| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Data Object Exchange |
| * PCIe r6.0, sec 6.30 DOE |
| * |
| * Copyright (C) 2021 Huawei |
| * Jonathan Cameron <Jonathan.Cameron@huawei.com> |
| * |
| * Copyright (C) 2022 Intel Corporation |
| * Ira Weiny <ira.weiny@intel.com> |
| */ |
| |
| #define dev_fmt(fmt) "DOE: " fmt |
| |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/pci-doe.h> |
| #include <linux/workqueue.h> |
| |
| #include "pci.h" |
| |
| #define PCI_DOE_PROTOCOL_DISCOVERY 0 |
| |
| /* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */ |
| #define PCI_DOE_TIMEOUT HZ |
| #define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128) |
| |
| #define PCI_DOE_FLAG_CANCEL 0 |
| #define PCI_DOE_FLAG_DEAD 1 |
| |
| /* Max data object length is 2^18 dwords */ |
| #define PCI_DOE_MAX_LENGTH (1 << 18) |
| |
| /** |
| * struct pci_doe_mb - State for a single DOE mailbox |
| * |
| * This state is used to manage a single DOE mailbox capability. All fields |
| * should be considered opaque to the consumers and the structure passed into |
| * the helpers below after being created by pci_doe_create_mb(). |
| * |
| * @pdev: PCI device this mailbox belongs to |
| * @cap_offset: Capability offset |
| * @prots: Array of protocols supported (encoded as long values) |
| * @wq: Wait queue for work item |
| * @work_queue: Queue of pci_doe_work items |
| * @flags: Bit array of PCI_DOE_FLAG_* flags |
| */ |
| struct pci_doe_mb { |
| struct pci_dev *pdev; |
| u16 cap_offset; |
| struct xarray prots; |
| |
| wait_queue_head_t wq; |
| struct workqueue_struct *work_queue; |
| unsigned long flags; |
| }; |
| |
| struct pci_doe_protocol { |
| u16 vid; |
| u8 type; |
| }; |
| |
| /** |
| * struct pci_doe_task - represents a single query/response |
| * |
| * @prot: DOE Protocol |
| * @request_pl: The request payload |
| * @request_pl_sz: Size of the request payload (bytes) |
| * @response_pl: The response payload |
| * @response_pl_sz: Size of the response payload (bytes) |
| * @rv: Return value. Length of received response or error (bytes) |
| * @complete: Called when task is complete |
| * @private: Private data for the consumer |
| * @work: Used internally by the mailbox |
| * @doe_mb: Used internally by the mailbox |
| */ |
| struct pci_doe_task { |
| struct pci_doe_protocol prot; |
| const __le32 *request_pl; |
| size_t request_pl_sz; |
| __le32 *response_pl; |
| size_t response_pl_sz; |
| int rv; |
| void (*complete)(struct pci_doe_task *task); |
| void *private; |
| |
| /* initialized by pci_doe_submit_task() */ |
| struct work_struct work; |
| struct pci_doe_mb *doe_mb; |
| }; |
| |
| static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout) |
| { |
| if (wait_event_timeout(doe_mb->wq, |
| test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags), |
| timeout)) |
| return -EIO; |
| return 0; |
| } |
| |
| static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| |
| pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val); |
| } |
| |
| static int pci_doe_abort(struct pci_doe_mb *doe_mb) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| unsigned long timeout_jiffies; |
| |
| pci_dbg(pdev, "[%x] Issuing Abort\n", offset); |
| |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; |
| pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT); |
| |
| do { |
| int rc; |
| u32 val; |
| |
| rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); |
| if (rc) |
| return rc; |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| |
| /* Abort success! */ |
| if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) && |
| !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) |
| return 0; |
| |
| } while (!time_after(jiffies, timeout_jiffies)); |
| |
| /* Abort has timed out and the MB is dead */ |
| pci_err(pdev, "[%x] ABORT timed out\n", offset); |
| return -EIO; |
| } |
| |
| static int pci_doe_send_req(struct pci_doe_mb *doe_mb, |
| struct pci_doe_task *task) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| size_t length, remainder; |
| u32 val; |
| int i; |
| |
| /* |
