| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Driver to talk to a remote management controller on IPMB. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/errno.h> |
| #include <linux/i2c.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/poll.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/semaphore.h> |
| #include <linux/kthread.h> |
| #include <linux/wait.h> |
| #include <linux/ipmi_msgdefs.h> |
| #include <linux/ipmi_smi.h> |
| |
| #define DEVICE_NAME "ipmi-ipmb" |
| |
| static int bmcaddr = 0x20; |
| module_param(bmcaddr, int, 0644); |
| MODULE_PARM_DESC(bmcaddr, "Address to use for BMC."); |
| |
| static unsigned int retry_time_ms = 250; |
| module_param(retry_time_ms, uint, 0644); |
| MODULE_PARM_DESC(max_retries, "Timeout time between retries, in milliseconds."); |
| |
| static unsigned int max_retries = 1; |
| module_param(max_retries, uint, 0644); |
| MODULE_PARM_DESC(max_retries, "Max resends of a command before timing out."); |
| |
| /* Add room for the two slave addresses, two checksums, and rqSeq. */ |
| #define IPMB_MAX_MSG_LEN (IPMI_MAX_MSG_LENGTH + 5) |
| |
| struct ipmi_ipmb_dev { |
| struct ipmi_smi *intf; |
| struct i2c_client *client; |
| struct i2c_client *slave; |
| |
| struct ipmi_smi_handlers handlers; |
| |
| bool ready; |
| |
| u8 curr_seq; |
| |
| u8 bmcaddr; |
| u32 retry_time_ms; |
| u32 max_retries; |
| |
| struct ipmi_smi_msg *next_msg; |
| struct ipmi_smi_msg *working_msg; |
| |
| /* Transmit thread. */ |
| struct task_struct *thread; |
| struct semaphore wake_thread; |
| struct semaphore got_rsp; |
| spinlock_t lock; |
| bool stopping; |
| |
| u8 xmitmsg[IPMB_MAX_MSG_LEN]; |
| unsigned int xmitlen; |
| |
| u8 rcvmsg[IPMB_MAX_MSG_LEN]; |
| unsigned int rcvlen; |
| bool overrun; |
| }; |
| |
| static bool valid_ipmb(struct ipmi_ipmb_dev *iidev) |
| { |
| u8 *msg = iidev->rcvmsg; |
| u8 netfn; |
| |
| if (iidev->overrun) |
| return false; |
| |
| /* Minimum message size. */ |
| if (iidev->rcvlen < 7) |
| return false; |
| |
| /* Is it a response? */ |
| netfn = msg[1] >> 2; |
| if (netfn & 1) { |
| /* Response messages have an added completion code. */ |
| if (iidev->rcvlen < 8) |
| return false; |
| } |
| |
| if (ipmb_checksum(msg, 3) != 0) |
| return false; |
| if (ipmb_checksum(msg + 3, iidev->rcvlen - 3) != 0) |
| return false; |
| |
| return true; |
| } |
| |
| static void ipmi_ipmb_check_msg_done(struct ipmi_ipmb_dev *iidev) |
| { |
| struct ipmi_smi_msg *imsg = NULL; |
| u8 *msg = iidev->rcvmsg; |
| bool is_cmd; |
| unsigned long flags; |
| |
| if (iidev->rcvlen == 0) |
| return; |
| if (!valid_ipmb(iidev)) |
| goto done; |
| |
| is_cmd = ((msg[1] >> 2) & 1) == 0; |
| |
| if (is_cmd) { |
| /* Ignore commands until we are up. */ |
| if (!iidev->ready) |
| goto done; |
| |
| /* It's a command, allocate a message for it. */ |
| imsg = ipmi_alloc_smi_msg(); |
| if (!imsg) |
| goto done; |
| imsg->type = IPMI_SMI_MSG_TYPE_IPMB_DIRECT; |
| imsg->data_size = 0; |
| } else { |
| spin_lock_irqsave(&iidev->lock, flags); |
