| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Purpose: PCI Express Port Bus Driver |
| * Author: Tom Nguyen <tom.l.nguyen@intel.com> |
| * |
| * Copyright (C) 2004 Intel |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/init.h> |
| #include <linux/aer.h> |
| #include <linux/dmi.h> |
| |
| #include "../pci.h" |
| #include "portdrv.h" |
| |
| /* If this switch is set, PCIe port native services should not be enabled. */ |
| bool pcie_ports_disabled; |
| |
| /* |
| * If the user specified "pcie_ports=native", use the PCIe services regardless |
| * of whether the platform has given us permission. On ACPI systems, this |
| * means we ignore _OSC. |
| */ |
| bool pcie_ports_native; |
| |
| /* |
| * If the user specified "pcie_ports=dpc-native", use the Linux DPC PCIe |
| * service even if the platform hasn't given us permission. |
| */ |
| bool pcie_ports_dpc_native; |
| |
| static int __init pcie_port_setup(char *str) |
| { |
| if (!strncmp(str, "compat", 6)) |
| pcie_ports_disabled = true; |
| else if (!strncmp(str, "native", 6)) |
| pcie_ports_native = true; |
| else if (!strncmp(str, "dpc-native", 10)) |
| pcie_ports_dpc_native = true; |
| |
| return 1; |
| } |
| __setup("pcie_ports=", pcie_port_setup); |
| |
| /* global data */ |
| |
| #ifdef CONFIG_PM |
| static int pcie_port_runtime_suspend(struct device *dev) |
| { |
| if (!to_pci_dev(dev)->bridge_d3) |
| return -EBUSY; |
| |
| return pcie_port_device_runtime_suspend(dev); |
| } |
| |
| static int pcie_port_runtime_idle(struct device *dev) |
| { |
| /* |
| * Assume the PCI core has set bridge_d3 whenever it thinks the port |
| * should be good to go to D3. Everything else, including moving |
| * the port to D3, is handled by the PCI core. |
| */ |
| return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY; |
| } |
| |
| static const struct dev_pm_ops pcie_portdrv_pm_ops = { |
| .suspend = pcie_port_device_suspend, |
| .resume_noirq = pcie_port_device_resume_noirq, |
| .resume = pcie_port_device_resume, |
| .freeze = pcie_port_device_suspend, |
| .thaw = pcie_port_device_resume, |
| .poweroff = pcie_port_device_suspend, |
| .restore_noirq = pcie_port_device_resume_noirq, |
| .restore = pcie_port_device_resume, |
| .runtime_suspend = pcie_port_runtime_suspend, |
| .runtime_resume = pcie_port_device_runtime_resume, |
| .runtime_idle = pcie_port_runtime_idle, |
| }; |
| |
| #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) |
| |
| #else /* !PM */ |
| |
| #define PCIE_PORTDRV_PM_OPS NULL |
| #endif /* !PM */ |
| |
| /* |
| * pcie_portdrv_probe - Probe PCI-Express port devices |
| * @dev: PCI-Express port device being probed |
| * |
| * If detected invokes the pcie_port_device_register() method for |
| * this port device. |
| * |
| */ |
| static int pcie_portdrv_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| int type = pci_pcie_type(dev); |
| int status; |
| |
| if (!pci_is_pcie(dev) || |
| ((type != PCI_EXP_TYPE_ROOT_PORT) && |
| (type != PCI_EXP_TYPE_UPSTREAM) && |
| (type != PCI_EXP_TYPE_DOWNSTREAM) && |
| (type != PCI_EXP_TYPE_RC_EC))) |
| return -ENODEV; |
| |
| if (type == PCI_EXP_TYPE_RC_EC) |
| pcie_link_rcec(dev); |
| |
| status = pcie_port_device_register(dev); |
| if (status) |
| return status; |
| |
| pci_save_state(dev); |
| |
| dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE | |
| DPM_FLAG_SMART_SUSPEND); |
| |
| if (pci_bridge_d3_possible(dev)) { |
| /* |
