| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * drd.c - DesignWare USB2 DRD Controller Dual-role support |
| * |
| * Copyright (C) 2020 STMicroelectronics |
| * |
| * Author(s): Amelie Delaunay <amelie.delaunay@st.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/iopoll.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb/role.h> |
| #include "core.h" |
| |
| #define dwc2_ovr_gotgctl(gotgctl) \ |
| ((gotgctl) |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN | \ |
| GOTGCTL_DBNCE_FLTR_BYPASS) |
| |
| static void dwc2_ovr_init(struct dwc2_hsotg *hsotg) |
| { |
| unsigned long flags; |
| u32 gotgctl; |
| |
| spin_lock_irqsave(&hsotg->lock, flags); |
| |
| gotgctl = dwc2_readl(hsotg, GOTGCTL); |
| dwc2_ovr_gotgctl(gotgctl); |
| gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL); |
| if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) |
| gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL; |
| else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) |
| gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL; |
| dwc2_writel(hsotg, gotgctl, GOTGCTL); |
| |
| spin_unlock_irqrestore(&hsotg->lock, flags); |
| |
| dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) || |
| (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)); |
| } |
| |
| static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid) |
| { |
| u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); |
| |
| /* Check if A-Session is already in the right state */ |
| if ((valid && (gotgctl & GOTGCTL_ASESVLD)) || |
| (!valid && !(gotgctl & GOTGCTL_ASESVLD))) |
| return -EALREADY; |
| |
| /* Always enable overrides to handle the resume case */ |
| dwc2_ovr_gotgctl(gotgctl); |
| |
| gotgctl &= ~GOTGCTL_BVALOVAL; |
| if (valid) |
| gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL; |
| else |
| gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL); |
| dwc2_writel(hsotg, gotgctl, GOTGCTL); |
| |
| return 0; |
| } |
| |
| static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid) |
| { |
| u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); |
| |
| /* Check if B-Session is already in the right state */ |
| if ((valid && (gotgctl & GOTGCTL_BSESVLD)) || |
| (!valid && !(gotgctl & GOTGCTL_BSESVLD))) |
| return -EALREADY; |
| |
| /* Always enable overrides to handle the resume case */ |
| dwc2_ovr_gotgctl(gotgctl); |
| |
| gotgctl &= ~GOTGCTL_AVALOVAL; |
| if (valid) |
| gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL; |
| else |
| gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL); |
| dwc2_writel(hsotg, gotgctl, GOTGCTL); |
| |
| return 0; |
| } |
| |
| static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) |
| { |
| struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw); |
| unsigned long flags; |
| int already = 0; |
| |
| /* Skip session not in line with dr_mode */ |
| if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) || |
| (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) |
| return -EINVAL; |
| |
| #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ |
| IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) |
| /* Skip session if core is in test mode */ |
| if (role == USB_ROLE_NONE && hsotg->test_mode) { |
| dev_dbg(hsotg->dev, "Core is in test mode\n"); |
| return -EBUSY; |
| } |
| #endif |
| |
| /* |
| * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of |
| * the probe and enabled on udc_start. |
| * If role-switch set is called before the udc_start, we need to enable |
| * the clock to read/write GOTGCTL and GUSBCFG registers to override |
| * mode and sessions. It is the case if cable is plugged at boot. |
| */ |
| if (!hsotg->ll_hw_enabled && hsotg->clk) { |
| int ret = clk_prepare_enable(hsotg->clk); |
| |
| if (ret) |
| return ret; |
| } |
| |
| spin_lock_irqsave(&hsotg->lock, flags); |
| |
| if (role == USB_ROLE_NONE) { |
| /* default operation mode when usb role is USB_ROLE_NONE */ |
| if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) |
| role = USB_ROLE_HOST; |
