| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * isl9305 - Intersil ISL9305 DCDC regulator |
| * |
| * Copyright 2014 Linaro Ltd |
| * |
| * Author: Mark Brown <broonie@kernel.org> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/of.h> |
| #include <linux/platform_data/isl9305.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/slab.h> |
| |
| /* |
| * Registers |
| */ |
| #define ISL9305_DCD1OUT 0x0 |
| #define ISL9305_DCD2OUT 0x1 |
| #define ISL9305_LDO1OUT 0x2 |
| #define ISL9305_LDO2OUT 0x3 |
| #define ISL9305_DCD_PARAMETER 0x4 |
| #define ISL9305_SYSTEM_PARAMETER 0x5 |
| #define ISL9305_DCD_SRCTL 0x6 |
| |
| #define ISL9305_MAX_REG ISL9305_DCD_SRCTL |
| |
| /* |
| * DCD_PARAMETER |
| */ |
| #define ISL9305_DCD_PHASE 0x40 |
| #define ISL9305_DCD2_ULTRA 0x20 |
| #define ISL9305_DCD1_ULTRA 0x10 |
| #define ISL9305_DCD2_BLD 0x08 |
| #define ISL9305_DCD1_BLD 0x04 |
| #define ISL9305_DCD2_MODE 0x02 |
| #define ISL9305_DCD1_MODE 0x01 |
| |
| /* |
| * SYSTEM_PARAMETER |
| */ |
| #define ISL9305_I2C_EN 0x40 |
| #define ISL9305_DCDPOR_MASK 0x30 |
| #define ISL9305_LDO2_EN 0x08 |
| #define ISL9305_LDO1_EN 0x04 |
| #define ISL9305_DCD2_EN 0x02 |
| #define ISL9305_DCD1_EN 0x01 |
| |
| /* |
| * DCD_SRCTL |
| */ |
| #define ISL9305_DCD2SR_MASK 0xc0 |
| #define ISL9305_DCD1SR_MASK 0x07 |
| |
| static const struct regulator_ops isl9305_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_desc isl9305_regulators[] = { |
| [ISL9305_DCD1] = { |
| .name = "DCD1", |
| .of_match = of_match_ptr("dcd1"), |
| .regulators_node = of_match_ptr("regulators"), |
| .n_voltages = 0x70, |
| .min_uV = 825000, |
| .uV_step = 25000, |
| .vsel_reg = ISL9305_DCD1OUT, |
| .vsel_mask = 0x7f, |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, |
| .enable_mask = ISL9305_DCD1_EN, |
| .supply_name = "VINDCD1", |
| .ops = &isl9305_ops, |
| .owner = THIS_MODULE, |
| }, |
| [ISL9305_DCD2] = { |
| .name = "DCD2", |
| .of_match = of_match_ptr("dcd2"), |
| .regulators_node = of_match_ptr("regulators"), |
| .n_voltages = 0x70, |
| .min_uV = 825000, |
| .uV_step = 25000, |
| .vsel_reg = ISL9305_DCD2OUT, |
| .vsel_mask = 0x7f, |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, |
| .enable_mask = ISL9305_DCD2_EN, |
| .supply_name = "VINDCD2", |
| .ops = &isl9305_ops, |
| .owner = THIS_MODULE, |
| }, |
| [ISL9305_LDO1] = { |
| .name = "LDO1", |
| .of_match = of_match_ptr("ldo1"), |
| .regulators_node = of_match_ptr("regulators"), |
| .n_voltages = 0x37, |
| .min_uV = 900000, |
| .uV_step = 50000, |
| .vsel_reg = ISL9305_LDO1OUT, |
| .vsel_mask = 0x3f, |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, |
| .enable_mask = ISL9305_LDO1_EN, |
| .supply_name = "VINLDO1", |
| .ops = &isl9305_ops, |
| .owner = THIS_MODULE, |
| }, |
| [ISL9305_LDO2] = { |
| .name = "LDO2", |
| .of_match = of_match_ptr("ldo2"), |
| .regulators_node = of_match_ptr("regulators"), |
| .n_voltages = 0x37, |
| .min_uV = 900000, |
| .uV_step = 50000, |
| .vsel_reg = ISL9305_LDO2OUT, |
| .vsel_mask = 0x3f, |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, |
| .enable_mask = ISL9305_LDO2_EN, |
| .supply_name = "VINLDO2", |
| .ops = &isl9305_ops, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static const struct regmap_config isl9305_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = ISL9305_MAX_REG, |
| .cache_type = REGCACHE_MAPLE, |
| }; |
| |
| static int isl9305_i2c_probe(struct i2c_client *i2c) |
| { |
| struct regulator_config config = { }; |
| struct isl9305_pdata *pdata = i2c->dev.platform_data; |
| struct regulator_dev *rdev; |
| struct regmap *regmap; |
| int i, ret; |
| |
| regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap); |
| if (IS_ERR(regmap)) { |
| ret = PTR_ERR(regmap); |
| dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); |
| return ret; |
| } |
| |
| config.dev = &i2c->dev; |
| |
| for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) { |
| if (pdata) |
| config.init_data = pdata->init_data[i]; |
| else |
| config.init_data = NULL; |
| |
| rdev = devm_regulator_register(&i2c->dev, |
| &isl9305_regulators[i], |
| &config); |
| if (IS_ERR(rdev)) { |
| ret = PTR_ERR(rdev); |
| dev_err(&i2c->dev, "Failed to register %s: %d\n", |
| isl9305_regulators[i].name, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id isl9305_dt_ids[] = { |
| { .compatible = "isl,isl9305" }, /* for backward compat., don't use */ |
| { .compatible = "isil,isl9305" }, |
| { .compatible = "isl,isl9305h" }, /* for backward compat., don't use */ |
| { .compatible = "isil,isl9305h" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, isl9305_dt_ids); |
| #endif |
| |
| static const struct i2c_device_id isl9305_i2c_id[] = { |
| { "isl9305", }, |
| { "isl9305h", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id); |
| |
| static struct i2c_driver isl9305_regulator_driver = { |
| .driver = { |
| .name = "isl9305", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = of_match_ptr(isl9305_dt_ids), |
| }, |
| .probe = isl9305_i2c_probe, |
| .id_table = isl9305_i2c_id, |
| }; |
| |
| module_i2c_driver(isl9305_regulator_driver); |
| |
| MODULE_AUTHOR("Mark Brown"); |
| MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator"); |
| MODULE_LICENSE("GPL"); |