| // SPDX-License-Identifier: GPL-2.0-only |
| |
| /* |
| * Copyright (c) Linumiz 2021 |
| * |
| * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver |
| * |
| * Author: Navin Sankar Velliangiri <navin@linumiz.com> |
| */ |
| |
| #include <linux/ctype.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/spi/spi.h> |
| #include <asm/unaligned.h> |
| |
| /* |
| * The MSB of the register value determines whether the following byte will |
| * be written or read. If it is 0, read will follow and if it is 1, write |
| * will follow. |
| */ |
| #define MAX31865_RD_WR_BIT BIT(7) |
| |
| #define MAX31865_CFG_VBIAS BIT(7) |
| #define MAX31865_CFG_1SHOT BIT(5) |
| #define MAX31865_3WIRE_RTD BIT(4) |
| #define MAX31865_FAULT_STATUS_CLEAR BIT(1) |
| #define MAX31865_FILTER_50HZ BIT(0) |
| |
| /* The MAX31865 registers */ |
| #define MAX31865_CFG_REG 0x00 |
| #define MAX31865_RTD_MSB 0x01 |
| #define MAX31865_FAULT_STATUS 0x07 |
| |
| #define MAX31865_FAULT_OVUV BIT(2) |
| |
| static const char max31865_show_samp_freq[] = "50 60"; |
| |
| static const struct iio_chan_spec max31865_channels[] = { |
| { /* RTD Temperature */ |
| .type = IIO_TEMP, |
| .info_mask_separate = |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
| }, |
| }; |
| |
| struct max31865_data { |
| struct spi_device *spi; |
| struct mutex lock; |
| bool filter_50hz; |
| bool three_wire; |
| u8 buf[2] ____cacheline_aligned; |
| }; |
| |
| static int max31865_read(struct max31865_data *data, u8 reg, |
| unsigned int read_size) |
| { |
| return spi_write_then_read(data->spi, ®, 1, data->buf, read_size); |
| } |
| |
| static int max31865_write(struct max31865_data *data, size_t len) |
| { |
| return spi_write(data->spi, data->buf, len); |
| } |
| |
| static int enable_bias(struct max31865_data *data) |
| { |
| u8 cfg; |
| int ret; |
| |
| ret = max31865_read(data, MAX31865_CFG_REG, 1); |
| if (ret) |
| return ret; |
| |
| cfg = data->buf[0]; |
| |
| data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; |
| data->buf[1] = cfg | MAX31865_CFG_VBIAS; |
| |
| return max31865_write(data, 2); |
| } |
| |
| static int disable_bias(struct max31865_data *data) |
| { |
| u8 cfg; |
| int ret; |
| |
| ret = max31865_read(data, MAX31865_CFG_REG, 1); |
| if (ret) |
| return ret; |
| |
| cfg = data->buf[0]; |
| cfg &= ~MAX31865_CFG_VBIAS; |
| |
| data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; |
| data->buf[1] = cfg; |
| |
| return max31865_write(data, 2); |
| } |
| |
| static int max31865_rtd_read(struct max31865_data *data, int *val) |
| { |
| u8 reg; |
| int ret; |
| |
| /* Enable BIAS to start the conversion */ |
| ret = enable_bias(data); |
| if (ret) |
| return ret; |
| |
| /* wait 10.5ms before initiating the conversion */ |
| msleep(11); |
| |
| ret = max31865_read(data, MAX31865_CFG_REG, 1); |
| if (ret) |
| return ret; |
| |
| reg = data->buf[0]; |
| reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR; |
| data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; |
| data->buf[1] = reg; |
| |
| ret = max31865_write(data, 2); |
| if (ret) |
| return ret; |
| |
| if (data->filter_50hz) { |
| /* 50Hz filter mode requires 62.5ms to complete */ |
| msleep(63); |
| } else { |
| /* 60Hz filter mode requires 52ms to complete */ |
| msleep(52); |
| } |
| |
| ret = max31865_read(data, MAX31865_RTD_MSB, 2); |
| if (ret) |
| return ret; |
| |
| *val = get_unaligned_be16(&data->buf) >> 1; |
| |
| return disable_bias(data); |
| } |
| |
| static int max31865_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct max31865_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| mutex_lock(&data->lock); |
| ret = max31865_rtd_read(data, val); |
| mutex_unlock(&data->lock); |
| if (ret) |
| return ret; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| /* Temp. Data resolution is 0.03125 degree centigrade */ |
| *val = 31; |
| *val2 = 250000; /* 1000 * 0.03125 */ |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int max31865_init(struct max31865_data *data) |
| { |
| u8 cfg; |
| int ret; |
| |
| ret = max31865_read(data, MAX31865_CFG_REG, 1); |
| if (ret) |
| return ret; |
