| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for AM6 SoC Family Main Domain peripherals |
| * |
| * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| #include <dt-bindings/phy/phy-am654-serdes.h> |
| |
| &cbass_main { |
| msmc_ram: sram@70000000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x70000000 0x0 0x200000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x70000000 0x200000>; |
| |
| atf-sram@0 { |
| reg = <0x0 0x20000>; |
| }; |
| |
| sysfw-sram@f0000 { |
| reg = <0xf0000 0x10000>; |
| }; |
| |
| l3cache-sram@100000 { |
| reg = <0x100000 0x100000>; |
| }; |
| }; |
| |
| gic500: interrupt-controller@1800000 { |
| compatible = "arm,gic-v3"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ |
| <0x00 0x01880000 0x00 0x90000>; /* GICR */ |
| /* |
| * vcpumntirq: |
| * virtual CPU interface maintenance interrupt |
| */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gic_its: gic-its@1820000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x00 0x01820000 0x00 0x10000>; |
| socionext,synquacer-pre-its = <0x1000000 0x400000>; |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| }; |
| |
| secure_proxy_main: mailbox@32c00000 { |
| compatible = "ti,am654-secure-proxy"; |
| #mbox-cells = <1>; |
| reg-names = "target_data", "rt", "scfg"; |
| reg = <0x00 0x32c00000 0x00 0x100000>, |
| <0x00 0x32400000 0x00 0x100000>, |
| <0x00 0x32800000 0x00 0x100000>; |
| interrupt-names = "rx_011"; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| serdes0: serdes@900000 { |
| compatible = "ti,phy-am654-serdes"; |
| reg = <0x0 0x900000 0x0 0x2000>; |
| reg-names = "serdes"; |
| #phy-cells = <2>; |
| power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; |
| clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; |
| assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; |
| assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; |
| ti,serdes-clk = <&serdes0_clk>; |
| #clock-cells = <1>; |
| mux-controls = <&serdes_mux 0>; |
| }; |
| |
| serdes1: serdes@910000 { |
| compatible = "ti,phy-am654-serdes"; |
| reg = <0x0 0x910000 0x0 0x2000>; |
| reg-names = "serdes"; |
| #phy-cells = <2>; |
| power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; |
| clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; |
| assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; |
| assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; |
| ti,serdes-clk = <&serdes1_clk>; |
| #clock-cells = <1>; |
| mux-controls = <&serdes_mux 1>; |
| }; |
| |
| main_uart0: serial@2800000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x00 0x02800000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_uart1: serial@2810000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x00 0x02810000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_uart2: serial@2820000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x00 0x02820000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_pmx0: pinmux@11c000 { |
| compatible = "pinctrl-single"; |
| reg = <0x0 0x11c000 0x0 0x2e4>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| }; |
| |
| main_pmx1: pinmux@11c2e8 { |
| compatible = "pinctrl-single"; |
| reg = <0x0 0x11c2e8 0x0 0x24>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| }; |
| |
| main_i2c0: i2c@2000000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2000000 0x0 0x100>; |
| interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 110 1>; |
| power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_i2c1: i2c@2010000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2010000 0x0 0x100>; |
| interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 111 1>; |
| power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_i2c2: i2c@2020000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2020000 0x0 0x100>; |
| interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 112 1>; |
| power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| main_i2c3: i2c@2030000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x0 0x2030000 0x0 0x100>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 113 1>; |
| power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| ecap0: pwm@3100000 { |
| compatible = "ti,am654-ecap", "ti,am3352-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x03100000 0x0 0x60>; |
| power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 39 0>; |
