| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Shared application/kernel submission and completion ring pairs, for | |
| * supporting fast/efficient IO. | |
| * | |
| * A note on the read/write ordering memory barriers that are matched between | |
| * the application and kernel side. | |
| * | |
| * After the application reads the CQ ring tail, it must use an | |
| * appropriate smp_rmb() to pair with the smp_wmb() the kernel uses | |
| * before writing the tail (using smp_load_acquire to read the tail will | |
| * do). It also needs a smp_mb() before updating CQ head (ordering the | |
| * entry load(s) with the head store), pairing with an implicit barrier | |
| * through a control-dependency in io_get_cqring (smp_store_release to | |
| * store head will do). Failure to do so could lead to reading invalid | |
| * CQ entries. | |
| * | |
| * Likewise, the application must use an appropriate smp_wmb() before | |
| * writing the SQ tail (ordering SQ entry stores with the tail store), | |
| * which pairs with smp_load_acquire in io_get_sqring (smp_store_release | |
| * to store the tail will do). And it needs a barrier ordering the SQ | |
| * head load before writing new SQ entries (smp_load_acquire to read | |
| * head will do). | |
| * | |
| * When using the SQ poll thread (IORING_SETUP_SQPOLL), the application | |
| * needs to check the SQ flags for IORING_SQ_NEED_WAKEUP *after* | |
| * updating the SQ tail; a full memory barrier smp_mb() is needed | |
| * between. | |
| * | |
| * Also see the examples in the liburing library: | |
| * | |
| * git://git.kernel.dk/liburing | |
| * | |
| * io_uring also uses READ/WRITE_ONCE() for _any_ store or load that happens | |
| * from data shared between the kernel and application. This is done both | |
| * for ordering purposes, but also to ensure that once a value is loaded from | |
| * data that the application could potentially modify, it remains stable. | |
| * | |
| * Copyright (C) 2018-2019 Jens Axboe | |
| * Copyright (c) 2018-2019 Christoph Hellwig | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/compat.h> | |
| #include <linux/refcount.h> | |
| #include <linux/uio.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/fs.h> | |
| #include <linux/file.h> | |
| #include <linux/fdtable.h> | |
| #include <linux/mm.h> | |
| #include <linux/mman.h> | |
| #include <linux/mmu_context.h> | |
| #include <linux/percpu.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/kthread.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/bvec.h> | |
| #include <linux/net.h> | |
| #include <net/sock.h> | |
| #include <net/af_unix.h> | |
| #include <net/scm.h> | |
| #include <linux/anon_inodes.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/nospec.h> | |
| #include <linux/sizes.h> | |
| #include <linux/hugetlb.h> | |
| #include <uapi/linux/io_uring.h> | |
| #include "internal.h" | |
| #define IORING_MAX_ENTRIES 4096 | |
| #define IORING_MAX_FIXED_FILES 1024 | |
| struct io_uring { | |
| u32 head ____cacheline_aligned_in_smp; | |
| u32 tail ____cacheline_aligned_in_smp; | |
| }; | |
| /* | |
| * This data is shared with the application through the mmap at offset | |
| * IORING_OFF_SQ_RING. | |
| * | |
| * The offsets to the member fields are published through struct | |
