| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * USB Type-C Connector Class | |
| * | |
| * Copyright (C) 2017, Intel Corporation | |
| * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/property.h> | |
| #include <linux/slab.h> | |
| #include "bus.h" | |
| struct typec_plug { | |
| struct device dev; | |
| enum typec_plug_index index; | |
| struct ida mode_ids; | |
| }; | |
| struct typec_cable { | |
| struct device dev; | |
| enum typec_plug_type type; | |
| struct usb_pd_identity *identity; | |
| unsigned int active:1; | |
| }; | |
| struct typec_partner { | |
| struct device dev; | |
| unsigned int usb_pd:1; | |
| struct usb_pd_identity *identity; | |
| enum typec_accessory accessory; | |
| struct ida mode_ids; | |
| }; | |
| struct typec_port { | |
| unsigned int id; | |
| struct device dev; | |
| struct ida mode_ids; | |
| int prefer_role; | |
| enum typec_data_role data_role; | |
| enum typec_role pwr_role; | |
| enum typec_role vconn_role; | |
| enum typec_pwr_opmode pwr_opmode; | |
| enum typec_port_type port_type; | |
| struct mutex port_type_lock; | |
| enum typec_orientation orientation; | |
| struct typec_switch *sw; | |
| struct typec_mux *mux; | |
| const struct typec_capability *cap; | |
| }; | |
| #define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev) | |
| #define to_typec_plug(_dev_) container_of(_dev_, struct typec_plug, dev) | |
| #define to_typec_cable(_dev_) container_of(_dev_, struct typec_cable, dev) | |
| #define to_typec_partner(_dev_) container_of(_dev_, struct typec_partner, dev) | |
| static const struct device_type typec_partner_dev_type; | |
| static const struct device_type typec_cable_dev_type; | |
| static const struct device_type typec_plug_dev_type; | |
| #define is_typec_partner(_dev_) (_dev_->type == &typec_partner_dev_type) | |
| #define is_typec_cable(_dev_) (_dev_->type == &typec_cable_dev_type) | |
| #define is_typec_plug(_dev_) (_dev_->type == &typec_plug_dev_type) | |
| static DEFINE_IDA(typec_index_ida); | |
| static struct class *typec_class; | |
| /* ------------------------------------------------------------------------- */ | |
| /* Common attributes */ | |
| static const char * const typec_accessory_modes[] = { | |
| [TYPEC_ACCESSORY_NONE] = "none", | |
| [TYPEC_ACCESSORY_AUDIO] = "analog_audio", | |
| [TYPEC_ACCESSORY_DEBUG] = "debug", | |
| }; | |
| static struct usb_pd_identity *get_pd_identity(struct device *dev) | |
| { | |
| if (is_typec_partner(dev)) { | |
| struct typec_partner *partner = to_typec_partner(dev); | |
| return partner->identity; | |
| } else if (is_typec_cable(dev)) { | |
| struct typec_cable *cable = to_typec_cable(dev); | |
| return cable->identity; | |
| } | |
| return NULL; | |
| } | |
| static ssize_t id_header_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct usb_pd_identity *id = get_pd_identity(dev); | |
| return sprintf(buf, "0x%08x\n", id->id_header); | |
| } | |
| static DEVICE_ATTR_RO(id_header); | |
| static ssize_t cert_stat_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct usb_pd_identity *id = get_pd_identity(dev); | |
| return sprintf(buf, "0x%08x\n", id->cert_stat); | |
| } | |
| static DEVICE_ATTR_RO(cert_stat); | |
| static ssize_t product_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct usb_pd_identity *id = get_pd_identity(dev); | |
| return sprintf(buf, "0x%08x\n", id->product); | |
| } | |
| static DEVICE_ATTR_RO(product); | |
| static struct attribute *usb_pd_id_attrs[] = { | |
| &dev_attr_id_header.attr, | |
| &dev_attr_cert_stat.attr, | |
| &dev_attr_product.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group usb_pd_id_group = { | |
| .name = "identity", | |
| .attrs = usb_pd_id_attrs, | |
| }; | |
| static const struct attribute_group *usb_pd_id_groups[] = { | |
| &usb_pd_id_group, | |
| NULL, | |
| }; | |
| static void typec_report_identity(struct device *dev) | |
| { | |
| sysfs_notify(&dev->kobj, "identity", "id_header"); | |
| sysfs_notify(&dev->kobj, "identity", "cert_stat"); | |
| sysfs_notify(&dev->kobj, "identity", "product"); | |
| } | |
| /* ------------------------------------------------------------------------- */ | |
| /* Alternate Modes */ | |
| static int altmode_match(struct device *dev, void *data) | |
| { | |
| struct typec_altmode *adev = to_typec_altmode(dev); | |
| struct typec_device_id *id = data; | |
| if (!is_typec_altmode(dev)) | |
| return 0; | |
| return ((adev->svid == id->svid) && (adev->mode == id->mode)); | |
| } | |
| static void typec_altmode_set_partner(struct altmode *altmode) | |
| { | |
| struct typec_altmode *adev = &altmode->adev; | |
| struct typec_device_id id = { adev->svid, adev->mode, }; | |
| struct typec_port *port = typec_altmode2port(adev); | |
| struct altmode *partner; | |
| struct device *dev; | |
| dev = device_find_child(&port->dev, &id, altmode_match); | |
| if (!dev) | |
| return; | |
| /* Bind the port alt mode to the partner/plug alt mode. */ | |
| partner = to_altmode(to_typec_altmode(dev)); | |
| altmode->partner = partner; | |
| /* Bind the partner/plug alt mode to the port alt mode. */ | |
| if (is_typec_plug(adev->dev.parent)) { | |
| struct typec_plug *plug = to_typec_plug(adev->dev.parent); | |
| partner->plug[plug->index] = altmode; | |
| } else { | |
| partner->partner = altmode; | |
| } | |
| } | |
| static void typec_altmode_put_partner(struct altmode *altmode) | |
| { | |
| struct altmode *partner = altmode->partner; | |
| struct typec_altmode *adev; | |
| if (!partner) | |
| return; | |
| adev = &partner->adev; | |
| if (is_typec_plug(adev->dev.parent)) { | |
| struct typec_plug *plug = to_typec_plug(adev->dev.parent); | |
| partner->plug[plug->index] = NULL; | |
| } else { | |
| partner->partner = NULL; | |
| } | |
| put_device(&adev->dev); | |
| } | |
| static int typec_port_fwnode_match(struct device *dev, const void *fwnode) | |
| { | |
| return dev_fwnode(dev) == fwnode; | |
| } | |
