| /* |
| * linux/sound/oss/dmasound/dmasound_atari.c |
| * |
| * Atari TT and Falcon DMA Sound Driver |
| * |
| * See linux/sound/oss/dmasound/dmasound_core.c for copyright and credits |
| * prior to 28/01/2001 |
| * |
| * 28/01/2001 [0.1] Iain Sandoe |
| * - added versioning |
| * - put in and populated the hardware_afmts field. |
| * [0.2] - put in SNDCTL_DSP_GETCAPS value. |
| * 01/02/2001 [0.3] - put in default hard/soft settings. |
| */ |
| |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/soundcard.h> |
| #include <linux/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/atariints.h> |
| #include <asm/atari_stram.h> |
| |
| #include "dmasound.h" |
| |
| #define DMASOUND_ATARI_REVISION 0 |
| #define DMASOUND_ATARI_EDITION 3 |
| |
| extern void atari_microwire_cmd(int cmd); |
| |
| static int is_falcon; |
| static int write_sq_ignore_int; /* ++TeSche: used for Falcon */ |
| |
| static int expand_bal; /* Balance factor for expanding (not volume!) */ |
| static int expand_data; /* Data for expanding */ |
| |
| |
| /*** Translations ************************************************************/ |
| |
| |
| /* ++TeSche: radically changed for new expanding purposes... |
| * |
| * These two routines now deal with copying/expanding/translating the samples |
| * from user space into our buffer at the right frequency. They take care about |
| * how much data there's actually to read, how much buffer space there is and |
| * to convert samples into the right frequency/encoding. They will only work on |
| * complete samples so it may happen they leave some bytes in the input stream |
| * if the user didn't write a multiple of the current sample size. They both |
| * return the number of bytes they've used from both streams so you may detect |
| * such a situation. Luckily all programs should be able to cope with that. |
| * |
| * I think I've optimized anything as far as one can do in plain C, all |
| * variables should fit in registers and the loops are really short. There's |
| * one loop for every possible situation. Writing a more generalized and thus |
| * parameterized loop would only produce slower code. Feel free to optimize |
| * this in assembler if you like. :) |
| * |
| * I think these routines belong here because they're not yet really hardware |
| * independent, especially the fact that the Falcon can play 16bit samples |
| * only in stereo is hardcoded in both of them! |
| * |
| * ++geert: split in even more functions (one per format) |
| */ |
| |
| static ssize_t ata_ct_law(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ct_s8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ct_u8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ct_s16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ct_u16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ct_s16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ct_u16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_law(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_s8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_u8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_s16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_u16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_s16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| static ssize_t ata_ctx_u16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft); |
| |
| |
| /*** Low level stuff *********************************************************/ |
| |
| |
| static void *AtaAlloc(unsigned int size, gfp_t flags); |
| static void AtaFree(void *, unsigned int size); |
| static int AtaIrqInit(void); |
| #ifdef MODULE |
| static void AtaIrqCleanUp(void); |
| #endif /* MODULE */ |
| static int AtaSetBass(int bass); |
| static int AtaSetTreble(int treble); |
| static void TTSilence(void); |
| static void TTInit(void); |
| static int TTSetFormat(int format); |
| static int TTSetVolume(int volume); |
| static int TTSetGain(int gain); |
| static void FalconSilence(void); |
| static void FalconInit(void); |
| static int FalconSetFormat(int format); |
| static int FalconSetVolume(int volume); |
| static void AtaPlayNextFrame(int index); |
| static void AtaPlay(void); |
| static irqreturn_t AtaInterrupt(int irq, void *dummy); |
| |
| /*** Mid level stuff *********************************************************/ |
| |
| static void TTMixerInit(void); |
| static void FalconMixerInit(void); |
| static int AtaMixerIoctl(u_int cmd, u_long arg); |
| static int TTMixerIoctl(u_int cmd, u_long arg); |
| static int FalconMixerIoctl(u_int cmd, u_long arg); |
| static int AtaWriteSqSetup(void); |
| static int AtaSqOpen(fmode_t mode); |
| static int TTStateInfo(char *buffer, size_t space); |
| static int FalconStateInfo(char *buffer, size_t space); |