| * io_sqring_offsets when calling io_uring_setup. | |
| */ | |
| struct io_sq_ring { | |
| /* | |
| * Head and tail offsets into the ring; the offsets need to be | |
| * masked to get valid indices. | |
| * | |
| * The kernel controls head and the application controls tail. | |
| */ | |
| struct io_uring r; | |
| /* | |
| * Bitmask to apply to head and tail offsets (constant, equals | |
| * ring_entries - 1) | |
| */ | |
| u32 ring_mask; | |
| /* Ring size (constant, power of 2) */ | |
| u32 ring_entries; | |
| /* | |
| * Number of invalid entries dropped by the kernel due to | |
| * invalid index stored in array | |
| * | |
| * Written by the kernel, shouldn't be modified by the | |
| * application (i.e. get number of "new events" by comparing to | |
| * cached value). | |
| * | |
| * After a new SQ head value was read by the application this | |
| * counter includes all submissions that were dropped reaching | |
| * the new SQ head (and possibly more). | |
| */ | |
| u32 dropped; | |
| /* | |
| * Runtime flags | |
| * | |
| * Written by the kernel, shouldn't be modified by the | |
| * application. | |
| * | |
| * The application needs a full memory barrier before checking | |
| * for IORING_SQ_NEED_WAKEUP after updating the sq tail. | |
| */ | |
| u32 flags; | |
| /* | |
| * Ring buffer of indices into array of io_uring_sqe, which is | |
| * mmapped by the application using the IORING_OFF_SQES offset. | |
| * | |
| * This indirection could e.g. be used to assign fixed | |
| * io_uring_sqe entries to operations and only submit them to | |
| * the queue when needed. | |
| * | |
| * The kernel modifies neither the indices array nor the entries | |
| * array. | |
| */ | |
| u32 array[]; | |
| }; | |
| /* | |
| * This data is shared with the application through the mmap at offset | |
| * IORING_OFF_CQ_RING. | |
| * | |
| * The offsets to the member fields are published through struct | |
| * io_cqring_offsets when calling io_uring_setup. | |
| */ | |
| struct io_cq_ring { | |
| /* | |
| * Head and tail offsets into the ring; the offsets need to be | |
| * masked to get valid indices. | |
| * | |
| * The application controls head and the kernel tail. | |
| */ | |
| struct io_uring r; | |
| /* | |
| * Bitmask to apply to head and tail offsets (constant, equals | |
| * ring_entries - 1) | |
| */ | |
| u32 ring_mask; | |
| /* Ring size (constant, power of 2) */ | |
| u32 ring_entries; | |
| /* | |
| * Number of completion events lost because the queue was full; | |
| * this should be avoided by the application by making sure | |
| * there are not more requests pending thatn there is space in | |
| * the completion queue. | |
| * | |
| * Written by the kernel, shouldn't be modified by the | |
| * application (i.e. get number of "new events" by comparing to | |
| * cached value). | |
| * | |
| * As completion events come in out of order this counter is not | |
| * ordered with any other data. | |
| */ | |
| u32 overflow; | |
| /* | |
| * Ring buffer of completion events. | |
| * | |
| * The kernel writes completion events fresh every time they are | |
| * produced, so the application is allowed to modify pending | |
| * entries. | |
| */ | |
| struct io_uring_cqe cqes[]; | |
| }; | |
| struct io_mapped_ubuf { | |
| u64 ubuf; | |
| size_t len; | |
