| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Rockchip RK3288 Clock and Reset Unit (CRU) |
| |
| maintainers: |
| - Elaine Zhang <zhangqing@rock-chips.com> |
| - Heiko Stuebner <heiko@sntech.de> |
| |
| description: | |
| The RK3288 clock controller generates and supplies clocks to various |
| controllers within the SoC and also implements a reset controller for SoC |
| peripherals. |
| |
| A revision of this SoC is available: rk3288w. The clock tree is a bit |
| different so another dt-compatible is available. Noticed that it is only |
| setting the difference but there is no automatic revision detection. This |
| should be performed by boot loaders. |
| |
| Each clock is assigned an identifier and client nodes can use this identifier |
| to specify the clock which they consume. All available clocks are defined as |
| preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be |
| used in device tree sources. Similar macros exist for the reset sources in |
| these files. |
| |
| There are several clocks that are generated outside the SoC. It is expected |
| that they are defined using standard clock bindings with following |
| clock-output-names: |
| - "xin24m" - crystal input - required, |
| - "xin32k" - rtc clock - optional, |
| - "ext_i2s" - external I2S clock - optional, |
| - "ext_hsadc" - external HSADC clock - optional, |
| - "ext_edp_24m" - external display port clock - optional, |
| - "ext_vip" - external VIP clock - optional, |
| - "ext_isp" - external ISP clock - optional, |
| - "ext_jtag" - external JTAG clock - optional |
| |
| properties: |
| compatible: |
| enum: |
| - rockchip,rk3288-cru |
| - rockchip,rk3288w-cru |
| |
| reg: |
| maxItems: 1 |
| |
| "#clock-cells": |
| const: 1 |
| |
| "#reset-cells": |
| const: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| const: xin24m |
| |
| rockchip,grf: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Phandle to the syscon managing the "general register files" (GRF), |
| if missing pll rates are not changeable, due to the missing pll |
| lock status. |
| |
| required: |
| - compatible |
| - reg |
| - "#clock-cells" |
| - "#reset-cells" |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| cru: clock-controller@ff760000 { |
| compatible = "rockchip,rk3288-cru"; |
| reg = <0xff760000 0x1000>; |
| rockchip,grf = <&grf>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |