| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2011-2012, The Linux Foundation. All rights reserved. |
| * |
| * Description: CoreSight Program Flow Trace driver |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/smp.h> |
| #include <linux/sysfs.h> |
| #include <linux/stat.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/cpu.h> |
| #include <linux/of.h> |
| #include <linux/coresight.h> |
| #include <linux/coresight-pmu.h> |
| #include <linux/amba/bus.h> |
| #include <linux/seq_file.h> |
| #include <linux/uaccess.h> |
| #include <linux/clk.h> |
| #include <linux/perf_event.h> |
| #include <asm/sections.h> |
| |
| #include "coresight-etm.h" |
| #include "coresight-etm-perf.h" |
| |
| /* |
| * Not really modular but using module_param is the easiest way to |
| * remain consistent with existing use cases for now. |
| */ |
| static int boot_enable; |
| module_param_named(boot_enable, boot_enable, int, S_IRUGO); |
| |
| /* The number of ETM/PTM currently registered */ |
| static int etm_count; |
| static struct etm_drvdata *etmdrvdata[NR_CPUS]; |
| |
| static enum cpuhp_state hp_online; |
| |
| /* |
| * Memory mapped writes to clear os lock are not supported on some processors |
| * and OS lock must be unlocked before any memory mapped access on such |
| * processors, otherwise memory mapped reads/writes will be invalid. |
| */ |
| static void etm_os_unlock(struct etm_drvdata *drvdata) |
| { |
| /* Writing any value to ETMOSLAR unlocks the trace registers */ |
| etm_writel(drvdata, 0x0, ETMOSLAR); |
| drvdata->os_unlock = true; |
| isb(); |
| } |
| |
| static void etm_set_pwrdwn(struct etm_drvdata *drvdata) |
| { |
| u32 etmcr; |
| |
| /* Ensure pending cp14 accesses complete before setting pwrdwn */ |
| mb(); |
| isb(); |
| etmcr = etm_readl(drvdata, ETMCR); |
| etmcr |= ETMCR_PWD_DWN; |
| etm_writel(drvdata, etmcr, ETMCR); |
| } |
| |
| static void etm_clr_pwrdwn(struct etm_drvdata *drvdata) |
| { |
| u32 etmcr; |
| |
| etmcr = etm_readl(drvdata, ETMCR); |
| etmcr &= ~ETMCR_PWD_DWN; |
| etm_writel(drvdata, etmcr, ETMCR); |
| /* Ensure pwrup completes before subsequent cp14 accesses */ |
| mb(); |
| isb(); |
| } |
| |
| static void etm_set_pwrup(struct etm_drvdata *drvdata) |
| { |
| u32 etmpdcr; |
| |
| etmpdcr = readl_relaxed(drvdata->base + ETMPDCR); |
| etmpdcr |= ETMPDCR_PWD_UP; |
| writel_relaxed(etmpdcr, drvdata->base + ETMPDCR); |
| /* Ensure pwrup completes before subsequent cp14 accesses */ |
| mb(); |
| isb(); |
| } |
| |
| static void etm_clr_pwrup(struct etm_drvdata *drvdata) |
| { |
| u32 etmpdcr; |
| |
| /* Ensure pending cp14 accesses complete before clearing pwrup */ |
| mb(); |
| isb(); |
| etmpdcr = readl_relaxed(drvdata->base + ETMPDCR); |
| etmpdcr &= ~ETMPDCR_PWD_UP; |
| writel_relaxed(etmpdcr, drvdata->base + ETMPDCR); |
| } |
| |
| /** |
| * coresight_timeout_etm - loop until a bit has changed to a specific state. |
| * @drvdata: etm's private data structure. |
| * @offset: address of a register, starting from @addr. |
| * @position: the position of the bit of interest. |
| * @value: the value the bit should have. |
| * |
| * Basically the same as @coresight_timeout except for the register access |
| * method where we have to account for CP14 configurations. |
| |
