| /* src/prism2/driver/prism2mib.c |
| * |
| * Management request for mibset/mibget |
| * |
| * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. |
| * -------------------------------------------------------------------- |
| * |
| * linux-wlan |
| * |
| * The contents of this file are subject to the Mozilla Public |
| * License Version 1.1 (the "License"); you may not use this file |
| * except in compliance with the License. You may obtain a copy of |
| * the License at http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| * implied. See the License for the specific language governing |
| * rights and limitations under the License. |
| * |
| * Alternatively, the contents of this file may be used under the |
| * terms of the GNU Public License version 2 (the "GPL"), in which |
| * case the provisions of the GPL are applicable instead of the |
| * above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use |
| * your version of this file under the MPL, indicate your decision |
| * by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL. If you do not delete |
| * the provisions above, a recipient may use your version of this |
| * file under either the MPL or the GPL. |
| * |
| * -------------------------------------------------------------------- |
| * |
| * Inquiries regarding the linux-wlan Open Source project can be |
| * made directly to: |
| * |
| * AbsoluteValue Systems Inc. |
| * info@linux-wlan.com |
| * http://www.linux-wlan.com |
| * |
| * -------------------------------------------------------------------- |
| * |
| * Portions of the development of this software were funded by |
| * Intersil Corporation as part of PRISM(R) chipset product development. |
| * |
| * -------------------------------------------------------------------- |
| * |
| * The functions in this file handle the mibset/mibget management |
| * functions. |
| * |
| * -------------------------------------------------------------------- |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/wireless.h> |
| #include <linux/netdevice.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <asm/byteorder.h> |
| #include <linux/usb.h> |
| #include <linux/bitops.h> |
| |
| #include "p80211types.h" |
| #include "p80211hdr.h" |
| #include "p80211mgmt.h" |
| #include "p80211conv.h" |
| #include "p80211msg.h" |
| #include "p80211netdev.h" |
| #include "p80211metadef.h" |
| #include "p80211metastruct.h" |
| #include "hfa384x.h" |
| #include "prism2mgmt.h" |
| |
| #define MIB_TMP_MAXLEN 200 /* Max length of RID record (in bytes). */ |
| |
| #define F_STA 0x1 /* MIB is supported on stations. */ |
| #define F_READ 0x2 /* MIB may be read. */ |
| #define F_WRITE 0x4 /* MIB may be written. */ |
| |
| typedef struct mibrec { |
| u32 did; |
| u16 flag; |
| u16 parm1; |
| u16 parm2; |
| u16 parm3; |
| int (*func) (struct mibrec *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data); |
| } mibrec_t; |
| |
| static int prism2mib_bytearea2pstr(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data); |
| |
| static int prism2mib_uint32(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data); |
| |
| static int prism2mib_flag(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data); |
| |
| static int prism2mib_wepdefaultkey(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data); |
| |
| static int prism2mib_privacyinvoked(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data); |
| |
| static int prism2mib_excludeunencrypted(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data); |
| |
| static int prism2mib_fragmentationthreshold(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data); |
| |
| static int prism2mib_priv(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data); |
| |
| static mibrec_t mibtab[] = { |
| |
| /* dot11smt MIB's */ |
| {DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0, |
| F_STA | F_WRITE, |
| HFA384x_RID_CNFWEPDEFAULTKEY0, 0, 0, |
| prism2mib_wepdefaultkey}, |
| {DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1, |
| F_STA | F_WRITE, |
| HFA384x_RID_CNFWEPDEFAULTKEY1, 0, 0, |
| prism2mib_wepdefaultkey}, |
| {DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2, |
| F_STA | F_WRITE, |
| HFA384x_RID_CNFWEPDEFAULTKEY2, 0, 0, |
| prism2mib_wepdefaultkey}, |
| {DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3, |
| F_STA | F_WRITE, |
| HFA384x_RID_CNFWEPDEFAULTKEY3, 0, 0, |
| prism2mib_wepdefaultkey}, |
| {DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_CNFWEPFLAGS, HFA384x_WEPFLAGS_PRIVINVOKED, 0, |
