blob: 29df84b81552ead53272573a34600fcc4b8e2b21 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include "rk3368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Rockchip PX5 EVB";
compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
aliases {
mmc0 = &sdmmc;
mmc1 = &emmc;
};
chosen {
stdout-path = "serial4:115200n8";
};
memory@0 {
reg = <0x0 0x0 0x0 0x40000000>;
device_type = "memory";
};
keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
wakeup-source;
};
};
vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
&emmc {
status = "okay";
bus-width = <8>;
cap-mmc-highspeed;
clock-frequency = <150000000>;
mmc-hs200-1_8v;
no-sdio;
no-sd;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc18_flash>;
};
&i2c0 {
status = "okay";
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
rockchip,system-power-controller;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_sys>;
vcc10-supply = <&vcc_sys>;
vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc_io>;
clock-output-names = "xin32k", "rk808-clkout2";
#clock-cells = <1>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vdd_cpu";
};
vdd_log: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vdd_log";
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
};
vcc18_flash: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_flash";
};
vcca_33: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_33";
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
};
avdd_33: LDO_REG4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avdd_33";
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
};
vdd10_lcd: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
};
vcc_18: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
};
vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
};
vcc_sd: SWITCH_REG1 {
regulator-name = "vcc_sd";
};
vcc33_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc33_lcd";
};
};
};
};
&i2c1 {
status = "okay";
accelerometer@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&gpio2>;
interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c2 {
status = "okay";
gsl1680: touchscreen@40 {
compatible = "silead,gsl1680";
reg = <0x40>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;
};
};
&pinctrl {
keys {
pwr_key: pwr-key {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_sleep: pmic-sleep {
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&sdmmc {
status = "okay";
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
no-sdio;
sd-uhs-sdr12;
sd-uhs-sdr25;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>;
rockchip,default-sample-phase = <90>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
};
&tsadc {
status = "okay";
rockchip,hw-tshut-mode = <0>; /* CRU */
rockchip,hw-tshut-polarity = <1>; /* high */
};
&uart4 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};