| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/time.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/reset-controller.h> |
| |
| #include "ufshcd.h" |
| #include "ufshcd-pltfrm.h" |
| #include "unipro.h" |
| #include "ufs-qcom.h" |
| #include "ufshci.h" |
| #include "ufs_quirks.h" |
| #define UFS_QCOM_DEFAULT_DBG_PRINT_EN \ |
| (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN) |
| |
| enum { |
| TSTBUS_UAWM, |
| TSTBUS_UARM, |
| TSTBUS_TXUC, |
| TSTBUS_RXUC, |
| TSTBUS_DFC, |
| TSTBUS_TRLUT, |
| TSTBUS_TMRLUT, |
| TSTBUS_OCSC, |
| TSTBUS_UTP_HCI, |
| TSTBUS_COMBINED, |
| TSTBUS_WRAPPER, |
| TSTBUS_UNIPRO, |
| TSTBUS_MAX, |
| }; |
| |
| static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS]; |
| |
| static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote); |
| static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); |
| static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, |
| u32 clk_cycles); |
| |
| static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) |
| { |
| return container_of(rcd, struct ufs_qcom_host, rcdev); |
| } |
| |
| static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len, |
| const char *prefix, void *priv) |
| { |
| ufshcd_dump_regs(hba, offset, len * 4, prefix); |
| } |
| |
| static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes) |
| { |
| int err = 0; |
| |
| err = ufshcd_dme_get(hba, |
| UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes); |
| if (err) |
| dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n", |
| __func__, err); |
| |
| return err; |
| } |
| |
| static int ufs_qcom_host_clk_get(struct device *dev, |
| const char *name, struct clk **clk_out, bool optional) |
| { |
| struct clk *clk; |
| int err = 0; |
| |
| clk = devm_clk_get(dev, name); |
| if (!IS_ERR(clk)) { |
| *clk_out = clk; |
| return 0; |
| } |
| |
| err = PTR_ERR(clk); |
| |
| if (optional && err == -ENOENT) { |
| *clk_out = NULL; |
| return 0; |
| } |
| |
| if (err != -EPROBE_DEFER) |
| dev_err(dev, "failed to get %s err %d\n", name, err); |
| |
| return err; |
| } |
| |
| static int ufs_qcom_host_clk_enable(struct device *dev, |
| const char *name, struct clk *clk) |
| { |
| int err = 0; |
| |
| err = clk_prepare_enable(clk); |
| if (err) |
| dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err); |
| |
| return err; |
| } |
| |
| static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) |
| { |
| if (!host->is_lane_clks_enabled) |
| return; |
| |
| clk_disable_unprepare(host->tx_l1_sync_clk); |
| clk_disable_unprepare(host->tx_l0_sync_clk); |
| clk_disable_unprepare(host->rx_l1_sync_clk); |
| clk_disable_unprepare(host->rx_l0_sync_clk); |
| |
| host->is_lane_clks_enabled = false; |
| } |
| |
| static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) |
| { |
| int err = 0; |
| struct device *dev = host->hba->dev; |
| |
| if (host->is_lane_clks_enabled) |
| return 0; |
| |
| err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk", |
| host->rx_l0_sync_clk); |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk", |
| host->tx_l0_sync_clk); |
| if (err) |
| goto disable_rx_l0; |
| |
| err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", |
| host->rx_l1_sync_clk); |
| if (err) |
| goto disable_tx_l0; |
| |
| err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", |
| host->tx_l1_sync_clk); |
| if (err) |
| goto disable_rx_l1; |
| |
| host->is_lane_clks_enabled = true; |
| goto out; |
| |
| disable_rx_l1: |
| clk_disable_unprepare(host->rx_l1_sync_clk); |
| disable_tx_l0: |
| clk_disable_unprepare(host->tx_l0_sync_clk); |
| disable_rx_l0: |
| clk_disable_unprepare(host->rx_l0_sync_clk); |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) |
| { |
| int err = 0; |
| struct device *dev = host->hba->dev; |
| |
| if (has_acpi_companion(dev)) |
| return 0; |
| |
| err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk", |
| &host->rx_l0_sync_clk, false); |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk", |
| &host->tx_l0_sync_clk, false); |
| if (err) |
| goto out; |
| |
| /* In case of single lane per direction, don't read lane1 clocks */ |
| if (host->hba->lanes_per_direction > 1) { |
| err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", |
| &host->rx_l1_sync_clk, false); |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", |
| &host->tx_l1_sync_clk, true); |
| } |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba) |
| { |
| u32 tx_lanes; |
| |
| return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes); |
| } |
| |
| static int ufs_qcom_check_hibern8(struct ufs_hba *hba) |
| { |
| int err; |
| u32 tx_fsm_val = 0; |
| unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); |
| |
| do { |
| err = ufshcd_dme_get(hba, |
| UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, |
| UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), |
| &tx_fsm_val); |
| if (err || tx_fsm_val == TX_FSM_HIBERN8) |
| break; |
| |
| /* sleep for max. 200us */ |
| usleep_range(100, 200); |
| } while (time_before(jiffies, timeout)); |
| |
| /* |
| * we might have scheduled out for long during polling so |
| * check the state again. |
| */ |
| if (time_after(jiffies, timeout)) |
| err = ufshcd_dme_get(hba, |
| UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, |
| UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), |
| &tx_fsm_val); |
| |
| if (err) { |
| dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", |
| __func__, err); |
| } else if (tx_fsm_val != TX_FSM_HIBERN8) { |
| err = tx_fsm_val; |
| dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", |
| __func__, err); |
| } |
| |
| return err; |
| } |
| |
| static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) |
| { |
| ufshcd_rmwl(host->hba, QUNIPRO_SEL, |
| ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0, |
| REG_UFS_CFG1); |
| /* make sure above configuration is applied before we return */ |
| mb(); |
| } |
| |
| static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| struct phy *phy = host->generic_phy; |
| int ret = 0; |
| bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B) |
| ? true : false; |
| |
| if (is_rate_B) |
| phy_set_mode(phy, PHY_MODE_UFS_HS_B); |
| |
| /* phy initialization - calibrate the phy */ |
| ret = phy_init(phy); |
| if (ret) { |
| dev_err(hba->dev, "%s: phy init failed, ret = %d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| /* power on phy - start serdes and phy's power and clocks */ |
| ret = phy_power_on(phy); |
| if (ret) { |
| dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", |
| __func__, ret); |
| goto out_disable_phy; |
| } |
| |
| ufs_qcom_select_unipro_mode(host); |
| |
| return 0; |
| |
| out_disable_phy: |
| phy_exit(phy); |
| out: |
| return ret; |
| } |
| |
| /* |
| * The UTP controller has a number of internal clock gating cells (CGCs). |
| * Internal hardware sub-modules within the UTP controller control the CGCs. |
| * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved |
| * in a specific operation, UTP controller CGCs are by default disabled and |
| * this function enables them (after every UFS link startup) to save some power |
| * leakage. |
| */ |
| static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) |
| { |
| ufshcd_writel(hba, |
| ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL, |
| REG_UFS_CFG2); |
| |
| /* Ensure that HW clock gating is enabled before next operations */ |
| mb(); |
| } |
| |
| static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, |
| enum ufs_notify_change_status status) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| int err = 0; |
| |
| switch (status) { |
| case PRE_CHANGE: |
| ufs_qcom_power_up_sequence(hba); |
| /* |
| * The PHY PLL output is the source of tx/rx lane symbol |
| * clocks, hence, enable the lane clocks only after PHY |
| * is initialized. |
| */ |
| err = ufs_qcom_enable_lane_clks(host); |
| break; |
| case POST_CHANGE: |
| /* check if UFS PHY moved from DISABLED to HIBERN8 */ |
| err = ufs_qcom_check_hibern8(hba); |
| ufs_qcom_enable_hw_clk_gating(hba); |
| |
| break; |
| default: |
| dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); |
| err = -EINVAL; |
| break; |
| } |
| return err; |
| } |
| |
| /** |
| * Returns zero for success and non-zero in case of a failure |
| */ |
| static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, |
| u32 hs, u32 rate, bool update_link_startup_timer) |
| { |
| int ret = 0; |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| struct ufs_clk_info *clki; |
| u32 core_clk_period_in_ns; |
| u32 tx_clk_cycles_per_us = 0; |
| unsigned long core_clk_rate = 0; |
| u32 core_clk_cycles_per_us = 0; |
| |
| static u32 pwm_fr_table[][2] = { |
| {UFS_PWM_G1, 0x1}, |
| {UFS_PWM_G2, 0x1}, |
| {UFS_PWM_G3, 0x1}, |
| {UFS_PWM_G4, 0x1}, |
| }; |
| |
| static u32 hs_fr_table_rA[][2] = { |
| {UFS_HS_G1, 0x1F}, |
| {UFS_HS_G2, 0x3e}, |
| {UFS_HS_G3, 0x7D}, |
| }; |
| |
| static u32 hs_fr_table_rB[][2] = { |
| {UFS_HS_G1, 0x24}, |
| {UFS_HS_G2, 0x49}, |
| {UFS_HS_G3, 0x92}, |
| }; |
| |
| /* |
| * The Qunipro controller does not use following registers: |
| * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG & |
| * UFS_REG_PA_LINK_STARTUP_TIMER |
| * But UTP controller uses SYS1CLK_1US_REG register for Interrupt |
| * Aggregation logic. |
| */ |
| if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba)) |
| goto out; |
| |
| if (gear == 0) { |
| dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); |
| goto out_error; |
| } |
| |
| list_for_each_entry(clki, &hba->clk_list_head, list) { |
| if (!strcmp(clki->name, "core_clk")) |
| core_clk_rate = clk_get_rate(clki->clk); |
| } |
| |
| /* If frequency is smaller than 1MHz, set to 1MHz */ |
| if (core_clk_rate < DEFAULT_CLK_RATE_HZ) |
| core_clk_rate = DEFAULT_CLK_RATE_HZ; |
| |
| core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; |
| if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) { |
| ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); |
| /* |
| * make sure above write gets applied before we return from |
| * this function. |
| */ |
| mb(); |
| } |
| |
| if (ufs_qcom_cap_qunipro(host)) |
| goto out; |
| |
| core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate; |
| core_clk_period_in_ns <<= OFFSET_CLK_NS_REG; |
| core_clk_period_in_ns &= MASK_CLK_NS_REG; |
| |
| switch (hs) { |
| case FASTAUTO_MODE: |
| case FAST_MODE: |
| if (rate == PA_HS_MODE_A) { |
| if (gear > ARRAY_SIZE(hs_fr_table_rA)) { |
| dev_err(hba->dev, |
| "%s: index %d exceeds table size %zu\n", |
| __func__, gear, |
| ARRAY_SIZE(hs_fr_table_rA)); |
| goto out_error; |
| } |
| tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1]; |
| } else if (rate == PA_HS_MODE_B) { |
| if (gear > ARRAY_SIZE(hs_fr_table_rB)) { |
| dev_err(hba->dev, |
| "%s: index %d exceeds table size %zu\n", |
| __func__, gear, |
| ARRAY_SIZE(hs_fr_table_rB)); |
| goto out_error; |
| } |
| tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1]; |
| } else { |
| dev_err(hba->dev, "%s: invalid rate = %d\n", |
| __func__, rate); |