| |
| |
| /*** Translations ************************************************************/ |
| |
| |
| static ssize_t ata_ct_law(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| char *table = dmasound.soft.format == AFMT_MU_LAW ? dmasound_ulaw2dma8 |
| : dmasound_alaw2dma8; |
| ssize_t count, used; |
| u_char *p = &frame[*frameUsed]; |
| |
| count = min_t(unsigned long, userCount, frameLeft); |
| if (dmasound.soft.stereo) |
| count &= ~1; |
| used = count; |
| while (count > 0) { |
| u_char data; |
| if (get_user(data, userPtr++)) |
| return -EFAULT; |
| *p++ = table[data]; |
| count--; |
| } |
| *frameUsed += used; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ct_s8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| ssize_t count, used; |
| void *p = &frame[*frameUsed]; |
| |
| count = min_t(unsigned long, userCount, frameLeft); |
| if (dmasound.soft.stereo) |
| count &= ~1; |
| used = count; |
| if (copy_from_user(p, userPtr, count)) |
| return -EFAULT; |
| *frameUsed += used; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ct_u8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| ssize_t count, used; |
| |
| if (!dmasound.soft.stereo) { |
| u_char *p = &frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft); |
| used = count; |
| while (count > 0) { |
| u_char data; |
| if (get_user(data, userPtr++)) |
| return -EFAULT; |
| *p++ = data ^ 0x80; |
| count--; |
| } |
| } else { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>1; |
| used = count*2; |
| while (count > 0) { |
| u_short data; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| *p++ = data ^ 0x8080; |
| count--; |
| } |
| } |
| *frameUsed += used; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ct_s16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| ssize_t count, used; |
| |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>1; |
| used = count*2; |
| while (count > 0) { |
| u_short data; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| *p++ = data; |
| *p++ = data; |
| count--; |
| } |
| *frameUsed += used*2; |
| } else { |
| void *p = (u_short *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft) & ~3; |
| used = count; |
| if (copy_from_user(p, userPtr, count)) |
| return -EFAULT; |
| *frameUsed += used; |
| } |
| return used; |
| } |
| |
| |
| static ssize_t ata_ct_u16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| ssize_t count, used; |
| |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>1; |
| used = count*2; |
| while (count > 0) { |
| u_short data; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data ^= 0x8000; |
| *p++ = data; |
| *p++ = data; |
| count--; |
| } |
| *frameUsed += used*2; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>2; |
| used = count*4; |
| while (count > 0) { |
| u_int data; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| *p++ = data ^ 0x80008000; |
| count--; |
| } |
| *frameUsed += used; |
| } |
| return used; |
| } |
| |
| |
| static ssize_t ata_ct_s16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| ssize_t count, used; |
| |
| count = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>1; |
| used = count*2; |
| while (count > 0) { |
| u_short data; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data = le2be16(data); |
| *p++ = data; |
| *p++ = data; |
| count--; |
| } |
| *frameUsed += used*2; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>2; |
| used = count*4; |
| while (count > 0) { |
| u_long data; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| data = le2be16dbl(data); |
| *p++ = data; |
| count--; |
| } |
| *frameUsed += used; |
| } |
| return used; |
| } |
| |
| |
| static ssize_t ata_ct_u16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| ssize_t count, used; |
| |
| count = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>1; |
| used = count*2; |
| while (count > 0) { |
| u_short data; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data = le2be16(data) ^ 0x8000; |
| *p++ = data; |
| *p++ = data; |
| } |
| *frameUsed += used*2; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| count = min_t(unsigned long, userCount, frameLeft)>>2; |
| used = count; |
| while (count > 0) { |
| u_long data; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| data = le2be16dbl(data) ^ 0x80008000; |
| *p++ = data; |
| count--; |
| } |
| *frameUsed += used; |
| } |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_law(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| char *table = dmasound.soft.format == AFMT_MU_LAW ? dmasound_ulaw2dma8 |
| : dmasound_alaw2dma8; |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_char *p = &frame[*frameUsed]; |
| u_char data = expand_data; |
| while (frameLeft) { |
| u_char c; |
| if (bal < 0) { |