| * Return: 0 as soon as the bit has taken the desired state or -EAGAIN if |
| * TIMEOUT_US has elapsed, which ever happens first. |
| */ |
| |
| static int coresight_timeout_etm(struct etm_drvdata *drvdata, u32 offset, |
| int position, int value) |
| { |
| int i; |
| u32 val; |
| |
| for (i = TIMEOUT_US; i > 0; i--) { |
| val = etm_readl(drvdata, offset); |
| /* Waiting on the bit to go from 0 to 1 */ |
| if (value) { |
| if (val & BIT(position)) |
| return 0; |
| /* Waiting on the bit to go from 1 to 0 */ |
| } else { |
| if (!(val & BIT(position))) |
| return 0; |
| } |
| |
| /* |
| * Delay is arbitrary - the specification doesn't say how long |
| * we are expected to wait. Extra check required to make sure |
| * we don't wait needlessly on the last iteration. |
| */ |
| if (i - 1) |
| udelay(1); |
| } |
| |
| return -EAGAIN; |
| } |
| |
| |
| static void etm_set_prog(struct etm_drvdata *drvdata) |
| { |
| u32 etmcr; |
| |
| etmcr = etm_readl(drvdata, ETMCR); |
| etmcr |= ETMCR_ETM_PRG; |
| etm_writel(drvdata, etmcr, ETMCR); |
| /* |
| * Recommended by spec for cp14 accesses to ensure etmcr write is |
| * complete before polling etmsr |
| */ |
| isb(); |
| if (coresight_timeout_etm(drvdata, ETMSR, ETMSR_PROG_BIT, 1)) { |
| dev_err(&drvdata->csdev->dev, |
| "%s: timeout observed when probing at offset %#x\n", |
| __func__, ETMSR); |
| } |
| } |
| |
| static void etm_clr_prog(struct etm_drvdata *drvdata) |
| { |
| u32 etmcr; |
| |
| etmcr = etm_readl(drvdata, ETMCR); |
| etmcr &= ~ETMCR_ETM_PRG; |
| etm_writel(drvdata, etmcr, ETMCR); |
| /* |
| * Recommended by spec for cp14 accesses to ensure etmcr write is |
| * complete before polling etmsr |
| */ |
| isb(); |
| if (coresight_timeout_etm(drvdata, ETMSR, ETMSR_PROG_BIT, 0)) { |
| dev_err(&drvdata->csdev->dev, |
| "%s: timeout observed when probing at offset %#x\n", |
| __func__, ETMSR); |
| } |
| } |
| |
| void etm_set_default(struct etm_config *config) |
| { |
| int i; |
| |
| if (WARN_ON_ONCE(!config)) |
| return; |
| |
| /* |
| * Taken verbatim from the TRM: |
| * |
| * To trace all memory: |
| * set bit [24] in register 0x009, the ETMTECR1, to 1 |
| * set all other bits in register 0x009, the ETMTECR1, to 0 |
| * set all bits in register 0x007, the ETMTECR2, to 0 |
| * set register 0x008, the ETMTEEVR, to 0x6F (TRUE). |
| */ |
| config->enable_ctrl1 = BIT(24); |
| config->enable_ctrl2 = 0x0; |
| config->enable_event = ETM_HARD_WIRE_RES_A; |
| |
| config->trigger_event = ETM_DEFAULT_EVENT_VAL; |
| config->enable_event = ETM_HARD_WIRE_RES_A; |
| |
| config->seq_12_event = ETM_DEFAULT_EVENT_VAL; |
| config->seq_21_event = ETM_DEFAULT_EVENT_VAL; |
| config->seq_23_event = ETM_DEFAULT_EVENT_VAL; |
| config->seq_31_event = ETM_DEFAULT_EVENT_VAL; |
| config->seq_32_event = ETM_DEFAULT_EVENT_VAL; |
| config->seq_13_event = ETM_DEFAULT_EVENT_VAL; |
| config->timestamp_event = ETM_DEFAULT_EVENT_VAL; |
| |
| for (i = 0; i < ETM_MAX_CNTR; i++) { |
| config->cntr_rld_val[i] = 0x0; |
| config->cntr_event[i] = ETM_DEFAULT_EVENT_VAL; |
| config->cntr_rld_event[i] = ETM_DEFAULT_EVENT_VAL; |
| config->cntr_val[i] = 0x0; |
| } |
| |
| config->seq_curr_state = 0x0; |
| config->ctxid_idx = 0x0; |
| for (i = 0; i < ETM_MAX_CTXID_CMP; i++) |
| config->ctxid_pid[i] = 0x0; |
| |
