| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Core of the accelerated CRC algorithm. |
| * In your file, define the constants and CRC_FUNCTION_NAME |
| * Then include this file. |
| * |
| * Calculate the checksum of data that is 16 byte aligned and a multiple of |
| * 16 bytes. |
| * |
| * The first step is to reduce it to 1024 bits. We do this in 8 parallel |
| * chunks in order to mask the latency of the vpmsum instructions. If we |
| * have more than 32 kB of data to checksum we repeat this step multiple |
| * times, passing in the previous 1024 bits. |
| * |
| * The next step is to reduce the 1024 bits to 64 bits. This step adds |
| * 32 bits of 0s to the end - this matches what a CRC does. We just |
| * calculate constants that land the data in this 32 bits. |
| * |
| * We then use fixed point Barrett reduction to compute a mod n over GF(2) |
| * for n = CRC using POWER8 instructions. We use x = 32. |
| * |
| * http://en.wikipedia.org/wiki/Barrett_reduction |
| * |
| * Copyright (C) 2015 Anton Blanchard <anton@au.ibm.com>, IBM |
| */ |
| |
| #include <asm/ppc_asm.h> |
| #include <asm/ppc-opcode.h> |
| |
| #define MAX_SIZE 32768 |
| |
| .text |
| |
| #if defined(__BIG_ENDIAN__) && defined(REFLECT) |
| #define BYTESWAP_DATA |
| #elif defined(__LITTLE_ENDIAN__) && !defined(REFLECT) |
| #define BYTESWAP_DATA |
| #else |
| #undef BYTESWAP_DATA |
| #endif |
| |
| #define off16 r25 |
| #define off32 r26 |
| #define off48 r27 |
| #define off64 r28 |
| #define off80 r29 |
| #define off96 r30 |
| #define off112 r31 |
| |
| #define const1 v24 |
| #define const2 v25 |
| |
| #define byteswap v26 |
| #define mask_32bit v27 |
| #define mask_64bit v28 |
| #define zeroes v29 |
| |
| #ifdef BYTESWAP_DATA |
| #define VPERM(A, B, C, D) vperm A, B, C, D |
| #else |
| #define VPERM(A, B, C, D) |
| #endif |
| |
| /* unsigned int CRC_FUNCTION_NAME(unsigned int crc, void *p, unsigned long len) */ |
| FUNC_START(CRC_FUNCTION_NAME) |
| std r31,-8(r1) |
| std r30,-16(r1) |
| std r29,-24(r1) |
| std r28,-32(r1) |
| std r27,-40(r1) |
| std r26,-48(r1) |
| std r25,-56(r1) |
| |
| li off16,16 |
| li off32,32 |
| li off48,48 |
| li off64,64 |
| li off80,80 |
| li off96,96 |
| li off112,112 |
| li r0,0 |
| |
| /* Enough room for saving 10 non volatile VMX registers */ |
| subi r6,r1,56+10*16 |
| subi r7,r1,56+2*16 |
| |
| stvx v20,0,r6 |
| stvx v21,off16,r6 |
| stvx v22,off32,r6 |
| stvx v23,off48,r6 |
| stvx v24,off64,r6 |
| stvx v25,off80,r6 |
| stvx v26,off96,r6 |
| stvx v27,off112,r6 |
| stvx v28,0,r7 |
| stvx v29,off16,r7 |
| |
| mr r10,r3 |
| |
| vxor zeroes,zeroes,zeroes |
| vspltisw v0,-1 |
| |
| vsldoi mask_32bit,zeroes,v0,4 |
| vsldoi mask_64bit,zeroes,v0,8 |
| |
| /* Get the initial value into v8 */ |