| if (!userCount) |
| break; |
| if (get_user(c, userPtr++)) |
| return -EFAULT; |
| data = table[c]; |
| userCount--; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft--; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 2) { |
| u_char c; |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(c, userPtr++)) |
| return -EFAULT; |
| data = table[c] << 8; |
| if (get_user(c, userPtr++)) |
| return -EFAULT; |
| data |= table[c]; |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 2; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_s8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_char *p = &frame[*frameUsed]; |
| u_char data = expand_data; |
| while (frameLeft) { |
| if (bal < 0) { |
| if (!userCount) |
| break; |
| if (get_user(data, userPtr++)) |
| return -EFAULT; |
| userCount--; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft--; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 2) { |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 2; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_u8(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_char *p = &frame[*frameUsed]; |
| u_char data = expand_data; |
| while (frameLeft) { |
| if (bal < 0) { |
| if (!userCount) |
| break; |
| if (get_user(data, userPtr++)) |
| return -EFAULT; |
| data ^= 0x80; |
| userCount--; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft--; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 2) { |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data ^= 0x8080; |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 2; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_s16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| u_long data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 4) |
| break; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| userCount -= 4; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_u16be(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data ^= 0x8000; |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| u_long data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 4) |
| break; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| data ^= 0x80008000; |
| userCount -= 4; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_s16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data = le2be16(data); |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| u_long data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 4) |
| break; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| data = le2be16dbl(data); |
| userCount -= 4; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static ssize_t ata_ctx_u16le(const u_char __user *userPtr, size_t userCount, |
| u_char frame[], ssize_t *frameUsed, |
| ssize_t frameLeft) |
| { |
| /* this should help gcc to stuff everything into registers */ |
| long bal = expand_bal; |
| long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| ssize_t used, usedf; |
| |
| used = userCount; |
| usedf = frameLeft; |
| if (!dmasound.soft.stereo) { |
| u_short *p = (u_short *)&frame[*frameUsed]; |
| u_short data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 2) |
| break; |
| if (get_user(data, (u_short __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 2; |
| data = le2be16(data) ^ 0x8000; |
| userCount -= 2; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } else { |
| u_long *p = (u_long *)&frame[*frameUsed]; |
| u_long data = expand_data; |
| while (frameLeft >= 4) { |
| if (bal < 0) { |
| if (userCount < 4) |
| break; |
| if (get_user(data, (u_int __user *)userPtr)) |
| return -EFAULT; |
| userPtr += 4; |
| data = le2be16dbl(data) ^ 0x80008000; |
| userCount -= 4; |
| bal += hSpeed; |
| } |
| *p++ = data; |
| frameLeft -= 4; |
| bal -= sSpeed; |
| } |
| expand_data = data; |
| } |
| expand_bal = bal; |
| used -= userCount; |
| *frameUsed += usedf-frameLeft; |
| return used; |
| } |
| |
| |
| static TRANS transTTNormal = { |
| .ct_ulaw = ata_ct_law, |
| .ct_alaw = ata_ct_law, |
| .ct_s8 = ata_ct_s8, |
| .ct_u8 = ata_ct_u8, |
| }; |
| |
| static TRANS transTTExpanding = { |
| .ct_ulaw = ata_ctx_law, |
| .ct_alaw = ata_ctx_law, |
| .ct_s8 = ata_ctx_s8, |
| .ct_u8 = ata_ctx_u8, |
| }; |
| |
| static TRANS transFalconNormal = { |
| .ct_ulaw = ata_ct_law, |
| .ct_alaw = ata_ct_law, |
| .ct_s8 = ata_ct_s8, |
| .ct_u8 = ata_ct_u8, |
| .ct_s16be = ata_ct_s16be, |
| .ct_u16be = ata_ct_u16be, |
| .ct_s16le = ata_ct_s16le, |
| .ct_u16le = ata_ct_u16le |
| }; |
| |
| static TRANS transFalconExpanding = { |
| .ct_ulaw = ata_ctx_law, |
| .ct_alaw = ata_ctx_law, |
| .ct_s8 = ata_ctx_s8, |
| .ct_u8 = ata_ctx_u8, |
| .ct_s16be = ata_ctx_s16be, |
| .ct_u16be = ata_ctx_u16be, |
| .ct_s16le = ata_ctx_s16le, |
| .ct_u16le = ata_ctx_u16le, |
| }; |
| |
| |