| static int typec_port_name_match(struct device *dev, const void *name) | |
| { | |
| return !strcmp((const char *)name, dev_name(dev)); | |
| } | |
| static void *typec_port_match(struct device_connection *con, int ep, void *data) | |
| { | |
| struct device *dev; | |
| /* | |
| * FIXME: Check does the fwnode supports the requested SVID. If it does | |
| * we need to return ERR_PTR(-PROBE_DEFER) when there is no device. | |
| */ | |
| if (con->fwnode) | |
| return class_find_device(typec_class, NULL, con->fwnode, | |
| typec_port_fwnode_match); | |
| dev = class_find_device(typec_class, NULL, con->endpoint[ep], | |
| typec_port_name_match); | |
| return dev ? dev : ERR_PTR(-EPROBE_DEFER); | |
| } | |
| struct typec_altmode * | |
| typec_altmode_register_notifier(struct device *dev, u16 svid, u8 mode, | |
| struct notifier_block *nb) | |
| { | |
| struct typec_device_id id = { svid, mode, }; | |
| struct device *altmode_dev; | |
| struct device *port_dev; | |
| struct altmode *altmode; | |
| int ret; | |
| /* Find the port linked to the caller */ | |
| port_dev = device_connection_find_match(dev, NULL, NULL, | |
| typec_port_match); | |
| if (IS_ERR_OR_NULL(port_dev)) | |
| return port_dev ? ERR_CAST(port_dev) : ERR_PTR(-ENODEV); | |
| /* Find the altmode with matching svid */ | |
| altmode_dev = device_find_child(port_dev, &id, altmode_match); | |
| put_device(port_dev); | |
| if (!altmode_dev) | |
| return ERR_PTR(-ENODEV); | |
| altmode = to_altmode(to_typec_altmode(altmode_dev)); | |
| /* Register notifier */ | |
| ret = blocking_notifier_chain_register(&altmode->nh, nb); | |
| if (ret) { | |
| put_device(altmode_dev); | |
| return ERR_PTR(ret); | |
| } | |
| return &altmode->adev; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_altmode_register_notifier); | |
| void typec_altmode_unregister_notifier(struct typec_altmode *adev, | |
| struct notifier_block *nb) | |
| { | |
| struct altmode *altmode = to_altmode(adev); | |
| blocking_notifier_chain_unregister(&altmode->nh, nb); | |
| put_device(&adev->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_altmode_unregister_notifier); | |
| /** | |
| * typec_altmode_update_active - Report Enter/Exit mode | |
| * @adev: Handle to the alternate mode | |
| * @active: True when the mode has been entered | |
| * | |
| * If a partner or cable plug executes Enter/Exit Mode command successfully, the | |
| * drivers use this routine to report the updated state of the mode. | |
| */ | |
| void typec_altmode_update_active(struct typec_altmode *adev, bool active) | |
| { | |
| char dir[6]; | |
| if (adev->active == active) | |
| return; | |
| if (!is_typec_port(adev->dev.parent) && adev->dev.driver) { | |
| if (!active) | |
| module_put(adev->dev.driver->owner); | |
| else | |
| WARN_ON(!try_module_get(adev->dev.driver->owner)); | |
| } | |
| adev->active = active; | |
| snprintf(dir, sizeof(dir), "mode%d", adev->mode); | |
| sysfs_notify(&adev->dev.kobj, dir, "active"); | |
| sysfs_notify(&adev->dev.kobj, NULL, "active"); | |
| kobject_uevent(&adev->dev.kobj, KOBJ_CHANGE); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_altmode_update_active); | |
| /** | |
| * typec_altmode2port - Alternate Mode to USB Type-C port | |
| * @alt: The Alternate Mode | |
| * | |
| * Returns handle to the port that a cable plug or partner with @alt is | |
| * connected to. | |
| */ | |
| struct typec_port *typec_altmode2port(struct typec_altmode *alt) | |
| { | |
| if (is_typec_plug(alt->dev.parent)) | |
| return to_typec_port(alt->dev.parent->parent->parent); | |
| if (is_typec_partner(alt->dev.parent)) | |
| return to_typec_port(alt->dev.parent->parent); | |
| if (is_typec_port(alt->dev.parent)) | |
| return to_typec_port(alt->dev.parent); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_altmode2port); | |
| static ssize_t | |
| vdo_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_altmode *alt = to_typec_altmode(dev); | |
| return sprintf(buf, "0x%08x\n", alt->vdo); | |
| } | |
| static DEVICE_ATTR_RO(vdo); | |
| static ssize_t | |
| description_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_altmode *alt = to_typec_altmode(dev); | |
| return sprintf(buf, "%s\n", alt->desc ? alt->desc : ""); | |
| } | |
| static DEVICE_ATTR_RO(description); | |
| static ssize_t | |
| active_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_altmode *alt = to_typec_altmode(dev); | |
| return sprintf(buf, "%s\n", alt->active ? "yes" : "no"); | |
| } | |
| static ssize_t active_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| struct typec_altmode *adev = to_typec_altmode(dev); | |
| struct altmode *altmode = to_altmode(adev); | |
| bool enter; | |
| int ret; | |
| ret = kstrtobool(buf, &enter); | |
| if (ret) | |
| return ret; | |
| if (adev->active == enter) | |
| return size; | |
| if (is_typec_port(adev->dev.parent)) { | |
| typec_altmode_update_active(adev, enter); | |
| /* Make sure that the partner exits the mode before disabling */ | |
| if (altmode->partner && !enter && altmode->partner->adev.active) | |
| typec_altmode_exit(&altmode->partner->adev); | |
| } else if (altmode->partner) { | |
| if (enter && !altmode->partner->adev.active) { | |
| dev_warn(dev, "port has the mode disabled\n"); | |
| return -EPERM; | |
| } | |
| } | |
| /* Note: If there is no driver, the mode will not be entered */ | |
| if (adev->ops && adev->ops->activate) { | |
| ret = adev->ops->activate(adev, enter); | |
| if (ret) | |
| return ret; | |
| } | |
| return size; | |
| } | |
| static DEVICE_ATTR_RW(active); | |
| static ssize_t | |
| supported_roles_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct altmode *alt = to_altmode(to_typec_altmode(dev)); | |
| ssize_t ret; | |
| switch (alt->roles) { | |
| case TYPEC_PORT_SRC: | |
| ret = sprintf(buf, "source\n"); | |
| break; | |
| case TYPEC_PORT_SNK: | |
| ret = sprintf(buf, "sink\n"); | |
| break; | |
| case TYPEC_PORT_DRP: | |
| default: | |