| * Check the DOE busy bit is not set. If it is set, this could indicate |
| * someone other than Linux (e.g. firmware) is using the mailbox. Note |
| * it is expected that firmware and OS will negotiate access rights via |
| * an, as yet to be defined, method. |
| */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_BUSY, val)) |
| return -EBUSY; |
| |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) |
| return -EIO; |
| |
| /* Length is 2 DW of header + length of payload in DW */ |
| length = 2 + DIV_ROUND_UP(task->request_pl_sz, sizeof(__le32)); |
| if (length > PCI_DOE_MAX_LENGTH) |
| return -EIO; |
| if (length == PCI_DOE_MAX_LENGTH) |
| length = 0; |
| |
| /* Write DOE Header */ |
| val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) | |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type); |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, |
| length)); |
| |
| /* Write payload */ |
| for (i = 0; i < task->request_pl_sz / sizeof(__le32); i++) |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, |
| le32_to_cpu(task->request_pl[i])); |
| |
| /* Write last payload dword */ |
| remainder = task->request_pl_sz % sizeof(__le32); |
| if (remainder) { |
| val = 0; |
| memcpy(&val, &task->request_pl[i], remainder); |
| le32_to_cpus(&val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); |
| } |
| |
| pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO); |
| |
| return 0; |
| } |
| |
| static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| u32 val; |
| |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) |
| return true; |
| return false; |
| } |
| |
| static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) |
| { |
| size_t length, payload_length, remainder, received; |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| int i = 0; |
| u32 val; |
| |
| /* Read the first dword to get the protocol */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) || |
| (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) { |
| dev_err_ratelimited(&pdev->dev, "[%x] expected [VID, Protocol] = [%04x, %02x], got [%04x, %02x]\n", |
| doe_mb->cap_offset, task->prot.vid, task->prot.type, |
| FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val), |
| FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val)); |
| return -EIO; |
| } |
| |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| /* Read the second dword to get the length */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| |
| length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val); |
| /* A value of 0x0 indicates max data object length */ |
| if (!length) |
| length = PCI_DOE_MAX_LENGTH; |
| if (length < 2) |
| return -EIO; |
| |
| /* First 2 dwords have already been read */ |
| length -= 2; |
| received = task->response_pl_sz; |
| payload_length = DIV_ROUND_UP(task->response_pl_sz, sizeof(__le32)); |
| remainder = task->response_pl_sz % sizeof(__le32); |
| |
| /* remainder signifies number of data bytes in last payload dword */ |
| if (!remainder) |
| remainder = sizeof(__le32); |
| |
| if (length < payload_length) { |
| received = length * sizeof(__le32); |
| payload_length = length; |
| remainder = sizeof(__le32); |
| } |
| |
| if (payload_length) { |
| /* Read all payload dwords except the last */ |
| for (; i < payload_length - 1; i++) { |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, |
| &val); |
| task->response_pl[i] = cpu_to_le32(val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| } |
| |
| /* Read last payload dword */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| cpu_to_le32s(&val); |
| memcpy(&task->response_pl[i], &val, remainder); |
| /* Prior to the last ack, ensure Data Object Ready */ |
| if (!pci_doe_data_obj_ready(doe_mb)) |
| return -EIO; |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| i++; |
| } |
| |
| /* Flush excess length */ |
| for (; i < length; i++) { |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| } |
| |
| /* Final error check to pick up on any since Data Object Ready */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) |
| return -EIO; |
| |
| return received; |