| vxor v8,v8,v8 |
| MTVRD(v8, R3) |
| #ifdef REFLECT |
| vsldoi v8,zeroes,v8,8 /* shift into bottom 32 bits */ |
| #else |
| vsldoi v8,v8,zeroes,4 /* shift into top 32 bits */ |
| #endif |
| |
| #ifdef BYTESWAP_DATA |
| addis r3,r2,.byteswap_constant@toc@ha |
| addi r3,r3,.byteswap_constant@toc@l |
| |
| lvx byteswap,0,r3 |
| addi r3,r3,16 |
| #endif |
| |
| cmpdi r5,256 |
| blt .Lshort |
| |
| rldicr r6,r5,0,56 |
| |
| /* Checksum in blocks of MAX_SIZE */ |
| 1: lis r7,MAX_SIZE@h |
| ori r7,r7,MAX_SIZE@l |
| mr r9,r7 |
| cmpd r6,r7 |
| bgt 2f |
| mr r7,r6 |
| 2: subf r6,r7,r6 |
| |
| /* our main loop does 128 bytes at a time */ |
| srdi r7,r7,7 |
| |
| /* |
| * Work out the offset into the constants table to start at. Each |
| * constant is 16 bytes, and it is used against 128 bytes of input |
| * data - 128 / 16 = 8 |
| */ |
| sldi r8,r7,4 |
| srdi r9,r9,3 |
| subf r8,r8,r9 |
| |
| /* We reduce our final 128 bytes in a separate step */ |
| addi r7,r7,-1 |
| mtctr r7 |
| |
| addis r3,r2,.constants@toc@ha |
| addi r3,r3,.constants@toc@l |
| |
| /* Find the start of our constants */ |
| add r3,r3,r8 |
| |
| /* zero v0-v7 which will contain our checksums */ |
| vxor v0,v0,v0 |
| vxor v1,v1,v1 |
| vxor v2,v2,v2 |
| vxor v3,v3,v3 |
| vxor v4,v4,v4 |
| vxor v5,v5,v5 |
| vxor v6,v6,v6 |
| vxor v7,v7,v7 |
| |
| lvx const1,0,r3 |
| |
| /* |
| * If we are looping back to consume more data we use the values |
| * already in v16-v23. |
| */ |
| cmpdi r0,1 |
| beq 2f |
| |
| /* First warm up pass */ |
| lvx v16,0,r4 |
| lvx v17,off16,r4 |
| VPERM(v16,v16,v16,byteswap) |
| VPERM(v17,v17,v17,byteswap) |
| lvx v18,off32,r4 |
| lvx v19,off48,r4 |
| VPERM(v18,v18,v18,byteswap) |
| VPERM(v19,v19,v19,byteswap) |
| lvx v20,off64,r4 |
| lvx v21,off80,r4 |
| VPERM(v20,v20,v20,byteswap) |
| VPERM(v21,v21,v21,byteswap) |
| lvx v22,off96,r4 |
| lvx v23,off112,r4 |
| VPERM(v22,v22,v22,byteswap) |
| VPERM(v23,v23,v23,byteswap) |
| addi r4,r4,8*16 |
| |
| /* xor in initial value */ |
| vxor v16,v16,v8 |
| |
| 2: bdz .Lfirst_warm_up_done |
| |
| addi r3,r3,16 |
| lvx const2,0,r3 |
| |
| /* Second warm up pass */ |
| VPMSUMD(v8,v16,const1) |
| lvx v16,0,r4 |
| VPERM(v16,v16,v16,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v9,v17,const1) |
| lvx v17,off16,r4 |
| VPERM(v17,v17,v17,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v10,v18,const1) |
| lvx v18,off32,r4 |
| VPERM(v18,v18,v18,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v11,v19,const1) |
| lvx v19,off48,r4 |
| VPERM(v19,v19,v19,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v12,v20,const1) |
| lvx v20,off64,r4 |
| VPERM(v20,v20,v20,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v13,v21,const1) |
