| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for the PCM512x CODECs |
| * |
| * Author: Mark Brown <broonie@kernel.org> |
| * Copyright 2014 Linaro Ltd |
| */ |
| |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| #include <linux/kernel.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/gcd.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/tlv.h> |
| |
| #include "pcm512x.h" |
| |
| #define PCM512x_NUM_SUPPLIES 3 |
| static const char * const pcm512x_supply_names[PCM512x_NUM_SUPPLIES] = { |
| "AVDD", |
| "DVDD", |
| "CPVDD", |
| }; |
| |
| struct pcm512x_priv { |
| struct regmap *regmap; |
| struct clk *sclk; |
| struct regulator_bulk_data supplies[PCM512x_NUM_SUPPLIES]; |
| struct notifier_block supply_nb[PCM512x_NUM_SUPPLIES]; |
| int fmt; |
| int pll_in; |
| int pll_out; |
| int pll_r; |
| int pll_j; |
| int pll_d; |
| int pll_p; |
| unsigned long real_pll; |
| unsigned long overclock_pll; |
| unsigned long overclock_dac; |
| unsigned long overclock_dsp; |
| int mute; |
| struct mutex mutex; |
| unsigned int bclk_ratio; |
| }; |
| |
| /* |
| * We can't use the same notifier block for more than one supply and |
| * there's no way I can see to get from a callback to the caller |
| * except container_of(). |
| */ |
| #define PCM512x_REGULATOR_EVENT(n) \ |
| static int pcm512x_regulator_event_##n(struct notifier_block *nb, \ |
| unsigned long event, void *data) \ |
| { \ |
| struct pcm512x_priv *pcm512x = container_of(nb, struct pcm512x_priv, \ |
| supply_nb[n]); \ |
| if (event & REGULATOR_EVENT_DISABLE) { \ |
| regcache_mark_dirty(pcm512x->regmap); \ |
| regcache_cache_only(pcm512x->regmap, true); \ |
| } \ |
| return 0; \ |
| } |
| |
| PCM512x_REGULATOR_EVENT(0) |
| PCM512x_REGULATOR_EVENT(1) |
| PCM512x_REGULATOR_EVENT(2) |
| |
| static const struct reg_default pcm512x_reg_defaults[] = { |
| { PCM512x_RESET, 0x00 }, |
| { PCM512x_POWER, 0x00 }, |
| { PCM512x_MUTE, 0x00 }, |
| { PCM512x_DSP, 0x00 }, |
| { PCM512x_PLL_REF, 0x00 }, |
| { PCM512x_DAC_REF, 0x00 }, |
| { PCM512x_DAC_ROUTING, 0x11 }, |
| { PCM512x_DSP_PROGRAM, 0x01 }, |
| { PCM512x_CLKDET, 0x00 }, |
| { PCM512x_AUTO_MUTE, 0x00 }, |
| { PCM512x_ERROR_DETECT, 0x00 }, |
| { PCM512x_DIGITAL_VOLUME_1, 0x00 }, |
| { PCM512x_DIGITAL_VOLUME_2, 0x30 }, |
| { PCM512x_DIGITAL_VOLUME_3, 0x30 }, |
| { PCM512x_DIGITAL_MUTE_1, 0x22 }, |
| { PCM512x_DIGITAL_MUTE_2, 0x00 }, |
| { PCM512x_DIGITAL_MUTE_3, 0x07 }, |
| { PCM512x_OUTPUT_AMPLITUDE, 0x00 }, |
| { PCM512x_ANALOG_GAIN_CTRL, 0x00 }, |
| { PCM512x_UNDERVOLTAGE_PROT, 0x00 }, |
| { PCM512x_ANALOG_MUTE_CTRL, 0x00 }, |
| { PCM512x_ANALOG_GAIN_BOOST, 0x00 }, |
| { PCM512x_VCOM_CTRL_1, 0x00 }, |
| { PCM512x_VCOM_CTRL_2, 0x01 }, |
| { PCM512x_BCLK_LRCLK_CFG, 0x00 }, |
| { PCM512x_MASTER_MODE, 0x7c }, |
| { PCM512x_GPIO_DACIN, 0x00 }, |
| { PCM512x_GPIO_PLLIN, 0x00 }, |
| { PCM512x_SYNCHRONIZE, 0x10 }, |
| { PCM512x_PLL_COEFF_0, 0x00 }, |
| { PCM512x_PLL_COEFF_1, 0x00 }, |
| { PCM512x_PLL_COEFF_2, 0x00 }, |
| { PCM512x_PLL_COEFF_3, 0x00 }, |
| { PCM512x_PLL_COEFF_4, 0x00 }, |
| { PCM512x_DSP_CLKDIV, 0x00 }, |
| { PCM512x_DAC_CLKDIV, 0x00 }, |
| { PCM512x_NCP_CLKDIV, 0x00 }, |
| { PCM512x_OSR_CLKDIV, 0x00 }, |
| { PCM512x_MASTER_CLKDIV_1, 0x00 }, |
| { PCM512x_MASTER_CLKDIV_2, 0x00 }, |
| { PCM512x_FS_SPEED_MODE, 0x00 }, |
| { PCM512x_IDAC_1, 0x01 }, |
| { PCM512x_IDAC_2, 0x00 }, |
| }; |
| |
| static bool pcm512x_readable(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case PCM512x_RESET: |
| case PCM512x_POWER: |
| case PCM512x_MUTE: |
| case PCM512x_PLL_EN: |
| case PCM512x_SPI_MISO_FUNCTION: |
| case PCM512x_DSP: |
| case PCM512x_GPIO_EN: |
| case PCM512x_BCLK_LRCLK_CFG: |
| case PCM512x_DSP_GPIO_INPUT: |
| case PCM512x_MASTER_MODE: |
| case PCM512x_PLL_REF: |
| case PCM512x_DAC_REF: |
| case PCM512x_GPIO_DACIN: |
| case PCM512x_GPIO_PLLIN: |
| case PCM512x_SYNCHRONIZE: |
| case PCM512x_PLL_COEFF_0: |
| case PCM512x_PLL_COEFF_1: |
| case PCM512x_PLL_COEFF_2: |
| case PCM512x_PLL_COEFF_3: |
| case PCM512x_PLL_COEFF_4: |
| case PCM512x_DSP_CLKDIV: |
| case PCM512x_DAC_CLKDIV: |
| case PCM512x_NCP_CLKDIV: |
| case PCM512x_OSR_CLKDIV: |
| case PCM512x_MASTER_CLKDIV_1: |
| case PCM512x_MASTER_CLKDIV_2: |
| case PCM512x_FS_SPEED_MODE: |
| case PCM512x_IDAC_1: |
| case PCM512x_IDAC_2: |
| case PCM512x_ERROR_DETECT: |
| case PCM512x_I2S_1: |
| case PCM512x_I2S_2: |
| case PCM512x_DAC_ROUTING: |
| case PCM512x_DSP_PROGRAM: |
| case PCM512x_CLKDET: |
| case PCM512x_AUTO_MUTE: |
| case PCM512x_DIGITAL_VOLUME_1: |
| case PCM512x_DIGITAL_VOLUME_2: |
| case PCM512x_DIGITAL_VOLUME_3: |
| case PCM512x_DIGITAL_MUTE_1: |
| case PCM512x_DIGITAL_MUTE_2: |
| case PCM512x_DIGITAL_MUTE_3: |
| case PCM512x_GPIO_OUTPUT_1: |
| case PCM512x_GPIO_OUTPUT_2: |
| case PCM512x_GPIO_OUTPUT_3: |
| case PCM512x_GPIO_OUTPUT_4: |
| case PCM512x_GPIO_OUTPUT_5: |
| case PCM512x_GPIO_OUTPUT_6: |
| case PCM512x_GPIO_CONTROL_1: |
| case PCM512x_GPIO_CONTROL_2: |
| case PCM512x_OVERFLOW: |
| case PCM512x_RATE_DET_1: |
| case PCM512x_RATE_DET_2: |
| case PCM512x_RATE_DET_3: |
| case PCM512x_RATE_DET_4: |
| case PCM512x_CLOCK_STATUS: |
| case PCM512x_ANALOG_MUTE_DET: |
| case PCM512x_GPIN: |
| case PCM512x_DIGITAL_MUTE_DET: |
| case PCM512x_OUTPUT_AMPLITUDE: |
| case PCM512x_ANALOG_GAIN_CTRL: |
| case PCM512x_UNDERVOLTAGE_PROT: |
| case PCM512x_ANALOG_MUTE_CTRL: |
| case PCM512x_ANALOG_GAIN_BOOST: |
| case PCM512x_VCOM_CTRL_1: |
| case PCM512x_VCOM_CTRL_2: |
| case PCM512x_CRAM_CTRL: |
| case PCM512x_FLEX_A: |
| case PCM512x_FLEX_B: |
| return true; |
| default: |
| /* There are 256 raw register addresses */ |
| return reg < 0xff; |
| } |
| } |
| |
| static bool pcm512x_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case PCM512x_PLL_EN: |
