blob: 34001a30d449a34fb149f71be1140377783aa270 [file] [log] [blame]
/*
* Copyright 2016-2020 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: AMD
*
*/
#include "hw_sequencer_private.h"
#include "dce110/dce110_hw_sequencer.h"
#include "dcn10_hw_sequencer.h"
#include "dcn20/dcn20_hwseq.h"
static const struct hw_sequencer_funcs dcn10_funcs = {
.program_gamut_remap = dcn10_program_gamut_remap,
.init_hw = dcn10_init_hw,
.power_down_on_boot = dcn10_power_down_on_boot,
.apply_ctx_to_hw = dce110_apply_ctx_to_hw,
.apply_ctx_for_surface = NULL,
.program_front_end_for_ctx = dcn20_program_front_end_for_ctx,
.post_unlock_program_front_end = dcn10_post_unlock_program_front_end,
.wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
.update_plane_addr = dcn10_update_plane_addr,
.update_dchub = dcn10_update_dchub,
.update_pending_status = dcn10_update_pending_status,
.program_output_csc = dcn10_program_output_csc,
.enable_accelerated_mode = dce110_enable_accelerated_mode,
.enable_timing_synchronization = dcn10_enable_timing_synchronization,
.enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
.update_info_frame = dce110_update_info_frame,
.send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
.enable_stream = dce110_enable_stream,
.disable_stream = dce110_disable_stream,
.unblank_stream = dcn10_unblank_stream,
.blank_stream = dce110_blank_stream,
.enable_audio_stream = dce110_enable_audio_stream,
.disable_audio_stream = dce110_disable_audio_stream,
.disable_plane = dcn10_disable_plane,
.pipe_control_lock = dcn10_pipe_control_lock,
.cursor_lock = dcn10_cursor_lock,
.interdependent_update_lock = dcn10_lock_all_pipes,
.prepare_bandwidth = dcn10_prepare_bandwidth,
.optimize_bandwidth = dcn10_optimize_bandwidth,
.set_drr = dcn10_set_drr,
.get_position = dcn10_get_position,
.set_static_screen_control = dcn10_set_static_screen_control,
.setup_stereo = dcn10_setup_stereo,
.set_avmute = dce110_set_avmute,
.log_hw_state = dcn10_log_hw_state,
.get_hw_state = dcn10_get_hw_state,
.clear_status_bits = dcn10_clear_status_bits,
.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
.edp_backlight_control = dce110_edp_backlight_control,
.edp_power_control = dce110_edp_power_control,
.edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
.set_cursor_position = dcn10_set_cursor_position,
.set_cursor_attribute = dcn10_set_cursor_attribute,
.set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
.setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
.set_clock = dcn10_set_clock,
.get_clock = dcn10_get_clock,
.get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
.calc_vupdate_position = dcn10_calc_vupdate_position,
.set_backlight_level = dce110_set_backlight_level,
.set_abm_immediate_disable = dce110_set_abm_immediate_disable,
.set_pipe = dce110_set_pipe,
.get_dcc_en_bits = dcn10_get_dcc_en_bits,
.update_visual_confirm_color = dcn10_update_visual_confirm_color,
};
static const struct hwseq_private_funcs dcn10_private_funcs = {
.init_pipes = dcn10_init_pipes,
.update_plane_addr = dcn10_update_plane_addr,
.plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
.program_pipe = dcn10_program_pipe,
.update_mpcc = dcn10_update_mpcc,
.set_input_transfer_func = dcn10_set_input_transfer_func,
.set_output_transfer_func = dcn10_set_output_transfer_func,
.power_down = dce110_power_down,
.enable_display_power_gating = dcn10_dummy_display_power_gating,
.blank_pixel_data = dcn10_blank_pixel_data,
.reset_hw_ctx_wrap = dcn10_reset_hw_ctx_wrap,
.enable_stream_timing = dcn10_enable_stream_timing,
.edp_backlight_control = dce110_edp_backlight_control,
.disable_stream_gating = NULL,
.enable_stream_gating = NULL,
.setup_vupdate_interrupt = dcn10_setup_vupdate_interrupt,
.did_underflow_occur = dcn10_did_underflow_occur,
.init_blank = NULL,
.disable_vga = dcn10_disable_vga,
.bios_golden_init = dcn10_bios_golden_init,
.plane_atomic_disable = dcn10_plane_atomic_disable,
.plane_atomic_power_down = dcn10_plane_atomic_power_down,
.enable_power_gating_plane = dcn10_enable_power_gating_plane,
.dpp_pg_control = dcn10_dpp_pg_control,
.hubp_pg_control = dcn10_hubp_pg_control,
.dsc_pg_control = NULL,
.set_hdr_multiplier = dcn10_set_hdr_multiplier,
.verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
};
void dcn10_hw_sequencer_construct(struct dc *dc)
{
dc->hwss = dcn10_funcs;
dc->hwseq->funcs = dcn10_private_funcs;
}