| /*** Low level stuff *********************************************************/ |
| |
| |
| |
| /* |
| * Atari (TT/Falcon) |
| */ |
| |
| static void *AtaAlloc(unsigned int size, gfp_t flags) |
| { |
| return atari_stram_alloc(size, "dmasound"); |
| } |
| |
| static void AtaFree(void *obj, unsigned int size) |
| { |
| atari_stram_free( obj ); |
| } |
| |
| static int __init AtaIrqInit(void) |
| { |
| /* Set up timer A. Timer A |
| will receive a signal upon end of playing from the sound |
| hardware. Furthermore Timer A is able to count events |
| and will cause an interrupt after a programmed number |
| of events. So all we need to keep the music playing is |
| to provide the sound hardware with new data upon |
| an interrupt from timer A. */ |
| st_mfp.tim_ct_a = 0; /* ++roman: Stop timer before programming! */ |
| st_mfp.tim_dt_a = 1; /* Cause interrupt after first event. */ |
| st_mfp.tim_ct_a = 8; /* Turn on event counting. */ |
| /* Register interrupt handler. */ |
| if (request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound", |
| AtaInterrupt)) |
| return 0; |
| st_mfp.int_en_a |= 0x20; /* Turn interrupt on. */ |
| st_mfp.int_mk_a |= 0x20; |
| return 1; |
| } |
| |
| #ifdef MODULE |
| static void AtaIrqCleanUp(void) |
| { |
| st_mfp.tim_ct_a = 0; /* stop timer */ |
| st_mfp.int_en_a &= ~0x20; /* turn interrupt off */ |
| free_irq(IRQ_MFP_TIMA, AtaInterrupt); |
| } |
| #endif /* MODULE */ |
| |
| |
| #define TONE_VOXWARE_TO_DB(v) \ |
| (((v) < 0) ? -12 : ((v) > 100) ? 12 : ((v) - 50) * 6 / 25) |
| #define TONE_DB_TO_VOXWARE(v) (((v) * 25 + ((v) > 0 ? 5 : -5)) / 6 + 50) |
| |
| |
| static int AtaSetBass(int bass) |
| { |
| dmasound.bass = TONE_VOXWARE_TO_DB(bass); |
| atari_microwire_cmd(MW_LM1992_BASS(dmasound.bass)); |
| return TONE_DB_TO_VOXWARE(dmasound.bass); |
| } |
| |
| |
| static int AtaSetTreble(int treble) |
| { |
| dmasound.treble = TONE_VOXWARE_TO_DB(treble); |
| atari_microwire_cmd(MW_LM1992_TREBLE(dmasound.treble)); |
| return TONE_DB_TO_VOXWARE(dmasound.treble); |
| } |
| |
| |
| |
| /* |
| * TT |
| */ |
| |
| |
| static void TTSilence(void) |
| { |
| tt_dmasnd.ctrl = DMASND_CTRL_OFF; |
| atari_microwire_cmd(MW_LM1992_PSG_HIGH); /* mix in PSG signal 1:1 */ |
| } |
| |
| |
| static void TTInit(void) |
| { |
| int mode, i, idx; |
| const int freq[4] = {50066, 25033, 12517, 6258}; |
| |
| /* search a frequency that fits into the allowed error range */ |
| |
| idx = -1; |
| for (i = 0; i < ARRAY_SIZE(freq); i++) |
| /* this isn't as much useful for a TT than for a Falcon, but |
| * then it doesn't hurt very much to implement it for a TT too. |
| */ |
| if ((100 * abs(dmasound.soft.speed - freq[i]) / freq[i]) < catchRadius) |
| idx = i; |
| if (idx > -1) { |
| dmasound.soft.speed = freq[idx]; |
| dmasound.trans_write = &transTTNormal; |
| } else |
| dmasound.trans_write = &transTTExpanding; |
| |
| TTSilence(); |
| dmasound.hard = dmasound.soft; |
| |
| if (dmasound.hard.speed > 50066) { |
| /* we would need to squeeze the sound, but we won't do that */ |
| dmasound.hard.speed = 50066; |
| mode = DMASND_MODE_50KHZ; |
| dmasound.trans_write = &transTTNormal; |
| } else if (dmasound.hard.speed > 25033) { |
| dmasound.hard.speed = 50066; |
| mode = DMASND_MODE_50KHZ; |
| } else if (dmasound.hard.speed > 12517) { |
| dmasound.hard.speed = 25033; |
| mode = DMASND_MODE_25KHZ; |
| } else if (dmasound.hard.speed > 6258) { |
| dmasound.hard.speed = 12517; |
| mode = DMASND_MODE_12KHZ; |
| } else { |
| dmasound.hard.speed = 6258; |
| mode = DMASND_MODE_6KHZ; |
| } |
| |
| tt_dmasnd.mode = (dmasound.hard.stereo ? |
| DMASND_MODE_STEREO : DMASND_MODE_MONO) | |
| DMASND_MODE_8BIT | mode; |
| |
| expand_bal = -dmasound.soft.speed; |
| } |
| |
| |
| static int TTSetFormat(int format) |
| { |
| /* TT sound DMA supports only 8bit modes */ |
| |
| switch (format) { |
| case AFMT_QUERY: |
| return dmasound.soft.format; |
| case AFMT_MU_LAW: |
| case AFMT_A_LAW: |
| case AFMT_S8: |
| case AFMT_U8: |
| break; |
| default: |
| format = AFMT_S8; |
| } |
| |
| dmasound.soft.format = format; |
| dmasound.soft.size = 8; |
| if (dmasound.minDev == SND_DEV_DSP) { |
| dmasound.dsp.format = format; |
| dmasound.dsp.size = 8; |
| } |
| TTInit(); |
| |
| return format; |
| } |
| |
| |
| #define VOLUME_VOXWARE_TO_DB(v) \ |
| (((v) < 0) ? -40 : ((v) > 100) ? 0 : ((v) * 2) / 5 - 40) |
| #define VOLUME_DB_TO_VOXWARE(v) ((((v) + 40) * 5 + 1) / 2) |
| |
| |
| static int TTSetVolume(int volume) |
| { |
| dmasound.volume_left = VOLUME_VOXWARE_TO_DB(volume & 0xff); |
| atari_microwire_cmd(MW_LM1992_BALLEFT(dmasound.volume_left)); |
| dmasound.volume_right = VOLUME_VOXWARE_TO_DB((volume & 0xff00) >> 8); |
| atari_microwire_cmd(MW_LM1992_BALRIGHT(dmasound.volume_right)); |