| ret = sprintf(buf, "source sink\n"); | |
| break; | |
| } | |
| return ret; | |
| } | |
| static DEVICE_ATTR_RO(supported_roles); | |
| static ssize_t | |
| mode_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_altmode *adev = to_typec_altmode(dev); | |
| return sprintf(buf, "%u\n", adev->mode); | |
| } | |
| static DEVICE_ATTR_RO(mode); | |
| static ssize_t | |
| svid_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_altmode *adev = to_typec_altmode(dev); | |
| return sprintf(buf, "%04x\n", adev->svid); | |
| } | |
| static DEVICE_ATTR_RO(svid); | |
| static struct attribute *typec_altmode_attrs[] = { | |
| &dev_attr_active.attr, | |
| &dev_attr_mode.attr, | |
| &dev_attr_svid.attr, | |
| &dev_attr_vdo.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(typec_altmode); | |
| static int altmode_id_get(struct device *dev) | |
| { | |
| struct ida *ids; | |
| if (is_typec_partner(dev)) | |
| ids = &to_typec_partner(dev)->mode_ids; | |
| else if (is_typec_plug(dev)) | |
| ids = &to_typec_plug(dev)->mode_ids; | |
| else | |
| ids = &to_typec_port(dev)->mode_ids; | |
| return ida_simple_get(ids, 0, 0, GFP_KERNEL); | |
| } | |
| static void altmode_id_remove(struct device *dev, int id) | |
| { | |
| struct ida *ids; | |
| if (is_typec_partner(dev)) | |
| ids = &to_typec_partner(dev)->mode_ids; | |
| else if (is_typec_plug(dev)) | |
| ids = &to_typec_plug(dev)->mode_ids; | |
| else | |
| ids = &to_typec_port(dev)->mode_ids; | |
| ida_simple_remove(ids, id); | |
| } | |
| static void typec_altmode_release(struct device *dev) | |
| { | |
| struct altmode *alt = to_altmode(to_typec_altmode(dev)); | |
| typec_altmode_put_partner(alt); | |
| altmode_id_remove(alt->adev.dev.parent, alt->id); | |
| kfree(alt); | |
| } | |
| const struct device_type typec_altmode_dev_type = { | |
| .name = "typec_alternate_mode", | |
| .groups = typec_altmode_groups, | |
| .release = typec_altmode_release, | |
| }; | |
| static struct typec_altmode * | |
| typec_register_altmode(struct device *parent, | |
| const struct typec_altmode_desc *desc) | |
| { | |
| unsigned int id = altmode_id_get(parent); | |
| bool is_port = is_typec_port(parent); | |
| struct altmode *alt; | |
| int ret; | |
| alt = kzalloc(sizeof(*alt), GFP_KERNEL); | |
| if (!alt) | |
| return ERR_PTR(-ENOMEM); | |
| alt->adev.svid = desc->svid; | |
| alt->adev.mode = desc->mode; | |
| alt->adev.vdo = desc->vdo; | |
| alt->roles = desc->roles; | |
| alt->id = id; | |
| alt->attrs[0] = &dev_attr_vdo.attr; | |
| alt->attrs[1] = &dev_attr_description.attr; | |
| alt->attrs[2] = &dev_attr_active.attr; | |
| if (is_port) { | |
| alt->attrs[3] = &dev_attr_supported_roles.attr; | |
| alt->adev.active = true; /* Enabled by default */ | |
| } | |
| sprintf(alt->group_name, "mode%d", desc->mode); | |
| alt->group.name = alt->group_name; | |
| alt->group.attrs = alt->attrs; | |
| alt->groups[0] = &alt->group; | |
| alt->adev.dev.parent = parent; | |
| alt->adev.dev.groups = alt->groups; | |
| alt->adev.dev.type = &typec_altmode_dev_type; | |
| dev_set_name(&alt->adev.dev, "%s.%u", dev_name(parent), id); | |
| /* Link partners and plugs with the ports */ | |
| if (is_port) | |
| BLOCKING_INIT_NOTIFIER_HEAD(&alt->nh); | |
| else | |
| typec_altmode_set_partner(alt); | |
| /* The partners are bind to drivers */ | |
| if (is_typec_partner(parent)) | |
| alt->adev.dev.bus = &typec_bus; | |
| ret = device_register(&alt->adev.dev); | |
| if (ret) { | |
| dev_err(parent, "failed to register alternate mode (%d)\n", | |
| ret); | |
| put_device(&alt->adev.dev); | |
| return ERR_PTR(ret); | |
| } | |
| return &alt->adev; | |
| } | |
| /** | |
| * typec_unregister_altmode - Unregister Alternate Mode | |
| * @adev: The alternate mode to be unregistered | |
| * | |
| * Unregister device created with typec_partner_register_altmode(), | |
| * typec_plug_register_altmode() or typec_port_register_altmode(). | |
| */ | |
| void typec_unregister_altmode(struct typec_altmode *adev) | |
| { | |
| if (IS_ERR_OR_NULL(adev)) | |
| return; | |
| typec_mux_put(to_altmode(adev)->mux); | |
| device_unregister(&adev->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_unregister_altmode); | |
| /* ------------------------------------------------------------------------- */ | |
| /* Type-C Partners */ | |
| static ssize_t accessory_mode_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_partner *p = to_typec_partner(dev); | |
| return sprintf(buf, "%s\n", typec_accessory_modes[p->accessory]); | |
| } | |
| static DEVICE_ATTR_RO(accessory_mode); | |
| static ssize_t supports_usb_power_delivery_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_partner *p = to_typec_partner(dev); | |
| return sprintf(buf, "%s\n", p->usb_pd ? "yes" : "no"); | |
| } | |
| static DEVICE_ATTR_RO(supports_usb_power_delivery); | |
| static struct attribute *typec_partner_attrs[] = { | |
| &dev_attr_accessory_mode.attr, | |
| &dev_attr_supports_usb_power_delivery.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(typec_partner); | |
| static void typec_partner_release(struct device *dev) | |
| { | |
| struct typec_partner *partner = to_typec_partner(dev); | |
| ida_destroy(&partner->mode_ids); | |
| kfree(partner); | |
| } | |
| static const struct device_type typec_partner_dev_type = { | |
| .name = "typec_partner", | |
| .groups = typec_partner_groups, | |
| .release = typec_partner_release, | |
| }; | |
| /** | |
| * typec_partner_set_identity - Report result from Discover Identity command | |
| * @partner: The partner updated identity values | |
| * | |
| * This routine is used to report that the result of Discover Identity USB power | |
| * delivery command has become available. | |
| */ | |
| int typec_partner_set_identity(struct typec_partner *partner) | |
| { | |
| if (!partner->identity) | |
| return -EINVAL; | |
| typec_report_identity(&partner->dev); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_partner_set_identity); | |