| struct bio_vec *bvec; | |
| unsigned int nr_bvecs; | |
| }; | |
| struct async_list { | |
| spinlock_t lock; | |
| atomic_t cnt; | |
| struct list_head list; | |
| struct file *file; | |
| off_t io_end; | |
| size_t io_pages; | |
| }; | |
| struct io_ring_ctx { | |
| struct { | |
| struct percpu_ref refs; | |
| } ____cacheline_aligned_in_smp; | |
| struct { | |
| unsigned int flags; | |
| bool compat; | |
| bool account_mem; | |
| /* SQ ring */ | |
| struct io_sq_ring *sq_ring; | |
| unsigned cached_sq_head; | |
| unsigned sq_entries; | |
| unsigned sq_mask; | |
| unsigned sq_thread_idle; | |
| struct io_uring_sqe *sq_sqes; | |
| struct list_head defer_list; | |
| } ____cacheline_aligned_in_smp; | |
| /* IO offload */ | |
| struct workqueue_struct *sqo_wq; | |
| struct task_struct *sqo_thread; /* if using sq thread polling */ | |
| struct mm_struct *sqo_mm; | |
| wait_queue_head_t sqo_wait; | |
| struct completion sqo_thread_started; | |
| struct { | |
| /* CQ ring */ | |
| struct io_cq_ring *cq_ring; | |
| unsigned cached_cq_tail; | |
| unsigned cq_entries; | |
| unsigned cq_mask; | |
| struct wait_queue_head cq_wait; | |
| struct fasync_struct *cq_fasync; | |
| struct eventfd_ctx *cq_ev_fd; | |
| } ____cacheline_aligned_in_smp; | |
| /* | |
| * If used, fixed file set. Writers must ensure that ->refs is dead, | |
| * readers must ensure that ->refs is alive as long as the file* is | |
| * used. Only updated through io_uring_register(2). | |
| */ | |
| struct file **user_files; | |
| unsigned nr_user_files; | |
| /* if used, fixed mapped user buffers */ | |
| unsigned nr_user_bufs; | |
| struct io_mapped_ubuf *user_bufs; | |
| struct user_struct *user; | |
| struct completion ctx_done; | |
| struct { | |
| struct mutex uring_lock; | |
| wait_queue_head_t wait; | |
| } ____cacheline_aligned_in_smp; | |
| struct { | |
| spinlock_t completion_lock; | |
| bool poll_multi_file; | |
| /* | |
| * ->poll_list is protected by the ctx->uring_lock for | |
| * io_uring instances that don't use IORING_SETUP_SQPOLL. | |
| * For SQPOLL, only the single threaded io_sq_thread() will | |
| * manipulate the list, hence no extra locking is needed there. | |
| */ | |
| struct list_head poll_list; | |
| struct list_head cancel_list; | |
| } ____cacheline_aligned_in_smp; | |
| struct async_list pending_async[2]; | |
| #if defined(CONFIG_UNIX) | |
| struct socket *ring_sock; | |
| #endif | |
| }; | |
| struct sqe_submit { | |
| const struct io_uring_sqe *sqe; | |
| unsigned short index; | |
| bool has_user; | |
| bool needs_lock; | |
| bool needs_fixed_file; | |
| }; | |
| /* | |
| * First field must be the file pointer in all the | |
| * iocb unions! See also 'struct kiocb' in <linux/fs.h> | |
| */ | |
| struct io_poll_iocb { | |
| struct file *file; | |
| struct wait_queue_head *head; | |
| __poll_t events; | |
| bool done; | |
| bool canceled; | |
| struct wait_queue_entry wait; | |
| }; | |
| /* | |
| * NOTE! Each of the iocb union members has the file pointer | |
| * as the first entry in their struct definition. So you can | |
| * access the file pointer through any of the sub-structs, | |
| * or directly as just 'ki_filp' in this struct. | |
| */ | |
| struct io_kiocb { | |
| union { | |
| struct file *file; | |
| struct kiocb rw; | |