| goto out_error; |
| } |
| break; |
| case SLOWAUTO_MODE: |
| case SLOW_MODE: |
| if (gear > ARRAY_SIZE(pwm_fr_table)) { |
| dev_err(hba->dev, |
| "%s: index %d exceeds table size %zu\n", |
| __func__, gear, |
| ARRAY_SIZE(pwm_fr_table)); |
| goto out_error; |
| } |
| tx_clk_cycles_per_us = pwm_fr_table[gear-1][1]; |
| break; |
| case UNCHANGED: |
| default: |
| dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs); |
| goto out_error; |
| } |
| |
| if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) != |
| (core_clk_period_in_ns | tx_clk_cycles_per_us)) { |
| /* this register 2 fields shall be written at once */ |
| ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us, |
| REG_UFS_TX_SYMBOL_CLK_NS_US); |
| /* |
| * make sure above write gets applied before we return from |
| * this function. |
| */ |
| mb(); |
| } |
| |
| if (update_link_startup_timer) { |
| ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100), |
| REG_UFS_PA_LINK_STARTUP_TIMER); |
| /* |
| * make sure that this configuration is applied before |
| * we return |
| */ |
| mb(); |
| } |
| goto out; |
| |
| out_error: |
| ret = -EINVAL; |
| out: |
| return ret; |
| } |
| |
| static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, |
| enum ufs_notify_change_status status) |
| { |
| int err = 0; |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| switch (status) { |
| case PRE_CHANGE: |
| if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE, |
| 0, true)) { |
| dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", |
| __func__); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| if (ufs_qcom_cap_qunipro(host)) |
| /* |
| * set unipro core clock cycles to 150 & clear clock |
| * divider |
| */ |
| err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, |
| 150); |
| |
| /* |
| * Some UFS devices (and may be host) have issues if LCC is |
| * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 |
| * before link startup which will make sure that both host |
| * and device TX LCC are disabled once link startup is |
| * completed. |
| */ |
| if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) |
| err = ufshcd_dme_set(hba, |
| UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), |
| 0); |
| |
| break; |
| case POST_CHANGE: |
| ufs_qcom_link_startup_post_change(hba); |
| break; |
| default: |
| break; |
| } |
| |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| struct phy *phy = host->generic_phy; |
| int ret = 0; |
| |
| if (ufs_qcom_is_link_off(hba)) { |
| /* |
| * Disable the tx/rx lane symbol clocks before PHY is |
| * powered down as the PLL source should be disabled |
| * after downstream clocks are disabled. |
| */ |
| ufs_qcom_disable_lane_clks(host); |
| phy_power_off(phy); |
| |
| } else if (!ufs_qcom_is_link_active(hba)) { |
| ufs_qcom_disable_lane_clks(host); |
| } |
| |
| return ret; |
| } |
| |
| static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| struct phy *phy = host->generic_phy; |
| int err; |
| |
| if (ufs_qcom_is_link_off(hba)) { |
| err = phy_power_on(phy); |
| if (err) { |
| dev_err(hba->dev, "%s: failed PHY power on: %d\n", |
| __func__, err); |
| return err; |
| } |
| |
| err = ufs_qcom_enable_lane_clks(host); |
| if (err) |
| return err; |
| |
| } else if (!ufs_qcom_is_link_active(hba)) { |
| err = ufs_qcom_enable_lane_clks(host); |
| if (err) |
| return err; |
| } |
| |
| hba->is_sys_suspended = false; |
| return 0; |
| } |
| |
| #ifdef CONFIG_MSM_BUS_SCALING |
| static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, |
| const char *speed_mode) |
| { |
| struct device *dev = host->hba->dev; |
| struct device_node *np = dev->of_node; |
| int err; |
| const char *key = "qcom,bus-vector-names"; |
| |
| if (!speed_mode) { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN")) |
| err = of_property_match_string(np, key, "MAX"); |
| else |
| err = of_property_match_string(np, key, speed_mode); |
| |
| out: |
| if (err < 0) |
| dev_err(dev, "%s: Invalid %s mode %d\n", |
| __func__, speed_mode, err); |
| return err; |
| } |
| |
| static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result) |
| { |
| int gear = max_t(u32, p->gear_rx, p->gear_tx); |
| int lanes = max_t(u32, p->lane_rx, p->lane_tx); |
| int pwr; |
| |
| /* default to PWM Gear 1, Lane 1 if power mode is not initialized */ |
| if (!gear) |
| gear = 1; |
| |
| if (!lanes) |
| lanes = 1; |
| |
| if (!p->pwr_rx && !p->pwr_tx) { |
| pwr = SLOWAUTO_MODE; |
| snprintf(result, BUS_VECTOR_NAME_LEN, "MIN"); |
| } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE || |
| p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) { |
| pwr = FAST_MODE; |
| snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS", |
| p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes); |
| } else { |
| pwr = SLOW_MODE; |
| snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d", |
| "PWM", gear, lanes); |
| } |
| } |
| |
| static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote) |
| { |
| int err = 0; |
| |
| if (vote != host->bus_vote.curr_vote) { |
| err = msm_bus_scale_client_update_request( |
| host->bus_vote.client_handle, vote); |
| if (err) { |
| dev_err(host->hba->dev, |
| "%s: msm_bus_scale_client_update_request() failed: bus_client_handle=0x%x, vote=%d, err=%d\n", |
| __func__, host->bus_vote.client_handle, |
| vote, err); |
| goto out; |
| } |
| |
| host->bus_vote.curr_vote = vote; |
| } |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host) |
| { |
| int vote; |
| int err = 0; |
| char mode[BUS_VECTOR_NAME_LEN]; |