| config->ctxid_mask = 0x0; |
| /* Setting default to 1024 as per TRM recommendation */ |
| config->sync_freq = 0x400; |
| } |
| |
| void etm_config_trace_mode(struct etm_config *config) |
| { |
| u32 flags, mode; |
| |
| mode = config->mode; |
| |
| mode &= (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER); |
| |
| /* excluding kernel AND user space doesn't make sense */ |
| if (mode == (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER)) |
| return; |
| |
| /* nothing to do if neither flags are set */ |
| if (!(mode & ETM_MODE_EXCL_KERN) && !(mode & ETM_MODE_EXCL_USER)) |
| return; |
| |
| flags = (1 << 0 | /* instruction execute */ |
| 3 << 3 | /* ARM instruction */ |
| 0 << 5 | /* No data value comparison */ |
| 0 << 7 | /* No exact mach */ |
| 0 << 8); /* Ignore context ID */ |
| |
| /* No need to worry about single address comparators. */ |
| config->enable_ctrl2 = 0x0; |
| |
| /* Bit 0 is address range comparator 1 */ |
| config->enable_ctrl1 = ETMTECR1_ADDR_COMP_1; |
| |
| /* |
| * On ETMv3.5: |
| * ETMACTRn[13,11] == Non-secure state comparison control |
| * ETMACTRn[12,10] == Secure state comparison control |
| * |
| * b00 == Match in all modes in this state |
| * b01 == Do not match in any more in this state |
| * b10 == Match in all modes excepts user mode in this state |
| * b11 == Match only in user mode in this state |
| */ |
| |
| /* Tracing in secure mode is not supported at this time */ |
| flags |= (0 << 12 | 1 << 10); |
| |
| if (mode & ETM_MODE_EXCL_USER) { |
| /* exclude user, match all modes except user mode */ |
| flags |= (1 << 13 | 0 << 11); |
| } else { |
| /* exclude kernel, match only in user mode */ |
| flags |= (1 << 13 | 1 << 11); |
| } |
| |
| /* |
| * The ETMEEVR register is already set to "hard wire A". As such |
| * all there is to do is setup an address comparator that spans |
| * the entire address range and configure the state and mode bits. |
| */ |
| config->addr_val[0] = (u32) 0x0; |
| config->addr_val[1] = (u32) ~0x0; |
| config->addr_acctype[0] = flags; |
| config->addr_acctype[1] = flags; |
| config->addr_type[0] = ETM_ADDR_TYPE_RANGE; |
| config->addr_type[1] = ETM_ADDR_TYPE_RANGE; |
| } |
| |
| #define ETM3X_SUPPORTED_OPTIONS (ETMCR_CYC_ACC | \ |
| ETMCR_TIMESTAMP_EN | \ |
| ETMCR_RETURN_STACK) |
| |
| static int etm_parse_event_config(struct etm_drvdata *drvdata, |
| struct perf_event *event) |
| { |
| struct etm_config *config = &drvdata->config; |
| struct perf_event_attr *attr = &event->attr; |
| |
| if (!attr) |
| return -EINVAL; |
| |
| /* Clear configuration from previous run */ |
| memset(config, 0, sizeof(struct etm_config)); |
| |
| if (attr->exclude_kernel) |
| config->mode = ETM_MODE_EXCL_KERN; |
| |
| if (attr->exclude_user) |
| config->mode = ETM_MODE_EXCL_USER; |
| |
| /* Always start from the default config */ |
| etm_set_default(config); |
| |
| /* |
| * By default the tracers are configured to trace the whole address |
| * range. Narrow the field only if requested by user space. |
| */ |
| if (config->mode) |
| etm_config_trace_mode(config); |
| |
| /* |
| * At this time only cycle accurate, return stack and timestamp |
| * options are available. |
| */ |
| if (attr->config & ~ETM3X_SUPPORTED_OPTIONS) |
| return -EINVAL; |
| |