| /** | |
| * typec_partner_register_altmode - Register USB Type-C Partner Alternate Mode | |
| * @partner: USB Type-C Partner that supports the alternate mode | |
| * @desc: Description of the alternate mode | |
| * | |
| * This routine is used to register each alternate mode individually that | |
| * @partner has listed in response to Discover SVIDs command. The modes for a | |
| * SVID listed in response to Discover Modes command need to be listed in an | |
| * array in @desc. | |
| * | |
| * Returns handle to the alternate mode on success or NULL on failure. | |
| */ | |
| struct typec_altmode * | |
| typec_partner_register_altmode(struct typec_partner *partner, | |
| const struct typec_altmode_desc *desc) | |
| { | |
| return typec_register_altmode(&partner->dev, desc); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_partner_register_altmode); | |
| /** | |
| * typec_register_partner - Register a USB Type-C Partner | |
| * @port: The USB Type-C Port the partner is connected to | |
| * @desc: Description of the partner | |
| * | |
| * Registers a device for USB Type-C Partner described in @desc. | |
| * | |
| * Returns handle to the partner on success or ERR_PTR on failure. | |
| */ | |
| struct typec_partner *typec_register_partner(struct typec_port *port, | |
| struct typec_partner_desc *desc) | |
| { | |
| struct typec_partner *partner; | |
| int ret; | |
| partner = kzalloc(sizeof(*partner), GFP_KERNEL); | |
| if (!partner) | |
| return ERR_PTR(-ENOMEM); | |
| ida_init(&partner->mode_ids); | |
| partner->usb_pd = desc->usb_pd; | |
| partner->accessory = desc->accessory; | |
| if (desc->identity) { | |
| /* | |
| * Creating directory for the identity only if the driver is | |
| * able to provide data to it. | |
| */ | |
| partner->dev.groups = usb_pd_id_groups; | |
| partner->identity = desc->identity; | |
| } | |
| partner->dev.class = typec_class; | |
| partner->dev.parent = &port->dev; | |
| partner->dev.type = &typec_partner_dev_type; | |
| dev_set_name(&partner->dev, "%s-partner", dev_name(&port->dev)); | |
| ret = device_register(&partner->dev); | |
| if (ret) { | |
| dev_err(&port->dev, "failed to register partner (%d)\n", ret); | |
| put_device(&partner->dev); | |
| return ERR_PTR(ret); | |
| } | |
| return partner; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_register_partner); | |
| /** | |
| * typec_unregister_partner - Unregister a USB Type-C Partner | |
| * @partner: The partner to be unregistered | |
| * | |
| * Unregister device created with typec_register_partner(). | |
| */ | |
| void typec_unregister_partner(struct typec_partner *partner) | |
| { | |
| if (!IS_ERR_OR_NULL(partner)) | |
| device_unregister(&partner->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_unregister_partner); | |
| /* ------------------------------------------------------------------------- */ | |
| /* Type-C Cable Plugs */ | |
| static void typec_plug_release(struct device *dev) | |
| { | |
| struct typec_plug *plug = to_typec_plug(dev); | |
| ida_destroy(&plug->mode_ids); | |
| kfree(plug); | |
| } | |
| static const struct device_type typec_plug_dev_type = { | |
| .name = "typec_plug", | |
| .release = typec_plug_release, | |
| }; | |
| /** | |
| * typec_plug_register_altmode - Register USB Type-C Cable Plug Alternate Mode | |
| * @plug: USB Type-C Cable Plug that supports the alternate mode | |
| * @desc: Description of the alternate mode | |
| * | |
| * This routine is used to register each alternate mode individually that @plug | |
| * has listed in response to Discover SVIDs command. The modes for a SVID that | |
| * the plug lists in response to Discover Modes command need to be listed in an | |
| * array in @desc. | |
| * | |
| * Returns handle to the alternate mode on success or ERR_PTR on failure. | |
| */ | |
| struct typec_altmode * | |
| typec_plug_register_altmode(struct typec_plug *plug, | |
| const struct typec_altmode_desc *desc) | |
| { | |
| return typec_register_altmode(&plug->dev, desc); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_plug_register_altmode); | |
| /** | |
| * typec_register_plug - Register a USB Type-C Cable Plug | |
| * @cable: USB Type-C Cable with the plug | |
| * @desc: Description of the cable plug | |
| * | |
| * Registers a device for USB Type-C Cable Plug described in @desc. A USB Type-C | |
| * Cable Plug represents a plug with electronics in it that can response to USB | |
| * Power Delivery SOP Prime or SOP Double Prime packages. | |
| * | |
| * Returns handle to the cable plug on success or ERR_PTR on failure. | |
| */ | |
| struct typec_plug *typec_register_plug(struct typec_cable *cable, | |
| struct typec_plug_desc *desc) | |
| { | |
| struct typec_plug *plug; | |
| char name[8]; | |
| int ret; | |
| plug = kzalloc(sizeof(*plug), GFP_KERNEL); | |
| if (!plug) | |
| return ERR_PTR(-ENOMEM); | |
| sprintf(name, "plug%d", desc->index); | |
| ida_init(&plug->mode_ids); | |
| plug->index = desc->index; | |
| plug->dev.class = typec_class; | |
| plug->dev.parent = &cable->dev; | |
| plug->dev.type = &typec_plug_dev_type; | |
| dev_set_name(&plug->dev, "%s-%s", dev_name(cable->dev.parent), name); | |
| ret = device_register(&plug->dev); | |
| if (ret) { | |
| dev_err(&cable->dev, "failed to register plug (%d)\n", ret); | |
| put_device(&plug->dev); | |
| return ERR_PTR(ret); | |
| } | |
| return plug; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_register_plug); | |
| /** | |
| * typec_unregister_plug - Unregister a USB Type-C Cable Plug | |
| * @plug: The cable plug to be unregistered | |
| * | |
| * Unregister device created with typec_register_plug(). | |
| */ | |
| void typec_unregister_plug(struct typec_plug *plug) | |
| { | |
| if (!IS_ERR_OR_NULL(plug)) | |
| device_unregister(&plug->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_unregister_plug); | |
| /* Type-C Cables */ | |
| static ssize_t | |