| struct io_poll_iocb poll; | |
| }; | |
| struct sqe_submit submit; | |
| struct io_ring_ctx *ctx; | |
| struct list_head list; | |
| struct list_head link_list; | |
| unsigned int flags; | |
| refcount_t refs; | |
| #define REQ_F_NOWAIT 1 /* must not punt to workers */ | |
| #define REQ_F_IOPOLL_COMPLETED 2 /* polled IO has completed */ | |
| #define REQ_F_FIXED_FILE 4 /* ctx owns file */ | |
| #define REQ_F_SEQ_PREV 8 /* sequential with previous */ | |
| #define REQ_F_IO_DRAIN 16 /* drain existing IO first */ | |
| #define REQ_F_IO_DRAINED 32 /* drain done */ | |
| #define REQ_F_LINK 64 /* linked sqes */ | |
| #define REQ_F_FAIL_LINK 128 /* fail rest of links */ | |
| u64 user_data; | |
| u32 result; | |
| u32 sequence; | |
| struct work_struct work; | |
| }; | |
| #define IO_PLUG_THRESHOLD 2 | |
| #define IO_IOPOLL_BATCH 8 | |
| struct io_submit_state { | |
| struct blk_plug plug; | |
| /* | |
| * io_kiocb alloc cache | |
| */ | |
| void *reqs[IO_IOPOLL_BATCH]; | |
| unsigned int free_reqs; | |
| unsigned int cur_req; | |
| /* | |
| * File reference cache | |
| */ | |
| struct file *file; | |
| unsigned int fd; | |
| unsigned int has_refs; | |
| unsigned int used_refs; | |
| unsigned int ios_left; | |
| }; | |
| static void io_sq_wq_submit_work(struct work_struct *work); | |
| static struct kmem_cache *req_cachep; | |
| static const struct file_operations io_uring_fops; | |
| struct sock *io_uring_get_socket(struct file *file) | |
| { | |
| #if defined(CONFIG_UNIX) | |
| if (file->f_op == &io_uring_fops) { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| return ctx->ring_sock->sk; | |
| } | |
| #endif | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(io_uring_get_socket); | |
| static void io_ring_ctx_ref_free(struct percpu_ref *ref) | |
| { | |
| struct io_ring_ctx *ctx = container_of(ref, struct io_ring_ctx, refs); | |
| complete(&ctx->ctx_done); | |
| } | |
| static struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p) | |
| { | |
| struct io_ring_ctx *ctx; | |
| int i; | |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); | |
| if (!ctx) | |
| return NULL; | |
| if (percpu_ref_init(&ctx->refs, io_ring_ctx_ref_free, | |
| PERCPU_REF_ALLOW_REINIT, GFP_KERNEL)) { | |
| kfree(ctx); | |
| return NULL; | |
| } | |
| ctx->flags = p->flags; | |
| init_waitqueue_head(&ctx->cq_wait); | |
| init_completion(&ctx->ctx_done); | |
| init_completion(&ctx->sqo_thread_started); | |
| mutex_init(&ctx->uring_lock); | |
| init_waitqueue_head(&ctx->wait); | |
| for (i = 0; i < ARRAY_SIZE(ctx->pending_async); i++) { | |
| spin_lock_init(&ctx->pending_async[i].lock); | |
| INIT_LIST_HEAD(&ctx->pending_async[i].list); | |
| atomic_set(&ctx->pending_async[i].cnt, 0); | |
| } | |
| spin_lock_init(&ctx->completion_lock); | |
| INIT_LIST_HEAD(&ctx->poll_list); | |
| INIT_LIST_HEAD(&ctx->cancel_list); | |
| INIT_LIST_HEAD(&ctx->defer_list); | |
| return ctx; | |
| } | |
| static inline bool io_sequence_defer(struct io_ring_ctx *ctx, | |
| struct io_kiocb *req) | |
| { | |
| if ((req->flags & (REQ_F_IO_DRAIN|REQ_F_IO_DRAINED)) != REQ_F_IO_DRAIN) | |
| return false; | |
| return req->sequence > ctx->cached_cq_tail + ctx->sq_ring->dropped; | |
| } | |
| static struct io_kiocb *io_get_deferred_req(struct io_ring_ctx *ctx) | |
| { | |
