| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Phy drivers for Qualcomm and Atheros platforms |
| # |
| config PHY_ATH79_USB |
| tristate "Atheros AR71XX/9XXX USB PHY driver" |
| depends on OF && (ATH79 || COMPILE_TEST) |
| default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM |
| select RESET_CONTROLLER |
| select GENERIC_PHY |
| help |
| Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. |
| |
| config PHY_QCOM_APQ8064_SATA |
| tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" |
| depends on ARCH_QCOM |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_QCOM_IPQ4019_USB |
| tristate "Qualcomm IPQ4019 USB PHY driver" |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. |
| |
| config PHY_QCOM_IPQ806X_SATA |
| tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" |
| depends on ARCH_QCOM |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_QCOM_PCIE2 |
| tristate "Qualcomm PCIe Gen2 PHY Driver" |
| depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Enable this to support the Qualcomm PCIe PHY, used with the Synopsys |
| based PCIe controller. |
| |
| config PHY_QCOM_QMP |
| tristate "Qualcomm QMP PHY Driver" |
| depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Enable this to support the QMP PHY transceiver that is used |
| with controllers such as PCIe, UFS, and USB on Qualcomm chips. |
| |
| config PHY_QCOM_QUSB2 |
| tristate "Qualcomm QUSB2 PHY Driver" |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| depends on NVMEM || !NVMEM |
| select GENERIC_PHY |
| help |
| Enable this to support the HighSpeed QUSB2 PHY transceiver for USB |
| controllers on Qualcomm chips. This driver supports the high-speed |
| PHY which is usually paired with either the ChipIdea or Synopsys DWC3 |
| USB IPs on MSM SOCs. |
| |
| config PHY_QCOM_USB_HS |
| tristate "Qualcomm USB HS PHY module" |
| depends on USB_ULPI_BUS |
| depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in |
| select GENERIC_PHY |
| help |
| Support for the USB high-speed ULPI compliant phy on Qualcomm |
| chipsets. |
| |
| config PHY_QCOM_USB_SNPS_FEMTO_V2 |
| tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Enable support for the USB high-speed SNPS Femto phy on Qualcomm |
| chipsets. This PHY has differences in the register map compared |
| to the V1 variants. The PHY is paired with a Synopsys DWC3 USB |
| controller on Qualcomm SOCs. |
| |
| config PHY_QCOM_USB_HSIC |
| tristate "Qualcomm USB HSIC ULPI PHY module" |
| depends on USB_ULPI_BUS |
| select GENERIC_PHY |
| help |
| Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. |
| |
| config PHY_QCOM_USB_HS_28NM |
| tristate "Qualcomm 28nm High-Speed PHY" |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in |
| select GENERIC_PHY |
| help |
| Enable this to support the Qualcomm Synopsys DesignWare Core 28nm |
| High-Speed PHY driver. This driver supports the Hi-Speed PHY which |
| is usually paired with either the ChipIdea or Synopsys DWC3 USB |
| IPs on MSM SOCs. |
| |
| config PHY_QCOM_USB_SS |
| tristate "Qualcomm USB Super-Speed PHY driver" |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in |
| select GENERIC_PHY |
| help |
| Enable this to support the Super-Speed USB transceiver on various |
| Qualcomm chipsets. |
| |
| config PHY_QCOM_IPQ806X_USB |
| tristate "Qualcomm IPQ806x DWC3 USB PHY driver" |
| depends on HAS_IOMEM |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| This option enables support for the Synopsis PHYs present inside the |
| Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports |
| both HS and SS PHY controllers. |