| return VOLUME_DB_TO_VOXWARE(dmasound.volume_left) | |
| (VOLUME_DB_TO_VOXWARE(dmasound.volume_right) << 8); |
| } |
| |
| |
| #define GAIN_VOXWARE_TO_DB(v) \ |
| (((v) < 0) ? -80 : ((v) > 100) ? 0 : ((v) * 4) / 5 - 80) |
| #define GAIN_DB_TO_VOXWARE(v) ((((v) + 80) * 5 + 1) / 4) |
| |
| static int TTSetGain(int gain) |
| { |
| dmasound.gain = GAIN_VOXWARE_TO_DB(gain); |
| atari_microwire_cmd(MW_LM1992_VOLUME(dmasound.gain)); |
| return GAIN_DB_TO_VOXWARE(dmasound.gain); |
| } |
| |
| |
| |
| /* |
| * Falcon |
| */ |
| |
| |
| static void FalconSilence(void) |
| { |
| /* stop playback, set sample rate 50kHz for PSG sound */ |
| tt_dmasnd.ctrl = DMASND_CTRL_OFF; |
| tt_dmasnd.mode = DMASND_MODE_50KHZ | DMASND_MODE_STEREO | DMASND_MODE_8BIT; |
| tt_dmasnd.int_div = 0; /* STE compatible divider */ |
| tt_dmasnd.int_ctrl = 0x0; |
| tt_dmasnd.cbar_src = 0x0000; /* no matrix inputs */ |
| tt_dmasnd.cbar_dst = 0x0000; /* no matrix outputs */ |
| tt_dmasnd.dac_src = 1; /* connect ADC to DAC, disconnect matrix */ |
| tt_dmasnd.adc_src = 3; /* ADC Input = PSG */ |
| } |
| |
| |
| static void FalconInit(void) |
| { |
| int divider, i, idx; |
| const int freq[8] = {49170, 32780, 24585, 19668, 16390, 12292, 9834, 8195}; |
| |
| /* search a frequency that fits into the allowed error range */ |
| |
| idx = -1; |
| for (i = 0; i < ARRAY_SIZE(freq); i++) |
| /* if we will tolerate 3% error 8000Hz->8195Hz (2.38%) would |
| * be playable without expanding, but that now a kernel runtime |
| * option |
| */ |
| if ((100 * abs(dmasound.soft.speed - freq[i]) / freq[i]) < catchRadius) |
| idx = i; |
| if (idx > -1) { |
| dmasound.soft.speed = freq[idx]; |
| dmasound.trans_write = &transFalconNormal; |
| } else |
| dmasound.trans_write = &transFalconExpanding; |
| |
| FalconSilence(); |
| dmasound.hard = dmasound.soft; |
| |
| if (dmasound.hard.size == 16) { |
| /* the Falcon can play 16bit samples only in stereo */ |
| dmasound.hard.stereo = 1; |
| } |
| |
| if (dmasound.hard.speed > 49170) { |
| /* we would need to squeeze the sound, but we won't do that */ |
| dmasound.hard.speed = 49170; |
| divider = 1; |
| dmasound.trans_write = &transFalconNormal; |
| } else if (dmasound.hard.speed > 32780) { |
| dmasound.hard.speed = 49170; |
| divider = 1; |
| } else if (dmasound.hard.speed > 24585) { |
| dmasound.hard.speed = 32780; |
| divider = 2; |
| } else if (dmasound.hard.speed > 19668) { |
| dmasound.hard.speed = 24585; |
| divider = 3; |
| } else if (dmasound.hard.speed > 16390) { |
| dmasound.hard.speed = 19668; |
| divider = 4; |
| } else if (dmasound.hard.speed > 12292) { |
| dmasound.hard.speed = 16390; |
| divider = 5; |
| } else if (dmasound.hard.speed > 9834) { |
| dmasound.hard.speed = 12292; |
| divider = 7; |
| } else if (dmasound.hard.speed > 8195) { |
| dmasound.hard.speed = 9834; |
| divider = 9; |
| } else { |
| dmasound.hard.speed = 8195; |
| divider = 11; |
| } |
| tt_dmasnd.int_div = divider; |
| |
| /* Setup Falcon sound DMA for playback */ |
| tt_dmasnd.int_ctrl = 0x4; /* Timer A int at play end */ |
| tt_dmasnd.track_select = 0x0; /* play 1 track, track 1 */ |
| tt_dmasnd.cbar_src = 0x0001; /* DMA(25MHz) --> DAC */ |
| tt_dmasnd.cbar_dst = 0x0000; |
| tt_dmasnd.rec_track_select = 0; |
| tt_dmasnd.dac_src = 2; /* connect matrix to DAC */ |
| tt_dmasnd.adc_src = 0; /* ADC Input = Mic */ |
| |
| tt_dmasnd.mode = (dmasound.hard.stereo ? |
| DMASND_MODE_STEREO : DMASND_MODE_MONO) | |
| ((dmasound.hard.size == 8) ? |
| DMASND_MODE_8BIT : DMASND_MODE_16BIT) | |
| DMASND_MODE_6KHZ; |
| |
| expand_bal = -dmasound.soft.speed; |
| } |
| |
| |
| static int FalconSetFormat(int format) |
| { |
| int size; |
| /* Falcon sound DMA supports 8bit and 16bit modes */ |
| |
| switch (format) { |
| case AFMT_QUERY: |
| return dmasound.soft.format; |
| case AFMT_MU_LAW: |
| case AFMT_A_LAW: |
| case AFMT_U8: |
| case AFMT_S8: |
| size = 8; |
| break; |
| case AFMT_S16_BE: |
| case AFMT_U16_BE: |
| case AFMT_S16_LE: |
| case AFMT_U16_LE: |
| size = 16; |
| break; |
| default: /* :-) */ |
| size = 8; |
| format = AFMT_S8; |
| } |
| |
| dmasound.soft.format = format; |
| dmasound.soft.size = size; |
| if (dmasound.minDev == SND_DEV_DSP) { |
| dmasound.dsp.format = format; |
| dmasound.dsp.size = dmasound.soft.size; |
| } |
| |
| FalconInit(); |
| |
| return format; |
| } |
| |
| |
| /* This is for the Falcon output *attenuation* in 1.5dB steps, |
| * i.e. output level from 0 to -22.5dB in -1.5dB steps. |
| */ |
| #define VOLUME_VOXWARE_TO_ATT(v) \ |
| ((v) < 0 ? 15 : (v) > 100 ? 0 : 15 - (v) * 3 / 20) |
| #define VOLUME_ATT_TO_VOXWARE(v) (100 - (v) * 20 / 3) |
| |
| |
| static int FalconSetVolume(int volume) |
| { |
| dmasound.volume_left = VOLUME_VOXWARE_TO_ATT(volume & 0xff); |