| config->ctrl = attr->config; |
| |
| /* |
| * Possible to have cores with PTM (supports ret stack) and ETM |
| * (never has ret stack) on the same SoC. So if we have a request |
| * for return stack that can't be honoured on this core then |
| * clear the bit - trace will still continue normally |
| */ |
| if ((config->ctrl & ETMCR_RETURN_STACK) && |
| !(drvdata->etmccer & ETMCCER_RETSTACK)) |
| config->ctrl &= ~ETMCR_RETURN_STACK; |
| |
| return 0; |
| } |
| |
| static int etm_enable_hw(struct etm_drvdata *drvdata) |
| { |
| int i, rc; |
| u32 etmcr; |
| struct etm_config *config = &drvdata->config; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| rc = coresight_claim_device_unlocked(drvdata->base); |
| if (rc) |
| goto done; |
| |
| /* Turn engine on */ |
| etm_clr_pwrdwn(drvdata); |
| /* Apply power to trace registers */ |
| etm_set_pwrup(drvdata); |
| /* Make sure all registers are accessible */ |
| etm_os_unlock(drvdata); |
| |
| etm_set_prog(drvdata); |
| |
| etmcr = etm_readl(drvdata, ETMCR); |
| /* Clear setting from a previous run if need be */ |
| etmcr &= ~ETM3X_SUPPORTED_OPTIONS; |
| etmcr |= drvdata->port_size; |
| etmcr |= ETMCR_ETM_EN; |
| etm_writel(drvdata, config->ctrl | etmcr, ETMCR); |
| etm_writel(drvdata, config->trigger_event, ETMTRIGGER); |
| etm_writel(drvdata, config->startstop_ctrl, ETMTSSCR); |
| etm_writel(drvdata, config->enable_event, ETMTEEVR); |
| etm_writel(drvdata, config->enable_ctrl1, ETMTECR1); |
| etm_writel(drvdata, config->fifofull_level, ETMFFLR); |
| for (i = 0; i < drvdata->nr_addr_cmp; i++) { |
| etm_writel(drvdata, config->addr_val[i], ETMACVRn(i)); |
| etm_writel(drvdata, config->addr_acctype[i], ETMACTRn(i)); |
| } |
| for (i = 0; i < drvdata->nr_cntr; i++) { |
| etm_writel(drvdata, config->cntr_rld_val[i], ETMCNTRLDVRn(i)); |
| etm_writel(drvdata, config->cntr_event[i], ETMCNTENRn(i)); |
| etm_writel(drvdata, config->cntr_rld_event[i], |
| ETMCNTRLDEVRn(i)); |
| etm_writel(drvdata, config->cntr_val[i], ETMCNTVRn(i)); |
| } |
| etm_writel(drvdata, config->seq_12_event, ETMSQ12EVR); |
| etm_writel(drvdata, config->seq_21_event, ETMSQ21EVR); |
| etm_writel(drvdata, config->seq_23_event, ETMSQ23EVR); |
| etm_writel(drvdata, config->seq_31_event, ETMSQ31EVR); |
| etm_writel(drvdata, config->seq_32_event, ETMSQ32EVR); |
| etm_writel(drvdata, config->seq_13_event, ETMSQ13EVR); |
| etm_writel(drvdata, config->seq_curr_state, ETMSQR); |
| for (i = 0; i < drvdata->nr_ext_out; i++) |
| etm_writel(drvdata, ETM_DEFAULT_EVENT_VAL, ETMEXTOUTEVRn(i)); |
| for (i = 0; i < drvdata->nr_ctxid_cmp; i++) |
| etm_writel(drvdata, config->ctxid_pid[i], ETMCIDCVRn(i)); |
| etm_writel(drvdata, config->ctxid_mask, ETMCIDCMR); |
| etm_writel(drvdata, config->sync_freq, ETMSYNCFR); |
| /* No external input selected */ |
| etm_writel(drvdata, 0x0, ETMEXTINSELR); |
| etm_writel(drvdata, config->timestamp_event, ETMTSEVR); |
| /* No auxiliary control selected */ |
| etm_writel(drvdata, 0x0, ETMAUXCR); |
| etm_writel(drvdata, drvdata->traceid, ETMTRACEIDR); |
| /* No VMID comparator value selected */ |
| etm_writel(drvdata, 0x0, ETMVMIDCVR); |
| |
| etm_clr_prog(drvdata); |
| |
| done: |
| CS_LOCK(drvdata->base); |
| |
| dev_dbg(&drvdata->csdev->dev, "cpu: %d enable smp call done: %d\n", |