| |
| ufs_qcom_get_speed_mode(&host->dev_req_params, mode); |
| |
| vote = ufs_qcom_get_bus_vote(host, mode); |
| if (vote >= 0) |
| err = ufs_qcom_set_bus_vote(host, vote); |
| else |
| err = vote; |
| |
| if (err) |
| dev_err(host->hba->dev, "%s: failed %d\n", __func__, err); |
| else |
| host->bus_vote.saved_vote = vote; |
| return err; |
| } |
| |
| static ssize_t |
| show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ufs_hba *hba = dev_get_drvdata(dev); |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| return snprintf(buf, PAGE_SIZE, "%u\n", |
| host->bus_vote.is_max_bw_needed); |
| } |
| |
| static ssize_t |
| store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ufs_hba *hba = dev_get_drvdata(dev); |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| uint32_t value; |
| |
| if (!kstrtou32(buf, 0, &value)) { |
| host->bus_vote.is_max_bw_needed = !!value; |
| ufs_qcom_update_bus_bw_vote(host); |
| } |
| |
| return count; |
| } |
| |
| static int ufs_qcom_bus_register(struct ufs_qcom_host *host) |
| { |
| int err; |
| struct msm_bus_scale_pdata *bus_pdata; |
| struct device *dev = host->hba->dev; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct device_node *np = dev->of_node; |
| |
| bus_pdata = msm_bus_cl_get_pdata(pdev); |
| if (!bus_pdata) { |
| dev_err(dev, "%s: failed to get bus vectors\n", __func__); |
| err = -ENODATA; |
| goto out; |
| } |
| |
| err = of_property_count_strings(np, "qcom,bus-vector-names"); |
| if (err < 0 || err != bus_pdata->num_usecases) { |
| dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| host->bus_vote.client_handle = msm_bus_scale_register_client(bus_pdata); |
| if (!host->bus_vote.client_handle) { |
| dev_err(dev, "%s: msm_bus_scale_register_client failed\n", |
| __func__); |
| err = -EFAULT; |
| goto out; |
| } |
| |
| /* cache the vote index for minimum and maximum bandwidth */ |
| host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN"); |
| host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX"); |
| |
| host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw; |
| host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw; |
| sysfs_attr_init(&host->bus_vote.max_bus_bw.attr); |
| host->bus_vote.max_bus_bw.attr.name = "max_bus_bw"; |
| host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR; |
| err = device_create_file(dev, &host->bus_vote.max_bus_bw); |
| out: |
| return err; |
| } |
| #else /* CONFIG_MSM_BUS_SCALING */ |
| static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host) |
| { |
| return 0; |
| } |
| |
| static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote) |
| { |
| return 0; |
| } |
| |
| static int ufs_qcom_bus_register(struct ufs_qcom_host *host) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_MSM_BUS_SCALING */ |
| |
| static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable) |
| { |
| if (host->dev_ref_clk_ctrl_mmio && |
| (enable ^ host->is_dev_ref_clk_enabled)) { |
| u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio); |
| |
| if (enable) |
| temp |= host->dev_ref_clk_en_mask; |
| else |
| temp &= ~host->dev_ref_clk_en_mask; |
| |
| /* |
| * If we are here to disable this clock it might be immediately |
| * after entering into hibern8 in which case we need to make |
| * sure that device ref_clk is active at least 1us after the |
| * hibern8 enter. |
| */ |
| if (!enable) |
| udelay(1); |
| |
| writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio); |
| |
| /* ensure that ref_clk is enabled/disabled before we return */ |
| wmb(); |
| |
| /* |
| * If we call hibern8 exit after this, we need to make sure that |
| * device ref_clk is stable for at least 1us before the hibern8 |
| * exit command. |
| */ |
| if (enable) |
| udelay(1); |
| |
| host->is_dev_ref_clk_enabled = enable; |
| } |
| } |
| |
| static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, |
| enum ufs_notify_change_status status, |
| struct ufs_pa_layer_attr *dev_max_params, |
| struct ufs_pa_layer_attr *dev_req_params) |
| { |
| u32 val; |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| struct ufs_dev_params ufs_qcom_cap; |
| int ret = 0; |
| |
| if (!dev_req_params) { |
| pr_err("%s: incoming dev_req_params is NULL\n", __func__); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| switch (status) { |
| case PRE_CHANGE: |
| ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX; |
| ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX; |
| ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX; |
| ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX; |
| ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX; |
| ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX; |
| ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM; |
| ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM; |
| ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS; |
| ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS; |
| ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; |
| ufs_qcom_cap.desired_working_mode = |
| UFS_QCOM_LIMIT_DESIRED_MODE; |
| |
| if (host->hw_ver.major == 0x1) { |
| /* |
| * HS-G3 operations may not reliably work on legacy QCOM |
| * UFS host controller hardware even though capability |
| * exchange during link startup phase may end up |
| * negotiating maximum supported gear as G3. |
| * Hence downgrade the maximum supported gear to HS-G2. |
| */ |
| if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2) |
| ufs_qcom_cap.hs_tx_gear = UFS_HS_G2; |