| struct io_kiocb *req; | |
| if (list_empty(&ctx->defer_list)) | |
| return NULL; | |
| req = list_first_entry(&ctx->defer_list, struct io_kiocb, list); | |
| if (!io_sequence_defer(ctx, req)) { | |
| list_del_init(&req->list); | |
| return req; | |
| } | |
| return NULL; | |
| } | |
| static void __io_commit_cqring(struct io_ring_ctx *ctx) | |
| { | |
| struct io_cq_ring *ring = ctx->cq_ring; | |
| if (ctx->cached_cq_tail != READ_ONCE(ring->r.tail)) { | |
| /* order cqe stores with ring update */ | |
| smp_store_release(&ring->r.tail, ctx->cached_cq_tail); | |
| if (wq_has_sleeper(&ctx->cq_wait)) { | |
| wake_up_interruptible(&ctx->cq_wait); | |
| kill_fasync(&ctx->cq_fasync, SIGIO, POLL_IN); | |
| } | |
| } | |
| } | |
| static void io_commit_cqring(struct io_ring_ctx *ctx) | |
| { | |
| struct io_kiocb *req; | |
| __io_commit_cqring(ctx); | |
| while ((req = io_get_deferred_req(ctx)) != NULL) { | |
| req->flags |= REQ_F_IO_DRAINED; | |
| queue_work(ctx->sqo_wq, &req->work); | |
| } | |
| } | |
| static struct io_uring_cqe *io_get_cqring(struct io_ring_ctx *ctx) | |
| { | |
| struct io_cq_ring *ring = ctx->cq_ring; | |
| unsigned tail; | |
| tail = ctx->cached_cq_tail; | |
| /* | |
| * writes to the cq entry need to come after reading head; the | |
| * control dependency is enough as we're using WRITE_ONCE to | |
| * fill the cq entry | |
| */ | |
| if (tail - READ_ONCE(ring->r.head) == ring->ring_entries) | |
| return NULL; | |
| ctx->cached_cq_tail++; | |
| return &ring->cqes[tail & ctx->cq_mask]; | |
| } | |
| static void io_cqring_fill_event(struct io_ring_ctx *ctx, u64 ki_user_data, | |
| long res) | |
| { | |
| struct io_uring_cqe *cqe; | |
| /* | |
| * If we can't get a cq entry, userspace overflowed the | |
| * submission (by quite a lot). Increment the overflow count in | |
| * the ring. | |
| */ | |
| cqe = io_get_cqring(ctx); | |
| if (cqe) { | |
| WRITE_ONCE(cqe->user_data, ki_user_data); | |
| WRITE_ONCE(cqe->res, res); | |
| WRITE_ONCE(cqe->flags, 0); | |
| } else { | |
| unsigned overflow = READ_ONCE(ctx->cq_ring->overflow); | |
| WRITE_ONCE(ctx->cq_ring->overflow, overflow + 1); | |
| } | |
| } | |
| static void io_cqring_ev_posted(struct io_ring_ctx *ctx) | |
| { | |
| if (waitqueue_active(&ctx->wait)) | |
| wake_up(&ctx->wait); | |
| if (waitqueue_active(&ctx->sqo_wait)) | |
| wake_up(&ctx->sqo_wait); | |
| if (ctx->cq_ev_fd) | |
| eventfd_signal(ctx->cq_ev_fd, 1); | |
| } | |
| static void io_cqring_add_event(struct io_ring_ctx *ctx, u64 user_data, | |
| long res) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&ctx->completion_lock, flags); | |
| io_cqring_fill_event(ctx, user_data, res); | |
| io_commit_cqring(ctx); | |
| spin_unlock_irqrestore(&ctx->completion_lock, flags); | |
| io_cqring_ev_posted(ctx); | |
| } | |
| static void io_ring_drop_ctx_refs(struct io_ring_ctx *ctx, unsigned refs) | |
| { | |
| percpu_ref_put_many(&ctx->refs, refs); | |
| if (waitqueue_active(&ctx->wait)) | |
| wake_up(&ctx->wait); | |
| } | |
| static struct io_kiocb *io_get_req(struct io_ring_ctx *ctx, | |
| struct io_submit_state *state) | |
| { | |
| gfp_t gfp = GFP_KERNEL | __GFP_NOWARN; | |
| struct io_kiocb *req; | |
| if (!percpu_ref_tryget(&ctx->refs)) | |
| return NULL; | |
| if (!state) { | |
| req = kmem_cache_alloc(req_cachep, gfp); | |