| lvx v21,off80,r4 |
| VPERM(v21,v21,v21,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v14,v22,const1) |
| lvx v22,off96,r4 |
| VPERM(v22,v22,v22,byteswap) |
| ori r2,r2,0 |
| |
| VPMSUMD(v15,v23,const1) |
| lvx v23,off112,r4 |
| VPERM(v23,v23,v23,byteswap) |
| |
| addi r4,r4,8*16 |
| |
| bdz .Lfirst_cool_down |
| |
| /* |
| * main loop. We modulo schedule it such that it takes three iterations |
| * to complete - first iteration load, second iteration vpmsum, third |
| * iteration xor. |
| */ |
| .balign 16 |
| 4: lvx const1,0,r3 |
| addi r3,r3,16 |
| ori r2,r2,0 |
| |
| vxor v0,v0,v8 |
| VPMSUMD(v8,v16,const2) |
| lvx v16,0,r4 |
| VPERM(v16,v16,v16,byteswap) |
| ori r2,r2,0 |
| |
| vxor v1,v1,v9 |
| VPMSUMD(v9,v17,const2) |
| lvx v17,off16,r4 |
| VPERM(v17,v17,v17,byteswap) |
| ori r2,r2,0 |
| |
| vxor v2,v2,v10 |
| VPMSUMD(v10,v18,const2) |
| lvx v18,off32,r4 |
| VPERM(v18,v18,v18,byteswap) |
| ori r2,r2,0 |
| |
| vxor v3,v3,v11 |
| VPMSUMD(v11,v19,const2) |
| lvx v19,off48,r4 |
| VPERM(v19,v19,v19,byteswap) |
| lvx const2,0,r3 |
| ori r2,r2,0 |
| |
| vxor v4,v4,v12 |
| VPMSUMD(v12,v20,const1) |
| lvx v20,off64,r4 |
| VPERM(v20,v20,v20,byteswap) |
| ori r2,r2,0 |
| |
| vxor v5,v5,v13 |
| VPMSUMD(v13,v21,const1) |
| lvx v21,off80,r4 |
| VPERM(v21,v21,v21,byteswap) |
| ori r2,r2,0 |
| |
| vxor v6,v6,v14 |
| VPMSUMD(v14,v22,const1) |
| lvx v22,off96,r4 |
| VPERM(v22,v22,v22,byteswap) |
| ori r2,r2,0 |
| |
| vxor v7,v7,v15 |
| VPMSUMD(v15,v23,const1) |
| lvx v23,off112,r4 |
| VPERM(v23,v23,v23,byteswap) |
| |
| addi r4,r4,8*16 |
| |
| bdnz 4b |
| |
| .Lfirst_cool_down: |
| /* First cool down pass */ |
| lvx const1,0,r3 |
| addi r3,r3,16 |
| |
| vxor v0,v0,v8 |
| VPMSUMD(v8,v16,const1) |
| ori r2,r2,0 |
| |
| vxor v1,v1,v9 |
| VPMSUMD(v9,v17,const1) |
| ori r2,r2,0 |
| |
| vxor v2,v2,v10 |
| VPMSUMD(v10,v18,const1) |
| ori r2,r2,0 |
| |
| vxor v3,v3,v11 |
| VPMSUMD(v11,v19,const1) |
| ori r2,r2,0 |
| |
| vxor v4,v4,v12 |
| VPMSUMD(v12,v20,const1) |
| ori r2,r2,0 |
| |
| vxor v5,v5,v13 |
| VPMSUMD(v13,v21,const1) |
| ori r2,r2,0 |
| |
| vxor v6,v6,v14 |
| VPMSUMD(v14,v22,const1) |
| ori r2,r2,0 |
| |
| vxor v7,v7,v15 |
| VPMSUMD(v15,v23,const1) |
| ori r2,r2,0 |
| |
| .Lsecond_cool_down: |
| /* Second cool down pass */ |
| vxor v0,v0,v8 |
| vxor v1,v1,v9 |
| vxor v2,v2,v10 |
| vxor v3,v3,v11 |
| vxor v4,v4,v12 |
| vxor v5,v5,v13 |
| vxor v6,v6,v14 |
| vxor v7,v7,v15 |
| |
| #ifdef REFLECT |
| /* |
| * vpmsumd produces a 96 bit result in the least significant bits |
| * of the register. Since we are bit reflected we have to shift it |
| * left 32 bits so it occupies the least significant bits in the |
| * bit reflected domain. |
| */ |
| vsldoi v0,v0,zeroes,4 |
| vsldoi v1,v1,zeroes,4 |