| if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2) |
| ufs_qcom_cap.hs_rx_gear = UFS_HS_G2; |
| } |
| |
| ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, |
| dev_max_params, |
| dev_req_params); |
| if (ret) { |
| pr_err("%s: failed to determine capabilities\n", |
| __func__); |
| goto out; |
| } |
| |
| /* enable the device ref clock before changing to HS mode */ |
| if (!ufshcd_is_hs_mode(&hba->pwr_info) && |
| ufshcd_is_hs_mode(dev_req_params)) |
| ufs_qcom_dev_ref_clk_ctrl(host, true); |
| break; |
| case POST_CHANGE: |
| if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, |
| dev_req_params->pwr_rx, |
| dev_req_params->hs_rate, false)) { |
| dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", |
| __func__); |
| /* |
| * we return error code at the end of the routine, |
| * but continue to configure UFS_PHY_TX_LANE_ENABLE |
| * and bus voting as usual |
| */ |
| ret = -EINVAL; |
| } |
| |
| val = ~(MAX_U32 << dev_req_params->lane_tx); |
| |
| /* cache the power mode parameters to use internally */ |
| memcpy(&host->dev_req_params, |
| dev_req_params, sizeof(*dev_req_params)); |
| ufs_qcom_update_bus_bw_vote(host); |
| |
| /* disable the device ref clock if entered PWM mode */ |
| if (ufshcd_is_hs_mode(&hba->pwr_info) && |
| !ufshcd_is_hs_mode(dev_req_params)) |
| ufs_qcom_dev_ref_clk_ctrl(host, false); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| out: |
| return ret; |
| } |
| |
| static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) |
| { |
| int err; |
| u32 pa_vs_config_reg1; |
| |
| err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), |
| &pa_vs_config_reg1); |
| if (err) |
| goto out; |
| |
| /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ |
| err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), |
| (pa_vs_config_reg1 | (1 << 12))); |
| |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) |
| { |
| int err = 0; |
| |
| if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME) |
| err = ufs_qcom_quirk_host_pa_saveconfigtime(hba); |
| |
| return err; |
| } |
| |
| static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| if (host->hw_ver.major == 0x1) |
| return UFSHCI_VERSION_11; |
| else |
| return UFSHCI_VERSION_20; |
| } |
| |
| /** |
| * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks |
| * @hba: host controller instance |
| * |
| * QCOM UFS host controller might have some non standard behaviours (quirks) |
| * than what is specified by UFSHCI specification. Advertise all such |
| * quirks to standard UFS host controller driver so standard takes them into |
| * account. |
| */ |
| static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| if (host->hw_ver.major == 0x01) { |
| hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS |
| | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP |
| | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE; |
| |
| if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001) |
| hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR; |
| |
| hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC; |
| } |
| |
| if (host->hw_ver.major == 0x2) { |
| hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; |
| |
| if (!ufs_qcom_cap_qunipro(host)) |
| /* Legacy UniPro mode still need following quirks */ |
| hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS |
| | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE |
| | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP); |
| } |
| } |
| |
| static void ufs_qcom_set_caps(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; |
| hba->caps |= UFSHCD_CAP_CLK_SCALING; |
| hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; |
| |
| if (host->hw_ver.major >= 0x2) { |
| host->caps = UFS_QCOM_CAP_QUNIPRO | |
| UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE; |
| } |
| } |
| |
| /** |
| * ufs_qcom_setup_clocks - enables/disable clocks |
| * @hba: host controller instance |
| * @on: If true, enable clocks else disable them. |
| * @status: PRE_CHANGE or POST_CHANGE notify |
| * |
| * Returns 0 on success, non-zero on failure. |
| */ |
| static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, |
| enum ufs_notify_change_status status) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| int err; |
| int vote = 0; |
| |
| /* |
| * In case ufs_qcom_init() is not yet done, simply ignore. |
| * This ufs_qcom_setup_clocks() shall be called from |
| * ufs_qcom_init() after init is done. |
| */ |
| if (!host) |
| return 0; |
| |
| if (on && (status == POST_CHANGE)) { |
| /* enable the device ref clock for HS mode*/ |
| if (ufshcd_is_hs_mode(&hba->pwr_info)) |
| ufs_qcom_dev_ref_clk_ctrl(host, true); |
| vote = host->bus_vote.saved_vote; |
| if (vote == host->bus_vote.min_bw_vote) |
| ufs_qcom_update_bus_bw_vote(host); |
| |
| } else if (!on && (status == PRE_CHANGE)) { |
| if (!ufs_qcom_is_link_active(hba)) { |
| /* disable device ref_clk */ |
| ufs_qcom_dev_ref_clk_ctrl(host, false); |
| } |
| |
| vote = host->bus_vote.min_bw_vote; |
| } |
| |
| err = ufs_qcom_set_bus_vote(host, vote); |
| if (err) |
| dev_err(hba->dev, "%s: set bus vote failed %d\n", |
| __func__, err); |
| |
| return err; |
| } |
| |
| static int |
| ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) |
| { |
| struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); |
| |
| /* Currently this code only knows about a single reset. */ |
| WARN_ON(id); |
| ufs_qcom_assert_reset(host->hba); |
| /* provide 1ms delay to let the reset pulse propagate. */ |
| usleep_range(1000, 1100); |
