drivers/staging/winbond/wb35rx.c - linux - Git at Google

 //============================================================================
 //  Copyright (c) 1996-2002 Winbond Electronic Corporation
 //
 //  Module Name:
 //    Wb35Rx.c
 //
 //  Abstract:
 //    Processing the Rx message from down layer
 //
 //============================================================================
 #include <linux/usb.h>

 #include "core.h"
 #include "sysdef.h"
 #include "wb35rx_f.h"

 static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress, int PacketSize)
 {
 	struct wbsoft_priv *priv = hw->priv;
 	struct sk_buff *skb;
 	struct ieee80211_rx_status rx_status = {0};

 	if (!priv->enabled)
 		return;

 	skb = dev_alloc_skb(PacketSize);
 	if (!skb) {
 		printk("Not enough memory for packet, FIXME\n");
 		return;
 	}

 	memcpy(skb_put(skb, PacketSize),
 	       pRxBufferAddress,
 	       PacketSize);

 /*
 	rx_status.rate = 10;
 	rx_status.channel = 1;
 	rx_status.freq = 12345;
 	rx_status.phymode = MODE_IEEE80211B;
 */

 	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
 	ieee80211_rx_irqsafe(hw, skb);
 }

 static void Wb35Rx_adjust(struct wb35_descriptor *pRxDes)
 {
 	u32 *	pRxBufferAddress;
 	u32	DecryptionMethod;
 	u32	i;
 	u16	BufferSize;

 	DecryptionMethod = pRxDes->R01.R01_decryption_method;
 	pRxBufferAddress = pRxDes->buffer_address[0];
 	BufferSize = pRxDes->buffer_size[0];

 	// Adjust the last part of data. Only data left
 	BufferSize -= 4; // For CRC-32
 	if (DecryptionMethod)
 		BufferSize -= 4;
 	if (DecryptionMethod == 3) // For CCMP
 		BufferSize -= 4;

 	// Adjust the IV field which after 802.11 header and ICV field.
 	if (DecryptionMethod == 1) // For WEP
 	{
 		for( i=6; i>0; i-- )
 			pRxBufferAddress[i] = pRxBufferAddress[i-1];
 		pRxDes->buffer_address[0] = pRxBufferAddress + 1;
 		BufferSize -= 4; // 4 byte for IV
 	}
 	else if( DecryptionMethod ) // For TKIP and CCMP
 	{
 		for (i=7; i>1; i--)
 			pRxBufferAddress[i] = pRxBufferAddress[i-2];
 		pRxDes->buffer_address[0] = pRxBufferAddress + 2;//Update the descriptor, shift 8 byte
 		BufferSize -= 8; // 8 byte for IV + ICV
 	}
 	pRxDes->buffer_size[0] = BufferSize;
 }

 static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
 {
 	struct wbsoft_priv *priv = hw->priv;
 	struct hw_data * pHwData = &priv->sHwData;
 	struct wb35_descriptor	RxDes;
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 	u8 *		pRxBufferAddress;
 	u16		PacketSize;
 	u16		stmp, BufferSize, stmp2 = 0;
 	u32		RxBufferId;

 	// Only one thread be allowed to run into the following
 	do {
 		RxBufferId = pWb35Rx->RxProcessIndex;
 		if (pWb35Rx->RxOwner[ RxBufferId ]) //Owner by VM
 			break;

 		pWb35Rx->RxProcessIndex++;
 		pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER;

 		pRxBufferAddress = pWb35Rx->pDRx;
 		BufferSize = pWb35Rx->RxBufferSize[ RxBufferId ];

 		// Parse the bulkin buffer
 		while (BufferSize >= 4) {
 			if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a
 				break;

 			// Get the R00 R01 first
 			RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
 			PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
 			RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress+4)));
 			// For new DMA 4k
 			if ((PacketSize & 0x03) > 0)
 				PacketSize -= 4;

 			// Basic check for Rx length. Is length valid?
 			if (PacketSize > MAX_PACKET_SIZE) {
 				#ifdef _PE_RX_DUMP_
 				printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
 				#endif

 				pWb35Rx->EP3vm_state = VM_STOP;
 				pWb35Rx->Ep3ErrorCount2++;
 				break;
 			}

