| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Data Object Exchange |
| * PCIe r6.0, sec 6.30 DOE |
| * |
| * Copyright (C) 2021 Huawei |
| * Jonathan Cameron <Jonathan.Cameron@huawei.com> |
| * |
| * Copyright (C) 2022 Intel Corporation |
| * Ira Weiny <ira.weiny@intel.com> |
| */ |
| |
| #define dev_fmt(fmt) "DOE: " fmt |
| |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/pci-doe.h> |
| #include <linux/workqueue.h> |
| |
| #define PCI_DOE_PROTOCOL_DISCOVERY 0 |
| |
| /* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */ |
| #define PCI_DOE_TIMEOUT HZ |
| #define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128) |
| |
| #define PCI_DOE_FLAG_CANCEL 0 |
| #define PCI_DOE_FLAG_DEAD 1 |
| |
| /** |
| * struct pci_doe_mb - State for a single DOE mailbox |
| * |
| * This state is used to manage a single DOE mailbox capability. All fields |
| * should be considered opaque to the consumers and the structure passed into |
| * the helpers below after being created by devm_pci_doe_create() |
| * |
| * @pdev: PCI device this mailbox belongs to |
| * @cap_offset: Capability offset |
| * @prots: Array of protocols supported (encoded as long values) |
| * @wq: Wait queue for work item |
| * @work_queue: Queue of pci_doe_work items |
| * @flags: Bit array of PCI_DOE_FLAG_* flags |
| */ |
| struct pci_doe_mb { |
| struct pci_dev *pdev; |
| u16 cap_offset; |
| struct xarray prots; |
| |
| wait_queue_head_t wq; |
| struct workqueue_struct *work_queue; |
| unsigned long flags; |
| }; |
| |
| static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout) |
| { |
| if (wait_event_timeout(doe_mb->wq, |
| test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags), |
| timeout)) |
| return -EIO; |
| return 0; |
| } |
| |
| static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| |
| pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val); |
| } |
| |
| static int pci_doe_abort(struct pci_doe_mb *doe_mb) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| unsigned long timeout_jiffies; |
| |
| pci_dbg(pdev, "[%x] Issuing Abort\n", offset); |
| |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; |
| pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT); |
| |
| do { |
| int rc; |
| u32 val; |
| |
| rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); |
| if (rc) |
| return rc; |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| |
| /* Abort success! */ |
| if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) && |
| !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) |
| return 0; |
| |
| } while (!time_after(jiffies, timeout_jiffies)); |
| |
| /* Abort has timed out and the MB is dead */ |
| pci_err(pdev, "[%x] ABORT timed out\n", offset); |
| return -EIO; |
| } |
| |
| static int pci_doe_send_req(struct pci_doe_mb *doe_mb, |
| struct pci_doe_task *task) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| u32 val; |
| int i; |
| |
| /* |
| * Check the DOE busy bit is not set. If it is set, this could indicate |
| * someone other than Linux (e.g. firmware) is using the mailbox. Note |
| * it is expected that firmware and OS will negotiate access rights via |
| * an, as yet to be defined, method. |
| */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_BUSY, val)) |
| return -EBUSY; |
| |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) |
| return -EIO; |
| |
| /* Write DOE Header */ |
| val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) | |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type); |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); |
| /* Length is 2 DW of header + length of payload in DW */ |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, |
| 2 + task->request_pl_sz / |
| sizeof(u32))); |
| for (i = 0; i < task->request_pl_sz / sizeof(u32); i++) |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, |
| task->request_pl[i]); |
| |
| pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO); |
| |
| return 0; |
| } |
| |
| static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| u32 val; |
| |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) |
| return true; |
| return false; |
| } |
| |
| static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) |
| { |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| size_t length, payload_length; |
| u32 val; |
| int i; |
| |
| /* Read the first dword to get the protocol */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) || |
| (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) { |
| dev_err_ratelimited(&pdev->dev, "[%x] expected [VID, Protocol] = [%04x, %02x], got [%04x, %02x]\n", |
| doe_mb->cap_offset, task->prot.vid, task->prot.type, |
| FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val), |
| FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val)); |
| return -EIO; |
| } |
| |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| /* Read the second dword to get the length */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| |
