| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| // Copyright (C) 2022 Samuel Holland <samuel@sholland.org> |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/leds/common.h> |
| |
| /dts-v1/; |
| |
| #include "sun20i-d1.dtsi" |
| #include "sun20i-common-regulators.dtsi" |
| |
| / { |
| model = "MangoPi MQ Pro"; |
| compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1"; |
| |
| aliases { |
| ethernet0 = &rtl8723ds; |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led-0 { |
| color = <LED_COLOR_ID_BLUE>; |
| function = LED_FUNCTION_STATUS; |
| gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ |
| }; |
| }; |
| |
| reg_avdd2v8: avdd2v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "avdd2v8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| vin-supply = <®_vcc_3v3>; |
| }; |
| |
| reg_dvdd: dvdd { |
| compatible = "regulator-fixed"; |
| regulator-name = "dvdd"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| vin-supply = <®_vcc_3v3>; |
| }; |
| |
| reg_vdd_cpu: vdd-cpu { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd-cpu"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| vin-supply = <®_vcc>; |
| }; |
| |
| wifi_pwrseq: wifi-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */ |
| }; |
| }; |
| |
| &cpu0 { |
| cpu-supply = <®_vdd_cpu>; |
| }; |
| |
| &dcxo { |
| clock-frequency = <24000000>; |
| }; |
| |
| &ehci1 { |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| bus-width = <4>; |
| cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ |
| disable-wp; |
| vmmc-supply = <®_vcc_3v3>; |
| vqmmc-supply = <®_vcc_3v3>; |
| pinctrl-0 = <&mmc0_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &mmc1 { |
| bus-width = <4>; |
| mmc-pwrseq = <&wifi_pwrseq>; |
| non-removable; |
| vmmc-supply = <®_vcc_3v3>; |
| vqmmc-supply = <®_vcc_3v3>; |
| pinctrl-0 = <&mmc1_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| rtl8723ds: wifi@1 { |
| reg = <1>; |
| interrupt-parent = <&pio>; |
| interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */ |
| interrupt-names = "host-wake"; |
| }; |
| }; |
| |
| &ohci1 { |
| status = "okay"; |
| }; |
| |
| &pio { |
| vcc-pe-supply = <®_avdd2v8>; |
| }; |
| |
| &uart0 { |
| pinctrl-0 = <&uart0_pb8_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| uart-has-rtscts; |
| pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "realtek,rtl8723ds-bt"; |
| device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */ |
| enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */ |
| host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */ |
| }; |
| }; |
| |
| &usb_otg { |
| dr_mode = "peripheral"; |
| status = "okay"; |
| }; |
| |
| &usbphy { |
| usb1_vbus-supply = <®_vcc>; |
| status = "okay"; |
| }; |