| else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) |
| role = USB_ROLE_DEVICE; |
| } |
| |
| if ((IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || |
| IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)) && |
| dwc2_is_device_mode(hsotg) && |
| hsotg->lx_state == DWC2_L2 && |
| hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && |
| hsotg->bus_suspended && |
| !hsotg->params.no_clock_gating) |
| dwc2_gadget_exit_clock_gating(hsotg, 0); |
| |
| if (role == USB_ROLE_HOST) { |
| already = dwc2_ovr_avalid(hsotg, true); |
| } else if (role == USB_ROLE_DEVICE) { |
| already = dwc2_ovr_bvalid(hsotg, true); |
| if (dwc2_is_device_enabled(hsotg)) { |
| /* This clear DCTL.SFTDISCON bit */ |
| dwc2_hsotg_core_connect(hsotg); |
| } |
| } else { |
| if (dwc2_is_device_mode(hsotg)) { |
| if (!dwc2_ovr_bvalid(hsotg, false)) |
| /* This set DCTL.SFTDISCON bit */ |
| dwc2_hsotg_core_disconnect(hsotg); |
| } else { |
| dwc2_ovr_avalid(hsotg, false); |
| } |
| } |
| |
| spin_unlock_irqrestore(&hsotg->lock, flags); |
| |
| if (!already && hsotg->dr_mode == USB_DR_MODE_OTG) |
| /* This will raise a Connector ID Status Change Interrupt */ |
| dwc2_force_mode(hsotg, role == USB_ROLE_HOST); |
| |
| if (!hsotg->ll_hw_enabled && hsotg->clk) |
| clk_disable_unprepare(hsotg->clk); |
| |
| dev_dbg(hsotg->dev, "%s-session valid\n", |
| role == USB_ROLE_NONE ? "No" : |
| role == USB_ROLE_HOST ? "A" : "B"); |
| |
| return 0; |
| } |
| |
| int dwc2_drd_init(struct dwc2_hsotg *hsotg) |
| { |
| struct usb_role_switch_desc role_sw_desc = {0}; |
| struct usb_role_switch *role_sw; |
| int ret; |
| |
| if (!device_property_read_bool(hsotg->dev, "usb-role-switch")) |
| return 0; |
| |
| hsotg->role_sw_default_mode = usb_get_role_switch_default_mode(hsotg->dev); |
| role_sw_desc.driver_data = hsotg; |
| role_sw_desc.fwnode = dev_fwnode(hsotg->dev); |
| role_sw_desc.set = dwc2_drd_role_sw_set; |
| role_sw_desc.allow_userspace_control = true; |
| |
| role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc); |
| if (IS_ERR(role_sw)) { |
| ret = PTR_ERR(role_sw); |
| dev_err(hsotg->dev, |
| "failed to register role switch: %d\n", ret); |
| return ret; |
| } |
| |
| hsotg->role_sw = role_sw; |
| |
| /* Enable override and initialize values */ |
| dwc2_ovr_init(hsotg); |
| |
| return 0; |
| } |
| |
| void dwc2_drd_suspend(struct dwc2_hsotg *hsotg) |
| { |
| u32 gintsts, gintmsk; |
| |
| if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) { |
| gintmsk = dwc2_readl(hsotg, GINTMSK); |
| gintmsk &= ~GINTSTS_CONIDSTSCHNG; |
| dwc2_writel(hsotg, gintmsk, GINTMSK); |
| gintsts = dwc2_readl(hsotg, GINTSTS); |
| dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS); |
| } |
| } |
| |
| void dwc2_drd_resume(struct dwc2_hsotg *hsotg) |
| { |
| u32 gintsts, gintmsk; |
| enum usb_role role; |
| |
| if (hsotg->role_sw) { |
| /* get last known role (as the get ops isn't implemented by this driver) */ |
| role = usb_role_switch_get_role(hsotg->role_sw); |
| |
| if (role == USB_ROLE_NONE) { |
| if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) |
| role = USB_ROLE_HOST; |
| else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) |
| role = USB_ROLE_DEVICE; |
| } |
| |
| /* restore last role that may have been lost */ |
| if (role == USB_ROLE_HOST) |
| dwc2_ovr_avalid(hsotg, true); |
| else if (role == USB_ROLE_DEVICE) |
| dwc2_ovr_bvalid(hsotg, true); |
| |
| dwc2_force_mode(hsotg, role == USB_ROLE_HOST); |
| |
| dev_dbg(hsotg->dev, "resuming %s-session valid\n", |
| role == USB_ROLE_NONE ? "No" : |
| role == USB_ROLE_HOST ? "A" : "B"); |
| } |
| |
| if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) { |
| gintsts = dwc2_readl(hsotg, GINTSTS); |
| dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS); |
| gintmsk = dwc2_readl(hsotg, GINTMSK); |
| gintmsk |= GINTSTS_CONIDSTSCHNG; |
| dwc2_writel(hsotg, gintmsk, GINTMSK); |
| } |
| } |
| |
| void dwc2_drd_exit(struct dwc2_hsotg *hsotg) |
| { |
| if (hsotg->role_sw) |
| usb_role_switch_unregister(hsotg->role_sw); |
| } |