| type_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_cable *cable = to_typec_cable(dev); | |
| return sprintf(buf, "%s\n", cable->active ? "active" : "passive"); | |
| } | |
| static DEVICE_ATTR_RO(type); | |
| static const char * const typec_plug_types[] = { | |
| [USB_PLUG_NONE] = "unknown", | |
| [USB_PLUG_TYPE_A] = "type-a", | |
| [USB_PLUG_TYPE_B] = "type-b", | |
| [USB_PLUG_TYPE_C] = "type-c", | |
| [USB_PLUG_CAPTIVE] = "captive", | |
| }; | |
| static ssize_t plug_type_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_cable *cable = to_typec_cable(dev); | |
| return sprintf(buf, "%s\n", typec_plug_types[cable->type]); | |
| } | |
| static DEVICE_ATTR_RO(plug_type); | |
| static struct attribute *typec_cable_attrs[] = { | |
| &dev_attr_type.attr, | |
| &dev_attr_plug_type.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(typec_cable); | |
| static void typec_cable_release(struct device *dev) | |
| { | |
| struct typec_cable *cable = to_typec_cable(dev); | |
| kfree(cable); | |
| } | |
| static const struct device_type typec_cable_dev_type = { | |
| .name = "typec_cable", | |
| .groups = typec_cable_groups, | |
| .release = typec_cable_release, | |
| }; | |
| /** | |
| * typec_cable_set_identity - Report result from Discover Identity command | |
| * @cable: The cable updated identity values | |
| * | |
| * This routine is used to report that the result of Discover Identity USB power | |
| * delivery command has become available. | |
| */ | |
| int typec_cable_set_identity(struct typec_cable *cable) | |
| { | |
| if (!cable->identity) | |
| return -EINVAL; | |
| typec_report_identity(&cable->dev); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_cable_set_identity); | |
| /** | |
| * typec_register_cable - Register a USB Type-C Cable | |
| * @port: The USB Type-C Port the cable is connected to | |
| * @desc: Description of the cable | |
| * | |
| * Registers a device for USB Type-C Cable described in @desc. The cable will be | |
| * parent for the optional cable plug devises. | |
| * | |
| * Returns handle to the cable on success or ERR_PTR on failure. | |
| */ | |
| struct typec_cable *typec_register_cable(struct typec_port *port, | |
| struct typec_cable_desc *desc) | |
| { | |
| struct typec_cable *cable; | |
| int ret; | |
| cable = kzalloc(sizeof(*cable), GFP_KERNEL); | |
| if (!cable) | |
| return ERR_PTR(-ENOMEM); | |
| cable->type = desc->type; | |
| cable->active = desc->active; | |
| if (desc->identity) { | |
| /* | |
| * Creating directory for the identity only if the driver is | |
| * able to provide data to it. | |
| */ | |
| cable->dev.groups = usb_pd_id_groups; | |
| cable->identity = desc->identity; | |
| } | |
| cable->dev.class = typec_class; | |
| cable->dev.parent = &port->dev; | |
| cable->dev.type = &typec_cable_dev_type; | |
| dev_set_name(&cable->dev, "%s-cable", dev_name(&port->dev)); | |
| ret = device_register(&cable->dev); | |
| if (ret) { | |
| dev_err(&port->dev, "failed to register cable (%d)\n", ret); | |
| put_device(&cable->dev); | |
| return ERR_PTR(ret); | |
| } | |
| return cable; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_register_cable); | |
| /** | |
| * typec_unregister_cable - Unregister a USB Type-C Cable | |
| * @cable: The cable to be unregistered | |
| * | |
| * Unregister device created with typec_register_cable(). | |
| */ | |
| void typec_unregister_cable(struct typec_cable *cable) | |
| { | |
| if (!IS_ERR_OR_NULL(cable)) | |
| device_unregister(&cable->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_unregister_cable); | |
| /* ------------------------------------------------------------------------- */ | |
| /* USB Type-C ports */ | |
| static const char * const typec_roles[] = { | |
| [TYPEC_SINK] = "sink", | |
| [TYPEC_SOURCE] = "source", | |
| }; | |
| static const char * const typec_data_roles[] = { | |
| [TYPEC_DEVICE] = "device", | |
| [TYPEC_HOST] = "host", | |
| }; | |
| static const char * const typec_port_power_roles[] = { | |
| [TYPEC_PORT_SRC] = "source", | |
| [TYPEC_PORT_SNK] = "sink", | |
| [TYPEC_PORT_DRP] = "dual", | |
| }; | |
| static const char * const typec_port_data_roles[] = { | |
| [TYPEC_PORT_DFP] = "host", | |
| [TYPEC_PORT_UFP] = "device", | |
| [TYPEC_PORT_DRD] = "dual", | |
| }; | |
| static const char * const typec_port_types_drp[] = { | |
| [TYPEC_PORT_SRC] = "dual [source] sink", | |
| [TYPEC_PORT_SNK] = "dual source [sink]", | |
| [TYPEC_PORT_DRP] = "[dual] source sink", | |
| }; | |
| static ssize_t | |
| preferred_role_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| int role; | |
| int ret; | |
| if (port->cap->type != TYPEC_PORT_DRP) { | |
| dev_dbg(dev, "Preferred role only supported with DRP ports\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (!port->cap->try_role) { | |
| dev_dbg(dev, "Setting preferred role not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| role = sysfs_match_string(typec_roles, buf); | |
| if (role < 0) { | |
| if (sysfs_streq(buf, "none")) | |
| role = TYPEC_NO_PREFERRED_ROLE; | |
| else | |
| return -EINVAL; | |
| } | |
| ret = port->cap->try_role(port->cap, role); | |
| if (ret) | |
| return ret; | |
| port->prefer_role = role; | |
| return size; | |
| } | |
| static ssize_t | |
| preferred_role_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| if (port->cap->type != TYPEC_PORT_DRP) | |
| return 0; | |
| if (port->prefer_role < 0) | |
| return 0; | |
| return sprintf(buf, "%s\n", typec_roles[port->prefer_role]); | |
| } | |
| static DEVICE_ATTR_RW(preferred_role); | |
| static ssize_t data_role_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| int ret; | |
| if (!port->cap->dr_set) { | |
| dev_dbg(dev, "data role swapping not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| ret = sysfs_match_string(typec_data_roles, buf); | |
| if (ret < 0) | |
| return ret; | |
| mutex_lock(&port->port_type_lock); | |
| if (port->cap->data != TYPEC_PORT_DRD) { | |
| ret = -EOPNOTSUPP; | |