| return 0; |
| } |
| |
| static int |
| ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) |
| { |
| struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); |
| |
| /* Currently this code only knows about a single reset. */ |
| WARN_ON(id); |
| ufs_qcom_deassert_reset(host->hba); |
| |
| /* |
| * after reset deassertion, phy will need all ref clocks, |
| * voltage, current to settle down before starting serdes. |
| */ |
| usleep_range(1000, 1100); |
| return 0; |
| } |
| |
| static const struct reset_control_ops ufs_qcom_reset_ops = { |
| .assert = ufs_qcom_reset_assert, |
| .deassert = ufs_qcom_reset_deassert, |
| }; |
| |
| #define ANDROID_BOOT_DEV_MAX 30 |
| static char android_boot_dev[ANDROID_BOOT_DEV_MAX]; |
| |
| #ifndef MODULE |
| static int __init get_android_boot_dev(char *str) |
| { |
| strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX); |
| return 1; |
| } |
| __setup("androidboot.bootdevice=", get_android_boot_dev); |
| #endif |
| |
| /** |
| * ufs_qcom_init - bind phy with controller |
| * @hba: host controller instance |
| * |
| * Binds PHY with controller and powers up PHY enabling clocks |
| * and regulators. |
| * |
| * Returns -EPROBE_DEFER if binding fails, returns negative error |
| * on phy power up failure and returns zero on success. |
| */ |
| static int ufs_qcom_init(struct ufs_hba *hba) |
| { |
| int err; |
| struct device *dev = hba->dev; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ufs_qcom_host *host; |
| struct resource *res; |
| |
| if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev))) |
| return -ENODEV; |
| |
| host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); |
| if (!host) { |
| err = -ENOMEM; |
| dev_err(dev, "%s: no memory for qcom ufs host\n", __func__); |
| goto out; |
| } |
| |
| /* Make a two way bind between the qcom host and the hba */ |
| host->hba = hba; |
| ufshcd_set_variant(hba, host); |
| |
| /* Fire up the reset controller. Failure here is non-fatal. */ |
| host->rcdev.of_node = dev->of_node; |
| host->rcdev.ops = &ufs_qcom_reset_ops; |
| host->rcdev.owner = dev->driver->owner; |
| host->rcdev.nr_resets = 1; |
| err = devm_reset_controller_register(dev, &host->rcdev); |
| if (err) { |
| dev_warn(dev, "Failed to register reset controller\n"); |
| err = 0; |
| } |
| |
| /* |
| * voting/devoting device ref_clk source is time consuming hence |
| * skip devoting it during aggressive clock gating. This clock |
| * will still be gated off during runtime suspend. |
| */ |
| host->generic_phy = devm_phy_get(dev, "ufsphy"); |
| |
| if (host->generic_phy == ERR_PTR(-EPROBE_DEFER)) { |
| /* |
| * UFS driver might be probed before the phy driver does. |
| * In that case we would like to return EPROBE_DEFER code. |
| */ |
| err = -EPROBE_DEFER; |
| dev_warn(dev, "%s: required phy device. hasn't probed yet. err = %d\n", |
| __func__, err); |
| goto out_variant_clear; |
| } else if (IS_ERR(host->generic_phy)) { |
| if (has_acpi_companion(dev)) { |
| host->generic_phy = NULL; |
| } else { |
| err = PTR_ERR(host->generic_phy); |
| dev_err(dev, "%s: PHY get failed %d\n", __func__, err); |
| goto out_variant_clear; |
| } |
| } |
| |
| err = ufs_qcom_bus_register(host); |
| if (err) |
| goto out_variant_clear; |
| |
| ufs_qcom_get_controller_revision(hba, &host->hw_ver.major, |
| &host->hw_ver.minor, &host->hw_ver.step); |
| |
| /* |
| * for newer controllers, device reference clock control bit has |
| * moved inside UFS controller register address space itself. |
| */ |
| if (host->hw_ver.major >= 0x02) { |
| host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1; |
| host->dev_ref_clk_en_mask = BIT(26); |
| } else { |
| /* "dev_ref_clk_ctrl_mem" is optional resource */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| host->dev_ref_clk_ctrl_mmio = |
| devm_ioremap_resource(dev, res); |
| if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) { |
| dev_warn(dev, |
| "%s: could not map dev_ref_clk_ctrl_mmio, err %ld\n", |
| __func__, |
| PTR_ERR(host->dev_ref_clk_ctrl_mmio)); |
| host->dev_ref_clk_ctrl_mmio = NULL; |
| } |
| host->dev_ref_clk_en_mask = BIT(5); |
| } |
| } |
| |
| err = ufs_qcom_init_lane_clks(host); |
| if (err) |
| goto out_variant_clear; |
| |
| ufs_qcom_set_caps(hba); |
| ufs_qcom_advertise_quirks(hba); |
| |
| ufs_qcom_setup_clocks(hba, true, POST_CHANGE); |
| |
| if (hba->dev->id < MAX_UFS_QCOM_HOSTS) |
| ufs_qcom_hosts[hba->dev->id] = host; |
| |
| host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN; |
| ufs_qcom_get_default_testbus_cfg(host); |
| err = ufs_qcom_testbus_config(host); |
| if (err) { |
| dev_warn(dev, "%s: failed to configure the testbus %d\n", |
| __func__, err); |
| err = 0; |
| } |
| |
| goto out; |
| |
| out_variant_clear: |
| ufshcd_set_variant(hba, NULL); |
| out: |
| return err; |
| } |
| |
| static void ufs_qcom_exit(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| ufs_qcom_disable_lane_clks(host); |
| phy_power_off(host->generic_phy); |
| phy_exit(host->generic_phy); |
| } |
| |
| static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, |
| u32 clk_cycles) |
| { |
| int err; |
| u32 core_clk_ctrl_reg; |
| |
| if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK) |
| return -EINVAL; |
| |
| err = ufshcd_dme_get(hba, |
| UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), |
| &core_clk_ctrl_reg); |
| if (err) |
| goto out; |
| |
| core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK; |
| core_clk_ctrl_reg |= clk_cycles; |
| |
| /* Clear CORE_CLK_DIV_EN */ |