 			// Start to process Rx buffer
 //			RxDes.Descriptor_ID = RxBufferId; // Due to synchronous indicate, the field doesn't necessary to use.
 			BufferSize -= 8; //subtract 8 byte for 35's USB header length
 			pRxBufferAddress += 8;

 			RxDes.buffer_address[0] = pRxBufferAddress;
 			RxDes.buffer_size[0] = PacketSize;
 			RxDes.buffer_number = 1;
 			RxDes.buffer_start_index = 0;
 			RxDes.buffer_total_size = RxDes.buffer_size[0];
 			Wb35Rx_adjust(&RxDes);

 			packet_came(hw, pRxBufferAddress, PacketSize);

 			// Move RxBuffer point to the next
 			stmp = PacketSize + 3;
 			stmp &= ~0x03; // 4n alignment
 			pRxBufferAddress += stmp;
 			BufferSize -= stmp;
 			stmp2 += stmp;
 		}

 		// Reclaim resource
 		pWb35Rx->RxOwner[ RxBufferId ] = 1;
 	} while (true);

 	return stmp2;
 }

 static void Wb35Rx(struct ieee80211_hw *hw);

 static void Wb35Rx_Complete(struct urb *urb)
 {
 	struct ieee80211_hw *hw = urb->context;
 	struct wbsoft_priv *priv = hw->priv;
 	struct hw_data * pHwData = &priv->sHwData;
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 	u8 *		pRxBufferAddress;
 	u32		SizeCheck;
 	u16		BulkLength;
 	u32		RxBufferId;
 	R00_DESCRIPTOR 	R00;

 	// Variable setting
 	pWb35Rx->EP3vm_state = VM_COMPLETED;
 	pWb35Rx->EP3VM_status = urb->status;//Store the last result of Irp

 	RxBufferId = pWb35Rx->CurrentRxBufferId;

 	pRxBufferAddress = pWb35Rx->pDRx;
 	BulkLength = (u16)urb->actual_length;

 	// The IRP is completed
 	pWb35Rx->EP3vm_state = VM_COMPLETED;

 	if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
 		goto error;

 	if (pWb35Rx->rx_halt)
 		goto error;

 	// Start to process the data only in successful condition
 	pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
 	R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);

 	// The URB is completed, check the result
 	if (pWb35Rx->EP3VM_status != 0) {
 		#ifdef _PE_USB_STATE_DUMP_
 		printk("EP3 IoCompleteRoutine return error\n");
 		#endif
 		pWb35Rx->EP3vm_state = VM_STOP;
 		goto error;
 	}

 	// 20060220 For recovering. check if operating in single USB mode
 	if (!HAL_USB_MODE_BURST(pHwData)) {
 		SizeCheck = R00.R00_receive_byte_count;  //20060926 anson's endian
 		if ((SizeCheck & 0x03) > 0)
 			SizeCheck -= 4;
 		SizeCheck = (SizeCheck + 3) & ~0x03;
 		SizeCheck += 12; // 8 + 4 badbeef
 		if ((BulkLength > 1600) ||
 			(SizeCheck > 1600) ||
 			(BulkLength != SizeCheck) ||
 			(BulkLength == 0)) { // Add for fail Urb
 			pWb35Rx->EP3vm_state = VM_STOP;
 			pWb35Rx->Ep3ErrorCount2++;
 		}
 	}

 	// Indicating the receiving data
 	pWb35Rx->ByteReceived += BulkLength;
 	pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;

 	if (!pWb35Rx->RxOwner[ RxBufferId ])
 		Wb35Rx_indicate(hw);

 	kfree(pWb35Rx->pDRx);
 	// Do the next receive
 	Wb35Rx(hw);
 	return;

 error:
 	pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware
 	atomic_dec(&pWb35Rx->RxFireCounter);
 	pWb35Rx->EP3vm_state = VM_STOP;
 }

 // This function cannot reentrain
 static void Wb35Rx(struct ieee80211_hw *hw)
 {
 	struct wbsoft_priv *priv = hw->priv;
 	struct hw_data * pHwData = &priv->sHwData;
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 	u8 *	pRxBufferAddress;
 	struct urb *urb = pWb35Rx->RxUrb;
 	int	retv;
 	u32	RxBufferId;

