| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Altera SPI driver |
| * |
| * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw> |
| * |
| * Based on spi_s3c24xx.c, which is: |
| * Copyright (c) 2006 Ben Dooks |
| * Copyright (c) 2006 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/spi/altera.h> |
| #include <linux/spi/spi.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| |
| #define DRV_NAME "spi_altera" |
| |
| enum altera_spi_type { |
| ALTERA_SPI_TYPE_UNKNOWN, |
| ALTERA_SPI_TYPE_SUBDEV, |
| }; |
| |
| static const struct regmap_config spi_altera_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| .fast_io = true, |
| }; |
| |
| static int altera_spi_probe(struct platform_device *pdev) |
| { |
| const struct platform_device_id *platid = platform_get_device_id(pdev); |
| struct altera_spi_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| enum altera_spi_type type = ALTERA_SPI_TYPE_UNKNOWN; |
| struct altera_spi *hw; |
| struct spi_controller *host; |
| int err = -ENODEV; |
| u16 i; |
| |
| host = spi_alloc_host(&pdev->dev, sizeof(struct altera_spi)); |
| if (!host) |
| return err; |
| |
| /* setup the host state. */ |
| host->bus_num = -1; |
| |
| if (pdata) { |
| if (pdata->num_chipselect > ALTERA_SPI_MAX_CS) { |
| dev_err(&pdev->dev, |
| "Invalid number of chipselect: %u\n", |
| pdata->num_chipselect); |
| err = -EINVAL; |
| goto exit; |
| } |
| |
| host->num_chipselect = pdata->num_chipselect; |
| host->mode_bits = pdata->mode_bits; |
| host->bits_per_word_mask = pdata->bits_per_word_mask; |
| } else { |
| host->num_chipselect = 16; |
| host->mode_bits = SPI_CS_HIGH; |
| host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); |
| } |
| |
| host->dev.of_node = pdev->dev.of_node; |
| |
| hw = spi_controller_get_devdata(host); |
| hw->dev = &pdev->dev; |
| |
| if (platid) |
| type = platid->driver_data; |
| |
| /* find and map our resources */ |
| if (type == ALTERA_SPI_TYPE_SUBDEV) { |
| struct resource *regoff; |
| |
| hw->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!hw->regmap) { |
| dev_err(&pdev->dev, "get regmap failed\n"); |
| goto exit; |
| } |
| |
| regoff = platform_get_resource(pdev, IORESOURCE_REG, 0); |
| if (regoff) |
| hw->regoff = regoff->start; |
| } else { |
| void __iomem *res; |
| |
| res = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(res)) { |
| err = PTR_ERR(res); |
| goto exit; |
| } |
| |
| hw->regmap = devm_regmap_init_mmio(&pdev->dev, res, |
| &spi_altera_config); |
| if (IS_ERR(hw->regmap)) { |
| dev_err(&pdev->dev, "regmap mmio init failed\n"); |
| err = PTR_ERR(hw->regmap); |
| goto exit; |
| } |
| } |
| |
| altera_spi_init_host(host); |
| |
| /* irq is optional */ |
| hw->irq = platform_get_irq(pdev, 0); |
| if (hw->irq >= 0) { |
| err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0, |
| pdev->name, host); |
| if (err) |
| goto exit; |
| } |
| |
| err = devm_spi_register_controller(&pdev->dev, host); |
| if (err) |
| goto exit; |
| |
| if (pdata) { |
| for (i = 0; i < pdata->num_devices; i++) { |
| if (!spi_new_device(host, pdata->devices + i)) |
| dev_warn(&pdev->dev, |
| "unable to create SPI device: %s\n", |
| pdata->devices[i].modalias); |
| } |
| } |
| |
| dev_info(&pdev->dev, "regoff %u, irq %d\n", hw->regoff, hw->irq); |
| |
| return 0; |
| exit: |
| spi_controller_put(host); |
| return err; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id altera_spi_match[] = { |
| { .compatible = "ALTR,spi-1.0", }, |
| { .compatible = "altr,spi-1.0", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, altera_spi_match); |
| #endif /* CONFIG_OF */ |
| |
| static const struct platform_device_id altera_spi_ids[] = { |
| { DRV_NAME, ALTERA_SPI_TYPE_UNKNOWN }, |
| { "subdev_spi_altera", ALTERA_SPI_TYPE_SUBDEV }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, altera_spi_ids); |
| |
| static struct platform_driver altera_spi_driver = { |
| .probe = altera_spi_probe, |
| .driver = { |
| .name = DRV_NAME, |
| .pm = NULL, |
| .of_match_table = of_match_ptr(altera_spi_match), |
| }, |
| .id_table = altera_spi_ids, |
| }; |
| module_platform_driver(altera_spi_driver); |
| |
| MODULE_DESCRIPTION("Altera SPI driver"); |
| MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); |
| MODULE_LICENSE("GPL"); |