| case PCM512x_OVERFLOW: |
| case PCM512x_RATE_DET_1: |
| case PCM512x_RATE_DET_2: |
| case PCM512x_RATE_DET_3: |
| case PCM512x_RATE_DET_4: |
| case PCM512x_CLOCK_STATUS: |
| case PCM512x_ANALOG_MUTE_DET: |
| case PCM512x_GPIN: |
| case PCM512x_DIGITAL_MUTE_DET: |
| case PCM512x_CRAM_CTRL: |
| return true; |
| default: |
| /* There are 256 raw register addresses */ |
| return reg < 0xff; |
| } |
| } |
| |
| static int pcm512x_overclock_pll_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = pcm512x->overclock_pll; |
| return 0; |
| } |
| |
| static int pcm512x_overclock_pll_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| switch (snd_soc_component_get_bias_level(component)) { |
| case SND_SOC_BIAS_OFF: |
| case SND_SOC_BIAS_STANDBY: |
| break; |
| default: |
| return -EBUSY; |
| } |
| |
| pcm512x->overclock_pll = ucontrol->value.integer.value[0]; |
| return 0; |
| } |
| |
| static int pcm512x_overclock_dsp_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = pcm512x->overclock_dsp; |
| return 0; |
| } |
| |
| static int pcm512x_overclock_dsp_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| switch (snd_soc_component_get_bias_level(component)) { |
| case SND_SOC_BIAS_OFF: |
| case SND_SOC_BIAS_STANDBY: |
| break; |
| default: |
| return -EBUSY; |
| } |
| |
| pcm512x->overclock_dsp = ucontrol->value.integer.value[0]; |
| return 0; |
| } |
| |
| static int pcm512x_overclock_dac_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = pcm512x->overclock_dac; |
| return 0; |
| } |
| |
| static int pcm512x_overclock_dac_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| switch (snd_soc_component_get_bias_level(component)) { |
| case SND_SOC_BIAS_OFF: |
| case SND_SOC_BIAS_STANDBY: |
| break; |
| default: |
| return -EBUSY; |
| } |
| |
| pcm512x->overclock_dac = ucontrol->value.integer.value[0]; |
| return 0; |
| } |
| |
| static const DECLARE_TLV_DB_SCALE(digital_tlv, -10350, 50, 1); |
| static const DECLARE_TLV_DB_SCALE(analog_tlv, -600, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(boost_tlv, 0, 80, 0); |
| |
| static const char * const pcm512x_dsp_program_texts[] = { |
| "FIR interpolation with de-emphasis", |
| "Low latency IIR with de-emphasis", |
| "High attenuation with de-emphasis", |
| "Fixed process flow", |
| "Ringing-less low latency FIR", |
| }; |
| |
| static const unsigned int pcm512x_dsp_program_values[] = { |
| 1, |
| 2, |
| 3, |
| 5, |
| 7, |
| }; |
| |
| static SOC_VALUE_ENUM_SINGLE_DECL(pcm512x_dsp_program, |
| PCM512x_DSP_PROGRAM, 0, 0x1f, |
| pcm512x_dsp_program_texts, |
| pcm512x_dsp_program_values); |
| |
| static const char * const pcm512x_clk_missing_text[] = { |
| "1s", "2s", "3s", "4s", "5s", "6s", "7s", "8s" |
| }; |
| |
| static const struct soc_enum pcm512x_clk_missing = |
| SOC_ENUM_SINGLE(PCM512x_CLKDET, 0, 8, pcm512x_clk_missing_text); |
| |
| static const char * const pcm512x_autom_text[] = { |
| "21ms", "106ms", "213ms", "533ms", "1.07s", "2.13s", "5.33s", "10.66s" |
| }; |
| |
| static const struct soc_enum pcm512x_autom_l = |
| SOC_ENUM_SINGLE(PCM512x_AUTO_MUTE, PCM512x_ATML_SHIFT, 8, |
| pcm512x_autom_text); |
| |
| static const struct soc_enum pcm512x_autom_r = |
| SOC_ENUM_SINGLE(PCM512x_AUTO_MUTE, PCM512x_ATMR_SHIFT, 8, |
| pcm512x_autom_text); |
| |
| static const char * const pcm512x_ramp_rate_text[] = { |
| "1 sample/update", "2 samples/update", "4 samples/update", |
| "Immediate" |
| }; |
| |
| static const struct soc_enum pcm512x_vndf = |
| SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNDF_SHIFT, 4, |
| pcm512x_ramp_rate_text); |
| |
| static const struct soc_enum pcm512x_vnuf = |
| SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNUF_SHIFT, 4, |
| pcm512x_ramp_rate_text); |
| |
| static const struct soc_enum pcm512x_vedf = |
| SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_2, PCM512x_VEDF_SHIFT, 4, |
| pcm512x_ramp_rate_text); |
| |
| static const char * const pcm512x_ramp_step_text[] = { |
| "4dB/step", "2dB/step", "1dB/step", "0.5dB/step" |
| }; |
| |
| static const struct soc_enum pcm512x_vnds = |
| SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNDS_SHIFT, 4, |
| pcm512x_ramp_step_text); |
| |
| static const struct soc_enum pcm512x_vnus = |
| SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNUS_SHIFT, 4, |
| pcm512x_ramp_step_text); |
| |
| static const struct soc_enum pcm512x_veds = |
| SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_2, PCM512x_VEDS_SHIFT, 4, |
| pcm512x_ramp_step_text); |
| |
| static int pcm512x_update_mute(struct pcm512x_priv *pcm512x) |
| { |
| return regmap_update_bits( |
| pcm512x->regmap, PCM512x_MUTE, PCM512x_RQML | PCM512x_RQMR, |
| (!!(pcm512x->mute & 0x5) << PCM512x_RQML_SHIFT) |
| | (!!(pcm512x->mute & 0x3) << PCM512x_RQMR_SHIFT)); |
| } |
| |
| static int pcm512x_digital_playback_switch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| mutex_lock(&pcm512x->mutex); |
| ucontrol->value.integer.value[0] = !(pcm512x->mute & 0x4); |
| ucontrol->value.integer.value[1] = !(pcm512x->mute & 0x2); |
| mutex_unlock(&pcm512x->mutex); |
| |
| return 0; |
| } |
| |
| static int pcm512x_digital_playback_switch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| int ret, changed = 0; |
| |
| mutex_lock(&pcm512x->mutex); |
| |
| if ((pcm512x->mute & 0x4) == (ucontrol->value.integer.value[0] << 2)) { |
| pcm512x->mute ^= 0x4; |
| changed = 1; |
| } |
| if ((pcm512x->mute & 0x2) == (ucontrol->value.integer.value[1] << 1)) { |
| pcm512x->mute ^= 0x2; |
| changed = 1; |
| } |
| |
| if (changed) { |
| ret = pcm512x_update_mute(pcm512x); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to update digital mute: %d\n", ret); |
