| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| // Copyright(c) 2015-17 Intel Corporation. |
| |
| /* |
| * MIPI Discovery And Configuration (DisCo) Specification for SoundWire |
| * specifies properties to be implemented for SoundWire Masters and Slaves. |
| * The DisCo spec doesn't mandate these properties. However, SDW bus cannot |
| * work without knowing these values. |
| * |
| * The helper functions read the Master and Slave properties. Implementers |
| * of Master or Slave drivers can use any of the below three mechanisms: |
| * a) Use these APIs here as .read_prop() callback for Master and Slave |
| * b) Implement own methods and set those as .read_prop(), but invoke |
| * APIs in this file for generic read and override the values with |
| * platform specific data |
| * c) Implement ones own methods which do not use anything provided |
| * here |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/property.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/soundwire/sdw.h> |
| #include "bus.h" |
| |
| /** |
| * sdw_master_read_prop() - Read Master properties |
| * @bus: SDW bus instance |
| */ |
| int sdw_master_read_prop(struct sdw_bus *bus) |
| { |
| struct sdw_master_prop *prop = &bus->prop; |
| struct fwnode_handle *link; |
| char name[32]; |
| int nval, i; |
| |
| device_property_read_u32(bus->dev, |
| "mipi-sdw-sw-interface-revision", |
| &prop->revision); |
| |
| /* Find master handle */ |
| snprintf(name, sizeof(name), |
| "mipi-sdw-link-%d-subproperties", bus->link_id); |
| |
| link = device_get_named_child_node(bus->dev, name); |
| if (!link) { |
| dev_err(bus->dev, "Master node %s not found\n", name); |
| return -EIO; |
| } |
| |
| if (fwnode_property_read_bool(link, |
| "mipi-sdw-clock-stop-mode0-supported")) |
| prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE0); |
| |
| if (fwnode_property_read_bool(link, |
| "mipi-sdw-clock-stop-mode1-supported")) |
| prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE1); |
| |
| fwnode_property_read_u32(link, |
| "mipi-sdw-max-clock-frequency", |
| &prop->max_clk_freq); |
| |
| nval = fwnode_property_read_u32_array(link, |
| "mipi-sdw-clock-frequencies-supported", NULL, 0); |
| if (nval > 0) { |
| prop->num_clk_freq = nval; |
| prop->clk_freq = devm_kcalloc(bus->dev, prop->num_clk_freq, |
| sizeof(*prop->clk_freq), |
| GFP_KERNEL); |
| if (!prop->clk_freq) |
| return -ENOMEM; |
| |
| fwnode_property_read_u32_array(link, |
| "mipi-sdw-clock-frequencies-supported", |
| prop->clk_freq, prop->num_clk_freq); |
| } |
| |
| /* |
| * Check the frequencies supported. If FW doesn't provide max |
| * freq, then populate here by checking values. |
| */ |
| if (!prop->max_clk_freq && prop->clk_freq) { |
| prop->max_clk_freq = prop->clk_freq[0]; |
| for (i = 1; i < prop->num_clk_freq; i++) { |
| if (prop->clk_freq[i] > prop->max_clk_freq) |
| prop->max_clk_freq = prop->clk_freq[i]; |
| } |
| } |
| |
| nval = fwnode_property_read_u32_array(link, |
| "mipi-sdw-supported-clock-gears", NULL, 0); |
| if (nval > 0) { |
| prop->num_clk_gears = nval; |
| prop->clk_gears = devm_kcalloc(bus->dev, prop->num_clk_gears, |
| sizeof(*prop->clk_gears), |
| GFP_KERNEL); |
| if (!prop->clk_gears) |
| return -ENOMEM; |
| |
| fwnode_property_read_u32_array(link, |
| "mipi-sdw-supported-clock-gears", |
| prop->clk_gears, |
| prop->num_clk_gears); |
| } |
| |
| fwnode_property_read_u32(link, "mipi-sdw-default-frame-rate", |
| &prop->default_frame_rate); |
| |
| fwnode_property_read_u32(link, "mipi-sdw-default-frame-row-size", |
| &prop->default_row); |
| |
| fwnode_property_read_u32(link, "mipi-sdw-default-frame-col-size", |
| &prop->default_col); |
| |
| prop->dynamic_frame = fwnode_property_read_bool(link, |
| "mipi-sdw-dynamic-frame-shape"); |
| |
| fwnode_property_read_u32(link, "mipi-sdw-command-error-threshold", |
| &prop->err_threshold); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sdw_master_read_prop); |
| |
| static int sdw_slave_read_dp0(struct sdw_slave *slave, |
| struct fwnode_handle *port, |
| struct sdw_dp0_prop *dp0) |
