| /* ###################################################################### |
| |
| Octagon 5066 MTD Driver. |
| |
| The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It |
| comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that |
| is replacable by flash. Both units are mapped through a multiplexer |
| into a 32k memory window at 0xe8000. The control register for the |
| multiplexing unit is located at IO 0x208 with a bit map of |
| 0-5 Page Selection in 32k increments |
| 6-7 Device selection: |
| 00 SSD off |
| 01 SSD 0 (Socket) |
| 10 SSD 1 (Flash chip) |
| 11 undefined |
| |
| On each SSD, the first 128k is reserved for use by the bios |
| (actually it IS the bios..) This only matters if you are booting off the |
| flash, you must not put a file system starting there. |
| |
| The driver tries to do a detection algorithm to guess what sort of devices |
| are plugged into the sockets. |
| |
| ##################################################################### */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/mtd.h> |
| |
| #define WINDOW_START 0xe8000 |
| #define WINDOW_LENGTH 0x8000 |
| #define WINDOW_SHIFT 27 |
| #define WINDOW_MASK 0x7FFF |
| #define PAGE_IO 0x208 |
| |
| static volatile char page_n_dev = 0; |
| static unsigned long iomapadr; |
| static DEFINE_SPINLOCK(oct5066_spin); |
| |
| /* |
| * We use map_priv_1 to identify which device we are. |
| */ |
| |
| static void __oct5066_page(struct map_info *map, __u8 byte) |
| { |
| outb(byte,PAGE_IO); |
| page_n_dev = byte; |
| } |
| |
| static inline void oct5066_page(struct map_info *map, unsigned long ofs) |
| { |
| __u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT); |
| |
| if (page_n_dev != byte) |
| __oct5066_page(map, byte); |
| } |
| |
| |
| static map_word oct5066_read8(struct map_info *map, unsigned long ofs) |
| { |
| map_word ret; |
| spin_lock(&oct5066_spin); |
| oct5066_page(map, ofs); |
| ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK)); |
| spin_unlock(&oct5066_spin); |
| return ret; |
| } |
| |
| static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) |
| { |
| while(len) { |
| unsigned long thislen = len; |
| if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) |
| thislen = WINDOW_LENGTH-(from & WINDOW_MASK); |
| |
| spin_lock(&oct5066_spin); |
| oct5066_page(map, from); |
| memcpy_fromio(to, iomapadr + from, thislen); |
| spin_unlock(&oct5066_spin); |
| to += thislen; |
| from += thislen; |
| len -= thislen; |
| } |
| } |
| |
| static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr) |
| { |
| spin_lock(&oct5066_spin); |
| oct5066_page(map, adr); |
| writeb(d.x[0], iomapadr + (adr & WINDOW_MASK)); |
| spin_unlock(&oct5066_spin); |
| } |
| |
| static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) |
| { |
| while(len) { |
| unsigned long thislen = len; |
| if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) |
| thislen = WINDOW_LENGTH-(to & WINDOW_MASK); |
| |
| spin_lock(&oct5066_spin); |
| oct5066_page(map, to); |
| memcpy_toio(iomapadr + to, from, thislen); |
| spin_unlock(&oct5066_spin); |
| to += thislen; |
| from += thislen; |
| len -= thislen; |
| } |
| } |
| |
| static struct map_info oct5066_map[2] = { |
| { |
| .name = "Octagon 5066 Socket", |
| .phys = NO_XIP, |
| .size = 512 * 1024, |
| .bankwidth = 1, |
| .read = oct5066_read8, |
| .copy_from = oct5066_copy_from, |
| .write = oct5066_write8, |
| .copy_to = oct5066_copy_to, |
| .map_priv_1 = 1<<6 |
| }, |
| { |
| .name = "Octagon 5066 Internal Flash", |
| .phys = NO_XIP, |
| .size = 2 * 1024 * 1024, |
| .bankwidth = 1, |
| .read = oct5066_read8, |
| .copy_from = oct5066_copy_from, |
| .write = oct5066_write8, |
| .copy_to = oct5066_copy_to, |
| .map_priv_1 = 2<<6 |
| } |
| }; |
| |
| static struct mtd_info *oct5066_mtd[2] = {NULL, NULL}; |
| |
| // OctProbe - Sense if this is an octagon card |
| // --------------------------------------------------------------------- |
| /* Perform a simple validity test, we map the window select SSD0 and |
| change pages while monitoring the window. A change in the window, |
| controlled by the PAGE_IO port is a functioning 5066 board. This will |
| fail if the thing in the socket is set to a uniform value. */ |
| static int __init OctProbe(void) |
| { |
| unsigned int Base = (1 << 6); |
| unsigned long I; |
| unsigned long Values[10]; |
| for (I = 0; I != 20; I++) |
| { |
| outb(Base + (I%10),PAGE_IO); |
| if (I < 10) |
| { |
| // Record the value and check for uniqueness |
| Values[I%10] = readl(iomapadr); |
| if (I > 0 && Values[I%10] == Values[0]) |
| return -EAGAIN; |
| } |
| else |
| { |
| // Make sure we get the same values on the second pass |
| if (Values[I%10] != readl(iomapadr)) |
| return -EAGAIN; |
| } |
| } |
| return 0; |
| } |
| |
| void cleanup_oct5066(void) |
| { |
| int i; |
| for (i=0; i<2; i++) { |
| if (oct5066_mtd[i]) { |
| del_mtd_device(oct5066_mtd[i]); |
| map_destroy(oct5066_mtd[i]); |
| } |
| } |
| iounmap((void *)iomapadr); |
| release_region(PAGE_IO, 1); |
| } |
| |
| static int __init init_oct5066(void) |
| { |
| int i; |
| int ret = 0; |
| |
| // Do an autoprobe sequence |
| if (!request_region(PAGE_IO,1,"Octagon SSD")) { |
| printk(KERN_NOTICE "5066: Page Register in Use\n"); |
| return -EAGAIN; |
| } |
| iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH); |
| if (!iomapadr) { |
| printk(KERN_NOTICE "Failed to ioremap memory region\n"); |
| ret = -EIO; |
| goto out_rel; |
| } |
| if (OctProbe() != 0) { |
| printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n"); |
| iounmap((void *)iomapadr); |
| ret = -EAGAIN; |
| goto out_unmap; |
| } |
| |
| // Print out our little header.. |
| printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START, |
| WINDOW_START+WINDOW_LENGTH); |
| |
| for (i=0; i<2; i++) { |
| oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]); |
| if (!oct5066_mtd[i]) |
| oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]); |
| if (!oct5066_mtd[i]) |
| oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]); |
| if (!oct5066_mtd[i]) |
| oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]); |
| if (oct5066_mtd[i]) { |
| oct5066_mtd[i]->owner = THIS_MODULE; |
| add_mtd_device(oct5066_mtd[i]); |
| } |
| } |
| |
| if (!oct5066_mtd[0] && !oct5066_mtd[1]) { |
| cleanup_oct5066(); |
| return -ENXIO; |
| } |
| |
| return 0; |
| |
| out_unmap: |
| iounmap((void *)iomapadr); |
| out_rel: |
| release_region(PAGE_IO, 1); |
| return ret; |
| } |
| |
| module_init(init_oct5066); |
| module_exit(cleanup_oct5066); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com>, David Woodhouse <dwmw2@infradead.org>"); |
| MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer"); |