| mutex_unlock(&pcm512x->mutex); |
| return ret; |
| } |
| } |
| |
| mutex_unlock(&pcm512x->mutex); |
| |
| return changed; |
| } |
| |
| static const struct snd_kcontrol_new pcm512x_controls[] = { |
| SOC_DOUBLE_R_TLV("Digital Playback Volume", PCM512x_DIGITAL_VOLUME_2, |
| PCM512x_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv), |
| SOC_DOUBLE_TLV("Analogue Playback Volume", PCM512x_ANALOG_GAIN_CTRL, |
| PCM512x_LAGN_SHIFT, PCM512x_RAGN_SHIFT, 1, 1, analog_tlv), |
| SOC_DOUBLE_TLV("Analogue Playback Boost Volume", PCM512x_ANALOG_GAIN_BOOST, |
| PCM512x_AGBL_SHIFT, PCM512x_AGBR_SHIFT, 1, 0, boost_tlv), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Digital Playback Switch", |
| .index = 0, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = snd_ctl_boolean_stereo_info, |
| .get = pcm512x_digital_playback_switch_get, |
| .put = pcm512x_digital_playback_switch_put |
| }, |
| |
| SOC_SINGLE("Deemphasis Switch", PCM512x_DSP, PCM512x_DEMP_SHIFT, 1, 1), |
| SOC_ENUM("DSP Program", pcm512x_dsp_program), |
| |
| SOC_ENUM("Clock Missing Period", pcm512x_clk_missing), |
| SOC_ENUM("Auto Mute Time Left", pcm512x_autom_l), |
| SOC_ENUM("Auto Mute Time Right", pcm512x_autom_r), |
| SOC_SINGLE("Auto Mute Mono Switch", PCM512x_DIGITAL_MUTE_3, |
| PCM512x_ACTL_SHIFT, 1, 0), |
| SOC_DOUBLE("Auto Mute Switch", PCM512x_DIGITAL_MUTE_3, PCM512x_AMLE_SHIFT, |
| PCM512x_AMRE_SHIFT, 1, 0), |
| |
| SOC_ENUM("Volume Ramp Down Rate", pcm512x_vndf), |
| SOC_ENUM("Volume Ramp Down Step", pcm512x_vnds), |
| SOC_ENUM("Volume Ramp Up Rate", pcm512x_vnuf), |
| SOC_ENUM("Volume Ramp Up Step", pcm512x_vnus), |
| SOC_ENUM("Volume Ramp Down Emergency Rate", pcm512x_vedf), |
| SOC_ENUM("Volume Ramp Down Emergency Step", pcm512x_veds), |
| |
| SOC_SINGLE_EXT("Max Overclock PLL", SND_SOC_NOPM, 0, 20, 0, |
| pcm512x_overclock_pll_get, pcm512x_overclock_pll_put), |
| SOC_SINGLE_EXT("Max Overclock DSP", SND_SOC_NOPM, 0, 40, 0, |
| pcm512x_overclock_dsp_get, pcm512x_overclock_dsp_put), |
| SOC_SINGLE_EXT("Max Overclock DAC", SND_SOC_NOPM, 0, 40, 0, |
| pcm512x_overclock_dac_get, pcm512x_overclock_dac_put), |
| }; |
| |
| static const struct snd_soc_dapm_widget pcm512x_dapm_widgets[] = { |
| SND_SOC_DAPM_DAC("DACL", NULL, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_DAC("DACR", NULL, SND_SOC_NOPM, 0, 0), |
| |
| SND_SOC_DAPM_OUTPUT("OUTL"), |
| SND_SOC_DAPM_OUTPUT("OUTR"), |
| }; |
| |
| static const struct snd_soc_dapm_route pcm512x_dapm_routes[] = { |
| { "DACL", NULL, "Playback" }, |
| { "DACR", NULL, "Playback" }, |
| |
| { "OUTL", NULL, "DACL" }, |
| { "OUTR", NULL, "DACR" }, |
| }; |
| |
| static unsigned long pcm512x_pll_max(struct pcm512x_priv *pcm512x) |
| { |
| return 25000000 + 25000000 * pcm512x->overclock_pll / 100; |
| } |
| |
| static unsigned long pcm512x_dsp_max(struct pcm512x_priv *pcm512x) |
| { |
| return 50000000 + 50000000 * pcm512x->overclock_dsp / 100; |
| } |
| |
| static unsigned long pcm512x_dac_max(struct pcm512x_priv *pcm512x, |
| unsigned long rate) |
| { |
| return rate + rate * pcm512x->overclock_dac / 100; |
| } |
| |
| static unsigned long pcm512x_sck_max(struct pcm512x_priv *pcm512x) |
| { |
| if (!pcm512x->pll_out) |
| return 25000000; |
| return pcm512x_pll_max(pcm512x); |
| } |
| |
| static unsigned long pcm512x_ncp_target(struct pcm512x_priv *pcm512x, |
| unsigned long dac_rate) |
| { |
| /* |
| * If the DAC is not actually overclocked, use the good old |
| * NCP target rate... |
| */ |
| if (dac_rate <= 6144000) |
| return 1536000; |
| /* |
| * ...but if the DAC is in fact overclocked, bump the NCP target |
| * rate to get the recommended dividers even when overclocking. |
| */ |
| return pcm512x_dac_max(pcm512x, 1536000); |
| } |
| |
| static const u32 pcm512x_dai_rates[] = { |
| 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, |
| 88200, 96000, 176400, 192000, 384000, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list constraints_slave = { |
| .count = ARRAY_SIZE(pcm512x_dai_rates), |
| .list = pcm512x_dai_rates, |
| }; |
| |
| static int pcm512x_hw_rule_rate(struct snd_pcm_hw_params *params, |
| struct snd_pcm_hw_rule *rule) |
| { |
| struct pcm512x_priv *pcm512x = rule->private; |
| struct snd_interval ranges[2]; |
| int frame_size; |
| |
| frame_size = snd_soc_params_to_frame_size(params); |
| if (frame_size < 0) |
| return frame_size; |
| |
| switch (frame_size) { |
| case 32: |
| /* No hole when the frame size is 32. */ |
| return 0; |
| case 48: |
| case 64: |
| /* There is only one hole in the range of supported |
| * rates, but it moves with the frame size. |
| */ |
| memset(ranges, 0, sizeof(ranges)); |
| ranges[0].min = 8000; |
| ranges[0].max = pcm512x_sck_max(pcm512x) / frame_size / 2; |
| ranges[1].min = DIV_ROUND_UP(16000000, frame_size); |
| ranges[1].max = 384000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return snd_interval_ranges(hw_param_interval(params, rule->var), |
| ARRAY_SIZE(ranges), ranges, 0); |
| } |
| |
| static int pcm512x_dai_startup_master(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| struct device *dev = dai->dev; |
| struct snd_pcm_hw_constraint_ratnums *constraints_no_pll; |
| struct snd_ratnum *rats_no_pll; |
| |
| if (IS_ERR(pcm512x->sclk)) { |
| dev_err(dev, "Need SCLK for master mode: %ld\n", |
| PTR_ERR(pcm512x->sclk)); |
| return PTR_ERR(pcm512x->sclk); |
| } |
| |
| if (pcm512x->pll_out) |
| return snd_pcm_hw_rule_add(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| pcm512x_hw_rule_rate, |
| pcm512x, |
| SNDRV_PCM_HW_PARAM_FRAME_BITS, |
| SNDRV_PCM_HW_PARAM_CHANNELS, -1); |
| |
| constraints_no_pll = devm_kzalloc(dev, sizeof(*constraints_no_pll), |
| GFP_KERNEL); |