| { |
| int nval; |
| |
| fwnode_property_read_u32(port, "mipi-sdw-port-max-wordlength", |
| &dp0->max_word); |
| |
| fwnode_property_read_u32(port, "mipi-sdw-port-min-wordlength", |
| &dp0->min_word); |
| |
| nval = fwnode_property_read_u32_array(port, |
| "mipi-sdw-port-wordlength-configs", NULL, 0); |
| if (nval > 0) { |
| |
| dp0->num_words = nval; |
| dp0->words = devm_kcalloc(&slave->dev, |
| dp0->num_words, sizeof(*dp0->words), |
| GFP_KERNEL); |
| if (!dp0->words) |
| return -ENOMEM; |
| |
| fwnode_property_read_u32_array(port, |
| "mipi-sdw-port-wordlength-configs", |
| dp0->words, dp0->num_words); |
| } |
| |
| dp0->BRA_flow_controlled = fwnode_property_read_bool(port, |
| "mipi-sdw-bra-flow-controlled"); |
| |
| dp0->simple_ch_prep_sm = fwnode_property_read_bool(port, |
| "mipi-sdw-simplified-channel-prepare-sm"); |
| |
| dp0->imp_def_interrupts = fwnode_property_read_bool(port, |
| "mipi-sdw-imp-def-dp0-interrupts-supported"); |
| |
| return 0; |
| } |
| |
| static int sdw_slave_read_dpn(struct sdw_slave *slave, |
| struct sdw_dpn_prop *dpn, int count, int ports, |
| char *type) |
| { |
| struct fwnode_handle *node; |
| u32 bit, i = 0; |
| int nval; |
| unsigned long addr; |
| char name[40]; |
| |
| addr = ports; |
| /* valid ports are 1 to 14 so apply mask */ |
| addr &= GENMASK(14, 1); |
| |
| for_each_set_bit(bit, &addr, 32) { |
| snprintf(name, sizeof(name), |
| "mipi-sdw-dp-%d-%s-subproperties", bit, type); |
| |
| dpn[i].num = bit; |
| |
| node = device_get_named_child_node(&slave->dev, name); |
| if (!node) { |
| dev_err(&slave->dev, "%s dpN not found\n", name); |
| return -EIO; |
| } |
| |
| fwnode_property_read_u32(node, "mipi-sdw-port-max-wordlength", |
| &dpn[i].max_word); |
| fwnode_property_read_u32(node, "mipi-sdw-port-min-wordlength", |
| &dpn[i].min_word); |
| |
| nval = fwnode_property_read_u32_array(node, |
| "mipi-sdw-port-wordlength-configs", NULL, 0); |
| if (nval > 0) { |
| dpn[i].num_words = nval; |
| dpn[i].words = devm_kcalloc(&slave->dev, |
| dpn[i].num_words, |
| sizeof(*dpn[i].words), |
| GFP_KERNEL); |
| if (!dpn[i].words) |
| return -ENOMEM; |
| |
| fwnode_property_read_u32_array(node, |
| "mipi-sdw-port-wordlength-configs", |
| dpn[i].words, dpn[i].num_words); |
| } |
| |
| fwnode_property_read_u32(node, "mipi-sdw-data-port-type", |
| &dpn[i].type); |
| |
| fwnode_property_read_u32(node, |
| "mipi-sdw-max-grouping-supported", |
| &dpn[i].max_grouping); |
| |
| dpn[i].simple_ch_prep_sm = fwnode_property_read_bool(node, |
| "mipi-sdw-simplified-channelprepare-sm"); |
| |
| fwnode_property_read_u32(node, |
| "mipi-sdw-port-channelprepare-timeout", |
| &dpn[i].ch_prep_timeout); |
| |
| fwnode_property_read_u32(node, |
| "mipi-sdw-imp-def-dpn-interrupts-supported", |
| &dpn[i].imp_def_interrupts); |
| |
| fwnode_property_read_u32(node, "mipi-sdw-min-channel-number", |
| &dpn[i].min_ch); |
| |
| fwnode_property_read_u32(node, "mipi-sdw-max-channel-number", |
| &dpn[i].max_ch); |
| |
| nval = fwnode_property_read_u32_array(node, |
| "mipi-sdw-channel-number-list", NULL, 0); |
| if (nval > 0) { |
| dpn[i].num_ch = nval; |
| dpn[i].ch = devm_kcalloc(&slave->dev, dpn[i].num_ch, |
| sizeof(*dpn[i].ch), |
| GFP_KERNEL); |
| if (!dpn[i].ch) |
| return -ENOMEM; |
| |
| fwnode_property_read_u32_array(node, |
| "mipi-sdw-channel-number-list", |
| dpn[i].ch, dpn[i].num_ch); |
| } |
| |
| nval = fwnode_property_read_u32_array(node, |
| "mipi-sdw-channel-combination-list", NULL, 0); |
| if (nval > 0) { |
| dpn[i].num_ch_combinations = nval; |
| dpn[i].ch_combinations = devm_kcalloc(&slave->dev, |
| dpn[i].num_ch_combinations, |
| sizeof(*dpn[i].ch_combinations), |
| GFP_KERNEL); |
| if (!dpn[i].ch_combinations) |
| return -ENOMEM; |
| |
| fwnode_property_read_u32_array(node, |
| "mipi-sdw-channel-combination-list", |
| dpn[i].ch_combinations, |
| dpn[i].num_ch_combinations); |
| } |
| |
| fwnode_property_read_u32(node, |
| "mipi-sdw-modes-supported", &dpn[i].modes); |
| |
| fwnode_property_read_u32(node, "mipi-sdw-max-async-buffer", |
| &dpn[i].max_async_buffer); |