| clock-names = "fck"; |
| }; |
| |
| main_spi0: spi@2100000 { |
| compatible = "ti,am654-mcspi","ti,omap4-mcspi"; |
| reg = <0x0 0x2100000 0x0 0x400>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&k3_clks 137 1>; |
| power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| main_spi1: spi@2110000 { |
| compatible = "ti,am654-mcspi","ti,omap4-mcspi"; |
| reg = <0x0 0x2110000 0x0 0x400>; |
| interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&k3_clks 138 1>; |
| power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| assigned-clocks = <&k3_clks 137 1>; |
| assigned-clock-rates = <48000000>; |
| }; |
| |
| main_spi2: spi@2120000 { |
| compatible = "ti,am654-mcspi","ti,omap4-mcspi"; |
| reg = <0x0 0x2120000 0x0 0x400>; |
| interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&k3_clks 139 1>; |
| power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| main_spi3: spi@2130000 { |
| compatible = "ti,am654-mcspi","ti,omap4-mcspi"; |
| reg = <0x0 0x2130000 0x0 0x400>; |
| interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&k3_clks 140 1>; |
| power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| main_spi4: spi@2140000 { |
| compatible = "ti,am654-mcspi","ti,omap4-mcspi"; |
| reg = <0x0 0x2140000 0x0 0x400>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&k3_clks 141 1>; |
| power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| sdhci0: sdhci@4f80000 { |
| compatible = "ti,am654-sdhci-5.1"; |
| reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; |
| power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; |
| clock-names = "clk_ahb", "clk_xin"; |
| interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| mmc-ddr-1_8v; |
| mmc-hs200-1_8v; |
| ti,otap-del-sel = <0x2>; |
| ti,trm-icp = <0x8>; |
| dma-coherent; |
| }; |
| |
| scm_conf: scm_conf@100000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0 0x00100000 0 0x1c000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x00100000 0x1c000>; |
| |
| pcie0_mode: pcie-mode@4060 { |
| compatible = "syscon"; |
| reg = <0x00004060 0x4>; |
| }; |
| |
| pcie1_mode: pcie-mode@4070 { |
| compatible = "syscon"; |
| reg = <0x00004070 0x4>; |
| }; |
| |
| pcie_devid: pcie-devid@210 { |
| compatible = "syscon"; |
| reg = <0x00000210 0x4>; |
| }; |
| |
| serdes0_clk: serdes_clk@4080 { |
| compatible = "syscon"; |
| reg = <0x00004080 0x4>; |
| }; |
| |
| serdes1_clk: serdes_clk@4090 { |
| compatible = "syscon"; |
| reg = <0x00004090 0x4>; |
| }; |
| |
| serdes_mux: mux-controller { |
| compatible = "mmio-mux"; |
| #mux-control-cells = <1>; |
| mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ |
| <0x4090 0x3>; /* SERDES1 lane select */ |
| }; |
| }; |
| |
| dwc3_0: dwc3@4000000 { |
| compatible = "ti,am654-dwc3"; |
| reg = <0x0 0x4000000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x4000000 0x20000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; |
| assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; |
| assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ |
| <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ |
| |
| usb0: usb@10000 { |
| compatible = "snps,dwc3"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "peripheral", |
| "host", |
| "otg"; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| phys = <&usb0_phy>; |
| phy-names = "usb2-phy"; |
| snps,dis_u3_susphy_quirk; |
| }; |
| }; |
| |
| usb0_phy: phy@4100000 { |
| compatible = "ti,am654-usb2", "ti,omap-usb2"; |
| reg = <0x0 0x4100000 0x0 0x54>; |
| syscon-phy-power = <&scm_conf 0x4000>; |
| clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; |
| clock-names = "wkupclk", "refclk"; |
| #phy-cells = <0>; |
| }; |
| |
| dwc3_1: dwc3@4020000 { |
| compatible = "ti,am654-dwc3"; |
| reg = <0x0 0x4020000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x4020000 0x20000>; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; |
| assigned-clocks = <&k3_clks 152 2>; |
| assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ |
| |
| usb1: usb@10000 { |
| compatible = "snps,dwc3"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "peripheral", |
| "host", |
| "otg"; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| phys = <&usb1_phy>; |
| phy-names = "usb2-phy"; |
| }; |
| }; |
| |
| usb1_phy: phy@4110000 { |
| compatible = "ti,am654-usb2", "ti,omap-usb2"; |