| if (!constraints_no_pll) |
| return -ENOMEM; |
| constraints_no_pll->nrats = 1; |
| rats_no_pll = devm_kzalloc(dev, sizeof(*rats_no_pll), GFP_KERNEL); |
| if (!rats_no_pll) |
| return -ENOMEM; |
| constraints_no_pll->rats = rats_no_pll; |
| rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; |
| rats_no_pll->den_min = 1; |
| rats_no_pll->den_max = 128; |
| rats_no_pll->den_step = 1; |
| |
| return snd_pcm_hw_constraint_ratnums(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| constraints_no_pll); |
| } |
| |
| static int pcm512x_dai_startup_slave(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| struct device *dev = dai->dev; |
| struct regmap *regmap = pcm512x->regmap; |
| |
| if (IS_ERR(pcm512x->sclk)) { |
| dev_info(dev, "No SCLK, using BCLK: %ld\n", |
| PTR_ERR(pcm512x->sclk)); |
| |
| /* Disable reporting of missing SCLK as an error */ |
| regmap_update_bits(regmap, PCM512x_ERROR_DETECT, |
| PCM512x_IDCH, PCM512x_IDCH); |
| |
| /* Switch PLL input to BCLK */ |
| regmap_update_bits(regmap, PCM512x_PLL_REF, |
| PCM512x_SREF, PCM512x_SREF_BCK); |
| } |
| |
| return snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &constraints_slave); |
| } |
| |
| static int pcm512x_dai_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| switch (pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| case SND_SOC_DAIFMT_CBM_CFS: |
| return pcm512x_dai_startup_master(substream, dai); |
| |
| case SND_SOC_DAIFMT_CBS_CFS: |
| return pcm512x_dai_startup_slave(substream, dai); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int pcm512x_set_bias_level(struct snd_soc_component *component, |
| enum snd_soc_bias_level level) |
| { |
| struct pcm512x_priv *pcm512x = dev_get_drvdata(component->dev); |
| int ret; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| case SND_SOC_BIAS_PREPARE: |
| break; |
| |
| case SND_SOC_BIAS_STANDBY: |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER, |
| PCM512x_RQST, 0); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to remove standby: %d\n", |
| ret); |
| return ret; |
| } |
| break; |
| |
| case SND_SOC_BIAS_OFF: |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER, |
| PCM512x_RQST, PCM512x_RQST); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to request standby: %d\n", |
| ret); |
| return ret; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned long pcm512x_find_sck(struct snd_soc_dai *dai, |
| unsigned long bclk_rate) |
| { |
| struct device *dev = dai->dev; |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| unsigned long sck_rate; |
| int pow2; |
| |
| /* 64 MHz <= pll_rate <= 100 MHz, VREF mode */ |
| /* 16 MHz <= sck_rate <= 25 MHz, VREF mode */ |
| |
| /* select sck_rate as a multiple of bclk_rate but still with |
| * as many factors of 2 as possible, as that makes it easier |
| * to find a fast DAC rate |
| */ |
| pow2 = 1 << fls((pcm512x_pll_max(pcm512x) - 16000000) / bclk_rate); |
| for (; pow2; pow2 >>= 1) { |
| sck_rate = rounddown(pcm512x_pll_max(pcm512x), |
| bclk_rate * pow2); |
| if (sck_rate >= 16000000) |
| break; |
| } |
| if (!pow2) { |
| dev_err(dev, "Impossible to generate a suitable SCK\n"); |
| return 0; |
| } |
| |
| dev_dbg(dev, "sck_rate %lu\n", sck_rate); |
| return sck_rate; |
| } |
| |
| /* pll_rate = pllin_rate * R * J.D / P |
| * 1 <= R <= 16 |
| * 1 <= J <= 63 |
| * 0 <= D <= 9999 |
| * 1 <= P <= 15 |
| * 64 MHz <= pll_rate <= 100 MHz |
| * if D == 0 |
| * 1 MHz <= pllin_rate / P <= 20 MHz |
| * else if D > 0 |
| * 6.667 MHz <= pllin_rate / P <= 20 MHz |
| * 4 <= J <= 11 |
| * R = 1 |
| */ |
| static int pcm512x_find_pll_coeff(struct snd_soc_dai *dai, |
| unsigned long pllin_rate, |
| unsigned long pll_rate) |
| { |
| struct device *dev = dai->dev; |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| unsigned long common; |
| int R, J, D, P; |
| unsigned long K; /* 10000 * J.D */ |
| unsigned long num; |
| unsigned long den; |
| |
| common = gcd(pll_rate, pllin_rate); |
| dev_dbg(dev, "pll %lu pllin %lu common %lu\n", |
| pll_rate, pllin_rate, common); |
| num = pll_rate / common; |
| den = pllin_rate / common; |
| |
| /* pllin_rate / P (or here, den) cannot be greater than 20 MHz */ |
| if (pllin_rate / den > 20000000 && num < 8) { |
| num *= DIV_ROUND_UP(pllin_rate / den, 20000000); |
| den *= DIV_ROUND_UP(pllin_rate / den, 20000000); |
| } |
| dev_dbg(dev, "num / den = %lu / %lu\n", num, den); |
| |
| P = den; |
| if (den <= 15 && num <= 16 * 63 |
| && 1000000 <= pllin_rate / P && pllin_rate / P <= 20000000) { |
| /* Try the case with D = 0 */ |
| D = 0; |
| /* factor 'num' into J and R, such that R <= 16 and J <= 63 */ |
| for (R = 16; R; R--) { |
| if (num % R) |
| continue; |
| J = num / R; |
| if (J == 0 || J > 63) |
| continue; |
| |
| dev_dbg(dev, "R * J / P = %d * %d / %d\n", R, J, P); |
| pcm512x->real_pll = pll_rate; |
| goto done; |
| } |
| /* no luck */ |
| } |
| |
| R = 1; |
| |
| if (num > 0xffffffffUL / 10000) |
| goto fallback; |
| |
| /* Try to find an exact pll_rate using the D > 0 case */ |
| common = gcd(10000 * num, den); |
| num = 10000 * num / common; |
| den /= common; |
| dev_dbg(dev, "num %lu den %lu common %lu\n", num, den, common); |
| |
| for (P = den; P <= 15; P++) { |
| if (pllin_rate / P < 6667000 || 200000000 < pllin_rate / P) |
| continue; |
| if (num * P % den) |
| continue; |
| K = num * P / den; |
| /* J == 12 is ok if D == 0 */ |
| if (K < 40000 || K > 120000) |
| continue; |
| |
| J = K / 10000; |
| D = K % 10000; |
| dev_dbg(dev, "J.D / P = %d.%04d / %d\n", J, D, P); |
| pcm512x->real_pll = pll_rate; |
| goto done; |
| } |
| |
| /* Fall back to an approximate pll_rate */ |
| |
| fallback: |
| /* find smallest possible P */ |