| dmasound.volume_right = VOLUME_VOXWARE_TO_ATT((volume & 0xff00) >> 8); |
| tt_dmasnd.output_atten = dmasound.volume_left << 8 | dmasound.volume_right << 4; |
| return VOLUME_ATT_TO_VOXWARE(dmasound.volume_left) | |
| VOLUME_ATT_TO_VOXWARE(dmasound.volume_right) << 8; |
| } |
| |
| |
| static void AtaPlayNextFrame(int index) |
| { |
| char *start, *end; |
| |
| /* used by AtaPlay() if all doubts whether there really is something |
| * to be played are already wiped out. |
| */ |
| start = write_sq.buffers[write_sq.front]; |
| end = start+((write_sq.count == index) ? write_sq.rear_size |
| : write_sq.block_size); |
| /* end might not be a legal virtual address. */ |
| DMASNDSetEnd(virt_to_phys(end - 1) + 1); |
| DMASNDSetBase(virt_to_phys(start)); |
| /* Since only an even number of samples per frame can |
| be played, we might lose one byte here. (TO DO) */ |
| write_sq.front = (write_sq.front+1) % write_sq.max_count; |
| write_sq.active++; |
| tt_dmasnd.ctrl = DMASND_CTRL_ON | DMASND_CTRL_REPEAT; |
| } |
| |
| |
| static void AtaPlay(void) |
| { |
| /* ++TeSche: Note that write_sq.active is no longer just a flag but |
| * holds the number of frames the DMA is currently programmed for |
| * instead, may be 0, 1 (currently being played) or 2 (pre-programmed). |
| * |
| * Changes done to write_sq.count and write_sq.active are a bit more |
| * subtle again so now I must admit I also prefer disabling the irq |
| * here rather than considering all possible situations. But the point |
| * is that disabling the irq doesn't have any bad influence on this |
| * version of the driver as we benefit from having pre-programmed the |
| * DMA wherever possible: There's no need to reload the DMA at the |
| * exact time of an interrupt but only at some time while the |
| * pre-programmed frame is playing! |
| */ |
| atari_disable_irq(IRQ_MFP_TIMA); |
| |
| if (write_sq.active == 2 || /* DMA is 'full' */ |
| write_sq.count <= 0) { /* nothing to do */ |
| atari_enable_irq(IRQ_MFP_TIMA); |
| return; |
| } |
| |
| if (write_sq.active == 0) { |
| /* looks like there's nothing 'in' the DMA yet, so try |
| * to put two frames into it (at least one is available). |
| */ |
| if (write_sq.count == 1 && |
| write_sq.rear_size < write_sq.block_size && |
| !write_sq.syncing) { |
| /* hmmm, the only existing frame is not |
| * yet filled and we're not syncing? |
| */ |
| atari_enable_irq(IRQ_MFP_TIMA); |
| return; |
| } |
| AtaPlayNextFrame(1); |
| if (write_sq.count == 1) { |
| /* no more frames */ |
| atari_enable_irq(IRQ_MFP_TIMA); |
| return; |
| } |
| if (write_sq.count == 2 && |
| write_sq.rear_size < write_sq.block_size && |
| !write_sq.syncing) { |
| /* hmmm, there were two frames, but the second |
| * one is not yet filled and we're not syncing? |
| */ |
| atari_enable_irq(IRQ_MFP_TIMA); |
| return; |
| } |
| AtaPlayNextFrame(2); |
| } else { |
| /* there's already a frame being played so we may only stuff |
| * one new into the DMA, but even if this may be the last |
| * frame existing the previous one is still on write_sq.count. |
| */ |
| if (write_sq.count == 2 && |
| write_sq.rear_size < write_sq.block_size && |
| !write_sq.syncing) { |
| /* hmmm, the only existing frame is not |
| * yet filled and we're not syncing? |
| */ |
| atari_enable_irq(IRQ_MFP_TIMA); |
| return; |
| } |
| AtaPlayNextFrame(2); |
| } |
| atari_enable_irq(IRQ_MFP_TIMA); |
| } |
| |
| |
| static irqreturn_t AtaInterrupt(int irq, void *dummy) |
| { |
| #if 0 |
| /* ++TeSche: if you should want to test this... */ |
| static int cnt; |
| if (write_sq.active == 2) |
| if (++cnt == 10) { |
| /* simulate losing an interrupt */ |
| cnt = 0; |
| return IRQ_HANDLED; |
| } |
| #endif |
| spin_lock(&dmasound.lock); |
| if (write_sq_ignore_int && is_falcon) { |
| /* ++TeSche: Falcon only: ignore first irq because it comes |
| * immediately after starting a frame. after that, irqs come |
| * (almost) like on the TT. |
| */ |
| write_sq_ignore_int = 0; |
| goto out; |
| } |
| |
| if (!write_sq.active) { |
| /* playing was interrupted and sq_reset() has already cleared |
| * the sq variables, so better don't do anything here. |
| */ |
| WAKE_UP(write_sq.sync_queue); |
| goto out; |
| } |
| |
| /* Probably ;) one frame is finished. Well, in fact it may be that a |
| * pre-programmed one is also finished because there has been a long |
| * delay in interrupt delivery and we've completely lost one, but |
| * there's no way to detect such a situation. In such a case the last |
| * frame will be played more than once and the situation will recover |
| * as soon as the irq gets through. |
| */ |
| write_sq.count--; |
| write_sq.active--; |
| |
| if (!write_sq.active) { |
| tt_dmasnd.ctrl = DMASND_CTRL_OFF; |
| write_sq_ignore_int = 1; |
| } |
| |
