| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # humidity sensor drivers |
| # |
| menu "Humidity sensors" |
| |
| config AM2315 |
| tristate "Aosong AM2315 relative humidity and temperature sensor" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| If you say yes here you get support for the Aosong AM2315 |
| relative humidity and ambient temperature sensor. |
| |
| This driver can also be built as a module. If so, the module will |
| be called am2315. |
| |
| config DHT11 |
| tristate "DHT11 (and compatible sensors) driver" |
| depends on GPIOLIB || COMPILE_TEST |
| help |
| This driver supports reading data via a single interrupt |
| generating GPIO line. Currently tested are DHT11 and DHT22. |
| Other sensors should work as well as long as they speak the |
| same protocol. |
| |
| config HDC100X |
| tristate "TI HDC100x relative humidity and temperature sensor" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for the Texas Instruments |
| HDC1000, HDC1008, HDC1010, HDC1050, and HDC1080 relative |
| humidity and temperature sensors. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hdc100x. |
| |
| config HID_SENSOR_HUMIDITY |
| tristate "HID Environmental humidity sensor" |
| depends on HID_SENSOR_HUB |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select HID_SENSOR_IIO_COMMON |
| select HID_SENSOR_IIO_TRIGGER |
| help |
| Say yes here to build support for the HID SENSOR |
| humidity driver |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hid-sensor-humidity. |
| |
| config HTS221 |
| tristate "STMicroelectronics HTS221 sensor Driver" |
| depends on (I2C || SPI) |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select HTS221_I2C if (I2C) |
| select HTS221_SPI if (SPI_MASTER) |
| help |
| Say yes here to build support for STMicroelectronics HTS221 |
| temperature-humidity sensor |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hts221. |
| |
| config HTS221_I2C |
| tristate |
| depends on HTS221 |
| select REGMAP_I2C |
| |
| config HTS221_SPI |
| tristate |
| depends on HTS221 |
| select REGMAP_SPI |
| |
| config HTU21 |
| tristate "Measurement Specialties HTU21 humidity & temperature sensor" |
| depends on I2C |
| select IIO_MS_SENSORS_I2C |
| help |
| If you say yes here you get support for the Measurement Specialties |
| HTU21 humidity and temperature sensor. |
| This driver is also used for MS8607 temperature, pressure & humidity |
| sensor |
| |
| This driver can also be built as a module. If so, the module will |
| be called htu21. |
| |
| config SI7005 |
| tristate "SI7005 relative humidity and temperature sensor" |
| depends on I2C |
| help |
| Say yes here to build support for the Silabs Si7005 relative |
| humidity and temperature sensor. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called si7005. This driver also |
| supports Hoperf TH02 Humidity and Temperature Sensor. |
| |
| config SI7020 |
| tristate "Si7013/20/21 Relative Humidity and Temperature Sensors" |
| depends on I2C |
| help |
| Say yes here to build support for the Silicon Labs Si7013/20/21 |
| Relative Humidity and Temperature Sensors. This driver also |
| supports Hoperf TH06 Humidity and Temperature Sensor. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called si7020. |
| |
| endmenu |
