| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * |
| * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400 |
| * |
| * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz> |
| * |
| * Version: 1.65 2002/08/14 |
| * |
| * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org> |
| * |
| * Contributors: "menion?" <menion@mindless.com> |
| * Betatesting, fixes, ideas |
| * |
| * "Kurt Garloff" <garloff@suse.de> |
| * Betatesting, fixes, ideas, videomodes, videomodes timmings |
| * |
| * "Tom Rini" <trini@kernel.crashing.org> |
| * MTRR stuff, PPC cleanups, betatesting, fixes, ideas |
| * |
| * "Bibek Sahu" <scorpio@dodds.net> |
| * Access device through readb|w|l and write b|w|l |
| * Extensive debugging stuff |
| * |
| * "Daniel Haun" <haund@usa.net> |
| * Testing, hardware cursor fixes |
| * |
| * "Scott Wood" <sawst46+@pitt.edu> |
| * Fixes |
| * |
| * "Gerd Knorr" <kraxel@goldbach.isdn.cs.tu-berlin.de> |
| * Betatesting |
| * |
| * "Kelly French" <targon@hazmat.com> |
| * "Fernando Herrera" <fherrera@eurielec.etsit.upm.es> |
| * Betatesting, bug reporting |
| * |
| * "Pablo Bianucci" <pbian@pccp.com.ar> |
| * Fixes, ideas, betatesting |
| * |
| * "Inaky Perez Gonzalez" <inaky@peloncho.fis.ucm.es> |
| * Fixes, enhandcements, ideas, betatesting |
| * |
| * "Ryuichi Oikawa" <roikawa@rr.iiij4u.or.jp> |
| * PPC betatesting, PPC support, backward compatibility |
| * |
| * "Paul Womar" <Paul@pwomar.demon.co.uk> |
| * "Owen Waller" <O.Waller@ee.qub.ac.uk> |
| * PPC betatesting |
| * |
| * "Thomas Pornin" <pornin@bolet.ens.fr> |
| * Alpha betatesting |
| * |
| * "Pieter van Leuven" <pvl@iae.nl> |
| * "Ulf Jaenicke-Roessler" <ujr@physik.phy.tu-dresden.de> |
| * G100 testing |
| * |
| * "H. Peter Arvin" <hpa@transmeta.com> |
| * Ideas |
| * |
| * "Cort Dougan" <cort@cs.nmt.edu> |
| * CHRP fixes and PReP cleanup |
| * |
| * "Mark Vojkovich" <mvojkovi@ucsd.edu> |
| * G400 support |
| * |
| * (following author is not in any relation with this code, but his code |
| * is included in this driver) |
| * |
| * Based on framebuffer driver for VBE 2.0 compliant graphic boards |
| * (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de> |
| * |
| * (following author is not in any relation with this code, but his ideas |
| * were used when writing this driver) |
| * |
| * FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk> |
| * |
| */ |
| |
| #include "matroxfb_accel.h" |
| #include "matroxfb_DAC1064.h" |
| #include "matroxfb_Ti3026.h" |
| #include "matroxfb_misc.h" |
| |
| #define curr_ydstorg(x) ((x)->curr.ydstorg.pixels) |
| |
| #define mga_ydstlen(y,l) mga_outl(M_YDSTLEN | M_EXEC, ((y) << 16) | (l)) |
| |
| static inline void matrox_cfb4_pal(u_int32_t* pal) { |
| unsigned int i; |
| |
| for (i = 0; i < 16; i++) { |
| pal[i] = i * 0x11111111U; |
| } |
| } |
| |
| static inline void matrox_cfb8_pal(u_int32_t* pal) { |
| unsigned int i; |
| |
| for (i = 0; i < 16; i++) { |
| pal[i] = i * 0x01010101U; |
| } |
| } |
| |
| static void matroxfb_copyarea(struct fb_info* info, const struct fb_copyarea* area); |