| goto unlock_and_ret; | |
| } | |
| ret = port->cap->dr_set(port->cap, ret); | |
| if (ret) | |
| goto unlock_and_ret; | |
| ret = size; | |
| unlock_and_ret: | |
| mutex_unlock(&port->port_type_lock); | |
| return ret; | |
| } | |
| static ssize_t data_role_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| if (port->cap->data == TYPEC_PORT_DRD) | |
| return sprintf(buf, "%s\n", port->data_role == TYPEC_HOST ? | |
| "[host] device" : "host [device]"); | |
| return sprintf(buf, "[%s]\n", typec_data_roles[port->data_role]); | |
| } | |
| static DEVICE_ATTR_RW(data_role); | |
| static ssize_t power_role_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| int ret; | |
| if (!port->cap->pd_revision) { | |
| dev_dbg(dev, "USB Power Delivery not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (!port->cap->pr_set) { | |
| dev_dbg(dev, "power role swapping not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (port->pwr_opmode != TYPEC_PWR_MODE_PD) { | |
| dev_dbg(dev, "partner unable to swap power role\n"); | |
| return -EIO; | |
| } | |
| ret = sysfs_match_string(typec_roles, buf); | |
| if (ret < 0) | |
| return ret; | |
| mutex_lock(&port->port_type_lock); | |
| if (port->port_type != TYPEC_PORT_DRP) { | |
| dev_dbg(dev, "port type fixed at \"%s\"", | |
| typec_port_power_roles[port->port_type]); | |
| ret = -EOPNOTSUPP; | |
| goto unlock_and_ret; | |
| } | |
| ret = port->cap->pr_set(port->cap, ret); | |
| if (ret) | |
| goto unlock_and_ret; | |
| ret = size; | |
| unlock_and_ret: | |
| mutex_unlock(&port->port_type_lock); | |
| return ret; | |
| } | |
| static ssize_t power_role_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| if (port->cap->type == TYPEC_PORT_DRP) | |
| return sprintf(buf, "%s\n", port->pwr_role == TYPEC_SOURCE ? | |
| "[source] sink" : "source [sink]"); | |
| return sprintf(buf, "[%s]\n", typec_roles[port->pwr_role]); | |
| } | |
| static DEVICE_ATTR_RW(power_role); | |
| static ssize_t | |
| port_type_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| int ret; | |
| enum typec_port_type type; | |
| if (!port->cap->port_type_set || port->cap->type != TYPEC_PORT_DRP) { | |
| dev_dbg(dev, "changing port type not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| ret = sysfs_match_string(typec_port_power_roles, buf); | |
| if (ret < 0) | |
| return ret; | |
| type = ret; | |
| mutex_lock(&port->port_type_lock); | |
| if (port->port_type == type) { | |
| ret = size; | |
| goto unlock_and_ret; | |
| } | |
| ret = port->cap->port_type_set(port->cap, type); | |
| if (ret) | |
| goto unlock_and_ret; | |
| port->port_type = type; | |
| ret = size; | |
| unlock_and_ret: | |
| mutex_unlock(&port->port_type_lock); | |
| return ret; | |
| } | |
| static ssize_t | |
| port_type_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| if (port->cap->type == TYPEC_PORT_DRP) | |
| return sprintf(buf, "%s\n", | |
| typec_port_types_drp[port->port_type]); | |
| return sprintf(buf, "[%s]\n", typec_port_power_roles[port->cap->type]); | |
| } | |
| static DEVICE_ATTR_RW(port_type); | |
| static const char * const typec_pwr_opmodes[] = { | |
| [TYPEC_PWR_MODE_USB] = "default", | |
| [TYPEC_PWR_MODE_1_5A] = "1.5A", | |
| [TYPEC_PWR_MODE_3_0A] = "3.0A", | |
| [TYPEC_PWR_MODE_PD] = "usb_power_delivery", | |
| }; | |
| static ssize_t power_operation_mode_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| return sprintf(buf, "%s\n", typec_pwr_opmodes[port->pwr_opmode]); | |
| } | |
| static DEVICE_ATTR_RO(power_operation_mode); | |
| static ssize_t vconn_source_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| bool source; | |
| int ret; | |
| if (!port->cap->pd_revision) { | |
| dev_dbg(dev, "VCONN swap depends on USB Power Delivery\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (!port->cap->vconn_set) { | |
| dev_dbg(dev, "VCONN swapping not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| ret = kstrtobool(buf, &source); | |
| if (ret) | |
| return ret; | |
| ret = port->cap->vconn_set(port->cap, (enum typec_role)source); | |
| if (ret) | |
| return ret; | |
| return size; | |
| } | |
| static ssize_t vconn_source_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| return sprintf(buf, "%s\n", | |
| port->vconn_role == TYPEC_SOURCE ? "yes" : "no"); | |
| } | |
| static DEVICE_ATTR_RW(vconn_source); | |
| static ssize_t supported_accessory_modes_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| ssize_t ret = 0; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(port->cap->accessory); i++) { | |
| if (port->cap->accessory[i]) | |
| ret += sprintf(buf + ret, "%s ", | |
| typec_accessory_modes[port->cap->accessory[i]]); | |
| } | |
| if (!ret) | |
| return sprintf(buf, "none\n"); | |
| buf[ret - 1] = '\n'; | |
| return ret; | |
| } | |
| static DEVICE_ATTR_RO(supported_accessory_modes); | |
| static ssize_t usb_typec_revision_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| u16 rev = port->cap->revision; | |
| return sprintf(buf, "%d.%d\n", (rev >> 8) & 0xff, (rev >> 4) & 0xf); | |
| } | |
| static DEVICE_ATTR_RO(usb_typec_revision); | |
| static ssize_t usb_power_delivery_revision_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct typec_port *p = to_typec_port(dev); | |
| return sprintf(buf, "%d\n", (p->cap->pd_revision >> 8) & 0xff); | |
| } | |
| static DEVICE_ATTR_RO(usb_power_delivery_revision); | |
| static struct attribute *typec_attrs[] = { | |
| &dev_attr_data_role.attr, | |
| &dev_attr_power_operation_mode.attr, | |
| &dev_attr_power_role.attr, | |
| &dev_attr_preferred_role.attr, | |
| &dev_attr_supported_accessory_modes.attr, | |
| &dev_attr_usb_power_delivery_revision.attr, | |
| &dev_attr_usb_typec_revision.attr, | |
| &dev_attr_vconn_source.attr, | |
| &dev_attr_port_type.attr, | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(typec); | |
| static int typec_uevent(struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| int ret; | |