| prism2mib_privacyinvoked}, |
| {DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_CNFWEPDEFAULTKEYID, 0, 0, |
| prism2mib_uint32}, |
| {DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_CNFWEPFLAGS, HFA384x_WEPFLAGS_EXCLUDE, 0, |
| prism2mib_excludeunencrypted}, |
| |
| /* dot11mac MIB's */ |
| |
| {DIDmib_dot11mac_dot11OperationTable_dot11MACAddress, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_CNFOWNMACADDR, HFA384x_RID_CNFOWNMACADDR_LEN, 0, |
| prism2mib_bytearea2pstr}, |
| {DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_RTSTHRESH, 0, 0, |
| prism2mib_uint32}, |
| {DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit, |
| F_STA | F_READ, |
| HFA384x_RID_SHORTRETRYLIMIT, 0, 0, |
| prism2mib_uint32}, |
| {DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit, |
| F_STA | F_READ, |
| HFA384x_RID_LONGRETRYLIMIT, 0, 0, |
| prism2mib_uint32}, |
| {DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_FRAGTHRESH, 0, 0, |
| prism2mib_fragmentationthreshold}, |
| {DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime, |
| F_STA | F_READ, |
| HFA384x_RID_MAXTXLIFETIME, 0, 0, |
| prism2mib_uint32}, |
| |
| /* dot11phy MIB's */ |
| |
| {DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel, |
| F_STA | F_READ, |
| HFA384x_RID_CURRENTCHANNEL, 0, 0, |
| prism2mib_uint32}, |
| {DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_TXPOWERMAX, 0, 0, |
| prism2mib_uint32}, |
| |
| /* p2Static MIB's */ |
| |
| {DIDmib_p2_p2Static_p2CnfPortType, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_CNFPORTTYPE, 0, 0, |
| prism2mib_uint32}, |
| |
| /* p2MAC MIB's */ |
| |
| {DIDmib_p2_p2MAC_p2CurrentTxRate, |
| F_STA | F_READ, |
| HFA384x_RID_CURRENTTXRATE, 0, 0, |
| prism2mib_uint32}, |
| |
| /* And finally, lnx mibs */ |
| {DIDmib_lnx_lnxConfigTable_lnxRSNAIE, |
| F_STA | F_READ | F_WRITE, |
| HFA384x_RID_CNFWPADATA, 0, 0, |
| prism2mib_priv}, |
| {0, 0, 0, 0, 0, NULL} |
| }; |
| |
| /*---------------------------------------------------------------- |
| * prism2mgmt_mibset_mibget |
| * |
| * Set the value of a mib item. |
| * |
| * Arguments: |
| * wlandev wlan device structure |
| * msgp ptr to msg buffer |
| * |
| * Returns: |
| * 0 success and done |
| * <0 success, but we're waiting for something to finish. |
| * >0 an error occurred while handling the message. |
| * Side effects: |
| * |
| * Call context: |
| * process thread (usually) |
| * interrupt |
| ----------------------------------------------------------------*/ |
| |
| int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp) |
| { |
| hfa384x_t *hw = wlandev->priv; |
| int result, isget; |
| mibrec_t *mib; |
| |
| u16 which; |
| |
| p80211msg_dot11req_mibset_t *msg = msgp; |
| p80211itemd_t *mibitem; |
| |
| msg->resultcode.status = P80211ENUM_msgitem_status_data_ok; |
| msg->resultcode.data = P80211ENUM_resultcode_success; |
| |
| /* |
| ** Determine if this is an Access Point or a station. |
| */ |
| |
| which = F_STA; |
| |
| /* |
| ** Find the MIB in the MIB table. Note that a MIB may be in the |
| ** table twice...once for an AP and once for a station. Make sure |
| ** to get the correct one. Note that DID=0 marks the end of the |
| ** MIB table. |
| */ |
| |
| mibitem = (p80211itemd_t *) msg->mibattribute.data; |
| |
| for (mib = mibtab; mib->did != 0; mib++) |
| if (mib->did == mibitem->did && (mib->flag & which)) |
| break; |
| |
| if (mib->did == 0) { |
| msg->resultcode.data = P80211ENUM_resultcode_not_supported; |
| goto done; |
| } |
| |
| /* |
| ** Determine if this is a "mibget" or a "mibset". If this is a |
| ** "mibget", then make sure that the MIB may be read. Otherwise, |
| ** this is a "mibset" so make make sure that the MIB may be written. |
| */ |
| |
| isget = (msg->msgcode == DIDmsg_dot11req_mibget); |
| |
| if (isget) { |
| if (!(mib->flag & F_READ)) { |
| msg->resultcode.data = |
| P80211ENUM_resultcode_cant_get_writeonly_mib; |
| goto done; |
| } |
| } else { |
| if (!(mib->flag & F_WRITE)) { |
| msg->resultcode.data = |
| P80211ENUM_resultcode_cant_set_readonly_mib; |
| goto done; |
| } |
| } |
| |
| /* |
| ** Execute the MIB function. If things worked okay, then make |
| ** sure that the MIB function also worked okay. If so, and this |
| ** is a "mibget", then the status value must be set for both the |
| ** "mibattribute" parameter and the mib item within the data |
| ** portion of the "mibattribute". |
| */ |
| |