| if (iidev->working_msg) { |
| u8 seq = msg[4] >> 2; |
| bool xmit_rsp = (iidev->working_msg->data[0] >> 2) & 1; |
| |
| /* |
| * Responses should carry the sequence we sent |
| * them with. If it's a transmitted response, |
| * ignore it. And if the message hasn't been |
| * transmitted, ignore it. |
| */ |
| if (!xmit_rsp && seq == iidev->curr_seq) { |
| iidev->curr_seq = (iidev->curr_seq + 1) & 0x3f; |
| |
| imsg = iidev->working_msg; |
| iidev->working_msg = NULL; |
| } |
| } |
| spin_unlock_irqrestore(&iidev->lock, flags); |
| } |
| |
| if (!imsg) |
| goto done; |
| |
| if (imsg->type == IPMI_SMI_MSG_TYPE_IPMB_DIRECT) { |
| imsg->rsp[0] = msg[1]; /* NetFn/LUN */ |
| /* |
| * Keep the source address, rqSeq. Drop the trailing |
| * checksum. |
| */ |
| memcpy(imsg->rsp + 1, msg + 3, iidev->rcvlen - 4); |
| imsg->rsp_size = iidev->rcvlen - 3; |
| } else { |
| imsg->rsp[0] = msg[1]; /* NetFn/LUN */ |
| /* |
| * Skip the source address, rqSeq. Drop the trailing |
| * checksum. |
| */ |
| memcpy(imsg->rsp + 1, msg + 5, iidev->rcvlen - 6); |
| imsg->rsp_size = iidev->rcvlen - 5; |
| } |
| ipmi_smi_msg_received(iidev->intf, imsg); |
| if (!is_cmd) |
| up(&iidev->got_rsp); |
| |
| done: |
| iidev->overrun = false; |
| iidev->rcvlen = 0; |
| } |
| |
| /* |
| * The IPMB protocol only supports i2c writes so there is no need to |
| * support I2C_SLAVE_READ* events, except to know if the other end has |
| * issued a read without going to stop mode. |
| */ |
| static int ipmi_ipmb_slave_cb(struct i2c_client *client, |
| enum i2c_slave_event event, u8 *val) |
| { |
| struct ipmi_ipmb_dev *iidev = i2c_get_clientdata(client); |
| |
| switch (event) { |
| case I2C_SLAVE_WRITE_REQUESTED: |
| ipmi_ipmb_check_msg_done(iidev); |
| /* |
| * First byte is the slave address, to ease the checksum |
| * calculation. |
| */ |
| iidev->rcvmsg[0] = client->addr << 1; |
| iidev->rcvlen = 1; |
| break; |
| |
| case I2C_SLAVE_WRITE_RECEIVED: |
| if (iidev->rcvlen >= sizeof(iidev->rcvmsg)) |
| iidev->overrun = true; |
| else |
| iidev->rcvmsg[iidev->rcvlen++] = *val; |
| break; |
| |
| case I2C_SLAVE_READ_REQUESTED: |
| case I2C_SLAVE_STOP: |
| ipmi_ipmb_check_msg_done(iidev); |
| break; |
| |
| case I2C_SLAVE_READ_PROCESSED: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void ipmi_ipmb_send_response(struct ipmi_ipmb_dev *iidev, |
| struct ipmi_smi_msg *msg, u8 cc) |
| { |
| if ((msg->data[0] >> 2) & 1) { |
| /* |
| * It's a response being sent, we needto return a |
| * response response. Fake a send msg command |
| * response with channel 0. This will always be ipmb |
| * direct. |
| */ |
| msg->data[0] = (IPMI_NETFN_APP_REQUEST | 1) << 2; |
| msg->data[3] = IPMI_SEND_MSG_CMD; |
| msg->data[4] = cc; |
| msg->data_size = 5; |
| } |
| msg->rsp[0] = msg->data[0] | (1 << 2); |
| if (msg->type == IPMI_SMI_MSG_TYPE_IPMB_DIRECT) { |
| msg->rsp[1] = msg->data[1]; |
| msg->rsp[2] = msg->data[2]; |
| msg->rsp[3] = msg->data[3]; |
| msg->rsp[4] = cc; |
| msg->rsp_size = 5; |
| } else { |
| msg->rsp[1] = msg->data[1]; |