| core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; |
| |
| err = ufshcd_dme_set(hba, |
| UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), |
| core_clk_ctrl_reg); |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) |
| { |
| /* nothing to do as of now */ |
| return 0; |
| } |
| |
| static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| if (!ufs_qcom_cap_qunipro(host)) |
| return 0; |
| |
| /* set unipro core clock cycles to 150 and clear clock divider */ |
| return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150); |
| } |
| |
| static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| int err; |
| u32 core_clk_ctrl_reg; |
| |
| if (!ufs_qcom_cap_qunipro(host)) |
| return 0; |
| |
| err = ufshcd_dme_get(hba, |
| UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), |
| &core_clk_ctrl_reg); |
| |
| /* make sure CORE_CLK_DIV_EN is cleared */ |
| if (!err && |
| (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) { |
| core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; |
| err = ufshcd_dme_set(hba, |
| UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), |
| core_clk_ctrl_reg); |
| } |
| |
| return err; |
| } |
| |
| static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| |
| if (!ufs_qcom_cap_qunipro(host)) |
| return 0; |
| |
| /* set unipro core clock cycles to 75 and clear clock divider */ |
| return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75); |
| } |
| |
| static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, |
| bool scale_up, enum ufs_notify_change_status status) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params; |
| int err = 0; |
| |
| if (status == PRE_CHANGE) { |
| if (scale_up) |
| err = ufs_qcom_clk_scale_up_pre_change(hba); |
| else |
| err = ufs_qcom_clk_scale_down_pre_change(hba); |
| } else { |
| if (scale_up) |
| err = ufs_qcom_clk_scale_up_post_change(hba); |
| else |
| err = ufs_qcom_clk_scale_down_post_change(hba); |
| |
| if (err || !dev_req_params) |
| goto out; |
| |
| ufs_qcom_cfg_timers(hba, |
| dev_req_params->gear_rx, |
| dev_req_params->pwr_rx, |
| dev_req_params->hs_rate, |
| false); |
| ufs_qcom_update_bus_bw_vote(host); |
| } |
| |
| out: |
| return err; |
| } |
| |
| static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba, |
| void *priv, void (*print_fn)(struct ufs_hba *hba, |
| int offset, int num_regs, const char *str, void *priv)) |
| { |
| u32 reg; |
| struct ufs_qcom_host *host; |
| |
| if (unlikely(!hba)) { |
| pr_err("%s: hba is NULL\n", __func__); |
| return; |
| } |
| if (unlikely(!print_fn)) { |
| dev_err(hba->dev, "%s: print_fn is NULL\n", __func__); |
| return; |
| } |
| |
| host = ufshcd_get_variant(hba); |
| if (!(host->dbg_print_en & UFS_QCOM_DBG_PRINT_REGS_EN)) |
| return; |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC); |
| print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv); |
| |
| reg = ufshcd_readl(hba, REG_UFS_CFG1); |
| reg |= UTP_DBG_RAMS_EN; |
| ufshcd_writel(hba, reg, REG_UFS_CFG1); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM); |
| print_fn(hba, reg, 32, "UFS_UFS_DBG_RD_EDTL_RAM ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM); |
| print_fn(hba, reg, 128, "UFS_UFS_DBG_RD_DESC_RAM ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM); |
| print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv); |
| |
| /* clear bit 17 - UTP_DBG_RAMS_EN */ |
| ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM); |
| print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM); |
| print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UARM ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC); |
| print_fn(hba, reg, 48, "UFS_DBG_RD_REG_TXUC ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC); |
| print_fn(hba, reg, 27, "UFS_DBG_RD_REG_RXUC ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC); |
| print_fn(hba, reg, 19, "UFS_DBG_RD_REG_DFC ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT); |
| print_fn(hba, reg, 34, "UFS_DBG_RD_REG_TRLUT ", priv); |
| |
| reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT); |
| print_fn(hba, reg, 9, "UFS_DBG_RD_REG_TMRLUT ", priv); |
| } |
| |
| static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) |
| { |
| if (host->dbg_print_en & UFS_QCOM_DBG_PRINT_TEST_BUS_EN) { |
| ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, |
| UFS_REG_TEST_BUS_EN, REG_UFS_CFG1); |
| ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1); |
| } else { |
| ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 0, REG_UFS_CFG1); |
| ufshcd_rmwl(host->hba, TEST_BUS_EN, 0, REG_UFS_CFG1); |
| } |
| } |
| |
| static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host) |
| { |
| /* provide a legal default configuration */ |
| host->testbus.select_major = TSTBUS_UNIPRO; |
| host->testbus.select_minor = 37; |
| } |
| |
| static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) |
| { |
| if (host->testbus.select_major >= TSTBUS_MAX) { |
| dev_err(host->hba->dev, |
| "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", |
| __func__, host->testbus.select_major); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int ufs_qcom_testbus_config(struct ufs_qcom_host *host) |
| { |
| int reg; |
| int offset; |
| u32 mask = TEST_BUS_SUB_SEL_MASK; |
| |
| if (!host) |
| return -EINVAL; |
| |
| if (!ufs_qcom_testbus_cfg_is_ok(host)) |
| return -EPERM; |
| |
| switch (host->testbus.select_major) { |
| case TSTBUS_UAWM: |
| reg = UFS_TEST_BUS_CTRL_0; |
| offset = 24; |
| break; |
| case TSTBUS_UARM: |
