| u8 alpha2[2]; |
| u8 flags; |
| } __packed; |
| |
| struct pda_antenna_gain { |
| struct { |
| u8 gain_5GHz; /* 0.25 dBi units */ |
| u8 gain_2GHz; /* 0.25 dBi units */ |
| } __packed antenna[0]; |
| } __packed; |
| |
| struct pda_custom_wrapper { |
| __le16 entries; |
| __le16 entry_size; |
| __le16 offset; |
| __le16 len; |
| u8 data[]; |
| } __packed; |
| |
| /* |
| * this defines the PDR codes used to build PDAs as defined in document |
| * number 553155. The current implementation mirrors version 1.1 of the |
| * document and lists only PDRs supported by the ARM platform. |
| */ |
| |
| /* common and choice range (0x0000 - 0x0fff) */ |
| #define PDR_END 0x0000 |
| #define PDR_MANUFACTURING_PART_NUMBER 0x0001 |
| #define PDR_PDA_VERSION 0x0002 |
| #define PDR_NIC_SERIAL_NUMBER 0x0003 |
| #define PDR_NIC_RAM_SIZE 0x0005 |
| #define PDR_RFMODEM_SUP_RANGE 0x0006 |
| #define PDR_PRISM_MAC_SUP_RANGE 0x0007 |
| #define PDR_NIC_ID 0x0008 |
| |
| #define PDR_MAC_ADDRESS 0x0101 |
| #define PDR_REGULATORY_DOMAIN_LIST 0x0103 /* obsolete */ |
| #define PDR_ALLOWED_CHAN_SET 0x0104 |
| #define PDR_DEFAULT_CHAN 0x0105 |
| #define PDR_TEMPERATURE_TYPE 0x0107 |
| |
| #define PDR_IFR_SETTING 0x0200 |
| #define PDR_RFR_SETTING 0x0201 |
| #define PDR_3861_BASELINE_REG_SETTINGS 0x0202 |
| #define PDR_3861_SHADOW_REG_SETTINGS 0x0203 |
| #define PDR_3861_IFRF_REG_SETTINGS 0x0204 |
| |
| #define PDR_3861_CHAN_CALIB_SET_POINTS 0x0300 |
| #define PDR_3861_CHAN_CALIB_INTEGRATOR 0x0301 |
| |
| #define PDR_3842_PRISM_II_NIC_CONFIG 0x0400 |
| #define PDR_PRISM_USB_ID 0x0401 |
| #define PDR_PRISM_PCI_ID 0x0402 |
| #define PDR_PRISM_PCI_IF_CONFIG 0x0403 |
| #define PDR_PRISM_PCI_PM_CONFIG 0x0404 |
| |
| #define PDR_3861_MF_TEST_CHAN_SET_POINTS 0x0900 |
| #define PDR_3861_MF_TEST_CHAN_INTEGRATORS 0x0901 |
| |
| /* ARM range (0x1000 - 0x1fff) */ |
| #define PDR_COUNTRY_INFORMATION 0x1000 /* obsolete */ |
| #define PDR_INTERFACE_LIST 0x1001 |
| #define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002 |
| #define PDR_OEM_NAME 0x1003 |
| #define PDR_PRODUCT_NAME 0x1004 |
| #define PDR_UTF8_OEM_NAME 0x1005 |
| #define PDR_UTF8_PRODUCT_NAME 0x1006 |
| #define PDR_COUNTRY_LIST 0x1007 |
| #define PDR_DEFAULT_COUNTRY 0x1008 |
| |
| #define PDR_ANTENNA_GAIN 0x1100 |
| |
| #define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901 |
| #define PDR_RSSI_LINEAR_APPROXIMATION 0x1902 |
| #define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903 |
| #define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904 |
| #define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905 |
| #define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906 |
| #define PDR_REGULATORY_POWER_LIMITS 0x1907 |
| #define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908 |
| #define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909 |
| #define PDR_PRISM_TX_IQ_CALIBRATION 0x190a |
| |
| /* reserved range (0x2000 - 0x7fff) */ |
| |
| /* customer range (0x8000 - 0xffff) */ |
| #define PDR_BASEBAND_REGISTERS 0x8000 |
| #define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001 |
| |
| /* used by our modificated eeprom image */ |
| #define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD |
| #define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2 0xCAFF |
| #define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF |
| #define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D |
| |
| /* Interface Definitions */ |
| #define PDR_INTERFACE_ROLE_SERVER 0x0000 |
| #define PDR_INTERFACE_ROLE_CLIENT 0x0001 |
| |
| /* PDR definitions for default country & country list */ |
| #define PDR_COUNTRY_CERT_CODE 0x80 |
| #define PDR_COUNTRY_CERT_CODE_REAL 0x00 |
| #define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80 |
| #define PDR_COUNTRY_CERT_BAND 0x40 |
| #define PDR_COUNTRY_CERT_BAND_2GHZ 0x00 |
| #define PDR_COUNTRY_CERT_BAND_5GHZ 0x40 |
| #define PDR_COUNTRY_CERT_IODOOR 0x30 |
| #define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00 |
| #define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20 |
| #define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30 |
| #define PDR_COUNTRY_CERT_INDEX 0x0f |
| |
| /* Specific LMAC FW/HW variant definitions */ |
| #define PDR_SYNTH_FRONTEND_MASK 0x0007 |
| #define PDR_SYNTH_FRONTEND_DUETTE3 0x0001 |
| #define PDR_SYNTH_FRONTEND_DUETTE2 0x0002 |
| #define PDR_SYNTH_FRONTEND_FRISBEE 0x0003 |
| #define PDR_SYNTH_FRONTEND_XBOW 0x0004 |
| #define PDR_SYNTH_FRONTEND_LONGBOW 0x0005 |
| #define PDR_SYNTH_IQ_CAL_MASK 0x0018 |
| #define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000 |
| #define PDR_SYNTH_IQ_CAL_DISABLED 0x0008 |
| #define PDR_SYNTH_IQ_CAL_ZIF 0x0010 |
| #define PDR_SYNTH_FAA_SWITCH_MASK 0x0020 |
| #define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020 |
| #define PDR_SYNTH_24_GHZ_MASK 0x0040 |
| #define PDR_SYNTH_24_GHZ_DISABLED 0x0040 |
| #define PDR_SYNTH_5_GHZ_MASK 0x0080 |
| #define PDR_SYNTH_5_GHZ_DISABLED 0x0080 |
| #define PDR_SYNTH_RX_DIV_MASK 0x0100 |
| #define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100 |
| #define PDR_SYNTH_TX_DIV_MASK 0x0200 |
| #define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200 |
| #define PDR_SYNTH_ASM_MASK 0x0400 |
| #define PDR_SYNTH_ASM_XSWON 0x0400 |
| |
| #endif /* EEPROM_H */ |
