Documentation/devicetree/bindings/clock/imx5-clock.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Clock bindings for Freescale i.MX5

maintainers:
  - Fabio Estevam <festevam@gmail.com>

description: |
  The clock consumer should specify the desired clock by having the clock
  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
  for the full list of i.MX5 clock IDs.

properties:
  compatible:
    enum:
      - fsl,imx53-ccm
      - fsl,imx51-ccm
      - fsl,imx50-ccm

  reg:
    maxItems: 1

  interrupts:
    description: CCM provides 2 interrupt requests, request 1 is to generate
      interrupt for frequency or mux change, request 2 is to generate
      interrupt for oscillator read or PLL lock.
    items:
      - description: CCM interrupt request 1
      - description: CCM interrupt request 2

  '#clock-cells':
    const: 1

required:
  - compatible
  - reg
  - interrupts
  - '#clock-cells'

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/imx5-clock.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    clock-controller@53fd4000{
        compatible = "fsl,imx53-ccm";
        reg = <0x53fd4000 0x4000>;
        interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
                     <0 72 IRQ_TYPE_LEVEL_HIGH>;
        #clock-cells = <1>;
    };

    can@53fc8000 {
        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
        reg = <0x53fc8000 0x4000>;
        interrupts = <82>;
        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
        clock-names = "ipg", "per";
    };