| } |
| |
| static void signal_task_complete(struct pci_doe_task *task, int rv) |
| { |
| task->rv = rv; |
| destroy_work_on_stack(&task->work); |
| task->complete(task); |
| } |
| |
| static void signal_task_abort(struct pci_doe_task *task, int rv) |
| { |
| struct pci_doe_mb *doe_mb = task->doe_mb; |
| struct pci_dev *pdev = doe_mb->pdev; |
| |
| if (pci_doe_abort(doe_mb)) { |
| /* |
| * If the device can't process an abort; set the mailbox dead |
| * - no more submissions |
| */ |
| pci_err(pdev, "[%x] Abort failed marking mailbox dead\n", |
| doe_mb->cap_offset); |
| set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); |
| } |
| signal_task_complete(task, rv); |
| } |
| |
| static void doe_statemachine_work(struct work_struct *work) |
| { |
| struct pci_doe_task *task = container_of(work, struct pci_doe_task, |
| work); |
| struct pci_doe_mb *doe_mb = task->doe_mb; |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| unsigned long timeout_jiffies; |
| u32 val; |
| int rc; |
| |
| if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) { |
| signal_task_complete(task, -EIO); |
| return; |
| } |
| |
| /* Send request */ |
| rc = pci_doe_send_req(doe_mb, task); |
| if (rc) { |
| /* |
| * The specification does not provide any guidance on how to |
| * resolve conflicting requests from other entities. |
| * Furthermore, it is likely that busy will not be detected |
| * most of the time. Flag any detection of status busy with an |
| * error. |
| */ |
| if (rc == -EBUSY) |
| dev_err_ratelimited(&pdev->dev, "[%x] busy detected; another entity is sending conflicting requests\n", |
| offset); |
| signal_task_abort(task, rc); |
| return; |
| } |
| |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; |
| /* Poll for response */ |
| retry_resp: |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) { |
| signal_task_abort(task, -EIO); |
| return; |
| } |
| |
| if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) { |
| if (time_after(jiffies, timeout_jiffies)) { |
| signal_task_abort(task, -EIO); |
| return; |
| } |
| rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); |
| if (rc) { |
| signal_task_abort(task, rc); |
| return; |
| } |
| goto retry_resp; |
| } |
| |
| rc = pci_doe_recv_resp(doe_mb, task); |
| if (rc < 0) { |
| signal_task_abort(task, rc); |
| return; |
| } |
| |
| signal_task_complete(task, rc); |
| } |
| |
| static void pci_doe_task_complete(struct pci_doe_task *task) |
| { |
| complete(task->private); |
| } |
| |
| static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 capver, u8 *index, u16 *vid, |
| u8 *protocol) |
| { |
| u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX, |
| *index) | |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_VER, |
| (capver >= 2) ? 2 : 0); |
| __le32 request_pl_le = cpu_to_le32(request_pl); |
| __le32 response_pl_le; |
| u32 response_pl; |
| int rc; |
| |
| rc = pci_doe(doe_mb, PCI_VENDOR_ID_PCI_SIG, PCI_DOE_PROTOCOL_DISCOVERY, |
| &request_pl_le, sizeof(request_pl_le), |
| &response_pl_le, sizeof(response_pl_le)); |
| if (rc < 0) |
| return rc; |
| |
| if (rc != sizeof(response_pl_le)) |
| return -EIO; |
| |
| response_pl = le32_to_cpu(response_pl_le); |
| *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl); |
| *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL, |
| response_pl); |
| *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX, |
| response_pl); |
| |
| return 0; |
| } |
| |
| static void *pci_doe_xa_prot_entry(u16 vid, u8 prot) |
| { |
| return xa_mk_value((vid << 8) | prot); |
| } |
| |
| static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb) |
| { |
| u8 index = 0; |
| u8 xa_idx = 0; |
| u32 hdr = 0; |
| |
| pci_read_config_dword(doe_mb->pdev, doe_mb->cap_offset, &hdr); |
| |
| do { |
| int rc; |
| u16 vid; |
| u8 prot; |
| |
| rc = pci_doe_discovery(doe_mb, PCI_EXT_CAP_VER(hdr), &index, |
| &vid, &prot); |
| if (rc) |
| return rc; |
| |
| pci_dbg(doe_mb->pdev, |
| "[%x] Found protocol %d vid: %x prot: %x\n", |
| doe_mb->cap_offset, xa_idx, vid, prot); |
| |
| rc = xa_insert(&doe_mb->prots, xa_idx++, |