| vsldoi v2,v2,zeroes,4 |
| vsldoi v3,v3,zeroes,4 |
| vsldoi v4,v4,zeroes,4 |
| vsldoi v5,v5,zeroes,4 |
| vsldoi v6,v6,zeroes,4 |
| vsldoi v7,v7,zeroes,4 |
| #endif |
| |
| /* xor with last 1024 bits */ |
| lvx v8,0,r4 |
| lvx v9,off16,r4 |
| VPERM(v8,v8,v8,byteswap) |
| VPERM(v9,v9,v9,byteswap) |
| lvx v10,off32,r4 |
| lvx v11,off48,r4 |
| VPERM(v10,v10,v10,byteswap) |
| VPERM(v11,v11,v11,byteswap) |
| lvx v12,off64,r4 |
| lvx v13,off80,r4 |
| VPERM(v12,v12,v12,byteswap) |
| VPERM(v13,v13,v13,byteswap) |
| lvx v14,off96,r4 |
| lvx v15,off112,r4 |
| VPERM(v14,v14,v14,byteswap) |
| VPERM(v15,v15,v15,byteswap) |
| |
| addi r4,r4,8*16 |
| |
| vxor v16,v0,v8 |
| vxor v17,v1,v9 |
| vxor v18,v2,v10 |
| vxor v19,v3,v11 |
| vxor v20,v4,v12 |
| vxor v21,v5,v13 |
| vxor v22,v6,v14 |
| vxor v23,v7,v15 |
| |
| li r0,1 |
| cmpdi r6,0 |
| addi r6,r6,128 |
| bne 1b |
| |
| /* Work out how many bytes we have left */ |
| andi. r5,r5,127 |
| |
| /* Calculate where in the constant table we need to start */ |
| subfic r6,r5,128 |
| add r3,r3,r6 |
| |
| /* How many 16 byte chunks are in the tail */ |
| srdi r7,r5,4 |
| mtctr r7 |
| |
| /* |
| * Reduce the previously calculated 1024 bits to 64 bits, shifting |
| * 32 bits to include the trailing 32 bits of zeros |
| */ |
| lvx v0,0,r3 |
| lvx v1,off16,r3 |
| lvx v2,off32,r3 |
| lvx v3,off48,r3 |
| lvx v4,off64,r3 |
| lvx v5,off80,r3 |
| lvx v6,off96,r3 |
| lvx v7,off112,r3 |
| addi r3,r3,8*16 |
| |
| VPMSUMW(v0,v16,v0) |
| VPMSUMW(v1,v17,v1) |
| VPMSUMW(v2,v18,v2) |
| VPMSUMW(v3,v19,v3) |
| VPMSUMW(v4,v20,v4) |
| VPMSUMW(v5,v21,v5) |
| VPMSUMW(v6,v22,v6) |
| VPMSUMW(v7,v23,v7) |
| |
| /* Now reduce the tail (0 - 112 bytes) */ |
| cmpdi r7,0 |
| beq 1f |
| |
| lvx v16,0,r4 |
| lvx v17,0,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| bdz 1f |
| |
| lvx v16,off16,r4 |
| lvx v17,off16,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| bdz 1f |
| |
| lvx v16,off32,r4 |
| lvx v17,off32,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| bdz 1f |
| |
| lvx v16,off48,r4 |
| lvx v17,off48,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| bdz 1f |
| |
| lvx v16,off64,r4 |
| lvx v17,off64,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| bdz 1f |
| |
| lvx v16,off80,r4 |
| lvx v17,off80,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| bdz 1f |
| |
| lvx v16,off96,r4 |
| lvx v17,off96,r3 |
| VPERM(v16,v16,v16,byteswap) |
| VPMSUMW(v16,v16,v17) |
| vxor v0,v0,v16 |
| |
| /* Now xor all the parallel chunks together */ |
| 1: vxor v0,v0,v1 |
| vxor v2,v2,v3 |
| vxor v4,v4,v5 |
| vxor v6,v6,v7 |
| |
| vxor v0,v0,v2 |
| vxor v4,v4,v6 |
| |
| vxor v0,v0,v4 |
| |
| .Lbarrett_reduction: |
| /* Barrett constants */ |
| addis r3,r2,.barrett_constants@toc@ha |
