blob: 70fb69b923c46da3441cde4bac2ae57e955496c8 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs
maintainers:
- Chris Packham <chris.packham@alliedtelesis.co.nz>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
oneOf:
- items:
- enum:
- mpc5200-i2c
- fsl,mpc5200-i2c
- fsl,mpc5121-i2c
- fsl,mpc8313-i2c
- fsl,mpc8543-i2c
- fsl,mpc8544-i2c
- const: fsl-i2c
- items:
- const: fsl,mpc5200b-i2c
- const: fsl,mpc5200-i2c
- const: fsl-i2c
reg:
maxItems: 1
interrupts:
maxItems: 1
fsl,preserve-clocking:
$ref: /schemas/types.yaml#/definitions/flag
description: |
if defined, the clock settings from the bootloader are
preserved (not touched)
fsl,timeout:
$ref: /schemas/types.yaml#/definitions/uint32
deprecated: true
description: |
I2C bus timeout in microseconds
fsl,i2c-erratum-a004447:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Indicates the presence of QorIQ erratum A-004447, which
says that the standard i2c recovery scheme mechanism does
not work and an alternate implementation is needed.
required:
- compatible
- reg
- interrupts
unevaluatedProperties: false
examples:
- |
/* MPC5121 based board */
i2c@1740 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1740 0x20>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <100000>;
};
- |
/* MPC5200B based board */
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,preserve-clocking;
};
- |
/* MPC8544 base board */
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
clock-frequency = <400000>;
i2c-scl-clk-low-timeout-us = <10000>;
};
...