| #ifndef DEF_RDMA_VT_H |
| #define DEF_RDMA_VT_H |
| |
| /* |
| * Copyright(c) 2016 - 2018 Intel Corporation. |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * BSD LICENSE |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| /* |
| * Structure that low level drivers will populate in order to register with the |
| * rdmavt layer. |
| */ |
| |
| #include <linux/spinlock.h> |
| #include <linux/list.h> |
| #include <linux/hash.h> |
| #include <rdma/ib_verbs.h> |
| #include <rdma/ib_mad.h> |
| #include <rdma/rdmavt_mr.h> |
| #include <rdma/rdmavt_qp.h> |
| |
| #define RVT_MAX_PKEY_VALUES 16 |
| |
| #define RVT_MAX_TRAP_LEN 100 /* Limit pending trap list */ |
| #define RVT_MAX_TRAP_LISTS 5 /*((IB_NOTICE_TYPE_INFO & 0x0F) + 1)*/ |
| #define RVT_TRAP_TIMEOUT 4096 /* 4.096 usec */ |
| |
| struct trap_list { |
| u32 list_len; |
| struct list_head list; |
| }; |
| |
| struct rvt_ibport { |
| struct rvt_qp __rcu *qp[2]; |
| struct ib_mad_agent *send_agent; /* agent for SMI (traps) */ |
| struct rb_root mcast_tree; |
| spinlock_t lock; /* protect changes in this struct */ |
| |
| /* non-zero when timer is set */ |
| unsigned long mkey_lease_timeout; |
| unsigned long trap_timeout; |
| __be64 gid_prefix; /* in network order */ |
| __be64 mkey; |
| u64 tid; |
| u32 port_cap_flags; |
| u16 port_cap3_flags; |
| u32 pma_sample_start; |
| u32 pma_sample_interval; |
| __be16 pma_counter_select[5]; |
| u16 pma_tag; |
| u16 mkey_lease_period; |
| u32 sm_lid; |
| u8 sm_sl; |
| u8 mkeyprot; |
| u8 subnet_timeout; |
| u8 vl_high_limit; |
| |
| /* |
| * Driver is expected to keep these up to date. These |
| * counters are informational only and not required to be |
| * completely accurate. |
| */ |
| u64 n_rc_resends; |
| u64 n_seq_naks; |
| u64 n_rdma_seq; |
| u64 n_rnr_naks; |
| u64 n_other_naks; |
| u64 n_loop_pkts; |
| u64 n_pkt_drops; |
| u64 n_vl15_dropped; |
| u64 n_rc_timeouts; |
| u64 n_dmawait; |
| u64 n_unaligned; |
| u64 n_rc_dupreq; |
| u64 n_rc_seqnak; |
| u16 pkey_violations; |
| u16 qkey_violations; |
| u16 mkey_violations; |
| |
| /* Hot-path per CPU counters to avoid cacheline trading to update */ |
| u64 z_rc_acks; |
| u64 z_rc_qacks; |
| u64 z_rc_delayed_comp; |
| u64 __percpu *rc_acks; |
| u64 __percpu *rc_qacks; |
| u64 __percpu *rc_delayed_comp; |
| |
| void *priv; /* driver private data */ |
| |
| /* |
| * The pkey table is allocated and maintained by the driver. Drivers |
| * need to have access to this before registering with rdmav. However |
| * rdmavt will need access to it so drivers need to proviee this during |
| * the attach port API call. |
| */ |
| u16 *pkey_table; |
| |
| struct rvt_ah *sm_ah; |
| |
| /* |
| * Keep a list of traps that have not been repressed. They will be |
| * resent based on trap_timer. |
| */ |
| struct trap_list trap_lists[RVT_MAX_TRAP_LISTS]; |
| struct timer_list trap_timer; |
| }; |
| |
| #define RVT_CQN_MAX 16 /* maximum length of cq name */ |
| |
| #define RVT_SGE_COPY_MEMCPY 0 |
| #define RVT_SGE_COPY_CACHELESS 1 |
| #define RVT_SGE_COPY_ADAPTIVE 2 |
| |
| /* |
| * Things that are driver specific, module parameters in hfi1 and qib |
| */ |
| struct rvt_driver_params { |
| struct ib_device_attr props; |
| |
| /* |
| * Anything driver specific that is not covered by props |
| * For instance special module parameters. Goes here. |
| */ |
| unsigned int lkey_table_size; |