| drvdata->cpu, rc); |
| return rc; |
| } |
| |
| struct etm_enable_arg { |
| struct etm_drvdata *drvdata; |
| int rc; |
| }; |
| |
| static void etm_enable_hw_smp_call(void *info) |
| { |
| struct etm_enable_arg *arg = info; |
| |
| if (WARN_ON(!arg)) |
| return; |
| arg->rc = etm_enable_hw(arg->drvdata); |
| } |
| |
| static int etm_cpu_id(struct coresight_device *csdev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| return drvdata->cpu; |
| } |
| |
| int etm_get_trace_id(struct etm_drvdata *drvdata) |
| { |
| unsigned long flags; |
| int trace_id = -1; |
| struct device *etm_dev; |
| |
| if (!drvdata) |
| goto out; |
| |
| etm_dev = drvdata->csdev->dev.parent; |
| if (!local_read(&drvdata->mode)) |
| return drvdata->traceid; |
| |
| pm_runtime_get_sync(etm_dev); |
| |
| spin_lock_irqsave(&drvdata->spinlock, flags); |
| |
| CS_UNLOCK(drvdata->base); |
| trace_id = (etm_readl(drvdata, ETMTRACEIDR) & ETM_TRACEID_MASK); |
| CS_LOCK(drvdata->base); |
| |
| spin_unlock_irqrestore(&drvdata->spinlock, flags); |
| pm_runtime_put(etm_dev); |
| |
| out: |
| return trace_id; |
| |
| } |
| |
| static int etm_trace_id(struct coresight_device *csdev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| return etm_get_trace_id(drvdata); |
| } |
| |
| static int etm_enable_perf(struct coresight_device *csdev, |
| struct perf_event *event) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) |
| return -EINVAL; |
| |
| /* Configure the tracer based on the session's specifics */ |
| etm_parse_event_config(drvdata, event); |
| /* And enable it */ |
| return etm_enable_hw(drvdata); |
| } |
| |
| static int etm_enable_sysfs(struct coresight_device *csdev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| struct etm_enable_arg arg = { 0 }; |
| int ret; |
| |
| spin_lock(&drvdata->spinlock); |
| |
| /* |
| * Configure the ETM only if the CPU is online. If it isn't online |
| * hw configuration will take place on the local CPU during bring up. |
| */ |
| if (cpu_online(drvdata->cpu)) { |
| arg.drvdata = drvdata; |
| ret = smp_call_function_single(drvdata->cpu, |
| etm_enable_hw_smp_call, &arg, 1); |
| if (!ret) |
| ret = arg.rc; |
| if (!ret) |
| drvdata->sticky_enable = true; |
| } else { |
| ret = -ENODEV; |
| } |
| |
| spin_unlock(&drvdata->spinlock); |
| |
| if (!ret) |
| dev_dbg(&csdev->dev, "ETM tracing enabled\n"); |
| return ret; |
| } |
| |
| static int etm_enable(struct coresight_device *csdev, |
| struct perf_event *event, u32 mode) |
| { |
| int ret; |
| u32 val; |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| val = local_cmpxchg(&drvdata->mode, CS_MODE_DISABLED, mode); |
| |
| /* Someone is already using the tracer */ |
| if (val) |
| return -EBUSY; |
| |
| switch (mode) { |
| case CS_MODE_SYSFS: |
| ret = etm_enable_sysfs(csdev); |
| break; |
| case CS_MODE_PERF: |
| ret = etm_enable_perf(csdev, event); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| /* The tracer didn't start */ |
| if (ret) |
| local_set(&drvdata->mode, CS_MODE_DISABLED); |
| |
| return ret; |
| } |
| |
| static void etm_disable_hw(void *info) |
| { |
| int i; |
| struct etm_drvdata *drvdata = info; |
| struct etm_config *config = &drvdata->config; |
| |
| CS_UNLOCK(drvdata->base); |
| etm_set_prog(drvdata); |
| |