| static void matroxfb_fillrect(struct fb_info* info, const struct fb_fillrect* rect); |
| static void matroxfb_imageblit(struct fb_info* info, const struct fb_image* image); |
| static void matroxfb_cfb4_fillrect(struct fb_info* info, const struct fb_fillrect* rect); |
| static void matroxfb_cfb4_copyarea(struct fb_info* info, const struct fb_copyarea* area); |
| |
| void matrox_cfbX_init(struct matrox_fb_info *minfo) |
| { |
| u_int32_t maccess; |
| u_int32_t mpitch; |
| u_int32_t mopmode; |
| int accel; |
| |
| DBG(__func__) |
| |
| mpitch = minfo->fbcon.var.xres_virtual; |
| |
| minfo->fbops.fb_copyarea = cfb_copyarea; |
| minfo->fbops.fb_fillrect = cfb_fillrect; |
| minfo->fbops.fb_imageblit = cfb_imageblit; |
| minfo->fbops.fb_cursor = NULL; |
| |
| accel = (minfo->fbcon.var.accel_flags & FB_ACCELF_TEXT) == FB_ACCELF_TEXT; |
| |
| switch (minfo->fbcon.var.bits_per_pixel) { |
| case 4: maccess = 0x00000000; /* accelerate as 8bpp video */ |
| mpitch = (mpitch >> 1) | 0x8000; /* disable linearization */ |
| mopmode = M_OPMODE_4BPP; |
| matrox_cfb4_pal(minfo->cmap); |
| if (accel && !(mpitch & 1)) { |
| minfo->fbops.fb_copyarea = matroxfb_cfb4_copyarea; |
| minfo->fbops.fb_fillrect = matroxfb_cfb4_fillrect; |
| } |
| break; |
| case 8: maccess = 0x00000000; |
| mopmode = M_OPMODE_8BPP; |
| matrox_cfb8_pal(minfo->cmap); |
| if (accel) { |
| minfo->fbops.fb_copyarea = matroxfb_copyarea; |
| minfo->fbops.fb_fillrect = matroxfb_fillrect; |
| minfo->fbops.fb_imageblit = matroxfb_imageblit; |
| } |
| break; |
| case 16: if (minfo->fbcon.var.green.length == 5) |
| maccess = 0xC0000001; |
| else |
| maccess = 0x40000001; |
| mopmode = M_OPMODE_16BPP; |
| if (accel) { |
| minfo->fbops.fb_copyarea = matroxfb_copyarea; |
| minfo->fbops.fb_fillrect = matroxfb_fillrect; |
| minfo->fbops.fb_imageblit = matroxfb_imageblit; |
| } |
| break; |
| case 24: maccess = 0x00000003; |
| mopmode = M_OPMODE_24BPP; |
| if (accel) { |
| minfo->fbops.fb_copyarea = matroxfb_copyarea; |
| minfo->fbops.fb_fillrect = matroxfb_fillrect; |
| minfo->fbops.fb_imageblit = matroxfb_imageblit; |
| } |
| break; |
| case 32: maccess = 0x00000002; |
| mopmode = M_OPMODE_32BPP; |
| if (accel) { |
| minfo->fbops.fb_copyarea = matroxfb_copyarea; |
| minfo->fbops.fb_fillrect = matroxfb_fillrect; |
| minfo->fbops.fb_imageblit = matroxfb_imageblit; |
| } |
| break; |
| default: maccess = 0x00000000; |
| mopmode = 0x00000000; |
| break; /* turn off acceleration!!! */ |
| } |
| mga_fifo(8); |
| mga_outl(M_PITCH, mpitch); |
| mga_outl(M_YDSTORG, curr_ydstorg(minfo)); |
| if (minfo->capable.plnwt) |
| mga_outl(M_PLNWT, -1); |
| if (minfo->capable.srcorg) { |
| mga_outl(M_SRCORG, 0); |
| mga_outl(M_DSTORG, 0); |
| } |
| mga_outl(M_OPMODE, mopmode); |
| mga_outl(M_CXBNDRY, 0xFFFF0000); |
| mga_outl(M_YTOP, 0); |
| mga_outl(M_YBOT, 0x01FFFFFF); |
| mga_outl(M_MACCESS, maccess); |
| minfo->accel.m_dwg_rect = M_DWG_TRAP | M_DWG_SOLID | M_DWG_ARZERO | M_DWG_SGNZERO | M_DWG_SHIFTZERO; |
| if (isMilleniumII(minfo)) minfo->accel.m_dwg_rect |= M_DWG_TRANSC; |