| length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val); |
| if (length > SZ_1M || length < 2) |
| return -EIO; |
| |
| /* First 2 dwords have already been read */ |
| length -= 2; |
| payload_length = min(length, task->response_pl_sz / sizeof(u32)); |
| /* Read the rest of the response payload */ |
| for (i = 0; i < payload_length; i++) { |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, |
| &task->response_pl[i]); |
| /* Prior to the last ack, ensure Data Object Ready */ |
| if (i == (payload_length - 1) && !pci_doe_data_obj_ready(doe_mb)) |
| return -EIO; |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| } |
| |
| /* Flush excess length */ |
| for (; i < length; i++) { |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); |
| } |
| |
| /* Final error check to pick up on any since Data Object Ready */ |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) |
| return -EIO; |
| |
| return min(length, task->response_pl_sz / sizeof(u32)) * sizeof(u32); |
| } |
| |
| static void signal_task_complete(struct pci_doe_task *task, int rv) |
| { |
| task->rv = rv; |
| task->complete(task); |
| } |
| |
| static void signal_task_abort(struct pci_doe_task *task, int rv) |
| { |
| struct pci_doe_mb *doe_mb = task->doe_mb; |
| struct pci_dev *pdev = doe_mb->pdev; |
| |
| if (pci_doe_abort(doe_mb)) { |
| /* |
| * If the device can't process an abort; set the mailbox dead |
| * - no more submissions |
| */ |
| pci_err(pdev, "[%x] Abort failed marking mailbox dead\n", |
| doe_mb->cap_offset); |
| set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); |
| } |
| signal_task_complete(task, rv); |
| } |
| |
| static void doe_statemachine_work(struct work_struct *work) |
| { |
| struct pci_doe_task *task = container_of(work, struct pci_doe_task, |
| work); |
| struct pci_doe_mb *doe_mb = task->doe_mb; |
| struct pci_dev *pdev = doe_mb->pdev; |
| int offset = doe_mb->cap_offset; |
| unsigned long timeout_jiffies; |
| u32 val; |
| int rc; |
| |
| if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) { |
| signal_task_complete(task, -EIO); |
| return; |
| } |
| |
| /* Send request */ |
| rc = pci_doe_send_req(doe_mb, task); |
| if (rc) { |
| /* |
| * The specification does not provide any guidance on how to |
| * resolve conflicting requests from other entities. |
| * Furthermore, it is likely that busy will not be detected |
| * most of the time. Flag any detection of status busy with an |
| * error. |
| */ |
| if (rc == -EBUSY) |
| dev_err_ratelimited(&pdev->dev, "[%x] busy detected; another entity is sending conflicting requests\n", |
| offset); |
| signal_task_abort(task, rc); |
| return; |
| } |
| |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; |
| /* Poll for response */ |
| retry_resp: |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) { |
| signal_task_abort(task, -EIO); |
| return; |
| } |
| |
| if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) { |
| if (time_after(jiffies, timeout_jiffies)) { |
| signal_task_abort(task, -EIO); |
| return; |
| } |
| rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); |
| if (rc) { |
| signal_task_abort(task, rc); |
| return; |
| } |
| goto retry_resp; |
| } |
| |
| rc = pci_doe_recv_resp(doe_mb, task); |
| if (rc < 0) { |
| signal_task_abort(task, rc); |
| return; |
| } |
| |
| signal_task_complete(task, rc); |
| } |
| |
| static void pci_doe_task_complete(struct pci_doe_task *task) |
| { |
| complete(task->private); |
| } |
| |
| static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid, |
| u8 *protocol) |
| { |
| u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX, |
| *index); |
| u32 response_pl; |
| DECLARE_COMPLETION_ONSTACK(c); |
| struct pci_doe_task task = { |
| .prot.vid = PCI_VENDOR_ID_PCI_SIG, |
| .prot.type = PCI_DOE_PROTOCOL_DISCOVERY, |
| .request_pl = &request_pl, |
| .request_pl_sz = sizeof(request_pl), |
| .response_pl = &response_pl, |
| .response_pl_sz = sizeof(response_pl), |
| .complete = pci_doe_task_complete, |
| .private = &c, |
| }; |
| int rc; |
| |
| rc = pci_doe_submit_task(doe_mb, &task); |
| if (rc < 0) |
| return rc; |
| |
| wait_for_completion(&c); |
| |
| if (task.rv != sizeof(response_pl)) |
| return -EIO; |
| |
| *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl); |
| *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL, |
| response_pl); |
| *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX, |
| response_pl); |
| |
| return 0; |
| } |
| |
| static void *pci_doe_xa_prot_entry(u16 vid, u8 prot) |
| { |
| return xa_mk_value((vid << 8) | prot); |
| } |
| |
| static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb) |
| { |
| u8 index = 0; |
| u8 xa_idx = 0; |
| |
| do { |
| int rc; |
| u16 vid; |
| u8 prot; |
| |
| rc = pci_doe_discovery(doe_mb, &index, &vid, &prot); |
| if (rc) |
| return rc; |
| |
| pci_dbg(doe_mb->pdev, |
| "[%x] Found protocol %d vid: %x prot: %x\n", |
| doe_mb->cap_offset, xa_idx, vid, prot); |
| |