| pci_doe_xa_prot_entry(vid, prot), GFP_KERNEL); |
| if (rc) |
| return rc; |
| } while (index); |
| |
| return 0; |
| } |
| |
| static void pci_doe_cancel_tasks(struct pci_doe_mb *doe_mb) |
| { |
| /* Stop all pending work items from starting */ |
| set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); |
| |
| /* Cancel an in progress work item, if necessary */ |
| set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags); |
| wake_up(&doe_mb->wq); |
| } |
| |
| /** |
| * pci_doe_create_mb() - Create a DOE mailbox object |
| * |
| * @pdev: PCI device to create the DOE mailbox for |
| * @cap_offset: Offset of the DOE mailbox |
| * |
| * Create a single mailbox object to manage the mailbox protocol at the |
| * cap_offset specified. |
| * |
| * RETURNS: created mailbox object on success |
| * ERR_PTR(-errno) on failure |
| */ |
| static struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, |
| u16 cap_offset) |
| { |
| struct pci_doe_mb *doe_mb; |
| int rc; |
| |
| doe_mb = kzalloc(sizeof(*doe_mb), GFP_KERNEL); |
| if (!doe_mb) |
| return ERR_PTR(-ENOMEM); |
| |
| doe_mb->pdev = pdev; |
| doe_mb->cap_offset = cap_offset; |
| init_waitqueue_head(&doe_mb->wq); |
| xa_init(&doe_mb->prots); |
| |
| doe_mb->work_queue = alloc_ordered_workqueue("%s %s DOE [%x]", 0, |
| dev_bus_name(&pdev->dev), |
| pci_name(pdev), |
| doe_mb->cap_offset); |
| if (!doe_mb->work_queue) { |
| pci_err(pdev, "[%x] failed to allocate work queue\n", |
| doe_mb->cap_offset); |
| rc = -ENOMEM; |
| goto err_free; |
| } |
| |
| /* Reset the mailbox by issuing an abort */ |
| rc = pci_doe_abort(doe_mb); |
| if (rc) { |
| pci_err(pdev, "[%x] failed to reset mailbox with abort command : %d\n", |
| doe_mb->cap_offset, rc); |
| goto err_destroy_wq; |
| } |
| |
| /* |
| * The state machine and the mailbox should be in sync now; |
| * Use the mailbox to query protocols. |
| */ |
| rc = pci_doe_cache_protocols(doe_mb); |
| if (rc) { |
| pci_err(pdev, "[%x] failed to cache protocols : %d\n", |
| doe_mb->cap_offset, rc); |
| goto err_cancel; |
| } |
| |
| return doe_mb; |
| |
| err_cancel: |
| pci_doe_cancel_tasks(doe_mb); |
| xa_destroy(&doe_mb->prots); |
| err_destroy_wq: |
| destroy_workqueue(doe_mb->work_queue); |
| err_free: |
| kfree(doe_mb); |
| return ERR_PTR(rc); |
| } |
| |
| /** |
| * pci_doe_destroy_mb() - Destroy a DOE mailbox object |
| * |
| * @doe_mb: DOE mailbox |
| * |
| * Destroy all internal data structures created for the DOE mailbox. |
| */ |
| static void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb) |
| { |
| pci_doe_cancel_tasks(doe_mb); |
| xa_destroy(&doe_mb->prots); |
| destroy_workqueue(doe_mb->work_queue); |
| kfree(doe_mb); |
| } |
| |
| /** |
| * pci_doe_supports_prot() - Return if the DOE instance supports the given |
| * protocol |
| * @doe_mb: DOE mailbox capability to query |
| * @vid: Protocol Vendor ID |
| * @type: Protocol type |
| * |
| * RETURNS: True if the DOE mailbox supports the protocol specified |
| */ |
| static bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type) |
| { |
| unsigned long index; |
| void *entry; |
| |
| /* The discovery protocol must always be supported */ |
| if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY) |
| return true; |
| |
| xa_for_each(&doe_mb->prots, index, entry) |
| if (entry == pci_doe_xa_prot_entry(vid, type)) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * pci_doe_submit_task() - Submit a task to be processed by the state machine |
| * |
| * @doe_mb: DOE mailbox capability to submit to |
| * @task: task to be queued |
| * |
| * Submit a DOE task (request/response) to the DOE mailbox to be processed. |
| * Returns upon queueing the task object. If the queue is full this function |
| * will sleep until there is room in the queue. |
| * |
| * task->complete will be called when the state machine is done processing this |
| * task. |
| * |
| * @task must be allocated on the stack. |
| * |
| * Excess data will be discarded. |
| * |
| * RETURNS: 0 when task has been successfully queued, -ERRNO on error |
| */ |
| static int pci_doe_submit_task(struct pci_doe_mb *doe_mb, |