 	//
 	// Issuing URB
 	//
 	if (pHwData->SurpriseRemove || pHwData->HwStop)
 		goto error;

 	if (pWb35Rx->rx_halt)
 		goto error;

 	// Get RxBuffer's ID
 	RxBufferId = pWb35Rx->RxBufferId;
 	if (!pWb35Rx->RxOwner[RxBufferId]) {
 		// It's impossible to run here.
 		#ifdef _PE_RX_DUMP_
 		printk("Rx driver fifo unavailable\n");
 		#endif
 		goto error;
 	}

 	// Update buffer point, then start to bulkin the data from USB
 	pWb35Rx->RxBufferId++;
 	pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;

 	pWb35Rx->CurrentRxBufferId = RxBufferId;

 	pWb35Rx->pDRx = kzalloc(MAX_USB_RX_BUFFER, GFP_ATOMIC);
 	if (!pWb35Rx->pDRx) {
 		printk("w35und: Rx memory alloc failed\n");
 		goto error;
 	}
 	pRxBufferAddress = pWb35Rx->pDRx;

 	usb_fill_bulk_urb(urb, pHwData->WbUsb.udev,
 			  usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
 			  pRxBufferAddress, MAX_USB_RX_BUFFER,
 			  Wb35Rx_Complete, hw);

 	pWb35Rx->EP3vm_state = VM_RUNNING;

 	retv = usb_submit_urb(urb, GFP_ATOMIC);

 	if (retv != 0) {
 		printk("Rx URB sending error\n");
 		goto error;
 	}
 	return;

 error:
 	// VM stop
 	pWb35Rx->EP3vm_state = VM_STOP;
 	atomic_dec(&pWb35Rx->RxFireCounter);
 }

 void Wb35Rx_start(struct ieee80211_hw *hw)
 {
 	struct wbsoft_priv *priv = hw->priv;
 	struct hw_data * pHwData = &priv->sHwData;
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

 	// Allow only one thread to run into the Wb35Rx() function
 	if (atomic_inc_return(&pWb35Rx->RxFireCounter) == 1) {
 		pWb35Rx->EP3vm_state = VM_RUNNING;
 		Wb35Rx(hw);
 	} else
 		atomic_dec(&pWb35Rx->RxFireCounter);
 }

 //=====================================================================================
 static void Wb35Rx_reset_descriptor(  struct hw_data * pHwData )
 {
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 	u32	i;

 	pWb35Rx->ByteReceived = 0;
 	pWb35Rx->RxProcessIndex = 0;
 	pWb35Rx->RxBufferId = 0;
 	pWb35Rx->EP3vm_state = VM_STOP;
 	pWb35Rx->rx_halt = 0;

 	// Initial the Queue. The last buffer is reserved for used if the Rx resource is unavailable.
 	for( i=0; i<MAX_USB_RX_BUFFER_NUMBER; i++ )
 		pWb35Rx->RxOwner[i] = 1;
 }

 unsigned char Wb35Rx_initial(struct hw_data * pHwData)
 {
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

 	// Initial the Buffer Queue
 	Wb35Rx_reset_descriptor( pHwData );

 	pWb35Rx->RxUrb = usb_alloc_urb(0, GFP_ATOMIC);
 	return (!!pWb35Rx->RxUrb);
 }

 void Wb35Rx_stop(struct hw_data * pHwData)
 {
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

 	// Canceling the Irp if already sends it out.
 	if (pWb35Rx->EP3vm_state == VM_RUNNING) {
 		usb_unlink_urb( pWb35Rx->RxUrb ); // Only use unlink, let Wb35Rx_destroy to free them
 		#ifdef _PE_RX_DUMP_
 		printk("EP3 Rx stop\n");
 		#endif
 	}
 }