| /* Read back sequencer and counters for post trace analysis */ |
| config->seq_curr_state = (etm_readl(drvdata, ETMSQR) & ETM_SQR_MASK); |
| |
| for (i = 0; i < drvdata->nr_cntr; i++) |
| config->cntr_val[i] = etm_readl(drvdata, ETMCNTVRn(i)); |
| |
| etm_set_pwrdwn(drvdata); |
| coresight_disclaim_device_unlocked(drvdata->base); |
| |
| CS_LOCK(drvdata->base); |
| |
| dev_dbg(&drvdata->csdev->dev, |
| "cpu: %d disable smp call done\n", drvdata->cpu); |
| } |
| |
| static void etm_disable_perf(struct coresight_device *csdev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) |
| return; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* Setting the prog bit disables tracing immediately */ |
| etm_set_prog(drvdata); |
| |
| /* |
| * There is no way to know when the tracer will be used again so |
| * power down the tracer. |
| */ |
| etm_set_pwrdwn(drvdata); |
| coresight_disclaim_device_unlocked(drvdata->base); |
| |
| CS_LOCK(drvdata->base); |
| } |
| |
| static void etm_disable_sysfs(struct coresight_device *csdev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| /* |
| * Taking hotplug lock here protects from clocks getting disabled |
| * with tracing being left on (crash scenario) if user disable occurs |
| * after cpu online mask indicates the cpu is offline but before the |
| * DYING hotplug callback is serviced by the ETM driver. |
| */ |
| cpus_read_lock(); |
| spin_lock(&drvdata->spinlock); |
| |
| /* |
| * Executing etm_disable_hw on the cpu whose ETM is being disabled |
| * ensures that register writes occur when cpu is powered. |
| */ |
| smp_call_function_single(drvdata->cpu, etm_disable_hw, drvdata, 1); |
| |
| spin_unlock(&drvdata->spinlock); |
| cpus_read_unlock(); |
| |
| dev_dbg(&csdev->dev, "ETM tracing disabled\n"); |
| } |
| |
| static void etm_disable(struct coresight_device *csdev, |
| struct perf_event *event) |
| { |
| u32 mode; |
| struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| /* |
| * For as long as the tracer isn't disabled another entity can't |
| * change its status. As such we can read the status here without |
| * fearing it will change under us. |
| */ |
| mode = local_read(&drvdata->mode); |
| |
| switch (mode) { |
| case CS_MODE_DISABLED: |
| break; |
| case CS_MODE_SYSFS: |
| etm_disable_sysfs(csdev); |
| break; |
| case CS_MODE_PERF: |
| etm_disable_perf(csdev); |
| break; |
| default: |
| WARN_ON_ONCE(mode); |
| return; |
| } |
| |
| if (mode) |
| local_set(&drvdata->mode, CS_MODE_DISABLED); |
| } |
| |
| static const struct coresight_ops_source etm_source_ops = { |
| .cpu_id = etm_cpu_id, |
| .trace_id = etm_trace_id, |
| .enable = etm_enable, |
| .disable = etm_disable, |
| }; |
| |
| static const struct coresight_ops etm_cs_ops = { |
| .source_ops = &etm_source_ops, |
| }; |
| |
| static int etm_online_cpu(unsigned int cpu) |
| { |
| if (!etmdrvdata[cpu]) |
| return 0; |
| |
| if (etmdrvdata[cpu]->boot_enable && !etmdrvdata[cpu]->sticky_enable) |
| coresight_enable(etmdrvdata[cpu]->csdev); |
| return 0; |
| } |
| |
| static int etm_starting_cpu(unsigned int cpu) |
| { |
| if (!etmdrvdata[cpu]) |
| return 0; |
| |
| spin_lock(&etmdrvdata[cpu]->spinlock); |
| if (!etmdrvdata[cpu]->os_unlock) { |
| etm_os_unlock(etmdrvdata[cpu]); |
| etmdrvdata[cpu]->os_unlock = true; |
