| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver |
| * |
| * Copyright (C) 2016 David Lechner <david@lechnology.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/mfd/da8xx-cfgchip.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_data/phy-da8xx-usb.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| |
| #define PHY_INIT_BITS (CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN) |
| |
| struct da8xx_usb_phy { |
| struct device *dev; |
| struct phy_provider *phy_provider; |
| struct phy *usb11_phy; |
| struct phy *usb20_phy; |
| struct clk *usb11_clk; |
| struct clk *usb20_clk; |
| struct regmap *regmap; |
| }; |
| |
| static int da8xx_usb11_phy_power_on(struct phy *phy) |
| { |
| struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = clk_prepare_enable(d_phy->usb11_clk); |
| if (ret) |
| return ret; |
| |
| regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, |
| CFGCHIP2_USB1SUSPENDM); |
| |
| /* |
| * USB1.1 can used USB2.0 output clock as reference clock so this is here to prevent USB2.0 |
| * from shutting PHY's power when USB1.1 might use it |
| */ |
| pm_runtime_get_sync(d_phy->dev); |
| |
| return 0; |
| } |
| |
| static int da8xx_usb11_phy_power_off(struct phy *phy) |
| { |
| struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy); |
| |
| regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0); |
| |
| clk_disable_unprepare(d_phy->usb11_clk); |
| pm_runtime_put_sync(d_phy->dev); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops da8xx_usb11_phy_ops = { |
| .power_on = da8xx_usb11_phy_power_on, |
| .power_off = da8xx_usb11_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int da8xx_usb20_phy_power_on(struct phy *phy) |
| { |
| struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = clk_prepare_enable(d_phy->usb20_clk); |
| if (ret) |
| return ret; |
| |
| regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0); |
| |
| return 0; |
| } |
| |
| static int da8xx_usb20_phy_power_off(struct phy *phy) |
| { |
| struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy); |
| |
| regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, |
| CFGCHIP2_OTGPWRDN); |
| |
| clk_disable_unprepare(d_phy->usb20_clk); |
| |
| return 0; |
| } |
| |
| static int da8xx_usb20_phy_set_mode(struct phy *phy, |
| enum phy_mode mode, int submode) |
| { |
| struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy); |
| u32 val; |
| |
| switch (mode) { |
| case PHY_MODE_USB_HOST: /* Force VBUS valid, ID = 0 */ |
| val = CFGCHIP2_OTGMODE_FORCE_HOST; |
| break; |
| case PHY_MODE_USB_DEVICE: /* Force VBUS valid, ID = 1 */ |
| val = CFGCHIP2_OTGMODE_FORCE_DEVICE; |
| break; |
| case PHY_MODE_USB_OTG: /* Don't override the VBUS/ID comparators */ |
| val = CFGCHIP2_OTGMODE_NO_OVERRIDE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK, |
| val); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops da8xx_usb20_phy_ops = { |
| .power_on = da8xx_usb20_phy_power_on, |
| .power_off = da8xx_usb20_phy_power_off, |
| .set_mode = da8xx_usb20_phy_set_mode, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int __maybe_unused da8xx_runtime_suspend(struct device *dev) |
| { |
| struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "Suspending ...\n"); |
| |
| regmap_set_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused da8xx_runtime_resume(struct device *dev) |
| { |
| u32 mask = CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_PHY_PLLON; |
| struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev); |
| u32 pll_status; |
| |
| regmap_update_bits(d_phy->regmap, CFGCHIP(2), mask, CFGCHIP2_PHY_PLLON); |
| |
| dev_dbg(dev, "Resuming ...\n"); |
| |
| return regmap_read_poll_timeout(d_phy->regmap, CFGCHIP(2), pll_status, |
| pll_status & CFGCHIP2_PHYCLKGD, 1000, 500000); |
| } |
| |
| static const struct dev_pm_ops da8xx_usb_phy_pm_ops = { |