 // Needs process context
 void Wb35Rx_destroy(struct hw_data * pHwData)
 {
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

 	do {
 		msleep(10); // Delay for waiting function enter 940623.1.a
 	} while (pWb35Rx->EP3vm_state != VM_STOP);
 	msleep(10); // Delay for waiting function exit 940623.1.b

 	if (pWb35Rx->RxUrb)
 		usb_free_urb( pWb35Rx->RxUrb );
 	#ifdef _PE_RX_DUMP_
 	printk("Wb35Rx_destroy OK\n");
 	#endif
 }
	//============================================================================
	// Copyright (c) 1996-2002 Winbond Electronic Corporation
	//
	// Module Name:
	// Wb35Rx.c
	//
	// Abstract:
	// Processing the Rx message from down layer
	//
	//============================================================================
	#include <linux/usb.h>

	#include "core.h"
	#include "sysdef.h"
	#include "wb35rx_f.h"

	static void packet_came(struct ieee80211_hw hw, char pRxBufferAddress, int PacketSize)
	{
	struct wbsoft_priv *priv = hw->priv;
	struct sk_buff *skb;
	struct ieee80211_rx_status rx_status = {0};

	if (!priv->enabled)
	return;

	skb = dev_alloc_skb(PacketSize);
	if (!skb) {
	printk("Not enough memory for packet, FIXME\n");
	return;
	}

	memcpy(skb_put(skb, PacketSize),
	pRxBufferAddress,
	PacketSize);

	/*
	rx_status.rate = 10;
	rx_status.channel = 1;
	rx_status.freq = 12345;
	rx_status.phymode = MODE_IEEE80211B;
	*/

	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
	ieee80211_rx_irqsafe(hw, skb);
	}

	static void Wb35Rx_adjust(struct wb35_descriptor *pRxDes)
	{
	u32 * pRxBufferAddress;
	u32 DecryptionMethod;
	u32 i;
	u16 BufferSize;

	DecryptionMethod = pRxDes->R01.R01_decryption_method;
	pRxBufferAddress = pRxDes->buffer_address[0];
	BufferSize = pRxDes->buffer_size[0];

	// Adjust the last part of data. Only data left
	BufferSize -= 4; // For CRC-32
	if (DecryptionMethod)
	BufferSize -= 4;
	if (DecryptionMethod == 3) // For CCMP
	BufferSize -= 4;

	// Adjust the IV field which after 802.11 header and ICV field.
	if (DecryptionMethod == 1) // For WEP
	{
	for( i=6; i>0; i-- )
	pRxBufferAddress[i] = pRxBufferAddress[i-1];
	pRxDes->buffer_address[0] = pRxBufferAddress + 1;
	BufferSize -= 4; // 4 byte for IV
	}
	else if( DecryptionMethod ) // For TKIP and CCMP
	{
	for (i=7; i>1; i--)
	pRxBufferAddress[i] = pRxBufferAddress[i-2];
	pRxDes->buffer_address[0] = pRxBufferAddress + 2;//Update the descriptor, shift 8 byte
	BufferSize -= 8; // 8 byte for IV + ICV
	}
	pRxDes->buffer_size[0] = BufferSize;
	}

	static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
	{
	struct wbsoft_priv *priv = hw->priv;
	struct hw_data * pHwData = &priv->sHwData;
	struct wb35_descriptor RxDes;
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
	u8 * pRxBufferAddress;
	u16 PacketSize;
	u16 stmp, BufferSize, stmp2 = 0;
	u32 RxBufferId;

	// Only one thread be allowed to run into the following
	do {
	RxBufferId = pWb35Rx->RxProcessIndex;
	if (pWb35Rx->RxOwner[ RxBufferId ]) //Owner by VM
	break;

	pWb35Rx->RxProcessIndex++;
	pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER;

	pRxBufferAddress = pWb35Rx->pDRx;
	BufferSize = pWb35Rx->RxBufferSize[ RxBufferId ];

	// Parse the bulkin buffer
	while (BufferSize >= 4) {
	if ((cpu_to_le32((u32 )pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a
	break;

	// Get the R00 R01 first
	RxDes.R00.value = le32_to_cpu((u32 )pRxBufferAddress);
	PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
	RxDes.R01.value = le32_to_cpu(((u32 )(pRxBufferAddress+4)));
	// For new DMA 4k
	if ((PacketSize & 0x03) > 0)
	PacketSize -= 4;