| } |
| |
| if (local_read(&etmdrvdata[cpu]->mode)) |
| etm_enable_hw(etmdrvdata[cpu]); |
| spin_unlock(&etmdrvdata[cpu]->spinlock); |
| return 0; |
| } |
| |
| static int etm_dying_cpu(unsigned int cpu) |
| { |
| if (!etmdrvdata[cpu]) |
| return 0; |
| |
| spin_lock(&etmdrvdata[cpu]->spinlock); |
| if (local_read(&etmdrvdata[cpu]->mode)) |
| etm_disable_hw(etmdrvdata[cpu]); |
| spin_unlock(&etmdrvdata[cpu]->spinlock); |
| return 0; |
| } |
| |
| static bool etm_arch_supported(u8 arch) |
| { |
| switch (arch) { |
| case ETM_ARCH_V3_3: |
| break; |
| case ETM_ARCH_V3_5: |
| break; |
| case PFT_ARCH_V1_0: |
| break; |
| case PFT_ARCH_V1_1: |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| |
| static void etm_init_arch_data(void *info) |
| { |
| u32 etmidr; |
| u32 etmccr; |
| struct etm_drvdata *drvdata = info; |
| |
| /* Make sure all registers are accessible */ |
| etm_os_unlock(drvdata); |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* First dummy read */ |
| (void)etm_readl(drvdata, ETMPDSR); |
| /* Provide power to ETM: ETMPDCR[3] == 1 */ |
| etm_set_pwrup(drvdata); |
| /* |
| * Clear power down bit since when this bit is set writes to |
| * certain registers might be ignored. |
| */ |
| etm_clr_pwrdwn(drvdata); |
| /* |
| * Set prog bit. It will be set from reset but this is included to |
| * ensure it is set |
| */ |
| etm_set_prog(drvdata); |
| |
| /* Find all capabilities */ |
| etmidr = etm_readl(drvdata, ETMIDR); |
| drvdata->arch = BMVAL(etmidr, 4, 11); |
| drvdata->port_size = etm_readl(drvdata, ETMCR) & PORT_SIZE_MASK; |
| |
| drvdata->etmccer = etm_readl(drvdata, ETMCCER); |
| etmccr = etm_readl(drvdata, ETMCCR); |
| drvdata->etmccr = etmccr; |
| drvdata->nr_addr_cmp = BMVAL(etmccr, 0, 3) * 2; |
| drvdata->nr_cntr = BMVAL(etmccr, 13, 15); |
| drvdata->nr_ext_inp = BMVAL(etmccr, 17, 19); |
| drvdata->nr_ext_out = BMVAL(etmccr, 20, 22); |
| drvdata->nr_ctxid_cmp = BMVAL(etmccr, 24, 25); |
| |
| etm_set_pwrdwn(drvdata); |
| etm_clr_pwrup(drvdata); |
| CS_LOCK(drvdata->base); |
| } |
| |
| static void etm_init_trace_id(struct etm_drvdata *drvdata) |
| { |
| drvdata->traceid = coresight_get_trace_id(drvdata->cpu); |
| } |
| |
| static int etm_probe(struct amba_device *adev, const struct amba_id *id) |
| { |
| int ret; |
| void __iomem *base; |
| struct device *dev = &adev->dev; |
| struct coresight_platform_data *pdata = NULL; |
| struct etm_drvdata *drvdata; |
| struct resource *res = &adev->res; |
| struct coresight_desc desc = { 0 }; |
| |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| drvdata->use_cp14 = fwnode_property_read_bool(dev->fwnode, "arm,cp14"); |
| dev_set_drvdata(dev, drvdata); |
| |
| /* Validity for the resource is already checked by the AMBA core */ |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| drvdata->base = base; |
| |
| spin_lock_init(&drvdata->spinlock); |
| |
| drvdata->atclk = devm_clk_get(&adev->dev, "atclk"); /* optional */ |
| if (!IS_ERR(drvdata->atclk)) { |
| ret = clk_prepare_enable(drvdata->atclk); |
| if (ret) |
| return ret; |
| } |
| |
| drvdata->cpu = coresight_get_cpu(dev); |
| if (drvdata->cpu < 0) |
| return drvdata->cpu; |
| |
| desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu); |
| if (!desc.name) |
| return -ENOMEM; |