| addi r3,r3,.barrett_constants@toc@l |
| |
| lvx const1,0,r3 |
| lvx const2,off16,r3 |
| |
| vsldoi v1,v0,v0,8 |
| vxor v0,v0,v1 /* xor two 64 bit results together */ |
| |
| #ifdef REFLECT |
| /* shift left one bit */ |
| vspltisb v1,1 |
| vsl v0,v0,v1 |
| #endif |
| |
| vand v0,v0,mask_64bit |
| #ifndef REFLECT |
| /* |
| * Now for the Barrett reduction algorithm. The idea is to calculate q, |
| * the multiple of our polynomial that we need to subtract. By |
| * doing the computation 2x bits higher (ie 64 bits) and shifting the |
| * result back down 2x bits, we round down to the nearest multiple. |
| */ |
| VPMSUMD(v1,v0,const1) /* ma */ |
| vsldoi v1,zeroes,v1,8 /* q = floor(ma/(2^64)) */ |
| VPMSUMD(v1,v1,const2) /* qn */ |
| vxor v0,v0,v1 /* a - qn, subtraction is xor in GF(2) */ |
| |
| /* |
| * Get the result into r3. We need to shift it left 8 bytes: |
| * V0 [ 0 1 2 X ] |
| * V0 [ 0 X 2 3 ] |
| */ |
| vsldoi v0,v0,zeroes,8 /* shift result into top 64 bits */ |
| #else |
| /* |
| * The reflected version of Barrett reduction. Instead of bit |
| * reflecting our data (which is expensive to do), we bit reflect our |
| * constants and our algorithm, which means the intermediate data in |
| * our vector registers goes from 0-63 instead of 63-0. We can reflect |
| * the algorithm because we don't carry in mod 2 arithmetic. |
| */ |
| vand v1,v0,mask_32bit /* bottom 32 bits of a */ |
| VPMSUMD(v1,v1,const1) /* ma */ |
| vand v1,v1,mask_32bit /* bottom 32bits of ma */ |
| VPMSUMD(v1,v1,const2) /* qn */ |
| vxor v0,v0,v1 /* a - qn, subtraction is xor in GF(2) */ |
| |
| /* |
| * Since we are bit reflected, the result (ie the low 32 bits) is in |
| * the high 32 bits. We just need to shift it left 4 bytes |
| * V0 [ 0 1 X 3 ] |
| * V0 [ 0 X 2 3 ] |
| */ |
| vsldoi v0,v0,zeroes,4 /* shift result into top 64 bits of */ |
| #endif |
| |
| /* Get it into r3 */ |
| MFVRD(R3, v0) |
| |
| .Lout: |
| subi r6,r1,56+10*16 |
| subi r7,r1,56+2*16 |
| |
| lvx v20,0,r6 |
| lvx v21,off16,r6 |
| lvx v22,off32,r6 |
| lvx v23,off48,r6 |
| lvx v24,off64,r6 |
| lvx v25,off80,r6 |
| lvx v26,off96,r6 |
| lvx v27,off112,r6 |
| lvx v28,0,r7 |
| lvx v29,off16,r7 |
| |
| ld r31,-8(r1) |
| ld r30,-16(r1) |
| ld r29,-24(r1) |
| ld r28,-32(r1) |
| ld r27,-40(r1) |
| ld r26,-48(r1) |
| ld r25,-56(r1) |
| |
| blr |
| |
| .Lfirst_warm_up_done: |
| lvx const1,0,r3 |
| addi r3,r3,16 |
| |
| VPMSUMD(v8,v16,const1) |
| VPMSUMD(v9,v17,const1) |
| VPMSUMD(v10,v18,const1) |
| VPMSUMD(v11,v19,const1) |
| VPMSUMD(v12,v20,const1) |
| VPMSUMD(v13,v21,const1) |
| VPMSUMD(v14,v22,const1) |
| VPMSUMD(v15,v23,const1) |
| |
| b .Lsecond_cool_down |
| |
| .Lshort: |
| cmpdi r5,0 |
| beq .Lzero |
| |