| msg->rsp[2] = cc; |
| msg->rsp_size = 3; |
| } |
| ipmi_smi_msg_received(iidev->intf, msg); |
| } |
| |
| static void ipmi_ipmb_format_for_xmit(struct ipmi_ipmb_dev *iidev, |
| struct ipmi_smi_msg *msg) |
| { |
| if (msg->type == IPMI_SMI_MSG_TYPE_IPMB_DIRECT) { |
| iidev->xmitmsg[0] = msg->data[1]; |
| iidev->xmitmsg[1] = msg->data[0]; |
| memcpy(iidev->xmitmsg + 4, msg->data + 2, msg->data_size - 2); |
| iidev->xmitlen = msg->data_size + 2; |
| } else { |
| iidev->xmitmsg[0] = iidev->bmcaddr; |
| iidev->xmitmsg[1] = msg->data[0]; |
| iidev->xmitmsg[4] = 0; |
| memcpy(iidev->xmitmsg + 5, msg->data + 1, msg->data_size - 1); |
| iidev->xmitlen = msg->data_size + 4; |
| } |
| iidev->xmitmsg[3] = iidev->slave->addr << 1; |
| if (((msg->data[0] >> 2) & 1) == 0) |
| /* If it's a command, put in our own sequence number. */ |
| iidev->xmitmsg[4] = ((iidev->xmitmsg[4] & 0x03) | |
| (iidev->curr_seq << 2)); |
| |
| /* Now add on the final checksums. */ |
| iidev->xmitmsg[2] = ipmb_checksum(iidev->xmitmsg, 2); |
| iidev->xmitmsg[iidev->xmitlen] = |
| ipmb_checksum(iidev->xmitmsg + 3, iidev->xmitlen - 3); |
| iidev->xmitlen++; |
| } |
| |
| static int ipmi_ipmb_thread(void *data) |
| { |
| struct ipmi_ipmb_dev *iidev = data; |
| |
| while (!kthread_should_stop()) { |
| long ret; |
| struct i2c_msg i2c_msg; |
| struct ipmi_smi_msg *msg = NULL; |
| unsigned long flags; |
| unsigned int retries = 0; |
| |
| /* Wait for a message to send */ |
| ret = down_interruptible(&iidev->wake_thread); |
| if (iidev->stopping) |
| break; |
| if (ret) |
| continue; |
| |
| spin_lock_irqsave(&iidev->lock, flags); |
| if (iidev->next_msg) { |
| msg = iidev->next_msg; |
| iidev->next_msg = NULL; |
| } |
| spin_unlock_irqrestore(&iidev->lock, flags); |
| if (!msg) |
| continue; |
| |
| ipmi_ipmb_format_for_xmit(iidev, msg); |
| |
| retry: |
| i2c_msg.len = iidev->xmitlen - 1; |
| if (i2c_msg.len > 32) { |
| ipmi_ipmb_send_response(iidev, msg, |
| IPMI_REQ_LEN_EXCEEDED_ERR); |
| continue; |
| } |
| |
| i2c_msg.addr = iidev->xmitmsg[0] >> 1; |
| i2c_msg.flags = 0; |
| i2c_msg.buf = iidev->xmitmsg + 1; |
| |
| /* Rely on i2c_transfer for a barrier. */ |
| iidev->working_msg = msg; |
| |
| ret = i2c_transfer(iidev->client->adapter, &i2c_msg, 1); |
| |
| if ((msg->data[0] >> 2) & 1) { |
| /* |
| * It's a response, nothing will be returned |
| * by the other end. |
| */ |
| |
| iidev->working_msg = NULL; |
| ipmi_ipmb_send_response(iidev, msg, |
| ret < 0 ? IPMI_BUS_ERR : 0); |
| continue; |
| } |
| if (ret < 0) { |
| iidev->working_msg = NULL; |
| ipmi_ipmb_send_response(iidev, msg, IPMI_BUS_ERR); |
| continue; |
| } |
| |
| /* A command was sent, wait for its response. */ |
| ret = down_timeout(&iidev->got_rsp, |
| msecs_to_jiffies(iidev->retry_time_ms)); |
| |
| /* |
| * Grab the message if we can. If the handler hasn't |
| * already handled it, the message will still be there. |
| */ |
| spin_lock_irqsave(&iidev->lock, flags); |
| msg = iidev->working_msg; |
| iidev->working_msg = NULL; |
| spin_unlock_irqrestore(&iidev->lock, flags); |