| result = mib->func(mib, isget, wlandev, hw, msg, (void *)mibitem->data); |
| |
| if (msg->resultcode.data == P80211ENUM_resultcode_success) { |
| if (result != 0) { |
| pr_debug("get/set failure, result=%d\n", |
| result); |
| msg->resultcode.data = |
| P80211ENUM_resultcode_implementation_failure; |
| } else { |
| if (isget) { |
| msg->mibattribute.status = |
| P80211ENUM_msgitem_status_data_ok; |
| mibitem->status = |
| P80211ENUM_msgitem_status_data_ok; |
| } |
| } |
| } |
| |
| done: |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_bytearea2pstr |
| * |
| * Get/set pstr data to/from a byte area. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Number of bytes of RID data. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_bytearea2pstr(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data) |
| { |
| int result; |
| p80211pstrd_t *pstr = (p80211pstrd_t *) data; |
| u8 bytebuf[MIB_TMP_MAXLEN]; |
| |
| if (isget) { |
| result = |
| hfa384x_drvr_getconfig(hw, mib->parm1, bytebuf, mib->parm2); |
| prism2mgmt_bytearea2pstr(bytebuf, pstr, mib->parm2); |
| } else { |
| memset(bytebuf, 0, mib->parm2); |
| prism2mgmt_pstr2bytearea(bytebuf, pstr); |
| result = |
| hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, mib->parm2); |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_uint32 |
| * |
| * Get/set uint32 data. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Not used. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_uint32(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data) |
| { |
| int result; |
| u32 *uint32 = (u32 *) data; |
| u8 bytebuf[MIB_TMP_MAXLEN]; |
| u16 *wordbuf = (u16 *) bytebuf; |
| |
| if (isget) { |
| result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf); |
| *uint32 = *wordbuf; |
| } else { |
| *wordbuf = *uint32; |
| result = hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf); |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_flag |
| * |
| * Get/set a flag. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Bit to get/set. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_flag(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data) |
| { |
| int result; |
| u32 *uint32 = (u32 *) data; |
| u8 bytebuf[MIB_TMP_MAXLEN]; |
| u16 *wordbuf = (u16 *) bytebuf; |
| u32 flags; |
| |
| result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf); |
| if (result == 0) { |
| flags = *wordbuf; |
| if (isget) { |
| *uint32 = (flags & mib->parm2) ? |
| P80211ENUM_truth_true : P80211ENUM_truth_false; |
| } else { |
| if ((*uint32) == P80211ENUM_truth_true) |
| flags |= mib->parm2; |
| else |
| flags &= ~mib->parm2; |
| *wordbuf = flags; |
| result = |
| hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf); |
| } |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_wepdefaultkey |
| * |
| * Get/set WEP default keys. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Number of bytes of RID data. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_wepdefaultkey(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data) |
| { |
| int result; |
| p80211pstrd_t *pstr = (p80211pstrd_t *) data; |
| u8 bytebuf[MIB_TMP_MAXLEN]; |
| u16 len; |
| |
| if (isget) { |
| result = 0; /* Should never happen. */ |
| } else { |
| len = (pstr->len > 5) ? HFA384x_RID_CNFWEP128DEFAULTKEY_LEN : |
| HFA384x_RID_CNFWEPDEFAULTKEY_LEN; |
| memset(bytebuf, 0, len); |
| prism2mgmt_pstr2bytearea(bytebuf, pstr); |
| result = hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, len); |
| } |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_privacyinvoked |
| * |
| * Get/set the dot11PrivacyInvoked value. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Bit value for PrivacyInvoked flag. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_privacyinvoked(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data) |
| { |
| int result; |
| |
| if (wlandev->hostwep & HOSTWEP_DECRYPT) { |
| if (wlandev->hostwep & HOSTWEP_DECRYPT) |
| mib->parm2 |= HFA384x_WEPFLAGS_DISABLE_RXCRYPT; |
| if (wlandev->hostwep & HOSTWEP_ENCRYPT) |
| mib->parm2 |= HFA384x_WEPFLAGS_DISABLE_TXCRYPT; |
| } |
| |
| result = prism2mib_flag(mib, isget, wlandev, hw, msg, data); |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_excludeunencrypted |
| * |
| * Get/set the dot11ExcludeUnencrypted value. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Bit value for ExcludeUnencrypted flag. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_excludeunencrypted(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data) |