| addis r3,r2,.short_constants@toc@ha |
| addi r3,r3,.short_constants@toc@l |
| |
| /* Calculate where in the constant table we need to start */ |
| subfic r6,r5,256 |
| add r3,r3,r6 |
| |
| /* How many 16 byte chunks? */ |
| srdi r7,r5,4 |
| mtctr r7 |
| |
| vxor v19,v19,v19 |
| vxor v20,v20,v20 |
| |
| lvx v0,0,r4 |
| lvx v16,0,r3 |
| VPERM(v0,v0,v16,byteswap) |
| vxor v0,v0,v8 /* xor in initial value */ |
| VPMSUMW(v0,v0,v16) |
| bdz .Lv0 |
| |
| lvx v1,off16,r4 |
| lvx v17,off16,r3 |
| VPERM(v1,v1,v17,byteswap) |
| VPMSUMW(v1,v1,v17) |
| bdz .Lv1 |
| |
| lvx v2,off32,r4 |
| lvx v16,off32,r3 |
| VPERM(v2,v2,v16,byteswap) |
| VPMSUMW(v2,v2,v16) |
| bdz .Lv2 |
| |
| lvx v3,off48,r4 |
| lvx v17,off48,r3 |
| VPERM(v3,v3,v17,byteswap) |
| VPMSUMW(v3,v3,v17) |
| bdz .Lv3 |
| |
| lvx v4,off64,r4 |
| lvx v16,off64,r3 |
| VPERM(v4,v4,v16,byteswap) |
| VPMSUMW(v4,v4,v16) |
| bdz .Lv4 |
| |
| lvx v5,off80,r4 |
| lvx v17,off80,r3 |
| VPERM(v5,v5,v17,byteswap) |
| VPMSUMW(v5,v5,v17) |
| bdz .Lv5 |
| |
| lvx v6,off96,r4 |
| lvx v16,off96,r3 |
| VPERM(v6,v6,v16,byteswap) |
| VPMSUMW(v6,v6,v16) |
| bdz .Lv6 |
| |
| lvx v7,off112,r4 |
| lvx v17,off112,r3 |
| VPERM(v7,v7,v17,byteswap) |
| VPMSUMW(v7,v7,v17) |
| bdz .Lv7 |
| |
| addi r3,r3,128 |
| addi r4,r4,128 |
| |
| lvx v8,0,r4 |
| lvx v16,0,r3 |
| VPERM(v8,v8,v16,byteswap) |
| VPMSUMW(v8,v8,v16) |
| bdz .Lv8 |
| |
| lvx v9,off16,r4 |
| lvx v17,off16,r3 |
| VPERM(v9,v9,v17,byteswap) |
| VPMSUMW(v9,v9,v17) |
| bdz .Lv9 |
| |
| lvx v10,off32,r4 |
| lvx v16,off32,r3 |
| VPERM(v10,v10,v16,byteswap) |
| VPMSUMW(v10,v10,v16) |
| bdz .Lv10 |
| |
| lvx v11,off48,r4 |
| lvx v17,off48,r3 |
| VPERM(v11,v11,v17,byteswap) |
| VPMSUMW(v11,v11,v17) |
| bdz .Lv11 |
| |
| lvx v12,off64,r4 |
| lvx v16,off64,r3 |
| VPERM(v12,v12,v16,byteswap) |
| VPMSUMW(v12,v12,v16) |
| bdz .Lv12 |
| |
| lvx v13,off80,r4 |
| lvx v17,off80,r3 |
| VPERM(v13,v13,v17,byteswap) |
| VPMSUMW(v13,v13,v17) |
| bdz .Lv13 |
| |
| lvx v14,off96,r4 |
| lvx v16,off96,r3 |
| VPERM(v14,v14,v16,byteswap) |
| VPMSUMW(v14,v14,v16) |
| bdz .Lv14 |
| |
| lvx v15,off112,r4 |
| lvx v17,off112,r3 |
| VPERM(v15,v15,v17,byteswap) |
| VPMSUMW(v15,v15,v17) |
| |
| .Lv15: vxor v19,v19,v15 |
| .Lv14: vxor v20,v20,v14 |
| .Lv13: vxor v19,v19,v13 |
| .Lv12: vxor v20,v20,v12 |
| .Lv11: vxor v19,v19,v11 |
| .Lv10: vxor v20,v20,v10 |
| .Lv9: vxor v19,v19,v9 |
| .Lv8: vxor v20,v20,v8 |
| .Lv7: vxor v19,v19,v7 |
| .Lv6: vxor v20,v20,v6 |
| .Lv5: vxor v19,v19,v5 |
| .Lv4: vxor v20,v20,v4 |
| .Lv3: vxor v19,v19,v3 |
| .Lv2: vxor v20,v20,v2 |
| .Lv1: vxor v19,v19,v1 |
| .Lv0: vxor v20,v20,v0 |
| |
| vxor v0,v19,v20 |
| |
| b .Lbarrett_reduction |
| |
| .Lzero: |
| mr r3,r10 |
| b .Lout |
| |
| FUNC_END(CRC_FUNCTION_NAME) |