| WAKE_UP(write_sq.action_queue); |
| /* At least one block of the queue is free now |
| so wake up a writing process blocked because |
| of a full queue. */ |
| |
| if ((write_sq.active != 1) || (write_sq.count != 1)) |
| /* We must be a bit carefully here: write_sq.count indicates the |
| * number of buffers used and not the number of frames to be |
| * played. If write_sq.count==1 and write_sq.active==1 that |
| * means the only remaining frame was already programmed |
| * earlier (and is currently running) so we mustn't call |
| * AtaPlay() here, otherwise we'll play one frame too much. |
| */ |
| AtaPlay(); |
| |
| if (!write_sq.active) WAKE_UP(write_sq.sync_queue); |
| /* We are not playing after AtaPlay(), so there |
| is nothing to play any more. Wake up a process |
| waiting for audio output to drain. */ |
| out: |
| spin_unlock(&dmasound.lock); |
| return IRQ_HANDLED; |
| } |
| |
| |
| /*** Mid level stuff *********************************************************/ |
| |
| |
| /* |
| * /dev/mixer abstraction |
| */ |
| |
| #define RECLEVEL_VOXWARE_TO_GAIN(v) \ |
| ((v) < 0 ? 0 : (v) > 100 ? 15 : (v) * 3 / 20) |
| #define RECLEVEL_GAIN_TO_VOXWARE(v) (((v) * 20 + 2) / 3) |
| |
| |
| static void __init TTMixerInit(void) |
| { |
| atari_microwire_cmd(MW_LM1992_VOLUME(0)); |
| dmasound.volume_left = 0; |
| atari_microwire_cmd(MW_LM1992_BALLEFT(0)); |
| dmasound.volume_right = 0; |
| atari_microwire_cmd(MW_LM1992_BALRIGHT(0)); |
| atari_microwire_cmd(MW_LM1992_TREBLE(0)); |
| atari_microwire_cmd(MW_LM1992_BASS(0)); |
| } |
| |
| static void __init FalconMixerInit(void) |
| { |
| dmasound.volume_left = (tt_dmasnd.output_atten & 0xf00) >> 8; |
| dmasound.volume_right = (tt_dmasnd.output_atten & 0xf0) >> 4; |
| } |
| |
| static int AtaMixerIoctl(u_int cmd, u_long arg) |
| { |
| int data; |
| unsigned long flags; |
| switch (cmd) { |
| case SOUND_MIXER_READ_SPEAKER: |
| if (is_falcon || MACH_IS_TT) { |
| int porta; |
| spin_lock_irqsave(&dmasound.lock, flags); |
| sound_ym.rd_data_reg_sel = 14; |
| porta = sound_ym.rd_data_reg_sel; |
| spin_unlock_irqrestore(&dmasound.lock, flags); |
| return IOCTL_OUT(arg, porta & 0x40 ? 0 : 100); |
| } |
| break; |
| case SOUND_MIXER_WRITE_VOLUME: |
| IOCTL_IN(arg, data); |
| return IOCTL_OUT(arg, dmasound_set_volume(data)); |
| case SOUND_MIXER_WRITE_SPEAKER: |
| if (is_falcon || MACH_IS_TT) { |
| int porta; |
| IOCTL_IN(arg, data); |
| spin_lock_irqsave(&dmasound.lock, flags); |
| sound_ym.rd_data_reg_sel = 14; |
| porta = (sound_ym.rd_data_reg_sel & ~0x40) | |
| (data < 50 ? 0x40 : 0); |
| sound_ym.wd_data = porta; |
| spin_unlock_irqrestore(&dmasound.lock, flags); |
| return IOCTL_OUT(arg, porta & 0x40 ? 0 : 100); |
| } |
| } |
| return -EINVAL; |
| } |
| |
| |
| static int TTMixerIoctl(u_int cmd, u_long arg) |
| { |
| int data; |
| switch (cmd) { |
| case SOUND_MIXER_READ_RECMASK: |
| return IOCTL_OUT(arg, 0); |
| case SOUND_MIXER_READ_DEVMASK: |
| return IOCTL_OUT(arg, |
| SOUND_MASK_VOLUME | SOUND_MASK_TREBLE | SOUND_MASK_BASS | |
| (MACH_IS_TT ? SOUND_MASK_SPEAKER : 0)); |
| case SOUND_MIXER_READ_STEREODEVS: |
| return IOCTL_OUT(arg, SOUND_MASK_VOLUME); |
| case SOUND_MIXER_READ_VOLUME: |
| return IOCTL_OUT(arg, |
| VOLUME_DB_TO_VOXWARE(dmasound.volume_left) | |
| (VOLUME_DB_TO_VOXWARE(dmasound.volume_right) << 8)); |
| case SOUND_MIXER_READ_BASS: |
| return IOCTL_OUT(arg, TONE_DB_TO_VOXWARE(dmasound.bass)); |
| case SOUND_MIXER_READ_TREBLE: |
| return IOCTL_OUT(arg, TONE_DB_TO_VOXWARE(dmasound.treble)); |
| case SOUND_MIXER_READ_OGAIN: |
| return IOCTL_OUT(arg, GAIN_DB_TO_VOXWARE(dmasound.gain)); |
| case SOUND_MIXER_WRITE_BASS: |
| IOCTL_IN(arg, data); |
| return IOCTL_OUT(arg, dmasound_set_bass(data)); |
| case SOUND_MIXER_WRITE_TREBLE: |
| IOCTL_IN(arg, data); |
| return IOCTL_OUT(arg, dmasound_set_treble(data)); |
| case SOUND_MIXER_WRITE_OGAIN: |
| IOCTL_IN(arg, data); |
| return IOCTL_OUT(arg, dmasound_set_gain(data)); |
| } |
| return AtaMixerIoctl(cmd, arg); |
| } |
| |
| static int FalconMixerIoctl(u_int cmd, u_long arg) |
| { |
| int data; |
| switch (cmd) { |
| case SOUND_MIXER_READ_RECMASK: |
| return IOCTL_OUT(arg, SOUND_MASK_MIC); |
| case SOUND_MIXER_READ_DEVMASK: |
| return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_MIC | SOUND_MASK_SPEAKER); |
| case SOUND_MIXER_READ_STEREODEVS: |
| return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_MIC); |
| case SOUND_MIXER_READ_VOLUME: |
| return IOCTL_OUT(arg, |
| VOLUME_ATT_TO_VOXWARE(dmasound.volume_left) | |
| VOLUME_ATT_TO_VOXWARE(dmasound.volume_right) << 8); |
| case SOUND_MIXER_READ_CAPS: |
| return IOCTL_OUT(arg, SOUND_CAP_EXCL_INPUT); |
| case SOUND_MIXER_WRITE_MIC: |
| IOCTL_IN(arg, data); |
| tt_dmasnd.input_gain = |
| RECLEVEL_VOXWARE_TO_GAIN(data & 0xff) << 4 | |