| unsigned int qp_table_size; |
| unsigned int sge_copy_mode; |
| unsigned int wss_threshold; |
| unsigned int wss_clean_period; |
| int qpn_start; |
| int qpn_inc; |
| int qpn_res_start; |
| int qpn_res_end; |
| int nports; |
| int npkeys; |
| int node; |
| int psn_mask; |
| int psn_shift; |
| int psn_modify_mask; |
| u32 core_cap_flags; |
| u32 max_mad_size; |
| u8 qos_shift; |
| u8 max_rdma_atomic; |
| u8 reserved_operations; |
| }; |
| |
| /* Protection domain */ |
| struct rvt_pd { |
| struct ib_pd ibpd; |
| bool user; |
| }; |
| |
| /* Address handle */ |
| struct rvt_ah { |
| struct ib_ah ibah; |
| struct rdma_ah_attr attr; |
| atomic_t refcount; |
| u8 vl; |
| u8 log_pmtu; |
| }; |
| |
| /* memory working set size */ |
| struct rvt_wss { |
| unsigned long *entries; |
| atomic_t total_count; |
| atomic_t clean_counter; |
| atomic_t clean_entry; |
| |
| int threshold; |
| int num_entries; |
| long pages_mask; |
| unsigned int clean_period; |
| }; |
| |
| struct rvt_dev_info; |
| struct rvt_swqe; |
| struct rvt_driver_provided { |
| /* |
| * Which functions are required depends on which verbs rdmavt is |
| * providing and which verbs the driver is overriding. See |
| * check_support() for details. |
| */ |
| |
| /* hot path calldowns in a single cacheline */ |
| |
| /* |
| * Give the driver a notice that there is send work to do. It is up to |
| * the driver to generally push the packets out, this just queues the |
| * work with the driver. There are two variants here. The no_lock |
| * version requires the s_lock not to be held. The other assumes the |
| * s_lock is held. |
| */ |
| bool (*schedule_send)(struct rvt_qp *qp); |
| bool (*schedule_send_no_lock)(struct rvt_qp *qp); |
| |
| /* |
| * Driver specific work request setup and checking. |
| * This function is allowed to perform any setup, checks, or |
| * adjustments required to the SWQE in order to be usable by |
| * underlying protocols. This includes private data structure |
| * allocations. |
| */ |
| int (*setup_wqe)(struct rvt_qp *qp, struct rvt_swqe *wqe, |
| bool *call_send); |
| |
| /* |
| * Sometimes rdmavt needs to kick the driver's send progress. That is |
| * done by this call back. |
| */ |
| void (*do_send)(struct rvt_qp *qp); |
| |
| /* Passed to ib core registration. Callback to create syfs files */ |
| int (*port_callback)(struct ib_device *, u8, struct kobject *); |
| |
| /* |
| * Returns a pointer to the undelying hardware's PCI device. This is |
| * used to display information as to what hardware is being referenced |
| * in an output message |
| */ |
| struct pci_dev * (*get_pci_dev)(struct rvt_dev_info *rdi); |
| |
| /* |
| * Allocate a private queue pair data structure for driver specific |
| * information which is opaque to rdmavt. Errors are returned via |
| * ERR_PTR(err). The driver is free to return NULL or a valid |
| * pointer. |
| */ |
| void * (*qp_priv_alloc)(struct rvt_dev_info *rdi, struct rvt_qp *qp); |
| |
| /* |
| * Free the driver's private qp structure. |
| */ |
| void (*qp_priv_free)(struct rvt_dev_info *rdi, struct rvt_qp *qp); |
| |
| /* |
| * Inform the driver the particular qp in quesiton has been reset so |
| * that it can clean up anything it needs to. |
| */ |
| void (*notify_qp_reset)(struct rvt_qp *qp); |
| |
| /* |
| * Get a path mtu from the driver based on qp attributes. |
| */ |