| struct pci_doe_task *task) |
| { |
| if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type)) |
| return -EINVAL; |
| |
| if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) |
| return -EIO; |
| |
| task->doe_mb = doe_mb; |
| INIT_WORK_ONSTACK(&task->work, doe_statemachine_work); |
| queue_work(doe_mb->work_queue, &task->work); |
| return 0; |
| } |
| |
| /** |
| * pci_doe() - Perform Data Object Exchange |
| * |
| * @doe_mb: DOE Mailbox |
| * @vendor: Vendor ID |
| * @type: Data Object Type |
| * @request: Request payload |
| * @request_sz: Size of request payload (bytes) |
| * @response: Response payload |
| * @response_sz: Size of response payload (bytes) |
| * |
| * Submit @request to @doe_mb and store the @response. |
| * The DOE exchange is performed synchronously and may therefore sleep. |
| * |
| * Payloads are treated as opaque byte streams which are transmitted verbatim, |
| * without byte-swapping. If payloads contain little-endian register values, |
| * the caller is responsible for conversion with cpu_to_le32() / le32_to_cpu(). |
| * |
| * For convenience, arbitrary payload sizes are allowed even though PCIe r6.0 |
| * sec 6.30.1 specifies the Data Object Header 2 "Length" in dwords. The last |
| * (partial) dword is copied with byte granularity and padded with zeroes if |
| * necessary. Callers are thus relieved of using dword-sized bounce buffers. |
| * |
| * RETURNS: Length of received response or negative errno. |
| * Received data in excess of @response_sz is discarded. |
| * The length may be smaller than @response_sz and the caller |
| * is responsible for checking that. |
| */ |
| int pci_doe(struct pci_doe_mb *doe_mb, u16 vendor, u8 type, |
| const void *request, size_t request_sz, |
| void *response, size_t response_sz) |
| { |
| DECLARE_COMPLETION_ONSTACK(c); |
| struct pci_doe_task task = { |
| .prot.vid = vendor, |
| .prot.type = type, |
| .request_pl = request, |
| .request_pl_sz = request_sz, |
| .response_pl = response, |
| .response_pl_sz = response_sz, |
| .complete = pci_doe_task_complete, |
| .private = &c, |
| }; |
| int rc; |
| |
| rc = pci_doe_submit_task(doe_mb, &task); |
| if (rc) |
| return rc; |
| |
| wait_for_completion(&c); |
| |
| return task.rv; |
| } |
| EXPORT_SYMBOL_GPL(pci_doe); |
| |
| /** |
| * pci_find_doe_mailbox() - Find Data Object Exchange mailbox |
| * |
| * @pdev: PCI device |
| * @vendor: Vendor ID |
| * @type: Data Object Type |
| * |
| * Find first DOE mailbox of a PCI device which supports the given protocol. |
| * |
| * RETURNS: Pointer to the DOE mailbox or NULL if none was found. |
| */ |
| struct pci_doe_mb *pci_find_doe_mailbox(struct pci_dev *pdev, u16 vendor, |
| u8 type) |
| { |
| struct pci_doe_mb *doe_mb; |
| unsigned long index; |
| |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) |
| if (pci_doe_supports_prot(doe_mb, vendor, type)) |
| return doe_mb; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(pci_find_doe_mailbox); |
| |
| void pci_doe_init(struct pci_dev *pdev) |
| { |
| struct pci_doe_mb *doe_mb; |
| u16 offset = 0; |
| int rc; |
| |
| xa_init(&pdev->doe_mbs); |
| |
| while ((offset = pci_find_next_ext_capability(pdev, offset, |
| PCI_EXT_CAP_ID_DOE))) { |
| doe_mb = pci_doe_create_mb(pdev, offset); |
| if (IS_ERR(doe_mb)) { |
| pci_err(pdev, "[%x] failed to create mailbox: %ld\n", |
| offset, PTR_ERR(doe_mb)); |
| continue; |
| } |
| |
| rc = xa_insert(&pdev->doe_mbs, offset, doe_mb, GFP_KERNEL); |
| if (rc) { |
| pci_err(pdev, "[%x] failed to insert mailbox: %d\n", |
| offset, rc); |
| pci_doe_destroy_mb(doe_mb); |
| } |
| } |
| } |
| |
| void pci_doe_destroy(struct pci_dev *pdev) |
| { |
| struct pci_doe_mb *doe_mb; |
| unsigned long index; |
| |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) |
| pci_doe_destroy_mb(doe_mb); |
| |
| xa_destroy(&pdev->doe_mbs); |
| } |
| |
| void pci_doe_disconnected(struct pci_dev *pdev) |
| { |
| struct pci_doe_mb *doe_mb; |
| unsigned long index; |
| |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) |
| pci_doe_cancel_tasks(doe_mb); |
| } |