| reg = UFS_TEST_BUS_CTRL_0; |
| offset = 16; |
| break; |
| case TSTBUS_TXUC: |
| reg = UFS_TEST_BUS_CTRL_0; |
| offset = 8; |
| break; |
| case TSTBUS_RXUC: |
| reg = UFS_TEST_BUS_CTRL_0; |
| offset = 0; |
| break; |
| case TSTBUS_DFC: |
| reg = UFS_TEST_BUS_CTRL_1; |
| offset = 24; |
| break; |
| case TSTBUS_TRLUT: |
| reg = UFS_TEST_BUS_CTRL_1; |
| offset = 16; |
| break; |
| case TSTBUS_TMRLUT: |
| reg = UFS_TEST_BUS_CTRL_1; |
| offset = 8; |
| break; |
| case TSTBUS_OCSC: |
| reg = UFS_TEST_BUS_CTRL_1; |
| offset = 0; |
| break; |
| case TSTBUS_WRAPPER: |
| reg = UFS_TEST_BUS_CTRL_2; |
| offset = 16; |
| break; |
| case TSTBUS_COMBINED: |
| reg = UFS_TEST_BUS_CTRL_2; |
| offset = 8; |
| break; |
| case TSTBUS_UTP_HCI: |
| reg = UFS_TEST_BUS_CTRL_2; |
| offset = 0; |
| break; |
| case TSTBUS_UNIPRO: |
| reg = UFS_UNIPRO_CFG; |
| offset = 20; |
| mask = 0xFFF; |
| break; |
| /* |
| * No need for a default case, since |
| * ufs_qcom_testbus_cfg_is_ok() checks that the configuration |
| * is legal |
| */ |
| } |
| mask <<= offset; |
| |
| pm_runtime_get_sync(host->hba->dev); |
| ufshcd_hold(host->hba, false); |
| ufshcd_rmwl(host->hba, TEST_BUS_SEL, |
| (u32)host->testbus.select_major << 19, |
| REG_UFS_CFG1); |
| ufshcd_rmwl(host->hba, mask, |
| (u32)host->testbus.select_minor << offset, |
| reg); |
| ufs_qcom_enable_test_bus(host); |
| /* |
| * Make sure the test bus configuration is |
| * committed before returning. |
| */ |
| mb(); |
| ufshcd_release(host->hba); |
| pm_runtime_put_sync(host->hba->dev); |
| |
| return 0; |
| } |
| |
| static void ufs_qcom_testbus_read(struct ufs_hba *hba) |
| { |
| ufshcd_dump_regs(hba, UFS_TEST_BUS, 4, "UFS_TEST_BUS "); |
| } |
| |
| static void ufs_qcom_print_unipro_testbus(struct ufs_hba *hba) |
| { |
| struct ufs_qcom_host *host = ufshcd_get_variant(hba); |
| u32 *testbus = NULL; |
| int i, nminor = 256, testbus_len = nminor * sizeof(u32); |
| |
| testbus = kmalloc(testbus_len, GFP_KERNEL); |
| if (!testbus) |
| return; |
| |
| host->testbus.select_major = TSTBUS_UNIPRO; |
| for (i = 0; i < nminor; i++) { |
| host->testbus.select_minor = i; |
| ufs_qcom_testbus_config(host); |
| testbus[i] = ufshcd_readl(hba, UFS_TEST_BUS); |
| } |
| print_hex_dump(KERN_ERR, "UNIPRO_TEST_BUS ", DUMP_PREFIX_OFFSET, |
| 16, 4, testbus, testbus_len, false); |
| kfree(testbus); |
| } |
| |
| static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) |
| { |
| ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4, |
| "HCI Vendor Specific Registers "); |
| |
| /* sleep a bit intermittently as we are dumping too much data */ |
| ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper); |
| usleep_range(1000, 1100); |
| ufs_qcom_testbus_read(hba); |
| usleep_range(1000, 1100); |
| ufs_qcom_print_unipro_testbus(hba); |
| usleep_range(1000, 1100); |
| } |
| |
| /** |
| * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations |
| * |
| * The variant operations configure the necessary controller and PHY |
| * handshake during initialization. |
| */ |
| static struct ufs_hba_variant_ops ufs_hba_qcom_vops = { |
| .name = "qcom", |
| .init = ufs_qcom_init, |
| .exit = ufs_qcom_exit, |
| .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version, |
| .clk_scale_notify = ufs_qcom_clk_scale_notify, |
| .setup_clocks = ufs_qcom_setup_clocks, |
| .hce_enable_notify = ufs_qcom_hce_enable_notify, |
| .link_startup_notify = ufs_qcom_link_startup_notify, |
| .pwr_change_notify = ufs_qcom_pwr_change_notify, |
| .apply_dev_quirks = ufs_qcom_apply_dev_quirks, |
| .suspend = ufs_qcom_suspend, |
| .resume = ufs_qcom_resume, |
| .dbg_register_dump = ufs_qcom_dump_dbg_regs, |
| }; |
| |
| /** |
| * ufs_qcom_probe - probe routine of the driver |
| * @pdev: pointer to Platform device handle |
| * |
| * Return zero for success and non-zero for failure |
| */ |
| static int ufs_qcom_probe(struct platform_device *pdev) |
| { |
| int err; |
| struct device *dev = &pdev->dev; |
| |
| /* Perform generic probe */ |
| err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); |
| if (err) |
| dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err); |
| |
| return err; |
| } |
| |
| /** |
| * ufs_qcom_remove - set driver_data of the device to NULL |
| * @pdev: pointer to platform device handle |
| * |
| * Always returns 0 |
| */ |
| static int ufs_qcom_remove(struct platform_device *pdev) |
| { |
| struct ufs_hba *hba = platform_get_drvdata(pdev); |
| |
| pm_runtime_get_sync(&(pdev)->dev); |
| ufshcd_remove(hba); |
| return 0; |
| } |
| |
| static const struct of_device_id ufs_qcom_of_match[] = { |
| { .compatible = "qcom,ufshc"}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id ufs_qcom_acpi_match[] = { |
| { "QCOM24A5" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); |
| #endif |
| |
| static const struct dev_pm_ops ufs_qcom_pm_ops = { |
| .suspend = ufshcd_pltfrm_suspend, |
| .resume = ufshcd_pltfrm_resume, |
| .runtime_suspend = ufshcd_pltfrm_runtime_suspend, |
| .runtime_resume = ufshcd_pltfrm_runtime_resume, |
| .runtime_idle = ufshcd_pltfrm_runtime_idle, |
| }; |
| |
| static struct platform_driver ufs_qcom_pltform = { |
| .probe = ufs_qcom_probe, |
| .remove = ufs_qcom_remove, |
| .shutdown = ufshcd_pltfrm_shutdown, |
| .driver = { |
| .name = "ufshcd-qcom", |
| .pm = &ufs_qcom_pm_ops, |
| .of_match_table = of_match_ptr(ufs_qcom_of_match), |
| .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), |
| }, |
| }; |
| module_platform_driver(ufs_qcom_pltform); |
| |
| MODULE_LICENSE("GPL v2"); |