| minfo->accel.m_opmode = mopmode; |
| minfo->accel.m_access = maccess; |
| minfo->accel.m_pitch = mpitch; |
| } |
| |
| EXPORT_SYMBOL(matrox_cfbX_init); |
| |
| static void matrox_accel_restore_maccess(struct matrox_fb_info *minfo) |
| { |
| mga_outl(M_MACCESS, minfo->accel.m_access); |
| mga_outl(M_PITCH, minfo->accel.m_pitch); |
| } |
| |
| static void matrox_accel_bmove(struct matrox_fb_info *minfo, int vxres, int sy, |
| int sx, int dy, int dx, int height, int width) |
| { |
| int start, end; |
| CRITFLAGS |
| |
| DBG(__func__) |
| |
| CRITBEGIN |
| |
| if ((dy < sy) || ((dy == sy) && (dx <= sx))) { |
| mga_fifo(4); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_SGNZERO | |
| M_DWG_BFCOL | M_DWG_REPLACE); |
| mga_outl(M_AR5, vxres); |
| width--; |
| start = sy*vxres+sx+curr_ydstorg(minfo); |
| end = start+width; |
| } else { |
| mga_fifo(5); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_BFCOL | M_DWG_REPLACE); |
| mga_outl(M_SGN, 5); |
| mga_outl(M_AR5, -vxres); |
| width--; |
| end = (sy+height-1)*vxres+sx+curr_ydstorg(minfo); |
| start = end+width; |
| dy += height-1; |
| } |
| mga_fifo(6); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_AR0, end); |
| mga_outl(M_AR3, start); |
| mga_outl(M_FXBNDRY, ((dx+width)<<16) | dx); |
| mga_ydstlen(dy, height); |
| WaitTillIdle(); |
| |
| CRITEND |
| } |
| |
| static void matrox_accel_bmove_lin(struct matrox_fb_info *minfo, int vxres, |
| int sy, int sx, int dy, int dx, int height, |
| int width) |
| { |
| int start, end; |
| CRITFLAGS |
| |
| DBG(__func__) |
| |
| CRITBEGIN |
| |
| if ((dy < sy) || ((dy == sy) && (dx <= sx))) { |
| mga_fifo(4); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_SGNZERO | |
| M_DWG_BFCOL | M_DWG_REPLACE); |
| mga_outl(M_AR5, vxres); |
| width--; |
| start = sy*vxres+sx+curr_ydstorg(minfo); |
| end = start+width; |
| } else { |
| mga_fifo(5); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_BFCOL | M_DWG_REPLACE); |
| mga_outl(M_SGN, 5); |
| mga_outl(M_AR5, -vxres); |
| width--; |
| end = (sy+height-1)*vxres+sx+curr_ydstorg(minfo); |
| start = end+width; |
| dy += height-1; |
| } |
| mga_fifo(7); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_AR0, end); |
| mga_outl(M_AR3, start); |
| mga_outl(M_FXBNDRY, ((dx+width)<<16) | dx); |
| mga_outl(M_YDST, dy*vxres >> 5); |
| mga_outl(M_LEN | M_EXEC, height); |
| WaitTillIdle(); |
| |
| CRITEND |
| } |
| |
| static void matroxfb_cfb4_copyarea(struct fb_info* info, const struct fb_copyarea* area) { |
| struct matrox_fb_info *minfo = info2minfo(info); |
| |
| if ((area->sx | area->dx | area->width) & 1) |
| cfb_copyarea(info, area); |
| else |
| matrox_accel_bmove_lin(minfo, minfo->fbcon.var.xres_virtual >> 1, area->sy, area->sx >> 1, area->dy, area->dx >> 1, area->height, area->width >> 1); |
| } |
| |
| static void matroxfb_copyarea(struct fb_info* info, const struct fb_copyarea* area) { |
| struct matrox_fb_info *minfo = info2minfo(info); |
| |
| matrox_accel_bmove(minfo, minfo->fbcon.var.xres_virtual, area->sy, area->sx, area->dy, area->dx, area->height, area->width); |
