| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Temperature sensor drivers |
| # |
| menu "Temperature sensors" |
| |
| config IQS620AT_TEMP |
| tristate "Azoteq IQS620AT temperature sensor" |
| depends on MFD_IQS62X || COMPILE_TEST |
| help |
| Say Y here if you want to build support for the Azoteq IQS620AT |
| temperature sensor. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called iqs620at-temp. |
| |
| config LTC2983 |
| tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System" |
| depends on SPI |
| select REGMAP_SPI |
| help |
| Say yes here to build support for the LTC2983 Multi-Sensor |
| high accuracy digital temperature measurement system. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called ltc2983. |
| |
| config MAXIM_THERMOCOUPLE |
| tristate "Maxim thermocouple sensors" |
| depends on SPI |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| If you say yes here you get support for the Maxim series of |
| thermocouple sensors connected via SPI. |
| |
| Supported sensors: |
| * MAX6675 |
| * MAX31855 |
| |
| This driver can also be built as a module. If so, the module will |
| be called maxim_thermocouple. |
| |
| config HID_SENSOR_TEMP |
| tristate "HID Environmental temperature sensor" |
| depends on HID_SENSOR_HUB |
| select IIO_BUFFER |
| select HID_SENSOR_IIO_COMMON |
| select HID_SENSOR_IIO_TRIGGER |
| help |
| Say yes here to build support for the HID SENSOR |
| temperature driver |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hid-sensor-temperature. |
| |
| config MLX90614 |
| tristate "MLX90614 contact-less infrared sensor" |
| depends on I2C |
| help |
| If you say yes here you get support for the Melexis |
| MLX90614 contact-less infrared sensor connected with I2C. |
| |
| This driver can also be built as a module. If so, the module will |
| be called mlx90614. |
| |
| config MLX90632 |
| tristate "MLX90632 contact-less infrared sensor with medical accuracy" |
| depends on I2C |
| select REGMAP_I2C |
| help |
| If you say yes here you get support for the Melexis |
| MLX90632 contact-less infrared sensor with medical accuracy |
| connected with I2C. |
| |
| This driver can also be built as a module. If so, the module will |
| be called mlx90632. |
| |
| config TMP006 |
| tristate "TMP006 infrared thermopile sensor" |
| depends on I2C |
| help |
| If you say yes here you get support for the Texas Instruments |
| TMP006 infrared thermopile sensor. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tmp006. |
| |
| config TMP007 |
| tristate "TMP007 infrared thermopile sensor with Integrated Math Engine" |
| depends on I2C |
| help |
| If you say yes here you get support for the Texas Instruments |
| TMP007 infrared thermopile sensor with Integrated Math Engine. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tmp007. |
| |
| config TMP117 |
| tristate "TMP117 Digital temperature sensor with integrated NV memory" |
| depends on I2C |
| help |
| If you say yes here you get support for the Texas Instruments |
| TMP117 Digital temperature sensor with integrated NV memory. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tmp117. |
| |
| config TSYS01 |
| tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection" |
| depends on I2C |
| select IIO_MS_SENSORS_I2C |
| help |
| If you say yes here you get support for the Measurement Specialties |
| TSYS01 I2C temperature sensor. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tsys01. |
| |
| config TSYS02D |
| tristate "Measurement Specialties TSYS02D temperature sensor" |
| depends on I2C |
| select IIO_MS_SENSORS_I2C |
| help |
| If you say yes here you get support for the Measurement Specialties |
| TSYS02D temperature sensor. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tsys02d. |
| |
| config MAX31856 |
| tristate "MAX31856 thermocouple sensor" |
| depends on SPI |
| help |
| If you say yes here you get support for MAX31856 |
| thermocouple sensor chip connected via SPI. |
| |
| This driver can also be built as a module. If so, the module |
| will be called max31856. |
| |
| config MAX31865 |
| tristate "MAX31865 RTD to Digital converter" |
| depends on SPI |
| help |
| If you say yes here you get support for MAX31865 |
| thermocouple sensor chip connected via SPI. |
| |
| This driver can also be build as a module. If so, the module |
| will be called max31865. |
| |
| endmenu |