| |
| if (!msg && ret) { |
| /* |
| * If working_msg is not set and we timed out, |
| * that means the message grabbed by |
| * check_msg_done before we could grab it |
| * here. Wait again for check_msg_done to up |
| * the semaphore. |
| */ |
| down(&iidev->got_rsp); |
| } else if (msg && ++retries <= iidev->max_retries) { |
| spin_lock_irqsave(&iidev->lock, flags); |
| iidev->working_msg = msg; |
| spin_unlock_irqrestore(&iidev->lock, flags); |
| goto retry; |
| } |
| |
| if (msg) |
| ipmi_ipmb_send_response(iidev, msg, IPMI_TIMEOUT_ERR); |
| } |
| |
| if (iidev->next_msg) |
| /* Return an unspecified error. */ |
| ipmi_ipmb_send_response(iidev, iidev->next_msg, 0xff); |
| |
| return 0; |
| } |
| |
| static int ipmi_ipmb_start_processing(void *send_info, |
| struct ipmi_smi *new_intf) |
| { |
| struct ipmi_ipmb_dev *iidev = send_info; |
| |
| iidev->intf = new_intf; |
| iidev->ready = true; |
| return 0; |
| } |
| |
| static void ipmi_ipmb_stop_thread(struct ipmi_ipmb_dev *iidev) |
| { |
| if (iidev->thread) { |
| struct task_struct *t = iidev->thread; |
| |
| iidev->thread = NULL; |
| iidev->stopping = true; |
| up(&iidev->wake_thread); |
| up(&iidev->got_rsp); |
| kthread_stop(t); |
| } |
| } |
| |
| static void ipmi_ipmb_shutdown(void *send_info) |
| { |
| struct ipmi_ipmb_dev *iidev = send_info; |
| |
| ipmi_ipmb_stop_thread(iidev); |
| } |
| |
| static void ipmi_ipmb_sender(void *send_info, |
| struct ipmi_smi_msg *msg) |
| { |
| struct ipmi_ipmb_dev *iidev = send_info; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&iidev->lock, flags); |
| BUG_ON(iidev->next_msg); |
| |
| iidev->next_msg = msg; |
| spin_unlock_irqrestore(&iidev->lock, flags); |
| |
| up(&iidev->wake_thread); |
| } |
| |
| static void ipmi_ipmb_request_events(void *send_info) |
| { |
| /* We don't fetch events here. */ |
| } |
| |
| static int ipmi_ipmb_remove(struct i2c_client *client) |
| { |
| struct ipmi_ipmb_dev *iidev = i2c_get_clientdata(client); |
| |
| if (iidev->slave) { |
| i2c_slave_unregister(iidev->slave); |
| if (iidev->slave != iidev->client) |
| i2c_unregister_device(iidev->slave); |
| } |
| iidev->slave = NULL; |
| iidev->client = NULL; |
| ipmi_ipmb_stop_thread(iidev); |
| |
| ipmi_unregister_smi(iidev->intf); |
| |
| return 0; |
| } |
| |
| static int ipmi_ipmb_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct ipmi_ipmb_dev *iidev; |
| struct device_node *slave_np; |
| struct i2c_adapter *slave_adap = NULL; |
| struct i2c_client *slave = NULL; |
| int rv; |
| |
| iidev = devm_kzalloc(&client->dev, sizeof(*iidev), GFP_KERNEL); |
| if (!iidev) |
| return -ENOMEM; |
| |
| if (of_property_read_u8(dev->of_node, "bmcaddr", &iidev->bmcaddr) != 0) |
| iidev->bmcaddr = bmcaddr; |
| if (iidev->bmcaddr == 0 || iidev->bmcaddr & 1) { |
| /* Can't have the write bit set. */ |
| dev_notice(&client->dev, |
| "Invalid bmc address value %2.2x\n", iidev->bmcaddr); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_u32(dev->of_node, "retry-time", |
| &iidev->retry_time_ms) != 0) |