| { |
| int result; |
| |
| result = prism2mib_flag(mib, isget, wlandev, hw, msg, data); |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_fragmentationthreshold |
| * |
| * Get/set the fragmentation threshold. |
| * |
| * MIB record parameters: |
| * parm1 Prism2 RID value. |
| * parm2 Not used. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_fragmentationthreshold(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, |
| void *data) |
| { |
| int result; |
| u32 *uint32 = (u32 *) data; |
| |
| if (!isget) |
| if ((*uint32) % 2) { |
| printk(KERN_WARNING "Attempt to set odd number " |
| "FragmentationThreshold\n"); |
| msg->resultcode.data = |
| P80211ENUM_resultcode_not_supported; |
| return 0; |
| } |
| |
| result = prism2mib_uint32(mib, isget, wlandev, hw, msg, data); |
| |
| return result; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mib_priv |
| * |
| * Get/set values in the "priv" data structure. |
| * |
| * MIB record parameters: |
| * parm1 Not used. |
| * parm2 Not used. |
| * parm3 Not used. |
| * |
| * Arguments: |
| * mib MIB record. |
| * isget MIBGET/MIBSET flag. |
| * wlandev wlan device structure. |
| * priv "priv" structure. |
| * hw "hw" structure. |
| * msg Message structure. |
| * data Data buffer. |
| * |
| * Returns: |
| * 0 - Success. |
| * ~0 - Error. |
| * |
| ----------------------------------------------------------------*/ |
| |
| static int prism2mib_priv(mibrec_t *mib, |
| int isget, |
| wlandevice_t *wlandev, |
| hfa384x_t *hw, |
| p80211msg_dot11req_mibset_t *msg, void *data) |
| { |
| p80211pstrd_t *pstr = (p80211pstrd_t *) data; |
| |
| int result; |
| |
| switch (mib->did) { |
| case DIDmib_lnx_lnxConfigTable_lnxRSNAIE:{ |
| hfa384x_WPAData_t wpa; |
| if (isget) { |
| hfa384x_drvr_getconfig(hw, |
| HFA384x_RID_CNFWPADATA, |
| (u8 *)&wpa, |
| sizeof(wpa)); |
| pstr->len = le16_to_cpu(wpa.datalen); |
| memcpy(pstr->data, wpa.data, pstr->len); |
| } else { |
| wpa.datalen = cpu_to_le16(pstr->len); |
| memcpy(wpa.data, pstr->data, pstr->len); |
| |
| result = |
| hfa384x_drvr_setconfig(hw, |
| HFA384x_RID_CNFWPADATA, |
| (u8 *)&wpa, |
| sizeof(wpa)); |
| } |
| break; |
| } |
| default: |
| printk(KERN_ERR "Unhandled DID 0x%08x\n", mib->did); |
| } |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mgmt_pstr2bytestr |
| * |
| * Convert the pstr data in the WLAN message structure into an hfa384x |
| * byte string format. |
| * |
| * Arguments: |
| * bytestr hfa384x byte string data type |
| * pstr wlan message data |
| * |
| * Returns: |
| * Nothing |
| * |
| ----------------------------------------------------------------*/ |
| |
| void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr) |
| { |
| bytestr->len = cpu_to_le16((u16) (pstr->len)); |
| memcpy(bytestr->data, pstr->data, pstr->len); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mgmt_pstr2bytearea |
| * |
| * Convert the pstr data in the WLAN message structure into an hfa384x |
| * byte area format. |
| * |
| * Arguments: |
| * bytearea hfa384x byte area data type |
| * pstr wlan message data |
| * |
| * Returns: |
| * Nothing |
| * |
| ----------------------------------------------------------------*/ |
| |
| void prism2mgmt_pstr2bytearea(u8 *bytearea, p80211pstrd_t *pstr) |
| { |
| memcpy(bytearea, pstr->data, pstr->len); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mgmt_bytestr2pstr |
| * |
| * Convert the data in an hfa384x byte string format into a |
| * pstr in the WLAN message. |
| * |
| * Arguments: |
| * bytestr hfa384x byte string data type |
| * msg wlan message |
| * |
| * Returns: |
| * Nothing |
| * |
| ----------------------------------------------------------------*/ |
| |
| void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr) |
| { |
| pstr->len = (u8) (le16_to_cpu((u16) (bytestr->len))); |
| memcpy(pstr->data, bytestr->data, pstr->len); |
| } |
| |
| /*---------------------------------------------------------------- |
| * prism2mgmt_bytearea2pstr |
| * |
| * Convert the data in an hfa384x byte area format into a pstr |
| * in the WLAN message. |
| * |
| * Arguments: |
| * bytearea hfa384x byte area data type |
| * msg wlan message |
| * |
| * Returns: |
| * Nothing |
| * |
| ----------------------------------------------------------------*/ |
| |
| void prism2mgmt_bytearea2pstr(u8 *bytearea, p80211pstrd_t *pstr, int len) |
| { |
| pstr->len = (u8) len; |
| memcpy(pstr->data, bytearea, len); |
| } |
| |
| |
| |
| |
| |