| RECLEVEL_VOXWARE_TO_GAIN(data >> 8 & 0xff); |
| /* fall thru, return set value */ |
| case SOUND_MIXER_READ_MIC: |
| return IOCTL_OUT(arg, |
| RECLEVEL_GAIN_TO_VOXWARE(tt_dmasnd.input_gain >> 4 & 0xf) | |
| RECLEVEL_GAIN_TO_VOXWARE(tt_dmasnd.input_gain & 0xf) << 8); |
| } |
| return AtaMixerIoctl(cmd, arg); |
| } |
| |
| static int AtaWriteSqSetup(void) |
| { |
| write_sq_ignore_int = 0; |
| return 0 ; |
| } |
| |
| static int AtaSqOpen(fmode_t mode) |
| { |
| write_sq_ignore_int = 1; |
| return 0 ; |
| } |
| |
| static int TTStateInfo(char *buffer, size_t space) |
| { |
| int len = 0; |
| len += sprintf(buffer+len, "\tvol left %ddB [-40... 0]\n", |
| dmasound.volume_left); |
| len += sprintf(buffer+len, "\tvol right %ddB [-40... 0]\n", |
| dmasound.volume_right); |
| len += sprintf(buffer+len, "\tbass %ddB [-12...+12]\n", |
| dmasound.bass); |
| len += sprintf(buffer+len, "\ttreble %ddB [-12...+12]\n", |
| dmasound.treble); |
| if (len >= space) { |
| printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; |
| len = space ; |
| } |
| return len; |
| } |
| |
| static int FalconStateInfo(char *buffer, size_t space) |
| { |
| int len = 0; |
| len += sprintf(buffer+len, "\tvol left %ddB [-22.5 ... 0]\n", |
| dmasound.volume_left); |
| len += sprintf(buffer+len, "\tvol right %ddB [-22.5 ... 0]\n", |
| dmasound.volume_right); |
| if (len >= space) { |
| printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; |
| len = space ; |
| } |
| return len; |
| } |
| |
| |
| /*** Machine definitions *****************************************************/ |
| |
| static SETTINGS def_hard_falcon = { |
| .format = AFMT_S8, |
| .stereo = 0, |
| .size = 8, |
| .speed = 8195 |
| } ; |
| |
| static SETTINGS def_hard_tt = { |
| .format = AFMT_S8, |
| .stereo = 0, |
| .size = 8, |
| .speed = 12517 |
| } ; |
| |
| static SETTINGS def_soft = { |
| .format = AFMT_U8, |
| .stereo = 0, |
| .size = 8, |
| .speed = 8000 |
| } ; |
| |
| static __initdata MACHINE machTT = { |
| .name = "Atari", |
| .name2 = "TT", |
| .owner = THIS_MODULE, |
| .dma_alloc = AtaAlloc, |
| .dma_free = AtaFree, |
| .irqinit = AtaIrqInit, |
| #ifdef MODULE |
| .irqcleanup = AtaIrqCleanUp, |
| #endif /* MODULE */ |
| .init = TTInit, |
| .silence = TTSilence, |
| .setFormat = TTSetFormat, |
| .setVolume = TTSetVolume, |
| .setBass = AtaSetBass, |
| .setTreble = AtaSetTreble, |
| .setGain = TTSetGain, |
| .play = AtaPlay, |
| .mixer_init = TTMixerInit, |
| .mixer_ioctl = TTMixerIoctl, |
| .write_sq_setup = AtaWriteSqSetup, |
| .sq_open = AtaSqOpen, |
| .state_info = TTStateInfo, |
| .min_dsp_speed = 6258, |
| .version = ((DMASOUND_ATARI_REVISION<<8) | DMASOUND_ATARI_EDITION), |
| .hardware_afmts = AFMT_S8, /* h'ware-supported formats *only* here */ |
| .capabilities = DSP_CAP_BATCH /* As per SNDCTL_DSP_GETCAPS */ |
| }; |
| |
| static __initdata MACHINE machFalcon = { |
| .name = "Atari", |
| .name2 = "FALCON", |
| .dma_alloc = AtaAlloc, |
| .dma_free = AtaFree, |
| .irqinit = AtaIrqInit, |
| #ifdef MODULE |
| .irqcleanup = AtaIrqCleanUp, |
| #endif /* MODULE */ |
| .init = FalconInit, |
| .silence = FalconSilence, |
| .setFormat = FalconSetFormat, |
| .setVolume = FalconSetVolume, |
| .setBass = AtaSetBass, |
| .setTreble = AtaSetTreble, |
| .play = AtaPlay, |
| .mixer_init = FalconMixerInit, |
| .mixer_ioctl = FalconMixerIoctl, |
| .write_sq_setup = AtaWriteSqSetup, |
| .sq_open = AtaSqOpen, |
| .state_info = FalconStateInfo, |
| .min_dsp_speed = 8195, |
| .version = ((DMASOUND_ATARI_REVISION<<8) | DMASOUND_ATARI_EDITION), |
| .hardware_afmts = (AFMT_S8 | AFMT_S16_BE), /* h'ware-supported formats *only* here */ |
| .capabilities = DSP_CAP_BATCH /* As per SNDCTL_DSP_GETCAPS */ |
| }; |
| |
| |
| /*** Config & Setup **********************************************************/ |
| |
| |
| static int __init dmasound_atari_init(void) |
| { |
| if (MACH_IS_ATARI && ATARIHW_PRESENT(PCM_8BIT)) { |
| if (ATARIHW_PRESENT(CODEC)) { |
| dmasound.mach = machFalcon; |
| dmasound.mach.default_soft = def_soft ; |
| dmasound.mach.default_hard = def_hard_falcon ; |
| is_falcon = 1; |
| } else if (ATARIHW_PRESENT(MICROWIRE)) { |
| dmasound.mach = machTT; |
| dmasound.mach.default_soft = def_soft ; |
| dmasound.mach.default_hard = def_hard_tt ; |
| is_falcon = 0; |
| } else |
| return -ENODEV; |
| if ((st_mfp.int_en_a & st_mfp.int_mk_a & 0x20) == 0) |
| return dmasound_init(); |
| else { |
| printk("DMA sound driver: Timer A interrupt already in use\n"); |
| return -EBUSY; |
| } |
| } |
| return -ENODEV; |
| } |
| |
| static void __exit dmasound_atari_cleanup(void) |
| { |
| dmasound_deinit(); |
| } |
| |
| module_init(dmasound_atari_init); |
| module_exit(dmasound_atari_cleanup); |
| MODULE_LICENSE("GPL"); |