| if (unlikely(!req)) | |
| goto out; | |
| } else if (!state->free_reqs) { | |
| size_t sz; | |
| int ret; | |
| sz = min_t(size_t, state->ios_left, ARRAY_SIZE(state->reqs)); | |
| ret = kmem_cache_alloc_bulk(req_cachep, gfp, sz, state->reqs); | |
| /* | |
| * Bulk alloc is all-or-nothing. If we fail to get a batch, | |
| * retry single alloc to be on the safe side. | |
| */ | |
| if (unlikely(ret <= 0)) { | |
| state->reqs[0] = kmem_cache_alloc(req_cachep, gfp); | |
| if (!state->reqs[0]) | |
| goto out; | |
| ret = 1; | |
| } | |
| state->free_reqs = ret - 1; | |
| state->cur_req = 1; | |
| req = state->reqs[0]; | |
| } else { | |
| req = state->reqs[state->cur_req]; | |
| state->free_reqs--; | |
| state->cur_req++; | |
| } | |
| req->file = NULL; | |
| req->ctx = ctx; | |
| req->flags = 0; | |
| /* one is dropped after submission, the other at completion */ | |
| refcount_set(&req->refs, 2); | |
| req->result = 0; | |
| return req; | |
| out: | |
| io_ring_drop_ctx_refs(ctx, 1); | |
| return NULL; | |
| } | |
| static void io_free_req_many(struct io_ring_ctx *ctx, void **reqs, int *nr) | |
| { | |
| if (*nr) { | |
| kmem_cache_free_bulk(req_cachep, *nr, reqs); | |
| io_ring_drop_ctx_refs(ctx, *nr); | |
| *nr = 0; | |
| } | |
| } | |
| static void __io_free_req(struct io_kiocb *req) | |
| { | |
| if (req->file && !(req->flags & REQ_F_FIXED_FILE)) | |
| fput(req->file); | |
| io_ring_drop_ctx_refs(req->ctx, 1); | |
| kmem_cache_free(req_cachep, req); | |
| } | |
| static void io_req_link_next(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *nxt; | |
| /* | |
| * The list should never be empty when we are called here. But could | |
| * potentially happen if the chain is messed up, check to be on the | |
| * safe side. | |
| */ | |
| nxt = list_first_entry_or_null(&req->link_list, struct io_kiocb, list); | |
| if (nxt) { | |
| list_del(&nxt->list); | |
| if (!list_empty(&req->link_list)) { | |
| INIT_LIST_HEAD(&nxt->link_list); | |
| list_splice(&req->link_list, &nxt->link_list); | |
| nxt->flags |= REQ_F_LINK; | |
| } | |
| INIT_WORK(&nxt->work, io_sq_wq_submit_work); | |
| queue_work(req->ctx->sqo_wq, &nxt->work); | |
| } | |
| } | |
| /* | |
| * Called if REQ_F_LINK is set, and we fail the head request | |
| */ | |
| static void io_fail_links(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *link; | |
| while (!list_empty(&req->link_list)) { | |
| link = list_first_entry(&req->link_list, struct io_kiocb, list); | |
| list_del(&link->list); | |
| io_cqring_add_event(req->ctx, link->user_data, -ECANCELED); | |
| __io_free_req(link); | |
| } | |
| } | |
| static void io_free_req(struct io_kiocb *req) | |
| { | |
| /* | |
| * If LINK is set, we have dependent requests in this chain. If we | |
| * didn't fail this request, queue the first one up, moving any other | |
| * dependencies to the next request. In case of failure, fail the rest | |
| * of the chain. | |
| */ | |
| if (req->flags & REQ_F_LINK) { | |
| if (req->flags & REQ_F_FAIL_LINK) | |
| io_fail_links(req); | |
| else | |
| io_req_link_next(req); | |
| } | |
| __io_free_req(req); | |
| } | |
| static void io_put_req(struct io_kiocb *req) | |
| { | |
| if (refcount_dec_and_test(&req->refs)) | |
| io_free_req(req); | |
| } | |
| /* | |