| |
| cfg = data->buf[0]; |
| |
| if (data->three_wire) |
| /* 3-wire RTD connection */ |
| cfg |= MAX31865_3WIRE_RTD; |
| |
| if (data->filter_50hz) |
| /* 50Hz noise rejection filter */ |
| cfg |= MAX31865_FILTER_50HZ; |
| |
| data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; |
| data->buf[1] = cfg; |
| |
| return max31865_write(data, 2); |
| } |
| |
| static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf) |
| { |
| int ret; |
| bool fault; |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct max31865_data *data = iio_priv(indio_dev); |
| |
| ret = max31865_read(data, MAX31865_FAULT_STATUS, 1); |
| if (ret) |
| return ret; |
| |
| fault = data->buf[0] & faultbit; |
| |
| return sprintf(buf, "%d\n", fault); |
| } |
| |
| static ssize_t show_fault_ovuv(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return show_fault(dev, MAX31865_FAULT_OVUV, buf); |
| } |
| |
| static ssize_t show_filter(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct max31865_data *data = iio_priv(indio_dev); |
| |
| return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60); |
| } |
| |
| static ssize_t set_filter(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t len) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct max31865_data *data = iio_priv(indio_dev); |
| unsigned int freq; |
| int ret; |
| |
| ret = kstrtouint(buf, 10, &freq); |
| if (ret) |
| return ret; |
| |
| switch (freq) { |
| case 50: |
| data->filter_50hz = true; |
| break; |
| case 60: |
| data->filter_50hz = false; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mutex_lock(&data->lock); |
| ret = max31865_init(data); |
| mutex_unlock(&data->lock); |
| if (ret) |
| return ret; |
| |
| return len; |
| } |
| |
| static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(max31865_show_samp_freq); |
| static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0); |
| static IIO_DEVICE_ATTR(in_filter_notch_center_frequency, 0644, |
| show_filter, set_filter, 0); |
| |
| static struct attribute *max31865_attributes[] = { |
| &iio_dev_attr_fault_ovuv.dev_attr.attr, |
| &iio_const_attr_sampling_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_filter_notch_center_frequency.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group max31865_group = { |
| .attrs = max31865_attributes, |
| }; |
| |
| static const struct iio_info max31865_info = { |
| .read_raw = max31865_read_raw, |
| .attrs = &max31865_group, |
| }; |
| |
| static int max31865_probe(struct spi_device *spi) |
| { |
| const struct spi_device_id *id = spi_get_device_id(spi); |
| struct iio_dev *indio_dev; |
| struct max31865_data *data; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| data->spi = spi; |
| data->filter_50hz = false; |
| mutex_init(&data->lock); |
| |
| indio_dev->info = &max31865_info; |
| indio_dev->name = id->name; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = max31865_channels; |
| indio_dev->num_channels = ARRAY_SIZE(max31865_channels); |
| |
| if (of_property_read_bool(spi->dev.of_node, "maxim,3-wire")) { |
| /* select 3 wire */ |
| data->three_wire = 1; |
| } else { |
| /* select 2 or 4 wire */ |
| data->three_wire = 0; |
| } |
| |
| ret = max31865_init(data); |
| if (ret) { |
| dev_err(&spi->dev, "error: Failed to configure max31865\n"); |
| return ret; |
| } |
| |
| return devm_iio_device_register(&spi->dev, indio_dev); |
| } |
| |
| static const struct spi_device_id max31865_id[] = { |
| { "max31865", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, max31865_id); |
| |
| static const struct of_device_id max31865_of_match[] = { |
| { .compatible = "maxim,max31865" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, max31865_of_match); |
| |
| static struct spi_driver max31865_driver = { |
| .driver = { |
| .name = "max31865", |
| .of_match_table = max31865_of_match, |
| }, |
| .probe = max31865_probe, |
| .id_table = max31865_id, |
| }; |
| module_spi_driver(max31865_driver); |
| |
| MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>"); |
| MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver"); |
| MODULE_LICENSE("GPL v2"); |