	// Basic check for Rx length. Is length valid?
	if (PacketSize > MAX_PACKET_SIZE) {
	#ifdef _PE_RX_DUMP_
	printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
	#endif

	pWb35Rx->EP3vm_state = VM_STOP;
	pWb35Rx->Ep3ErrorCount2++;
	break;
	}

	// Start to process Rx buffer
	// RxDes.Descriptor_ID = RxBufferId; // Due to synchronous indicate, the field doesn't necessary to use.
	BufferSize -= 8; //subtract 8 byte for 35's USB header length
	pRxBufferAddress += 8;

	RxDes.buffer_address[0] = pRxBufferAddress;
	RxDes.buffer_size[0] = PacketSize;
	RxDes.buffer_number = 1;
	RxDes.buffer_start_index = 0;
	RxDes.buffer_total_size = RxDes.buffer_size[0];
	Wb35Rx_adjust(&RxDes);

	packet_came(hw, pRxBufferAddress, PacketSize);

	// Move RxBuffer point to the next
	stmp = PacketSize + 3;
	stmp &= ~0x03; // 4n alignment
	pRxBufferAddress += stmp;
	BufferSize -= stmp;
	stmp2 += stmp;
	}

	// Reclaim resource
	pWb35Rx->RxOwner[ RxBufferId ] = 1;
	} while (true);

	return stmp2;
	}

	static void Wb35Rx(struct ieee80211_hw *hw);

	static void Wb35Rx_Complete(struct urb *urb)
	{
	struct ieee80211_hw *hw = urb->context;
	struct wbsoft_priv *priv = hw->priv;
	struct hw_data * pHwData = &priv->sHwData;
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
	u8 * pRxBufferAddress;
	u32 SizeCheck;
	u16 BulkLength;
	u32 RxBufferId;
	R00_DESCRIPTOR R00;

	// Variable setting
	pWb35Rx->EP3vm_state = VM_COMPLETED;
	pWb35Rx->EP3VM_status = urb->status;//Store the last result of Irp

	RxBufferId = pWb35Rx->CurrentRxBufferId;

	pRxBufferAddress = pWb35Rx->pDRx;
	BulkLength = (u16)urb->actual_length;

	// The IRP is completed
	pWb35Rx->EP3vm_state = VM_COMPLETED;

	if (pHwData->SurpriseRemove \|\| pHwData->HwStop) // Must be here, or RxBufferId is invalid
	goto error;

	if (pWb35Rx->rx_halt)
	goto error;

	// Start to process the data only in successful condition
	pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
	R00.value = le32_to_cpu((u32 )pRxBufferAddress);

	// The URB is completed, check the result
	if (pWb35Rx->EP3VM_status != 0) {
	#ifdef _PE_USB_STATE_DUMP_
	printk("EP3 IoCompleteRoutine return error\n");
	#endif
	pWb35Rx->EP3vm_state = VM_STOP;
	goto error;
	}

	// 20060220 For recovering. check if operating in single USB mode
	if (!HAL_USB_MODE_BURST(pHwData)) {
	SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian
	if ((SizeCheck & 0x03) > 0)
	SizeCheck -= 4;
	SizeCheck = (SizeCheck + 3) & ~0x03;
	SizeCheck += 12; // 8 + 4 badbeef
	if ((BulkLength > 1600) \|\|
	(SizeCheck > 1600) \|\|
	(BulkLength != SizeCheck) \|\|
	(BulkLength == 0)) { // Add for fail Urb
	pWb35Rx->EP3vm_state = VM_STOP;
	pWb35Rx->Ep3ErrorCount2++;
	}
	}

	// Indicating the receiving data
	pWb35Rx->ByteReceived += BulkLength;
	pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;

	if (!pWb35Rx->RxOwner[ RxBufferId ])
	Wb35Rx_indicate(hw);

	kfree(pWb35Rx->pDRx);
	// Do the next receive
	Wb35Rx(hw);
	return;

	error:
	pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware
	atomic_dec(&pWb35Rx->RxFireCounter);
	pWb35Rx->EP3vm_state = VM_STOP;
	}

	// This function cannot reentrain
	static void Wb35Rx(struct ieee80211_hw *hw)
	{
	struct wbsoft_priv *priv = hw->priv;
	struct hw_data * pHwData = &priv->sHwData;
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
	u8 * pRxBufferAddress;
	struct urb *urb = pWb35Rx->RxUrb;
	int retv;
	u32 RxBufferId;