| } |
| |
| static void matroxfb_accel_clear(struct matrox_fb_info *minfo, u_int32_t color, |
| int sy, int sx, int height, int width) |
| { |
| CRITFLAGS |
| |
| DBG(__func__) |
| |
| CRITBEGIN |
| |
| mga_fifo(7); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_DWGCTL, minfo->accel.m_dwg_rect | M_DWG_REPLACE); |
| mga_outl(M_FCOL, color); |
| mga_outl(M_FXBNDRY, ((sx + width) << 16) | sx); |
| mga_ydstlen(sy, height); |
| WaitTillIdle(); |
| |
| CRITEND |
| } |
| |
| static void matroxfb_fillrect(struct fb_info* info, const struct fb_fillrect* rect) { |
| struct matrox_fb_info *minfo = info2minfo(info); |
| |
| switch (rect->rop) { |
| case ROP_COPY: |
| matroxfb_accel_clear(minfo, ((u_int32_t *)info->pseudo_palette)[rect->color], rect->dy, rect->dx, rect->height, rect->width); |
| break; |
| } |
| } |
| |
| static void matroxfb_cfb4_clear(struct matrox_fb_info *minfo, u_int32_t bgx, |
| int sy, int sx, int height, int width) |
| { |
| int whattodo; |
| CRITFLAGS |
| |
| DBG(__func__) |
| |
| CRITBEGIN |
| |
| whattodo = 0; |
| if (sx & 1) { |
| sx ++; |
| if (!width) return; |
| width --; |
| whattodo = 1; |
| } |
| if (width & 1) { |
| whattodo |= 2; |
| } |
| width >>= 1; |
| sx >>= 1; |
| if (width) { |
| mga_fifo(7); |
| matrox_accel_restore_maccess(minfo); |
| mga_outl(M_DWGCTL, minfo->accel.m_dwg_rect | M_DWG_REPLACE2); |
| mga_outl(M_FCOL, bgx); |
| mga_outl(M_FXBNDRY, ((sx + width) << 16) | sx); |
| mga_outl(M_YDST, sy * minfo->fbcon.var.xres_virtual >> 6); |
| mga_outl(M_LEN | M_EXEC, height); |
| WaitTillIdle(); |
| } |
| if (whattodo) { |
| u_int32_t step = minfo->fbcon.var.xres_virtual >> 1; |
| vaddr_t vbase = minfo->video.vbase; |
| if (whattodo & 1) { |
| unsigned int uaddr = sy * step + sx - 1; |
| u_int32_t loop; |
| u_int8_t bgx2 = bgx & 0xF0; |
| for (loop = height; loop > 0; loop --) { |
| mga_writeb(vbase, uaddr, (mga_readb(vbase, uaddr) & 0x0F) | bgx2); |
| uaddr += step; |
| } |
| } |
| if (whattodo & 2) { |
| unsigned int uaddr = sy * step + sx + width; |
| u_int32_t loop; |
| u_int8_t bgx2 = bgx & 0x0F; |
| for (loop = height; loop > 0; loop --) { |
| mga_writeb(vbase, uaddr, (mga_readb(vbase, uaddr) & 0xF0) | bgx2); |
| uaddr += step; |
| } |
| } |
| } |
| |
| CRITEND |
| } |
| |
| static void matroxfb_cfb4_fillrect(struct fb_info* info, const struct fb_fillrect* rect) { |
| struct matrox_fb_info *minfo = info2minfo(info); |
| |
| switch (rect->rop) { |
| case ROP_COPY: |
| matroxfb_cfb4_clear(minfo, ((u_int32_t *)info->pseudo_palette)[rect->color], rect->dy, rect->dx, rect->height, rect->width); |
| break; |
| } |
| } |
| |
| static void matroxfb_1bpp_imageblit(struct matrox_fb_info *minfo, u_int32_t fgx, |
| u_int32_t bgx, const u_int8_t *chardata, |
| int width, int height, int yy, int xx) |
| { |
| u_int32_t step; |
| u_int32_t ydstlen; |
| u_int32_t xlen; |
| u_int32_t ar0; |
| u_int32_t charcell; |
| u_int32_t fxbndry; |
| vaddr_t mmio; |
| int easy; |
| CRITFLAGS |
| |
| DBG_HEAVY(__func__); |
| |
| step = (width + 7) >> 3; |
| charcell = height * step; |