| int (*get_pmtu_from_attr)(struct rvt_dev_info *rdi, struct rvt_qp *qp, |
| struct ib_qp_attr *attr); |
| |
| /* |
| * Notify driver that it needs to flush any outstanding IO requests that |
| * are waiting on a qp. |
| */ |
| void (*flush_qp_waiters)(struct rvt_qp *qp); |
| |
| /* |
| * Notify driver to stop its queue of sending packets. Nothing else |
| * should be posted to the queue pair after this has been called. |
| */ |
| void (*stop_send_queue)(struct rvt_qp *qp); |
| |
| /* |
| * Have the drivr drain any in progress operations |
| */ |
| void (*quiesce_qp)(struct rvt_qp *qp); |
| |
| /* |
| * Inform the driver a qp has went to error state. |
| */ |
| void (*notify_error_qp)(struct rvt_qp *qp); |
| |
| /* |
| * Get an MTU for a qp. |
| */ |
| u32 (*mtu_from_qp)(struct rvt_dev_info *rdi, struct rvt_qp *qp, |
| u32 pmtu); |
| /* |
| * Convert an mtu to a path mtu |
| */ |
| int (*mtu_to_path_mtu)(u32 mtu); |
| |
| /* |
| * Get the guid of a port in big endian byte order |
| */ |
| int (*get_guid_be)(struct rvt_dev_info *rdi, struct rvt_ibport *rvp, |
| int guid_index, __be64 *guid); |
| |
| /* |
| * Query driver for the state of the port. |
| */ |
| int (*query_port_state)(struct rvt_dev_info *rdi, u8 port_num, |
| struct ib_port_attr *props); |
| |
| /* |
| * Tell driver to shutdown a port |
| */ |
| int (*shut_down_port)(struct rvt_dev_info *rdi, u8 port_num); |
| |
| /* Tell driver to send a trap for changed port capabilities */ |
| void (*cap_mask_chg)(struct rvt_dev_info *rdi, u8 port_num); |
| |
| /* |
| * The following functions can be safely ignored completely. Any use of |
| * these is checked for NULL before blindly calling. Rdmavt should also |
| * be functional if drivers omit these. |
| */ |
| |
| /* Called to inform the driver that all qps should now be freed. */ |
| unsigned (*free_all_qps)(struct rvt_dev_info *rdi); |
| |
| /* Driver specific AH validation */ |
| int (*check_ah)(struct ib_device *, struct rdma_ah_attr *); |
| |
| /* Inform the driver a new AH has been created */ |
| void (*notify_new_ah)(struct ib_device *, struct rdma_ah_attr *, |
| struct rvt_ah *); |
| |
| /* Let the driver pick the next queue pair number*/ |
| int (*alloc_qpn)(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt, |
| enum ib_qp_type type, u8 port_num); |
| |
| /* Determine if its safe or allowed to modify the qp */ |
| int (*check_modify_qp)(struct rvt_qp *qp, struct ib_qp_attr *attr, |
| int attr_mask, struct ib_udata *udata); |
| |
| /* Driver specific QP modification/notification-of */ |
| void (*modify_qp)(struct rvt_qp *qp, struct ib_qp_attr *attr, |
| int attr_mask, struct ib_udata *udata); |
| |
| /* Notify driver a mad agent has been created */ |
| void (*notify_create_mad_agent)(struct rvt_dev_info *rdi, int port_idx); |
| |
| /* Notify driver a mad agent has been removed */ |
| void (*notify_free_mad_agent)(struct rvt_dev_info *rdi, int port_idx); |
| |
| /* Notify driver to restart rc */ |
| void (*notify_restart_rc)(struct rvt_qp *qp, u32 psn, int wait); |
| |
| /* Get and return CPU to pin CQ processing thread */ |
| int (*comp_vect_cpu_lookup)(struct rvt_dev_info *rdi, int comp_vect); |
| }; |
| |
| struct rvt_dev_info { |
| struct ib_device ibdev; /* Keep this first. Nothing above here */ |
| |
| /* |
| * Prior to calling for registration the driver will be responsible for |
| * allocating space for this structure. |