| P = DIV_ROUND_UP(pllin_rate, 20000000); |
| if (!P) |
| P = 1; |
| else if (P > 15) { |
| dev_err(dev, "Need a slower clock as pll-input\n"); |
| return -EINVAL; |
| } |
| if (pllin_rate / P < 6667000) { |
| dev_err(dev, "Need a faster clock as pll-input\n"); |
| return -EINVAL; |
| } |
| K = DIV_ROUND_CLOSEST_ULL(10000ULL * pll_rate * P, pllin_rate); |
| if (K < 40000) |
| K = 40000; |
| /* J == 12 is ok if D == 0 */ |
| if (K > 120000) |
| K = 120000; |
| J = K / 10000; |
| D = K % 10000; |
| dev_dbg(dev, "J.D / P ~ %d.%04d / %d\n", J, D, P); |
| pcm512x->real_pll = DIV_ROUND_DOWN_ULL((u64)K * pllin_rate, 10000 * P); |
| |
| done: |
| pcm512x->pll_r = R; |
| pcm512x->pll_j = J; |
| pcm512x->pll_d = D; |
| pcm512x->pll_p = P; |
| return 0; |
| } |
| |
| static unsigned long pcm512x_pllin_dac_rate(struct snd_soc_dai *dai, |
| unsigned long osr_rate, |
| unsigned long pllin_rate) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| unsigned long dac_rate; |
| |
| if (!pcm512x->pll_out) |
| return 0; /* no PLL to bypass, force SCK as DAC input */ |
| |
| if (pllin_rate % osr_rate) |
| return 0; /* futile, quit early */ |
| |
| /* run DAC no faster than 6144000 Hz */ |
| for (dac_rate = rounddown(pcm512x_dac_max(pcm512x, 6144000), osr_rate); |
| dac_rate; |
| dac_rate -= osr_rate) { |
| |
| if (pllin_rate / dac_rate > 128) |
| return 0; /* DAC divider would be too big */ |
| |
| if (!(pllin_rate % dac_rate)) |
| return dac_rate; |
| |
| dac_rate -= osr_rate; |
| } |
| |
| return 0; |
| } |
| |
| static int pcm512x_set_dividers(struct snd_soc_dai *dai, |
| struct snd_pcm_hw_params *params) |
| { |
| struct device *dev = dai->dev; |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| unsigned long pllin_rate = 0; |
| unsigned long pll_rate; |
| unsigned long sck_rate; |
| unsigned long mck_rate; |
| unsigned long bclk_rate; |
| unsigned long sample_rate; |
| unsigned long osr_rate; |
| unsigned long dacsrc_rate; |
| int bclk_div; |
| int lrclk_div; |
| int dsp_div; |
| int dac_div; |
| unsigned long dac_rate; |
| int ncp_div; |
| int osr_div; |
| int ret; |
| int idac; |
| int fssp; |
| int gpio; |
| |
| if (pcm512x->bclk_ratio > 0) { |
| lrclk_div = pcm512x->bclk_ratio; |
| } else { |
| lrclk_div = snd_soc_params_to_frame_size(params); |
| |
| if (lrclk_div == 0) { |
| dev_err(dev, "No LRCLK?\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (!pcm512x->pll_out) { |
| sck_rate = clk_get_rate(pcm512x->sclk); |
| bclk_rate = params_rate(params) * lrclk_div; |
| bclk_div = DIV_ROUND_CLOSEST(sck_rate, bclk_rate); |
| |
| mck_rate = sck_rate; |
| } else { |
| ret = snd_soc_params_to_bclk(params); |
| if (ret < 0) { |
| dev_err(dev, "Failed to find suitable BCLK: %d\n", ret); |
| return ret; |
| } |
| if (ret == 0) { |
| dev_err(dev, "No BCLK?\n"); |
| return -EINVAL; |
| } |
| bclk_rate = ret; |
| |
| pllin_rate = clk_get_rate(pcm512x->sclk); |
| |
| sck_rate = pcm512x_find_sck(dai, bclk_rate); |
| if (!sck_rate) |
| return -EINVAL; |
| pll_rate = 4 * sck_rate; |
| |
| ret = pcm512x_find_pll_coeff(dai, pllin_rate, pll_rate); |
| if (ret != 0) |
| return ret; |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_PLL_COEFF_0, pcm512x->pll_p - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write PLL P: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_PLL_COEFF_1, pcm512x->pll_j); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write PLL J: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_PLL_COEFF_2, pcm512x->pll_d >> 8); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write PLL D msb: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_PLL_COEFF_3, pcm512x->pll_d & 0xff); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write PLL D lsb: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_PLL_COEFF_4, pcm512x->pll_r - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write PLL R: %d\n", ret); |
| return ret; |
| } |
| |
| mck_rate = pcm512x->real_pll; |
| |
| bclk_div = DIV_ROUND_CLOSEST(sck_rate, bclk_rate); |
| } |
| |
| if (bclk_div > 128) { |
| dev_err(dev, "Failed to find BCLK divider\n"); |
| return -EINVAL; |
| } |
| |
| /* the actual rate */ |
| sample_rate = sck_rate / bclk_div / lrclk_div; |
| osr_rate = 16 * sample_rate; |
| |
| /* run DSP no faster than 50 MHz */ |
| dsp_div = mck_rate > pcm512x_dsp_max(pcm512x) ? 2 : 1; |
| |
| dac_rate = pcm512x_pllin_dac_rate(dai, osr_rate, pllin_rate); |
| if (dac_rate) { |
| /* the desired clock rate is "compatible" with the pll input |
| * clock, so use that clock as dac input instead of the pll |
| * output clock since the pll will introduce jitter and thus |
| * noise. |
| */ |
| dev_dbg(dev, "using pll input as dac input\n"); |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_DAC_REF, |
| PCM512x_SDAC, PCM512x_SDAC_GPIO); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to set gpio as dacref: %d\n", ret); |
| return ret; |
| } |
| |
| gpio = PCM512x_GREF_GPIO1 + pcm512x->pll_in - 1; |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_DACIN, |
| PCM512x_GREF, gpio); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to set gpio %d as dacin: %d\n", |
| pcm512x->pll_in, ret); |
| return ret; |
| } |
| |
| dacsrc_rate = pllin_rate; |
| } else { |
| /* run DAC no faster than 6144000 Hz */ |
| unsigned long dac_mul = pcm512x_dac_max(pcm512x, 6144000) |
| / osr_rate; |
| unsigned long sck_mul = sck_rate / osr_rate; |
| |
| for (; dac_mul; dac_mul--) { |
| if (!(sck_mul % dac_mul)) |
| break; |
| } |
| if (!dac_mul) { |
| dev_err(dev, "Failed to find DAC rate\n"); |
| return -EINVAL; |
| } |
| |
| dac_rate = dac_mul * osr_rate; |
| dev_dbg(dev, "dac_rate %lu sample_rate %lu\n", |