| * Keep the port resumed 100ms to make sure things like |
| * config space accesses from userspace (lspci) will not |
| * cause the port to repeatedly suspend and resume. |
| */ |
| pm_runtime_set_autosuspend_delay(&dev->dev, 100); |
| pm_runtime_use_autosuspend(&dev->dev); |
| pm_runtime_mark_last_busy(&dev->dev); |
| pm_runtime_put_autosuspend(&dev->dev); |
| pm_runtime_allow(&dev->dev); |
| } |
| |
| return 0; |
| } |
| |
| static void pcie_portdrv_remove(struct pci_dev *dev) |
| { |
| if (pci_bridge_d3_possible(dev)) { |
| pm_runtime_forbid(&dev->dev); |
| pm_runtime_get_noresume(&dev->dev); |
| pm_runtime_dont_use_autosuspend(&dev->dev); |
| } |
| |
| pcie_port_device_remove(dev); |
| } |
| |
| static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev, |
| pci_channel_state_t error) |
| { |
| if (error == pci_channel_io_frozen) |
| return PCI_ERS_RESULT_NEED_RESET; |
| return PCI_ERS_RESULT_CAN_RECOVER; |
| } |
| |
| static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev) |
| { |
| size_t off = offsetof(struct pcie_port_service_driver, slot_reset); |
| device_for_each_child(&dev->dev, &off, pcie_port_device_iter); |
| |
| pci_restore_state(dev); |
| pci_save_state(dev); |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev) |
| { |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| /* |
| * LINUX Device Driver Model |
| */ |
| static const struct pci_device_id port_pci_ids[] = { |
| /* handle any PCI-Express port */ |
| { PCI_DEVICE_CLASS(PCI_CLASS_BRIDGE_PCI_NORMAL, ~0) }, |
| /* subtractive decode PCI-to-PCI bridge, class type is 060401h */ |
| { PCI_DEVICE_CLASS(PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE, ~0) }, |
| /* handle any Root Complex Event Collector */ |
| { PCI_DEVICE_CLASS(((PCI_CLASS_SYSTEM_RCEC << 8) | 0x00), ~0) }, |
| { }, |
| }; |
| |
| static const struct pci_error_handlers pcie_portdrv_err_handler = { |
| .error_detected = pcie_portdrv_error_detected, |
| .slot_reset = pcie_portdrv_slot_reset, |
| .mmio_enabled = pcie_portdrv_mmio_enabled, |
| }; |
| |
| static struct pci_driver pcie_portdriver = { |
| .name = "pcieport", |
| .id_table = &port_pci_ids[0], |
| |
| .probe = pcie_portdrv_probe, |
| .remove = pcie_portdrv_remove, |
| .shutdown = pcie_portdrv_remove, |
| |
| .err_handler = &pcie_portdrv_err_handler, |
| |
| .driver_managed_dma = true, |
| |
| .driver.pm = PCIE_PORTDRV_PM_OPS, |
| }; |
| |
| static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) |
| { |
| pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", |
| d->ident); |
| pcie_pme_disable_msi(); |
| return 0; |
| } |
| |
| static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = { |
| /* |
| * Boxes that should not use MSI for PCIe PME signaling. |
| */ |
| { |
| .callback = dmi_pcie_pme_disable_msi, |
| .ident = "MSI Wind U-100", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, |
| "MICRO-STAR INTERNATIONAL CO., LTD"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "U-100"), |
| }, |
| }, |
| {} |
| }; |
| |
| static void __init pcie_init_services(void) |
| { |
| pcie_aer_init(); |
| pcie_pme_init(); |
| pcie_dpc_init(); |
| pcie_hp_init(); |
| } |
| |
| static int __init pcie_portdrv_init(void) |
| { |
| if (pcie_ports_disabled) |
| return -EACCES; |
| |
| pcie_init_services(); |
| dmi_check_system(pcie_portdrv_dmi_table); |
| |
| return pci_register_driver(&pcie_portdriver); |
| } |
| device_initcall(pcie_portdrv_init); |