| ret = add_uevent_var(env, "TYPEC_PORT=%s", dev_name(dev)); | |
| if (ret) | |
| dev_err(dev, "failed to add uevent TYPEC_PORT\n"); | |
| return ret; | |
| } | |
| static void typec_release(struct device *dev) | |
| { | |
| struct typec_port *port = to_typec_port(dev); | |
| ida_simple_remove(&typec_index_ida, port->id); | |
| ida_destroy(&port->mode_ids); | |
| typec_switch_put(port->sw); | |
| typec_mux_put(port->mux); | |
| kfree(port); | |
| } | |
| const struct device_type typec_port_dev_type = { | |
| .name = "typec_port", | |
| .groups = typec_groups, | |
| .uevent = typec_uevent, | |
| .release = typec_release, | |
| }; | |
| /* --------------------------------------- */ | |
| /* Driver callbacks to report role updates */ | |
| /** | |
| * typec_set_data_role - Report data role change | |
| * @port: The USB Type-C Port where the role was changed | |
| * @role: The new data role | |
| * | |
| * This routine is used by the port drivers to report data role changes. | |
| */ | |
| void typec_set_data_role(struct typec_port *port, enum typec_data_role role) | |
| { | |
| if (port->data_role == role) | |
| return; | |
| port->data_role = role; | |
| sysfs_notify(&port->dev.kobj, NULL, "data_role"); | |
| kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_set_data_role); | |
| /** | |
| * typec_set_pwr_role - Report power role change | |
| * @port: The USB Type-C Port where the role was changed | |
| * @role: The new data role | |
| * | |
| * This routine is used by the port drivers to report power role changes. | |
| */ | |
| void typec_set_pwr_role(struct typec_port *port, enum typec_role role) | |
| { | |
| if (port->pwr_role == role) | |
| return; | |
| port->pwr_role = role; | |
| sysfs_notify(&port->dev.kobj, NULL, "power_role"); | |
| kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_set_pwr_role); | |
| /** | |
| * typec_set_vconn_role - Report VCONN source change | |
| * @port: The USB Type-C Port which VCONN role changed | |
| * @role: Source when @port is sourcing VCONN, or Sink when it's not | |
| * | |
| * This routine is used by the port drivers to report if the VCONN source is | |
| * changes. | |
| */ | |
| void typec_set_vconn_role(struct typec_port *port, enum typec_role role) | |
| { | |
| if (port->vconn_role == role) | |
| return; | |
| port->vconn_role = role; | |
| sysfs_notify(&port->dev.kobj, NULL, "vconn_source"); | |
| kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_set_vconn_role); | |
| static int partner_match(struct device *dev, void *data) | |
| { | |
| return is_typec_partner(dev); | |
| } | |
| /** | |
| * typec_set_pwr_opmode - Report changed power operation mode | |
| * @port: The USB Type-C Port where the mode was changed | |
| * @opmode: New power operation mode | |
| * | |
| * This routine is used by the port drivers to report changed power operation | |
| * mode in @port. The modes are USB (default), 1.5A, 3.0A as defined in USB | |
| * Type-C specification, and "USB Power Delivery" when the power levels are | |
| * negotiated with methods defined in USB Power Delivery specification. | |
| */ | |
| void typec_set_pwr_opmode(struct typec_port *port, | |
| enum typec_pwr_opmode opmode) | |
| { | |
| struct device *partner_dev; | |
| if (port->pwr_opmode == opmode) | |
| return; | |
| port->pwr_opmode = opmode; | |
| sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode"); | |
| kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); | |
| partner_dev = device_find_child(&port->dev, NULL, partner_match); | |
| if (partner_dev) { | |
| struct typec_partner *partner = to_typec_partner(partner_dev); | |
| if (opmode == TYPEC_PWR_MODE_PD && !partner->usb_pd) { | |
| partner->usb_pd = 1; | |
| sysfs_notify(&partner_dev->kobj, NULL, | |
| "supports_usb_power_delivery"); | |
| } | |
| put_device(partner_dev); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(typec_set_pwr_opmode); | |
| /** | |
| * typec_find_port_power_role - Get the typec port power capability | |
| * @name: port power capability string | |
| * | |
| * This routine is used to find the typec_port_type by its string name. | |
| * | |
| * Returns typec_port_type if success, otherwise negative error code. | |
| */ | |
| int typec_find_port_power_role(const char *name) | |
| { | |
| return match_string(typec_port_power_roles, | |
| ARRAY_SIZE(typec_port_power_roles), name); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_find_port_power_role); | |
| /** | |
| * typec_find_power_role - Find the typec one specific power role | |
| * @name: power role string | |
| * | |
| * This routine is used to find the typec_role by its string name. | |
| * | |
| * Returns typec_role if success, otherwise negative error code. | |
| */ | |
| int typec_find_power_role(const char *name) | |
| { | |
| return match_string(typec_roles, ARRAY_SIZE(typec_roles), name); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_find_power_role); | |
| /** | |
| * typec_find_port_data_role - Get the typec port data capability | |
| * @name: port data capability string | |
| * | |
| * This routine is used to find the typec_port_data by its string name. | |
| * | |
| * Returns typec_port_data if success, otherwise negative error code. | |
| */ | |
| int typec_find_port_data_role(const char *name) | |
| { | |
| return match_string(typec_port_data_roles, | |
| ARRAY_SIZE(typec_port_data_roles), name); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_find_port_data_role); | |
| /* ------------------------------------------ */ | |
| /* API for Multiplexer/DeMultiplexer Switches */ | |
| /** | |
| * typec_set_orientation - Set USB Type-C cable plug orientation | |
| * @port: USB Type-C Port | |
| * @orientation: USB Type-C cable plug orientation | |
| * | |
| * Set cable plug orientation for @port. | |
| */ | |
| int typec_set_orientation(struct typec_port *port, | |
| enum typec_orientation orientation) | |
| { | |
| int ret; | |