| reg = <0x0 0x4110000 0x0 0x54>; |
| syscon-phy-power = <&scm_conf 0x4020>; |
| clocks = <&k3_clks 152 0>, <&k3_clks 152 1>; |
| clock-names = "wkupclk", "refclk"; |
| #phy-cells = <0>; |
| }; |
| |
| intr_main_gpio: interrupt-controller0 { |
| compatible = "ti,sci-intr"; |
| ti,intr-trigger-type = <1>; |
| interrupt-controller; |
| interrupt-parent = <&gic500>; |
| #interrupt-cells = <2>; |
| ti,sci = <&dmsc>; |
| ti,sci-dst-id = <56>; |
| ti,sci-rm-range-girq = <0x1>; |
| }; |
| |
| cbass_main_navss: interconnect0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| intr_main_navss: interrupt-controller1 { |
| compatible = "ti,sci-intr"; |
| ti,intr-trigger-type = <4>; |
| interrupt-controller; |
| interrupt-parent = <&gic500>; |
| #interrupt-cells = <2>; |
| ti,sci = <&dmsc>; |
| ti,sci-dst-id = <56>; |
| ti,sci-rm-range-girq = <0x0>, <0x2>; |
| }; |
| |
| inta_main_udmass: interrupt-controller@33d00000 { |
| compatible = "ti,sci-inta"; |
| reg = <0x0 0x33d00000 0x0 0x100000>; |
| interrupt-controller; |
| interrupt-parent = <&intr_main_navss>; |
| msi-controller; |
| ti,sci = <&dmsc>; |
| ti,sci-dev-id = <179>; |
| ti,sci-rm-range-vint = <0x0>; |
| ti,sci-rm-range-global-event = <0x1>; |
| }; |
| |
| hwspinlock: spinlock@30e00000 { |
| compatible = "ti,am654-hwspinlock"; |
| reg = <0x00 0x30e00000 0x00 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| }; |
| |
| main_gpio0: main_gpio0@600000 { |
| compatible = "ti,am654-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x600000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&intr_main_gpio>; |
| interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>, |
| <57 261>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <96>; |
| ti,davinci-gpio-unbanked = <0>; |
| clocks = <&k3_clks 57 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio1: main_gpio1@601000 { |
| compatible = "ti,am654-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x601000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&intr_main_gpio>; |
| interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>, |
| <58 261>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <90>; |
| ti,davinci-gpio-unbanked = <0>; |
| clocks = <&k3_clks 58 0>; |
| clock-names = "gpio"; |
| }; |
| |
| pcie0_rc: pcie@5500000 { |
| compatible = "ti,am654-pcie-rc"; |
| reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; |
| reg-names = "app", "dbics", "config", "atu"; |
| power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 |
| 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; |
| ti,syscon-pcie-id = <&pcie_devid>; |
| ti,syscon-pcie-mode = <&pcie0_mode>; |
| bus-range = <0x0 0xff>; |
| num-viewport = <16>; |
| max-link-speed = <3>; |
| dma-coherent; |
| interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; |
| msi-map = <0x0 &gic_its 0x0 0x10000>; |
| }; |
| |
| pcie0_ep: pcie-ep@5500000 { |
| compatible = "ti,am654-pcie-ep"; |
| reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; |
| reg-names = "app", "dbics", "addr_space", "atu"; |
| power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; |
| ti,syscon-pcie-mode = <&pcie0_mode>; |
| num-ib-windows = <16>; |
| num-ob-windows = <16>; |
| max-link-speed = <3>; |
| dma-coherent; |
| interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| pcie1_rc: pcie@5600000 { |
| compatible = "ti,am654-pcie-rc"; |
| reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; |
| reg-names = "app", "dbics", "config", "atu"; |
| power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 |
| 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; |
| ti,syscon-pcie-id = <&pcie_devid>; |
| ti,syscon-pcie-mode = <&pcie1_mode>; |
| bus-range = <0x0 0xff>; |
| num-viewport = <16>; |
| max-link-speed = <3>; |
| dma-coherent; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; |
| msi-map = <0x0 &gic_its 0x10000 0x10000>; |
| }; |
| |
| pcie1_ep: pcie-ep@5600000 { |
| compatible = "ti,am654-pcie-ep"; |
| reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; |
| reg-names = "app", "dbics", "addr_space", "atu"; |
| power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; |
| ti,syscon-pcie-mode = <&pcie1_mode>; |
| num-ib-windows = <16>; |
| num-ob-windows = <16>; |
| max-link-speed = <3>; |
| dma-coherent; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