| rc = xa_insert(&doe_mb->prots, xa_idx++, |
| pci_doe_xa_prot_entry(vid, prot), GFP_KERNEL); |
| if (rc) |
| return rc; |
| } while (index); |
| |
| return 0; |
| } |
| |
| static void pci_doe_xa_destroy(void *mb) |
| { |
| struct pci_doe_mb *doe_mb = mb; |
| |
| xa_destroy(&doe_mb->prots); |
| } |
| |
| static void pci_doe_destroy_workqueue(void *mb) |
| { |
| struct pci_doe_mb *doe_mb = mb; |
| |
| destroy_workqueue(doe_mb->work_queue); |
| } |
| |
| static void pci_doe_flush_mb(void *mb) |
| { |
| struct pci_doe_mb *doe_mb = mb; |
| |
| /* Stop all pending work items from starting */ |
| set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); |
| |
| /* Cancel an in progress work item, if necessary */ |
| set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags); |
| wake_up(&doe_mb->wq); |
| |
| /* Flush all work items */ |
| flush_workqueue(doe_mb->work_queue); |
| } |
| |
| /** |
| * pcim_doe_create_mb() - Create a DOE mailbox object |
| * |
| * @pdev: PCI device to create the DOE mailbox for |
| * @cap_offset: Offset of the DOE mailbox |
| * |
| * Create a single mailbox object to manage the mailbox protocol at the |
| * cap_offset specified. |
| * |
| * RETURNS: created mailbox object on success |
| * ERR_PTR(-errno) on failure |
| */ |
| struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset) |
| { |
| struct pci_doe_mb *doe_mb; |
| struct device *dev = &pdev->dev; |
| int rc; |
| |
| doe_mb = devm_kzalloc(dev, sizeof(*doe_mb), GFP_KERNEL); |
| if (!doe_mb) |
| return ERR_PTR(-ENOMEM); |
| |
| doe_mb->pdev = pdev; |
| doe_mb->cap_offset = cap_offset; |
| init_waitqueue_head(&doe_mb->wq); |
| |
| xa_init(&doe_mb->prots); |
| rc = devm_add_action(dev, pci_doe_xa_destroy, doe_mb); |
| if (rc) |
| return ERR_PTR(rc); |
| |
| doe_mb->work_queue = alloc_ordered_workqueue("%s %s DOE [%x]", 0, |
| dev_driver_string(&pdev->dev), |
| pci_name(pdev), |
| doe_mb->cap_offset); |
| if (!doe_mb->work_queue) { |
| pci_err(pdev, "[%x] failed to allocate work queue\n", |
| doe_mb->cap_offset); |
| return ERR_PTR(-ENOMEM); |
| } |
| rc = devm_add_action_or_reset(dev, pci_doe_destroy_workqueue, doe_mb); |
| if (rc) |
| return ERR_PTR(rc); |
| |
| /* Reset the mailbox by issuing an abort */ |
| rc = pci_doe_abort(doe_mb); |
| if (rc) { |
| pci_err(pdev, "[%x] failed to reset mailbox with abort command : %d\n", |
| doe_mb->cap_offset, rc); |
| return ERR_PTR(rc); |
| } |
| |
| /* |
| * The state machine and the mailbox should be in sync now; |
| * Set up mailbox flush prior to using the mailbox to query protocols. |
| */ |
| rc = devm_add_action_or_reset(dev, pci_doe_flush_mb, doe_mb); |
| if (rc) |
| return ERR_PTR(rc); |
| |
| rc = pci_doe_cache_protocols(doe_mb); |
| if (rc) { |
| pci_err(pdev, "[%x] failed to cache protocols : %d\n", |
| doe_mb->cap_offset, rc); |
| return ERR_PTR(rc); |
| } |
| |
| return doe_mb; |
| } |
| EXPORT_SYMBOL_GPL(pcim_doe_create_mb); |
| |
| /** |
| * pci_doe_supports_prot() - Return if the DOE instance supports the given |
| * protocol |
| * @doe_mb: DOE mailbox capability to query |
| * @vid: Protocol Vendor ID |
| * @type: Protocol type |
| * |
| * RETURNS: True if the DOE mailbox supports the protocol specified |
| */ |
| bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type) |
| { |
| unsigned long index; |
| void *entry; |
| |
| /* The discovery protocol must always be supported */ |
| if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY) |
| return true; |
| |
| xa_for_each(&doe_mb->prots, index, entry) |
| if (entry == pci_doe_xa_prot_entry(vid, type)) |
| return true; |
| |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(pci_doe_supports_prot); |
| |
| /** |
| * pci_doe_submit_task() - Submit a task to be processed by the state machine |
| * |
| * @doe_mb: DOE mailbox capability to submit to |
| * @task: task to be queued |
| * |
| * Submit a DOE task (request/response) to the DOE mailbox to be processed. |
| * Returns upon queueing the task object. If the queue is full this function |
| * will sleep until there is room in the queue. |
| * |
| * task->complete will be called when the state machine is done processing this |
| * task. |
| * |
| * Excess data will be discarded. |
| * |
| * RETURNS: 0 when task has been successfully queued, -ERRNO on error |
| */ |
| int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) |
| { |
| if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type)) |
| return -EINVAL; |
| |
| /* |
| * DOE requests must be a whole number of DW and the response needs to |
| * be big enough for at least 1 DW |
| */ |
| if (task->request_pl_sz % sizeof(u32) || |
| task->response_pl_sz < sizeof(u32)) |
| return -EINVAL; |
| |
| if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) |
| return -EIO; |
| |
| task->doe_mb = doe_mb; |
| INIT_WORK(&task->work, doe_statemachine_work); |
| queue_work(doe_mb->work_queue, &task->work); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pci_doe_submit_task); |