| if (port->sw) { | |
| ret = port->sw->set(port->sw, orientation); | |
| if (ret) | |
| return ret; | |
| } | |
| port->orientation = orientation; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_set_orientation); | |
| /** | |
| * typec_get_orientation - Get USB Type-C cable plug orientation | |
| * @port: USB Type-C Port | |
| * | |
| * Get current cable plug orientation for @port. | |
| */ | |
| enum typec_orientation typec_get_orientation(struct typec_port *port) | |
| { | |
| return port->orientation; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_get_orientation); | |
| /** | |
| * typec_set_mode - Set mode of operation for USB Type-C connector | |
| * @port: USB Type-C connector | |
| * @mode: Accessory Mode, USB Operation or Safe State | |
| * | |
| * Configure @port for Accessory Mode @mode. This function will configure the | |
| * muxes needed for @mode. | |
| */ | |
| int typec_set_mode(struct typec_port *port, int mode) | |
| { | |
| return port->mux ? port->mux->set(port->mux, mode) : 0; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_set_mode); | |
| /* --------------------------------------- */ | |
| /** | |
| * typec_port_register_altmode - Register USB Type-C Port Alternate Mode | |
| * @port: USB Type-C Port that supports the alternate mode | |
| * @desc: Description of the alternate mode | |
| * | |
| * This routine is used to register an alternate mode that @port is capable of | |
| * supporting. | |
| * | |
| * Returns handle to the alternate mode on success or ERR_PTR on failure. | |
| */ | |
| struct typec_altmode * | |
| typec_port_register_altmode(struct typec_port *port, | |
| const struct typec_altmode_desc *desc) | |
| { | |
| struct typec_altmode *adev; | |
| struct typec_mux *mux; | |
| mux = typec_mux_get(&port->dev, desc); | |
| if (IS_ERR(mux)) | |
| return ERR_CAST(mux); | |
| adev = typec_register_altmode(&port->dev, desc); | |
| if (IS_ERR(adev)) | |
| typec_mux_put(mux); | |
| else | |
| to_altmode(adev)->mux = mux; | |
| return adev; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_port_register_altmode); | |
| /** | |
| * typec_register_port - Register a USB Type-C Port | |
| * @parent: Parent device | |
| * @cap: Description of the port | |
| * | |
| * Registers a device for USB Type-C Port described in @cap. | |
| * | |
| * Returns handle to the port on success or ERR_PTR on failure. | |
| */ | |
| struct typec_port *typec_register_port(struct device *parent, | |
| const struct typec_capability *cap) | |
| { | |
| struct typec_port *port; | |
| int ret; | |
| int id; | |
| port = kzalloc(sizeof(*port), GFP_KERNEL); | |
| if (!port) | |
| return ERR_PTR(-ENOMEM); | |
| id = ida_simple_get(&typec_index_ida, 0, 0, GFP_KERNEL); | |
| if (id < 0) { | |
| kfree(port); | |
| return ERR_PTR(id); | |
| } | |
| switch (cap->type) { | |
| case TYPEC_PORT_SRC: | |
| port->pwr_role = TYPEC_SOURCE; | |
| port->vconn_role = TYPEC_SOURCE; | |
| break; | |
| case TYPEC_PORT_SNK: | |
| port->pwr_role = TYPEC_SINK; | |
| port->vconn_role = TYPEC_SINK; | |
| break; | |
| case TYPEC_PORT_DRP: | |
| if (cap->prefer_role != TYPEC_NO_PREFERRED_ROLE) | |
| port->pwr_role = cap->prefer_role; | |
| else | |
| port->pwr_role = TYPEC_SINK; | |
| break; | |
| } | |
| switch (cap->data) { | |
| case TYPEC_PORT_DFP: | |
| port->data_role = TYPEC_HOST; | |
| break; | |
| case TYPEC_PORT_UFP: | |
| port->data_role = TYPEC_DEVICE; | |
| break; | |
| case TYPEC_PORT_DRD: | |
| if (cap->prefer_role == TYPEC_SOURCE) | |
| port->data_role = TYPEC_HOST; | |
| else | |
| port->data_role = TYPEC_DEVICE; | |
| break; | |
| } | |
| ida_init(&port->mode_ids); | |
| mutex_init(&port->port_type_lock); | |
| port->id = id; | |
| port->cap = cap; | |
| port->port_type = cap->type; | |
| port->prefer_role = cap->prefer_role; | |
| device_initialize(&port->dev); | |
| port->dev.class = typec_class; | |
| port->dev.parent = parent; | |
| port->dev.fwnode = cap->fwnode; | |
| port->dev.type = &typec_port_dev_type; | |
| dev_set_name(&port->dev, "port%d", id); | |
| port->sw = typec_switch_get(&port->dev); | |
| if (IS_ERR(port->sw)) { | |
| put_device(&port->dev); | |
| return ERR_CAST(port->sw); | |
| } | |
| port->mux = typec_mux_get(&port->dev, NULL); | |
| if (IS_ERR(port->mux)) { | |
| put_device(&port->dev); | |
| return ERR_CAST(port->mux); | |
| } | |
| ret = device_add(&port->dev); | |
| if (ret) { | |
| dev_err(parent, "failed to register port (%d)\n", ret); | |
| put_device(&port->dev); | |
| return ERR_PTR(ret); | |
| } | |
| return port; | |
| } | |
| EXPORT_SYMBOL_GPL(typec_register_port); | |
| /** | |
| * typec_unregister_port - Unregister a USB Type-C Port | |
| * @port: The port to be unregistered | |
| * | |
| * Unregister device created with typec_register_port(). | |
| */ | |
| void typec_unregister_port(struct typec_port *port) | |
| { | |
| if (!IS_ERR_OR_NULL(port)) | |
| device_unregister(&port->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(typec_unregister_port); | |
| static int __init typec_init(void) | |
| { | |
| int ret; | |
| ret = bus_register(&typec_bus); | |
| if (ret) | |
| return ret; | |
| ret = class_register(&typec_mux_class); | |
| if (ret) | |
| goto err_unregister_bus; | |
| typec_class = class_create(THIS_MODULE, "typec"); | |
| if (IS_ERR(typec_class)) { | |
| ret = PTR_ERR(typec_class); | |
| goto err_unregister_mux_class; | |
| } | |
| return 0; | |
| err_unregister_mux_class: | |
| class_unregister(&typec_mux_class); | |
| err_unregister_bus: | |
| bus_unregister(&typec_bus); | |
| return ret; | |
| } | |
| subsys_initcall(typec_init); | |
| static void __exit typec_exit(void) | |
| { | |
| class_destroy(typec_class); | |
| ida_destroy(&typec_index_ida); | |
| bus_unregister(&typec_bus); | |
| class_unregister(&typec_mux_class); | |
| } | |
| module_exit(typec_exit); | |
| MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("USB Type-C Connector Class"); |