| SET_RUNTIME_PM_OPS(da8xx_runtime_suspend, da8xx_runtime_resume, NULL) |
| }; |
| |
| static struct phy *da8xx_usb_phy_of_xlate(struct device *dev, |
| const struct of_phandle_args *args) |
| { |
| struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev); |
| |
| if (!d_phy) |
| return ERR_PTR(-ENODEV); |
| |
| switch (args->args[0]) { |
| case 0: |
| return d_phy->usb20_phy; |
| case 1: |
| return d_phy->usb11_phy; |
| default: |
| return ERR_PTR(-EINVAL); |
| } |
| } |
| |
| static int da8xx_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct da8xx_usb_phy_platform_data *pdata = dev->platform_data; |
| struct device_node *node = dev->of_node; |
| struct da8xx_usb_phy *d_phy; |
| |
| d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL); |
| if (!d_phy) |
| return -ENOMEM; |
| |
| d_phy->dev = dev; |
| |
| if (pdata) |
| d_phy->regmap = pdata->cfgchip; |
| else |
| d_phy->regmap = syscon_regmap_lookup_by_compatible( |
| "ti,da830-cfgchip"); |
| if (IS_ERR(d_phy->regmap)) { |
| dev_err(dev, "Failed to get syscon\n"); |
| return PTR_ERR(d_phy->regmap); |
| } |
| |
| d_phy->usb11_clk = devm_clk_get(dev, "usb1_clk48"); |
| if (IS_ERR(d_phy->usb11_clk)) { |
| dev_err(dev, "Failed to get usb1_clk48\n"); |
| return PTR_ERR(d_phy->usb11_clk); |
| } |
| |
| d_phy->usb20_clk = devm_clk_get(dev, "usb0_clk48"); |
| if (IS_ERR(d_phy->usb20_clk)) { |
| dev_err(dev, "Failed to get usb0_clk48\n"); |
| return PTR_ERR(d_phy->usb20_clk); |
| } |
| |
| d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops); |
| if (IS_ERR(d_phy->usb11_phy)) { |
| dev_err(dev, "Failed to create usb11 phy\n"); |
| return PTR_ERR(d_phy->usb11_phy); |
| } |
| |
| d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops); |
| if (IS_ERR(d_phy->usb20_phy)) { |
| dev_err(dev, "Failed to create usb20 phy\n"); |
| return PTR_ERR(d_phy->usb20_phy); |
| } |
| |
| platform_set_drvdata(pdev, d_phy); |
| phy_set_drvdata(d_phy->usb11_phy, d_phy); |
| phy_set_drvdata(d_phy->usb20_phy, d_phy); |
| |
| if (node) { |
| d_phy->phy_provider = devm_of_phy_provider_register(dev, |
| da8xx_usb_phy_of_xlate); |
| if (IS_ERR(d_phy->phy_provider)) { |
| dev_err(dev, "Failed to create phy provider\n"); |
| return PTR_ERR(d_phy->phy_provider); |
| } |
| } else { |
| int ret; |
| |
| ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", |
| "ohci-da8xx"); |
| if (ret) |
| dev_warn(dev, "Failed to create usb11 phy lookup\n"); |
| ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy", |
| "musb-da8xx"); |
| if (ret) |
| dev_warn(dev, "Failed to create usb20 phy lookup\n"); |
| } |
| |
| regmap_write_bits(d_phy->regmap, CFGCHIP(2), |
| PHY_INIT_BITS, PHY_INIT_BITS); |
| |
| pm_runtime_set_active(dev); |
| devm_pm_runtime_enable(dev); |
| /* |
| * Prevent runtime pm from being ON by default. Users can enable |
| * it using power/control in sysfs. |
| */ |
| pm_runtime_forbid(dev); |
| |
| return 0; |
| } |
| |
| static void da8xx_usb_phy_remove(struct platform_device *pdev) |
| { |
| struct da8xx_usb_phy *d_phy = platform_get_drvdata(pdev); |
| |
| if (!pdev->dev.of_node) { |
| phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx"); |
| phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx"); |
| } |
| } |
| |
| static const struct of_device_id da8xx_usb_phy_ids[] = { |
| { .compatible = "ti,da830-usb-phy" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, da8xx_usb_phy_ids); |
| |
| static struct platform_driver da8xx_usb_phy_driver = { |
| .probe = da8xx_usb_phy_probe, |
| .remove_new = da8xx_usb_phy_remove, |
| .driver = { |
| .name = "da8xx-usb-phy", |
| .pm = &da8xx_usb_phy_pm_ops, |
| .of_match_table = da8xx_usb_phy_ids, |
| }, |
| }; |
| |
| module_platform_driver(da8xx_usb_phy_driver); |
| |
| MODULE_ALIAS("platform:da8xx-usb-phy"); |
| MODULE_AUTHOR("David Lechner <david@lechnology.com>"); |
| MODULE_DESCRIPTION("TI DA8xx USB PHY driver"); |
| MODULE_LICENSE("GPL v2"); |