| dac_rate, sample_rate); |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_DAC_REF, |
| PCM512x_SDAC, PCM512x_SDAC_SCK); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to set sck as dacref: %d\n", ret); |
| return ret; |
| } |
| |
| dacsrc_rate = sck_rate; |
| } |
| |
| osr_div = DIV_ROUND_CLOSEST(dac_rate, osr_rate); |
| if (osr_div > 128) { |
| dev_err(dev, "Failed to find OSR divider\n"); |
| return -EINVAL; |
| } |
| |
| dac_div = DIV_ROUND_CLOSEST(dacsrc_rate, dac_rate); |
| if (dac_div > 128) { |
| dev_err(dev, "Failed to find DAC divider\n"); |
| return -EINVAL; |
| } |
| dac_rate = dacsrc_rate / dac_div; |
| |
| ncp_div = DIV_ROUND_CLOSEST(dac_rate, |
| pcm512x_ncp_target(pcm512x, dac_rate)); |
| if (ncp_div > 128 || dac_rate / ncp_div > 2048000) { |
| /* run NCP no faster than 2048000 Hz, but why? */ |
| ncp_div = DIV_ROUND_UP(dac_rate, 2048000); |
| if (ncp_div > 128) { |
| dev_err(dev, "Failed to find NCP divider\n"); |
| return -EINVAL; |
| } |
| } |
| |
| idac = mck_rate / (dsp_div * sample_rate); |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_DSP_CLKDIV, dsp_div - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write DSP divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_DAC_CLKDIV, dac_div - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write DAC divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_NCP_CLKDIV, ncp_div - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write NCP divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_OSR_CLKDIV, osr_div - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write OSR divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_MASTER_CLKDIV_1, bclk_div - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write BCLK divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, |
| PCM512x_MASTER_CLKDIV_2, lrclk_div - 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write LRCLK divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_IDAC_1, idac >> 8); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write IDAC msb divider: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_IDAC_2, idac & 0xff); |
| if (ret != 0) { |
| dev_err(dev, "Failed to write IDAC lsb divider: %d\n", ret); |
| return ret; |
| } |
| |
| if (sample_rate <= pcm512x_dac_max(pcm512x, 48000)) |
| fssp = PCM512x_FSSP_48KHZ; |
| else if (sample_rate <= pcm512x_dac_max(pcm512x, 96000)) |
| fssp = PCM512x_FSSP_96KHZ; |
| else if (sample_rate <= pcm512x_dac_max(pcm512x, 192000)) |
| fssp = PCM512x_FSSP_192KHZ; |
| else |
| fssp = PCM512x_FSSP_384KHZ; |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_FS_SPEED_MODE, |
| PCM512x_FSSP, fssp); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to set fs speed: %d\n", ret); |
| return ret; |
| } |
| |
| dev_dbg(component->dev, "DSP divider %d\n", dsp_div); |
| dev_dbg(component->dev, "DAC divider %d\n", dac_div); |
| dev_dbg(component->dev, "NCP divider %d\n", ncp_div); |
| dev_dbg(component->dev, "OSR divider %d\n", osr_div); |
| dev_dbg(component->dev, "BCK divider %d\n", bclk_div); |
| dev_dbg(component->dev, "LRCK divider %d\n", lrclk_div); |
| dev_dbg(component->dev, "IDAC %d\n", idac); |
| dev_dbg(component->dev, "1<<FSSP %d\n", 1 << fssp); |
| |
| return 0; |
| } |
| |
| static int pcm512x_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| int alen; |
| int gpio; |
| int clock_output; |
| int master_mode; |
| int ret; |
| |
| dev_dbg(component->dev, "hw_params %u Hz, %u channels\n", |
| params_rate(params), |
| params_channels(params)); |
| |
| switch (params_width(params)) { |
| case 16: |
| alen = PCM512x_ALEN_16; |
| break; |
| case 20: |
| alen = PCM512x_ALEN_20; |
| break; |
| case 24: |
| alen = PCM512x_ALEN_24; |
| break; |
| case 32: |
| alen = PCM512x_ALEN_32; |
| break; |
| default: |
| dev_err(component->dev, "Bad frame size: %d\n", |
| params_width(params)); |
| return -EINVAL; |
| } |
| |
| switch (pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| ret = regmap_update_bits(pcm512x->regmap, |
| PCM512x_BCLK_LRCLK_CFG, |
| PCM512x_BCKP |
| | PCM512x_BCKO | PCM512x_LRKO, |
| 0); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to enable slave mode: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT, |
| PCM512x_DCAS, 0); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to enable clock divider autoset: %d\n", |
| ret); |
| return ret; |
| } |
| return 0; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| clock_output = PCM512x_BCKO | PCM512x_LRKO; |
| master_mode = PCM512x_RLRK | PCM512x_RBCK; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFS: |
| clock_output = PCM512x_BCKO; |
| master_mode = PCM512x_RBCK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_I2S_1, |
| PCM512x_ALEN, alen); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to set frame size: %d\n", ret); |
| return ret; |
| } |
| |
| if (pcm512x->pll_out) { |
| ret = regmap_write(pcm512x->regmap, PCM512x_FLEX_A, 0x11); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to set FLEX_A: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(pcm512x->regmap, PCM512x_FLEX_B, 0xff); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to set FLEX_B: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT, |
| PCM512x_IDFS | PCM512x_IDBK |
| | PCM512x_IDSK | PCM512x_IDCH |
| | PCM512x_IDCM | PCM512x_DCAS |
| | PCM512x_IPLK, |
| PCM512x_IDFS | PCM512x_IDBK |
| | PCM512x_IDSK | PCM512x_IDCH |
| | PCM512x_DCAS); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to ignore auto-clock failures: %d\n", |
| ret); |
| return ret; |
| } |
| } else { |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT, |
| PCM512x_IDFS | PCM512x_IDBK |
| | PCM512x_IDSK | PCM512x_IDCH |
| | PCM512x_IDCM | PCM512x_DCAS |