	//
	// Issuing URB
	//
	if (pHwData->SurpriseRemove \|\| pHwData->HwStop)
	goto error;

	if (pWb35Rx->rx_halt)
	goto error;

	// Get RxBuffer's ID
	RxBufferId = pWb35Rx->RxBufferId;
	if (!pWb35Rx->RxOwner[RxBufferId]) {
	// It's impossible to run here.
	#ifdef _PE_RX_DUMP_
	printk("Rx driver fifo unavailable\n");
	#endif
	goto error;
	}

	// Update buffer point, then start to bulkin the data from USB
	pWb35Rx->RxBufferId++;
	pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;

	pWb35Rx->CurrentRxBufferId = RxBufferId;

	pWb35Rx->pDRx = kzalloc(MAX_USB_RX_BUFFER, GFP_ATOMIC);
	if (!pWb35Rx->pDRx) {
	printk("w35und: Rx memory alloc failed\n");
	goto error;
	}
	pRxBufferAddress = pWb35Rx->pDRx;

	usb_fill_bulk_urb(urb, pHwData->WbUsb.udev,
	usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
	pRxBufferAddress, MAX_USB_RX_BUFFER,
	Wb35Rx_Complete, hw);

	pWb35Rx->EP3vm_state = VM_RUNNING;

	retv = usb_submit_urb(urb, GFP_ATOMIC);

	if (retv != 0) {
	printk("Rx URB sending error\n");
	goto error;
	}
	return;

	error:
	// VM stop
	pWb35Rx->EP3vm_state = VM_STOP;
	atomic_dec(&pWb35Rx->RxFireCounter);
	}

	void Wb35Rx_start(struct ieee80211_hw *hw)
	{
	struct wbsoft_priv *priv = hw->priv;
	struct hw_data * pHwData = &priv->sHwData;
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

	// Allow only one thread to run into the Wb35Rx() function
	if (atomic_inc_return(&pWb35Rx->RxFireCounter) == 1) {
	pWb35Rx->EP3vm_state = VM_RUNNING;
	Wb35Rx(hw);
	} else
	atomic_dec(&pWb35Rx->RxFireCounter);
	}

	//=====================================================================================
	static void Wb35Rx_reset_descriptor( struct hw_data * pHwData )
	{
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
	u32 i;

	pWb35Rx->ByteReceived = 0;
	pWb35Rx->RxProcessIndex = 0;
	pWb35Rx->RxBufferId = 0;
	pWb35Rx->EP3vm_state = VM_STOP;
	pWb35Rx->rx_halt = 0;

	// Initial the Queue. The last buffer is reserved for used if the Rx resource is unavailable.
	for( i=0; i<MAX_USB_RX_BUFFER_NUMBER; i++ )
	pWb35Rx->RxOwner[i] = 1;
	}

	unsigned char Wb35Rx_initial(struct hw_data * pHwData)
	{
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

	// Initial the Buffer Queue
	Wb35Rx_reset_descriptor( pHwData );

	pWb35Rx->RxUrb = usb_alloc_urb(0, GFP_ATOMIC);
	return (!!pWb35Rx->RxUrb);
	}

	void Wb35Rx_stop(struct hw_data * pHwData)
	{
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

	// Canceling the Irp if already sends it out.
	if (pWb35Rx->EP3vm_state == VM_RUNNING) {
	usb_unlink_urb( pWb35Rx->RxUrb ); // Only use unlink, let Wb35Rx_destroy to free them
	#ifdef _PE_RX_DUMP_
	printk("EP3 Rx stop\n");
	#endif
	}
	}

	// Needs process context
	void Wb35Rx_destroy(struct hw_data * pHwData)
	{
	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;

	do {
	msleep(10); // Delay for waiting function enter 940623.1.a
	} while (pWb35Rx->EP3vm_state != VM_STOP);
	msleep(10); // Delay for waiting function exit 940623.1.b

	if (pWb35Rx->RxUrb)
	usb_free_urb( pWb35Rx->RxUrb );
	#ifdef _PE_RX_DUMP_
	printk("Wb35Rx_destroy OK\n");
	#endif
	}