| iidev->retry_time_ms = retry_time_ms; |
| |
| if (of_property_read_u32(dev->of_node, "max-retries", |
| &iidev->max_retries) != 0) |
| iidev->max_retries = max_retries; |
| |
| slave_np = of_parse_phandle(dev->of_node, "slave-dev", 0); |
| if (slave_np) { |
| slave_adap = of_get_i2c_adapter_by_node(slave_np); |
| of_node_put(slave_np); |
| if (!slave_adap) { |
| dev_notice(&client->dev, |
| "Could not find slave adapter\n"); |
| return -EINVAL; |
| } |
| } |
| |
| iidev->client = client; |
| |
| if (slave_adap) { |
| struct i2c_board_info binfo; |
| |
| memset(&binfo, 0, sizeof(binfo)); |
| strscpy(binfo.type, "ipmb-slave", I2C_NAME_SIZE); |
| binfo.addr = client->addr; |
| binfo.flags = I2C_CLIENT_SLAVE; |
| slave = i2c_new_client_device(slave_adap, &binfo); |
| i2c_put_adapter(slave_adap); |
| if (IS_ERR(slave)) { |
| rv = PTR_ERR(slave); |
| dev_notice(&client->dev, |
| "Could not allocate slave device: %d\n", rv); |
| return rv; |
| } |
| i2c_set_clientdata(slave, iidev); |
| } else { |
| slave = client; |
| } |
| i2c_set_clientdata(client, iidev); |
| slave->flags |= I2C_CLIENT_SLAVE; |
| |
| rv = i2c_slave_register(slave, ipmi_ipmb_slave_cb); |
| if (rv) |
| goto out_err; |
| iidev->slave = slave; |
| slave = NULL; |
| |
| iidev->handlers.flags = IPMI_SMI_CAN_HANDLE_IPMB_DIRECT; |
| iidev->handlers.start_processing = ipmi_ipmb_start_processing; |
| iidev->handlers.shutdown = ipmi_ipmb_shutdown; |
| iidev->handlers.sender = ipmi_ipmb_sender; |
| iidev->handlers.request_events = ipmi_ipmb_request_events; |
| |
| spin_lock_init(&iidev->lock); |
| sema_init(&iidev->wake_thread, 0); |
| sema_init(&iidev->got_rsp, 0); |
| |
| iidev->thread = kthread_run(ipmi_ipmb_thread, iidev, |
| "kipmb%4.4x", client->addr); |
| if (IS_ERR(iidev->thread)) { |
| rv = PTR_ERR(iidev->thread); |
| dev_notice(&client->dev, |
| "Could not start kernel thread: error %d\n", rv); |
| goto out_err; |
| } |
| |
| rv = ipmi_register_smi(&iidev->handlers, |
| iidev, |
| &client->dev, |
| iidev->bmcaddr); |
| if (rv) |
| goto out_err; |
| |
| return 0; |
| |
| out_err: |
| if (slave && slave != client) |
| i2c_unregister_device(slave); |
| ipmi_ipmb_remove(client); |
| return rv; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id of_ipmi_ipmb_match[] = { |
| { .type = "ipmi", .compatible = DEVICE_NAME }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_ipmi_ipmb_match); |
| #else |
| #define of_ipmi_ipmb_match NULL |
| #endif |
| |
| static const struct i2c_device_id ipmi_ipmb_id[] = { |
| { DEVICE_NAME, 0 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, ipmi_ipmb_id); |
| |
| static struct i2c_driver ipmi_ipmb_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = DEVICE_NAME, |
| .of_match_table = of_ipmi_ipmb_match, |
| }, |
| .probe_new = ipmi_ipmb_probe, |
| .remove = ipmi_ipmb_remove, |
| .id_table = ipmi_ipmb_id, |
| }; |
| module_i2c_driver(ipmi_ipmb_driver); |
| |
| MODULE_AUTHOR("Corey Minyard"); |
| MODULE_DESCRIPTION("IPMI IPMB driver"); |
| MODULE_LICENSE("GPL v2"); |