| | PCM512x_IPLK, |
| PCM512x_IDFS | PCM512x_IDBK |
| | PCM512x_IDSK | PCM512x_IDCH |
| | PCM512x_DCAS | PCM512x_IPLK); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to ignore auto-clock failures: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_EN, |
| PCM512x_PLLE, 0); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to disable pll: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| ret = pcm512x_set_dividers(dai, params); |
| if (ret != 0) |
| return ret; |
| |
| if (pcm512x->pll_out) { |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_REF, |
| PCM512x_SREF, PCM512x_SREF_GPIO); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to set gpio as pllref: %d\n", ret); |
| return ret; |
| } |
| |
| gpio = PCM512x_GREF_GPIO1 + pcm512x->pll_in - 1; |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_PLLIN, |
| PCM512x_GREF, gpio); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to set gpio %d as pllin: %d\n", |
| pcm512x->pll_in, ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_EN, |
| PCM512x_PLLE, PCM512x_PLLE); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to enable pll: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_BCLK_LRCLK_CFG, |
| PCM512x_BCKP | PCM512x_BCKO | PCM512x_LRKO, |
| clock_output); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to enable clock output: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_MASTER_MODE, |
| PCM512x_RLRK | PCM512x_RBCK, |
| master_mode); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to enable master mode: %d\n", ret); |
| return ret; |
| } |
| |
| if (pcm512x->pll_out) { |
| gpio = PCM512x_G1OE << (pcm512x->pll_out - 1); |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN, |
| gpio, gpio); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to enable gpio %d: %d\n", |
| pcm512x->pll_out, ret); |
| return ret; |
| } |
| |
| gpio = PCM512x_GPIO_OUTPUT_1 + pcm512x->pll_out - 1; |
| ret = regmap_update_bits(pcm512x->regmap, gpio, |
| PCM512x_GxSL, PCM512x_GxSL_PLLCK); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to output pll on %d: %d\n", |
| ret, pcm512x->pll_out); |
| return ret; |
| } |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE, |
| PCM512x_RQSY, PCM512x_RQSY_HALT); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to halt clocks: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE, |
| PCM512x_RQSY, PCM512x_RQSY_RESUME); |
| if (ret != 0) { |
| dev_err(component->dev, "Failed to resume clocks: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int pcm512x_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| pcm512x->fmt = fmt; |
| |
| return 0; |
| } |
| |
| static int pcm512x_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| |
| if (ratio > 256) |
| return -EINVAL; |
| |
| pcm512x->bclk_ratio = ratio; |
| |
| return 0; |
| } |
| |
| static int pcm512x_mute(struct snd_soc_dai *dai, int mute, int direction) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); |
| int ret; |
| unsigned int mute_det; |
| |
| mutex_lock(&pcm512x->mutex); |
| |
| if (mute) { |
| pcm512x->mute |= 0x1; |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_MUTE, |
| PCM512x_RQML | PCM512x_RQMR, |
| PCM512x_RQML | PCM512x_RQMR); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to set digital mute: %d\n", ret); |
| goto unlock; |
| } |
| |
| regmap_read_poll_timeout(pcm512x->regmap, |
| PCM512x_ANALOG_MUTE_DET, |
| mute_det, (mute_det & 0x3) == 0, |
| 200, 10000); |
| } else { |
| pcm512x->mute &= ~0x1; |
| ret = pcm512x_update_mute(pcm512x); |
| if (ret != 0) { |
| dev_err(component->dev, |
| "Failed to update digital mute: %d\n", ret); |
| goto unlock; |
| } |
| |
| regmap_read_poll_timeout(pcm512x->regmap, |
| PCM512x_ANALOG_MUTE_DET, |
| mute_det, |
| (mute_det & 0x3) |
| == ((~pcm512x->mute >> 1) & 0x3), |
| 200, 10000); |
| } |
| |
| unlock: |
| mutex_unlock(&pcm512x->mutex); |
| |
| return ret; |
| } |
| |
| static const struct snd_soc_dai_ops pcm512x_dai_ops = { |
| .startup = pcm512x_dai_startup, |
| .hw_params = pcm512x_hw_params, |
| .set_fmt = pcm512x_set_fmt, |
| .mute_stream = pcm512x_mute, |
| .set_bclk_ratio = pcm512x_set_bclk_ratio, |
| .no_capture_mute = 1, |
| }; |
| |
| static struct snd_soc_dai_driver pcm512x_dai = { |
| .name = "pcm512x-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_CONTINUOUS, |
| .rate_min = 8000, |
| .rate_max = 384000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE | |
| SNDRV_PCM_FMTBIT_S24_LE | |
| SNDRV_PCM_FMTBIT_S32_LE |
| }, |
| .ops = &pcm512x_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver pcm512x_component_driver = { |
| .set_bias_level = pcm512x_set_bias_level, |
| .controls = pcm512x_controls, |
| .num_controls = ARRAY_SIZE(pcm512x_controls), |
| .dapm_widgets = pcm512x_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(pcm512x_dapm_widgets), |
| .dapm_routes = pcm512x_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(pcm512x_dapm_routes), |
| .use_pmdown_time = 1, |
| .endianness = 1, |
| .non_legacy_dai_naming = 1, |
| }; |
| |
| static const struct regmap_range_cfg pcm512x_range = { |
| .name = "Pages", .range_min = PCM512x_VIRT_BASE, |
| .range_max = PCM512x_MAX_REGISTER, |
| .selector_reg = PCM512x_PAGE, |
| .selector_mask = 0xff, |
| .window_start = 0, .window_len = 0x100, |
| }; |
| |
| const struct regmap_config pcm512x_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .readable_reg = pcm512x_readable, |
| .volatile_reg = pcm512x_volatile, |
| |
| .ranges = &pcm512x_range, |
| .num_ranges = 1, |
| |
| .max_register = PCM512x_MAX_REGISTER, |
| .reg_defaults = pcm512x_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(pcm512x_reg_defaults), |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| EXPORT_SYMBOL_GPL(pcm512x_regmap); |