| |
| cpus_read_lock(); |
| etmdrvdata[drvdata->cpu] = drvdata; |
| |
| if (smp_call_function_single(drvdata->cpu, |
| etm_init_arch_data, drvdata, 1)) |
| dev_err(dev, "ETM arch init failed\n"); |
| |
| if (!etm_count++) { |
| cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ARM_CORESIGHT_STARTING, |
| "arm/coresight:starting", |
| etm_starting_cpu, etm_dying_cpu); |
| ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN, |
| "arm/coresight:online", |
| etm_online_cpu, NULL); |
| if (ret < 0) |
| goto err_arch_supported; |
| hp_online = ret; |
| } |
| cpus_read_unlock(); |
| |
| if (etm_arch_supported(drvdata->arch) == false) { |
| ret = -EINVAL; |
| goto err_arch_supported; |
| } |
| |
| etm_init_trace_id(drvdata); |
| etm_set_default(&drvdata->config); |
| |
| pdata = coresight_get_platform_data(dev); |
| if (IS_ERR(pdata)) { |
| ret = PTR_ERR(pdata); |
| goto err_arch_supported; |
| } |
| adev->dev.platform_data = pdata; |
| |
| desc.type = CORESIGHT_DEV_TYPE_SOURCE; |
| desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_PROC; |
| desc.ops = &etm_cs_ops; |
| desc.pdata = pdata; |
| desc.dev = dev; |
| desc.groups = coresight_etm_groups; |
| drvdata->csdev = coresight_register(&desc); |
| if (IS_ERR(drvdata->csdev)) { |
| ret = PTR_ERR(drvdata->csdev); |
| goto err_arch_supported; |
| } |
| |
| ret = etm_perf_symlink(drvdata->csdev, true); |
| if (ret) { |
| coresight_unregister(drvdata->csdev); |
| goto err_arch_supported; |
| } |
| |
| pm_runtime_put(&adev->dev); |
| dev_info(&drvdata->csdev->dev, |
| "%s initialized\n", (char *)coresight_get_uci_data(id)); |
| if (boot_enable) { |
| coresight_enable(drvdata->csdev); |
| drvdata->boot_enable = true; |
| } |
| |
| return 0; |
| |
| err_arch_supported: |
| if (--etm_count == 0) { |
| cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING); |
| if (hp_online) |
| cpuhp_remove_state_nocalls(hp_online); |
| } |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int etm_runtime_suspend(struct device *dev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (drvdata && !IS_ERR(drvdata->atclk)) |
| clk_disable_unprepare(drvdata->atclk); |
| |
| return 0; |
| } |
| |
| static int etm_runtime_resume(struct device *dev) |
| { |
| struct etm_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (drvdata && !IS_ERR(drvdata->atclk)) |
| clk_prepare_enable(drvdata->atclk); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops etm_dev_pm_ops = { |
| SET_RUNTIME_PM_OPS(etm_runtime_suspend, etm_runtime_resume, NULL) |
| }; |
| |
| static const struct amba_id etm_ids[] = { |
| /* ETM 3.3 */ |
| CS_AMBA_ID_DATA(0x000bb921, "ETM 3.3"), |
| /* ETM 3.5 - Cortex-A5 */ |
| CS_AMBA_ID_DATA(0x000bb955, "ETM 3.5"), |
| /* ETM 3.5 */ |
| CS_AMBA_ID_DATA(0x000bb956, "ETM 3.5"), |
| /* PTM 1.0 */ |
| CS_AMBA_ID_DATA(0x000bb950, "PTM 1.0"), |
| /* PTM 1.1 */ |
| CS_AMBA_ID_DATA(0x000bb95f, "PTM 1.1"), |
| /* PTM 1.1 Qualcomm */ |
| CS_AMBA_ID_DATA(0x000b006f, "PTM 1.1"), |
| { 0, 0}, |
| }; |
| |
| static struct amba_driver etm_driver = { |
| .drv = { |
| .name = "coresight-etm3x", |
| .owner = THIS_MODULE, |
| .pm = &etm_dev_pm_ops, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = etm_probe, |
| .id_table = etm_ids, |
| }; |
| builtin_amba_driver(etm_driver); |