| |
| dpn[i].block_pack_mode = fwnode_property_read_bool(node, |
| "mipi-sdw-block-packing-mode"); |
| |
| fwnode_property_read_u32(node, "mipi-sdw-port-encoding-type", |
| &dpn[i].port_encoding); |
| |
| /* TODO: Read audio mode */ |
| |
| i++; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * sdw_slave_read_prop() - Read Slave properties |
| * @slave: SDW Slave |
| */ |
| int sdw_slave_read_prop(struct sdw_slave *slave) |
| { |
| struct sdw_slave_prop *prop = &slave->prop; |
| struct device *dev = &slave->dev; |
| struct fwnode_handle *port; |
| int num_of_ports, nval, i, dp0 = 0; |
| |
| device_property_read_u32(dev, "mipi-sdw-sw-interface-revision", |
| &prop->mipi_revision); |
| |
| prop->wake_capable = device_property_read_bool(dev, |
| "mipi-sdw-wake-up-unavailable"); |
| prop->wake_capable = !prop->wake_capable; |
| |
| prop->test_mode_capable = device_property_read_bool(dev, |
| "mipi-sdw-test-mode-supported"); |
| |
| prop->clk_stop_mode1 = false; |
| if (device_property_read_bool(dev, |
| "mipi-sdw-clock-stop-mode1-supported")) |
| prop->clk_stop_mode1 = true; |
| |
| prop->simple_clk_stop_capable = device_property_read_bool(dev, |
| "mipi-sdw-simplified-clockstopprepare-sm-supported"); |
| |
| device_property_read_u32(dev, "mipi-sdw-clockstopprepare-timeout", |
| &prop->clk_stop_timeout); |
| |
| device_property_read_u32(dev, "mipi-sdw-slave-channelprepare-timeout", |
| &prop->ch_prep_timeout); |
| |
| device_property_read_u32(dev, |
| "mipi-sdw-clockstopprepare-hard-reset-behavior", |
| &prop->reset_behave); |
| |
| prop->high_PHY_capable = device_property_read_bool(dev, |
| "mipi-sdw-highPHY-capable"); |
| |
| prop->paging_support = device_property_read_bool(dev, |
| "mipi-sdw-paging-support"); |
| |
| prop->bank_delay_support = device_property_read_bool(dev, |
| "mipi-sdw-bank-delay-support"); |
| |
| device_property_read_u32(dev, |
| "mipi-sdw-port15-read-behavior", &prop->p15_behave); |
| |
| device_property_read_u32(dev, "mipi-sdw-master-count", |
| &prop->master_count); |
| |
| device_property_read_u32(dev, "mipi-sdw-source-port-list", |
| &prop->source_ports); |
| |
| device_property_read_u32(dev, "mipi-sdw-sink-port-list", |
| &prop->sink_ports); |
| |
| /* Read dp0 properties */ |
| port = device_get_named_child_node(dev, "mipi-sdw-dp-0-subproperties"); |
| if (!port) { |
| dev_dbg(dev, "DP0 node not found!!\n"); |
| } else { |
| prop->dp0_prop = devm_kzalloc(&slave->dev, |
| sizeof(*prop->dp0_prop), |
| GFP_KERNEL); |
| if (!prop->dp0_prop) |
| return -ENOMEM; |
| |
| sdw_slave_read_dp0(slave, port, prop->dp0_prop); |
| dp0 = 1; |
| } |
| |
| /* |
| * Based on each DPn port, get source and sink dpn properties. |
| * Also, some ports can operate as both source or sink. |
| */ |
| |
| /* Allocate memory for set bits in port lists */ |
| nval = hweight32(prop->source_ports); |
| prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->src_dpn_prop), |
| GFP_KERNEL); |
| if (!prop->src_dpn_prop) |
| return -ENOMEM; |
| |
| /* Read dpn properties for source port(s) */ |
| sdw_slave_read_dpn(slave, prop->src_dpn_prop, nval, |
| prop->source_ports, "source"); |
| |
| nval = hweight32(prop->sink_ports); |
| prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->sink_dpn_prop), |
| GFP_KERNEL); |
| if (!prop->sink_dpn_prop) |
| return -ENOMEM; |
| |
| /* Read dpn properties for sink port(s) */ |
| sdw_slave_read_dpn(slave, prop->sink_dpn_prop, nval, |
| prop->sink_ports, "sink"); |
| |
| /* some ports are bidirectional so check total ports by ORing */ |
| nval = prop->source_ports | prop->sink_ports; |
| num_of_ports = hweight32(nval) + dp0; /* add DP0 */ |
| |
| /* Allocate port_ready based on num_of_ports */ |
| slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports, |
| sizeof(*slave->port_ready), |
| GFP_KERNEL); |
| if (!slave->port_ready) |
| return -ENOMEM; |
| |
| /* Initialize completion */ |
| for (i = 0; i < num_of_ports; i++) |
| init_completion(&slave->port_ready[i]); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sdw_slave_read_prop); |