| * |
| * The driver will also be responsible for filling in certain members of |
| * dparms.props. The driver needs to fill in dparms exactly as it would |
| * want values reported to a ULP. This will be returned to the caller |
| * in rdmavt's device. The driver should also therefore refrain from |
| * modifying this directly after registration with rdmavt. |
| */ |
| |
| /* Driver specific properties */ |
| struct rvt_driver_params dparms; |
| |
| /* post send table */ |
| const struct rvt_operation_params *post_parms; |
| |
| /* opcode translation table */ |
| const enum ib_wc_opcode *wc_opcode; |
| |
| /* Driver specific helper functions */ |
| struct rvt_driver_provided driver_f; |
| |
| struct rvt_mregion __rcu *dma_mr; |
| struct rvt_lkey_table lkey_table; |
| |
| /* Internal use */ |
| int n_pds_allocated; |
| spinlock_t n_pds_lock; /* Protect pd allocated count */ |
| |
| int n_ahs_allocated; |
| spinlock_t n_ahs_lock; /* Protect ah allocated count */ |
| |
| u32 n_srqs_allocated; |
| spinlock_t n_srqs_lock; /* Protect srqs allocated count */ |
| |
| int flags; |
| struct rvt_ibport **ports; |
| |
| /* QP */ |
| struct rvt_qp_ibdev *qp_dev; |
| u32 n_qps_allocated; /* number of QPs allocated for device */ |
| u32 n_rc_qps; /* number of RC QPs allocated for device */ |
| u32 busy_jiffies; /* timeout scaling based on RC QP count */ |
| spinlock_t n_qps_lock; /* protect qps, rc qps and busy jiffy counts */ |
| |
| /* memory maps */ |
| struct list_head pending_mmaps; |
| spinlock_t mmap_offset_lock; /* protect mmap_offset */ |
| u32 mmap_offset; |
| spinlock_t pending_lock; /* protect pending mmap list */ |
| |
| /* CQ */ |
| u32 n_cqs_allocated; /* number of CQs allocated for device */ |
| spinlock_t n_cqs_lock; /* protect count of in use cqs */ |
| |
| /* Multicast */ |
| u32 n_mcast_grps_allocated; /* number of mcast groups allocated */ |
| spinlock_t n_mcast_grps_lock; |
| |
| /* Memory Working Set Size */ |
| struct rvt_wss *wss; |
| }; |
| |
| /** |
| * rvt_set_ibdev_name - Craft an IB device name from client info |
| * @rdi: pointer to the client rvt_dev_info structure |
| * @name: client specific name |
| * @unit: client specific unit number. |
| */ |
| static inline void rvt_set_ibdev_name(struct rvt_dev_info *rdi, |
| const char *fmt, const char *name, |
| const int unit) |
| { |
| /* |
| * FIXME: rvt and its users want to touch the ibdev before |
| * registration and have things like the name work. We don't have the |
| * infrastructure in the core to support this directly today, hack it |
| * to work by setting the name manually here. |
| */ |
| dev_set_name(&rdi->ibdev.dev, fmt, name, unit); |
| strlcpy(rdi->ibdev.name, dev_name(&rdi->ibdev.dev), IB_DEVICE_NAME_MAX); |
| } |
| |
| /** |
| * rvt_get_ibdev_name - return the IB name |
| * @rdi: rdmavt device |
| * |
| * Return the registered name of the device. |
| */ |
| static inline const char *rvt_get_ibdev_name(const struct rvt_dev_info *rdi) |
| { |
| return dev_name(&rdi->ibdev.dev); |
| } |
| |
| static inline struct rvt_pd *ibpd_to_rvtpd(struct ib_pd *ibpd) |
| { |
| return container_of(ibpd, struct rvt_pd, ibpd); |
| } |
| |
| static inline struct rvt_ah *ibah_to_rvtah(struct ib_ah *ibah) |
| { |
| return container_of(ibah, struct rvt_ah, ibah); |
| } |
| |
| static inline struct rvt_dev_info *ib_to_rvt(struct ib_device *ibdev) |
| { |