| |
| int pcm512x_probe(struct device *dev, struct regmap *regmap) |
| { |
| struct pcm512x_priv *pcm512x; |
| int i, ret; |
| |
| pcm512x = devm_kzalloc(dev, sizeof(struct pcm512x_priv), GFP_KERNEL); |
| if (!pcm512x) |
| return -ENOMEM; |
| |
| mutex_init(&pcm512x->mutex); |
| |
| dev_set_drvdata(dev, pcm512x); |
| pcm512x->regmap = regmap; |
| |
| for (i = 0; i < ARRAY_SIZE(pcm512x->supplies); i++) |
| pcm512x->supplies[i].supply = pcm512x_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pcm512x->supplies), |
| pcm512x->supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to get supplies: %d\n", ret); |
| return ret; |
| } |
| |
| pcm512x->supply_nb[0].notifier_call = pcm512x_regulator_event_0; |
| pcm512x->supply_nb[1].notifier_call = pcm512x_regulator_event_1; |
| pcm512x->supply_nb[2].notifier_call = pcm512x_regulator_event_2; |
| |
| for (i = 0; i < ARRAY_SIZE(pcm512x->supplies); i++) { |
| ret = devm_regulator_register_notifier( |
| pcm512x->supplies[i].consumer, |
| &pcm512x->supply_nb[i]); |
| if (ret != 0) { |
| dev_err(dev, |
| "Failed to register regulator notifier: %d\n", |
| ret); |
| } |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(pcm512x->supplies), |
| pcm512x->supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| /* Reset the device, verifying I/O in the process for I2C */ |
| ret = regmap_write(regmap, PCM512x_RESET, |
| PCM512x_RSTM | PCM512x_RSTR); |
| if (ret != 0) { |
| dev_err(dev, "Failed to reset device: %d\n", ret); |
| goto err; |
| } |
| |
| ret = regmap_write(regmap, PCM512x_RESET, 0); |
| if (ret != 0) { |
| dev_err(dev, "Failed to reset device: %d\n", ret); |
| goto err; |
| } |
| |
| pcm512x->sclk = devm_clk_get(dev, NULL); |
| if (PTR_ERR(pcm512x->sclk) == -EPROBE_DEFER) { |
| ret = -EPROBE_DEFER; |
| goto err; |
| } |
| if (!IS_ERR(pcm512x->sclk)) { |
| ret = clk_prepare_enable(pcm512x->sclk); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable SCLK: %d\n", ret); |
| goto err; |
| } |
| } |
| |
| /* Default to standby mode */ |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER, |
| PCM512x_RQST, PCM512x_RQST); |
| if (ret != 0) { |
| dev_err(dev, "Failed to request standby: %d\n", |
| ret); |
| goto err_clk; |
| } |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_idle(dev); |
| |
| #ifdef CONFIG_OF |
| if (dev->of_node) { |
| const struct device_node *np = dev->of_node; |
| u32 val; |
| |
| if (of_property_read_u32(np, "pll-in", &val) >= 0) { |
| if (val > 6) { |
| dev_err(dev, "Invalid pll-in\n"); |
| ret = -EINVAL; |
| goto err_clk; |
| } |
| pcm512x->pll_in = val; |
| } |
| |
| if (of_property_read_u32(np, "pll-out", &val) >= 0) { |
| if (val > 6) { |
| dev_err(dev, "Invalid pll-out\n"); |
| ret = -EINVAL; |
| goto err_clk; |
| } |
| pcm512x->pll_out = val; |
| } |
| |
| if (!pcm512x->pll_in != !pcm512x->pll_out) { |
| dev_err(dev, |
| "Error: both pll-in and pll-out, or none\n"); |
| ret = -EINVAL; |
| goto err_clk; |
| } |
| if (pcm512x->pll_in && pcm512x->pll_in == pcm512x->pll_out) { |
| dev_err(dev, "Error: pll-in == pll-out\n"); |
| ret = -EINVAL; |
| goto err_clk; |
| } |
| } |
| #endif |
| |
| ret = devm_snd_soc_register_component(dev, &pcm512x_component_driver, |
| &pcm512x_dai, 1); |
| if (ret != 0) { |
| dev_err(dev, "Failed to register CODEC: %d\n", ret); |
| goto err_pm; |
| } |
| |
| return 0; |
| |
| err_pm: |
| pm_runtime_disable(dev); |
| err_clk: |
| if (!IS_ERR(pcm512x->sclk)) |
| clk_disable_unprepare(pcm512x->sclk); |
| err: |
| regulator_bulk_disable(ARRAY_SIZE(pcm512x->supplies), |
| pcm512x->supplies); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(pcm512x_probe); |
| |
| void pcm512x_remove(struct device *dev) |
| { |
| struct pcm512x_priv *pcm512x = dev_get_drvdata(dev); |
| |
| pm_runtime_disable(dev); |
| if (!IS_ERR(pcm512x->sclk)) |
| clk_disable_unprepare(pcm512x->sclk); |
| regulator_bulk_disable(ARRAY_SIZE(pcm512x->supplies), |
| pcm512x->supplies); |
| } |
| EXPORT_SYMBOL_GPL(pcm512x_remove); |
| |
| #ifdef CONFIG_PM |
| static int pcm512x_suspend(struct device *dev) |
| { |
| struct pcm512x_priv *pcm512x = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER, |
| PCM512x_RQPD, PCM512x_RQPD); |
| if (ret != 0) { |
| dev_err(dev, "Failed to request power down: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_disable(ARRAY_SIZE(pcm512x->supplies), |
| pcm512x->supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to disable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| if (!IS_ERR(pcm512x->sclk)) |
| clk_disable_unprepare(pcm512x->sclk); |
| |
| return 0; |
| } |
| |
| static int pcm512x_resume(struct device *dev) |
| { |
| struct pcm512x_priv *pcm512x = dev_get_drvdata(dev); |
| int ret; |
| |
| if (!IS_ERR(pcm512x->sclk)) { |
| ret = clk_prepare_enable(pcm512x->sclk); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable SCLK: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(pcm512x->supplies), |
| pcm512x->supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| regcache_cache_only(pcm512x->regmap, false); |
| ret = regcache_sync(pcm512x->regmap); |
| if (ret != 0) { |
| dev_err(dev, "Failed to sync cache: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER, |
| PCM512x_RQPD, 0); |
| if (ret != 0) { |
| dev_err(dev, "Failed to remove power down: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| const struct dev_pm_ops pcm512x_pm_ops = { |
| SET_RUNTIME_PM_OPS(pcm512x_suspend, pcm512x_resume, NULL) |
| }; |
| EXPORT_SYMBOL_GPL(pcm512x_pm_ops); |
| |
| MODULE_DESCRIPTION("ASoC PCM512x codec driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@kernel.org>"); |
| MODULE_LICENSE("GPL v2"); |