| xlen = (charcell + 3) & ~3; |
| ydstlen = (yy << 16) | height; |
| if (width == step << 3) { |
| ar0 = height * width - 1; |
| easy = 1; |
| } else { |
| ar0 = width - 1; |
| easy = 0; |
| } |
| |
| CRITBEGIN |
| |
| mga_fifo(5); |
| matrox_accel_restore_maccess(minfo); |
| if (easy) |
| mga_outl(M_DWGCTL, M_DWG_ILOAD | M_DWG_SGNZERO | M_DWG_SHIFTZERO | M_DWG_BMONOWF | M_DWG_LINEAR | M_DWG_REPLACE); |
| else |
| mga_outl(M_DWGCTL, M_DWG_ILOAD | M_DWG_SGNZERO | M_DWG_SHIFTZERO | M_DWG_BMONOWF | M_DWG_REPLACE); |
| mga_outl(M_FCOL, fgx); |
| mga_outl(M_BCOL, bgx); |
| fxbndry = ((xx + width - 1) << 16) | xx; |
| mmio = minfo->mmio.vbase; |
| |
| mga_fifo(8); |
| matrox_accel_restore_maccess(minfo); |
| mga_writel(mmio, M_FXBNDRY, fxbndry); |
| mga_writel(mmio, M_AR0, ar0); |
| mga_writel(mmio, M_AR3, 0); |
| if (easy) { |
| mga_writel(mmio, M_YDSTLEN | M_EXEC, ydstlen); |
| mga_memcpy_toio(mmio, chardata, xlen); |
| } else { |
| mga_writel(mmio, M_AR5, 0); |
| mga_writel(mmio, M_YDSTLEN | M_EXEC, ydstlen); |
| if ((step & 3) == 0) { |
| /* Great. Source has 32bit aligned lines, so we can feed them |
| directly to the accelerator. */ |
| mga_memcpy_toio(mmio, chardata, charcell); |
| } else if (step == 1) { |
| /* Special case for 1..8bit widths */ |
| while (height--) { |
| #if defined(__BIG_ENDIAN) |
| fb_writel((*chardata) << 24, mmio.vaddr); |
| #else |
| fb_writel(*chardata, mmio.vaddr); |
| #endif |
| chardata++; |
| } |
| } else if (step == 2) { |
| /* Special case for 9..15bit widths */ |
| while (height--) { |
| #if defined(__BIG_ENDIAN) |
| fb_writel((*(u_int16_t*)chardata) << 16, mmio.vaddr); |
| #else |
| fb_writel(*(u_int16_t*)chardata, mmio.vaddr); |
| #endif |
| chardata += 2; |
| } |
| } else { |
| /* Tell... well, why bother... */ |
| while (height--) { |
| size_t i; |
| |
| for (i = 0; i < step; i += 4) { |
| /* Hope that there are at least three readable bytes beyond the end of bitmap */ |
| fb_writel(get_unaligned((u_int32_t*)(chardata + i)),mmio.vaddr); |
| } |
| chardata += step; |
| } |
| } |
| } |
| WaitTillIdle(); |
| CRITEND |
| } |
| |
| |
| static void matroxfb_imageblit(struct fb_info* info, const struct fb_image* image) { |
| struct matrox_fb_info *minfo = info2minfo(info); |
| |
| DBG_HEAVY(__func__); |
| |
| if (image->depth == 1) { |
| u_int32_t fgx, bgx; |
| |
| fgx = ((u_int32_t*)info->pseudo_palette)[image->fg_color]; |
| bgx = ((u_int32_t*)info->pseudo_palette)[image->bg_color]; |
| matroxfb_1bpp_imageblit(minfo, fgx, bgx, image->data, image->width, image->height, image->dy, image->dx); |
| } else { |
| /* Danger! image->depth is useless: logo painting code always |
| passes framebuffer color depth here, although logo data are |
| always 8bpp and info->pseudo_palette is changed to contain |
| logo palette to be used (but only for true/direct-color... sic...). |
| So do it completely in software... */ |
| cfb_imageblit(info, image); |
| } |
| } |
| |
| MODULE_DESCRIPTION("Accelerated fbops for Matrox Millennium/Mystique/G100/G200/G400/G450/G550"); |
| MODULE_LICENSE("GPL"); |