| return container_of(ibdev, struct rvt_dev_info, ibdev); |
| } |
| |
| static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq) |
| { |
| return container_of(ibsrq, struct rvt_srq, ibsrq); |
| } |
| |
| static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp) |
| { |
| return container_of(ibqp, struct rvt_qp, ibqp); |
| } |
| |
| static inline unsigned rvt_get_npkeys(struct rvt_dev_info *rdi) |
| { |
| /* |
| * All ports have same number of pkeys. |
| */ |
| return rdi->dparms.npkeys; |
| } |
| |
| /* |
| * Return the max atomic suitable for determining |
| * the size of the ack ring buffer in a QP. |
| */ |
| static inline unsigned int rvt_max_atomic(struct rvt_dev_info *rdi) |
| { |
| return rdi->dparms.max_rdma_atomic + 1; |
| } |
| |
| /* |
| * Return the indexed PKEY from the port PKEY table. |
| */ |
| static inline u16 rvt_get_pkey(struct rvt_dev_info *rdi, |
| int port_index, |
| unsigned index) |
| { |
| if (index >= rvt_get_npkeys(rdi)) |
| return 0; |
| else |
| return rdi->ports[port_index]->pkey_table[index]; |
| } |
| |
| /** |
| * rvt_lookup_qpn - return the QP with the given QPN |
| * @ibp: the ibport |
| * @qpn: the QP number to look up |
| * |
| * The caller must hold the rcu_read_lock(), and keep the lock until |
| * the returned qp is no longer in use. |
| */ |
| /* TODO: Remove this and put in rdmavt/qp.h when no longer needed by drivers */ |
| static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi, |
| struct rvt_ibport *rvp, |
| u32 qpn) __must_hold(RCU) |
| { |
| struct rvt_qp *qp = NULL; |
| |
| if (unlikely(qpn <= 1)) { |
| qp = rcu_dereference(rvp->qp[qpn]); |
| } else { |
| u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits); |
| |
| for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp; |
| qp = rcu_dereference(qp->next)) |
| if (qp->ibqp.qp_num == qpn) |
| break; |
| } |
| return qp; |
| } |
| |
| /** |
| * rvt_mod_retry_timer - mod a retry timer |
| * @qp - the QP |
| * Modify a potentially already running retry timer |
| */ |
| static inline void rvt_mod_retry_timer(struct rvt_qp *qp) |
| { |
| struct ib_qp *ibqp = &qp->ibqp; |
| struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device); |
| |
| lockdep_assert_held(&qp->s_lock); |
| qp->s_flags |= RVT_S_TIMER; |
| /* 4.096 usec. * (1 << qp->timeout) */ |
| mod_timer(&qp->s_timer, jiffies + qp->timeout_jiffies + |
| rdi->busy_jiffies); |
| } |
| |
| struct rvt_dev_info *rvt_alloc_device(size_t size, int nports); |
| void rvt_dealloc_device(struct rvt_dev_info *rdi); |
| int rvt_register_device(struct rvt_dev_info *rvd, u32 driver_id); |
| void rvt_unregister_device(struct rvt_dev_info *rvd); |
| int rvt_check_ah(struct ib_device *ibdev, struct rdma_ah_attr *ah_attr); |
| int rvt_init_port(struct rvt_dev_info *rdi, struct rvt_ibport *port, |
| int port_index, u16 *pkey_table); |
| int rvt_fast_reg_mr(struct rvt_qp *qp, struct ib_mr *ibmr, u32 key, |
| int access); |
| int rvt_invalidate_rkey(struct rvt_qp *qp, u32 rkey); |
| int rvt_rkey_ok(struct rvt_qp *qp, struct rvt_sge *sge, |
| u32 len, u64 vaddr, u32 rkey, int acc); |
| int rvt_lkey_ok(struct rvt_lkey_table *rkt, struct rvt_pd *pd, |
| struct rvt_sge *isge, struct rvt_sge *last_sge, |
| struct ib_sge *sge, int acc); |
| struct rvt_mcast *rvt_mcast_find(struct rvt_ibport *ibp, union ib_gid *mgid, |
| u16 lid); |
| |
| #endif /* DEF_RDMA_VT_H */ |