| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. |
| * All rights reserved. |
| * |
| */ |
| |
| #include "baseband.h" |
| #include "channel.h" |
| #include "device.h" |
| #include "rf.h" |
| |
| static struct ieee80211_rate vnt_rates_bg[] = { |
| { .bitrate = 10, .hw_value = RATE_1M }, |
| { .bitrate = 20, .hw_value = RATE_2M }, |
| { .bitrate = 55, .hw_value = RATE_5M }, |
| { .bitrate = 110, .hw_value = RATE_11M }, |
| { .bitrate = 60, .hw_value = RATE_6M }, |
| { .bitrate = 90, .hw_value = RATE_9M }, |
| { .bitrate = 120, .hw_value = RATE_12M }, |
| { .bitrate = 180, .hw_value = RATE_18M }, |
| { .bitrate = 240, .hw_value = RATE_24M }, |
| { .bitrate = 360, .hw_value = RATE_36M }, |
| { .bitrate = 480, .hw_value = RATE_48M }, |
| { .bitrate = 540, .hw_value = RATE_54M }, |
| }; |
| |
| static struct ieee80211_channel vnt_channels_2ghz[] = { |
| { .center_freq = 2412, .hw_value = 1 }, |
| { .center_freq = 2417, .hw_value = 2 }, |
| { .center_freq = 2422, .hw_value = 3 }, |
| { .center_freq = 2427, .hw_value = 4 }, |
| { .center_freq = 2432, .hw_value = 5 }, |
| { .center_freq = 2437, .hw_value = 6 }, |
| { .center_freq = 2442, .hw_value = 7 }, |
| { .center_freq = 2447, .hw_value = 8 }, |
| { .center_freq = 2452, .hw_value = 9 }, |
| { .center_freq = 2457, .hw_value = 10 }, |
| { .center_freq = 2462, .hw_value = 11 }, |
| { .center_freq = 2467, .hw_value = 12 }, |
| { .center_freq = 2472, .hw_value = 13 }, |
| { .center_freq = 2484, .hw_value = 14 } |
| }; |
| |
| static struct ieee80211_supported_band vnt_supported_2ghz_band = { |
| .channels = vnt_channels_2ghz, |
| .n_channels = ARRAY_SIZE(vnt_channels_2ghz), |
| .bitrates = vnt_rates_bg, |
| .n_bitrates = ARRAY_SIZE(vnt_rates_bg), |
| }; |
| |
| static void vnt_init_band(struct vnt_private *priv, |
| struct ieee80211_supported_band *supported_band, |
| enum nl80211_band band) |
| { |
| int i; |
| |
| for (i = 0; i < supported_band->n_channels; i++) { |
| supported_band->channels[i].max_power = 0x3f; |
| supported_band->channels[i].flags = |
| IEEE80211_CHAN_NO_HT40; |
| } |
| |
| priv->hw->wiphy->bands[band] = supported_band; |
| } |
| |
| void vnt_init_bands(struct vnt_private *priv) |
| { |
| vnt_init_band(priv, &vnt_supported_2ghz_band, NL80211_BAND_2GHZ); |
| } |
| |
| /** |
| * set_channel() - Set NIC media channel |
| * |
| * @priv: The adapter to be set |
| * @ch: Channel to be set |
| * |
| * Return Value: true if succeeded; false if failed. |
| * |
| */ |
| bool set_channel(struct vnt_private *priv, struct ieee80211_channel *ch) |
| { |
| bool ret = true; |
| |
| if (priv->current_ch == ch->hw_value) |
| return ret; |
| |
| /* Set VGA to max sensitivity */ |
| if (priv->update_bbvga && |
| priv->bbvga_current != priv->bbvga[0]) { |
| priv->bbvga_current = priv->bbvga[0]; |
| |
| bb_set_vga_gain_offset(priv, priv->bbvga_current); |
| } |
| |
| /* clear NAV */ |
| vt6655_mac_reg_bits_on(priv->port_offset, MAC_REG_MACCR, MACCR_CLRNAV); |
| |
| /* TX_PE will reserve 3 us for MAX2829 A mode only, |
| * it is for better TX throughput |
| */ |
| |
| priv->current_ch = ch->hw_value; |
| ret &= RFbSelectChannel(priv, priv->rf_type, |
| ch->hw_value); |
| |
| /* Init Synthesizer Table */ |
| if (priv->bEnablePSMode) |
| rf_write_wake_prog_syn(priv, priv->rf_type, ch->hw_value); |
| |
| bb_software_reset(priv); |
| |
| if (priv->local_id > REV_ID_VT3253_B1) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* set HW default power register */ |
| VT6655_MAC_SELECT_PAGE1(priv->port_offset); |
| RFbSetPower(priv, RATE_1M, priv->current_ch); |
| iowrite8(priv->cur_pwr, priv->port_offset + MAC_REG_PWRCCK); |
| RFbSetPower(priv, RATE_6M, priv->current_ch); |
| iowrite8(priv->cur_pwr, priv->port_offset + MAC_REG_PWROFDM); |
| VT6655_MAC_SELECT_PAGE0(priv->port_offset); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| if (priv->byBBType == BB_TYPE_11B) |
| RFbSetPower(priv, RATE_1M, priv->current_ch); |
| else |
| RFbSetPower(priv, RATE_6M, priv->current_ch); |
| |
| return ret; |
| } |