| * Find and free completed poll iocbs | |
| */ | |
| static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events, | |
| struct list_head *done) | |
| { | |
| void *reqs[IO_IOPOLL_BATCH]; | |
| struct io_kiocb *req; | |
| int to_free; | |
| to_free = 0; | |
| while (!list_empty(done)) { | |
| req = list_first_entry(done, struct io_kiocb, list); | |
| list_del(&req->list); | |
| io_cqring_fill_event(ctx, req->user_data, req->result); | |
| (*nr_events)++; | |
| if (refcount_dec_and_test(&req->refs)) { | |
| /* If we're not using fixed files, we have to pair the | |
| * completion part with the file put. Use regular | |
| * completions for those, only batch free for fixed | |
| * file and non-linked commands. | |
| */ | |
| if ((req->flags & (REQ_F_FIXED_FILE|REQ_F_LINK)) == | |
| REQ_F_FIXED_FILE) { | |
| reqs[to_free++] = req; | |
| if (to_free == ARRAY_SIZE(reqs)) | |
| io_free_req_many(ctx, reqs, &to_free); | |
| } else { | |
| io_free_req(req); | |
| } | |
| } | |
| } | |
| io_commit_cqring(ctx); | |
| io_free_req_many(ctx, reqs, &to_free); | |
| } | |
| static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events, | |
| long min) | |
| { | |
| struct io_kiocb *req, *tmp; | |
| LIST_HEAD(done); | |
| bool spin; | |
| int ret; | |
| /* | |
| * Only spin for completions if we don't have multiple devices hanging | |
| * off our complete list, and we're under the requested amount. | |
| */ | |
| spin = !ctx->poll_multi_file && *nr_events < min; | |
| ret = 0; | |
| list_for_each_entry_safe(req, tmp, &ctx->poll_list, list) { | |
| struct kiocb *kiocb = &req->rw; | |
| /* | |
| * Move completed entries to our local list. If we find a | |
| * request that requires polling, break out and complete | |
| * the done list first, if we have entries there. | |
| */ | |
| if (req->flags & REQ_F_IOPOLL_COMPLETED) { | |
| list_move_tail(&req->list, &done); | |
| continue; | |
| } | |
| if (!list_empty(&done)) | |
| break; | |
| ret = kiocb->ki_filp->f_op->iopoll(kiocb, spin); | |
| if (ret < 0) | |
| break; | |
| if (ret && spin) | |
| spin = false; | |
| ret = 0; | |
| } | |
| if (!list_empty(&done)) | |
| io_iopoll_complete(ctx, nr_events, &done); | |
| return ret; | |
| } | |
| /* | |
| * Poll for a mininum of 'min' events. Note that if min == 0 we consider that a | |
| * non-spinning poll check - we'll still enter the driver poll loop, but only | |
| * as a non-spinning completion check. | |
| */ | |
| static int io_iopoll_getevents(struct io_ring_ctx *ctx, unsigned int *nr_events, | |
| long min) | |
| { | |
| while (!list_empty(&ctx->poll_list)) { | |
| int ret; | |
| ret = io_do_iopoll(ctx, nr_events, min); | |
| if (ret < 0) | |
| return ret; | |
| if (!min || *nr_events >= min) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * We can't just wait for polled events to come to us, we have to actively | |
| * find and complete them. | |
| */ | |
| static void io_iopoll_reap_events(struct io_ring_ctx *ctx) | |
| { | |
| if (!(ctx->flags & IORING_SETUP_IOPOLL)) | |
| return; | |
| mutex_lock(&ctx->uring_lock); | |
| while (!list_empty(&ctx->poll_list)) { | |
| unsigned int nr_events = 0; | |
| io_iopoll_getevents(ctx, &nr_events, 1); | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| static int io_iopoll_check(struct io_ring_ctx *ctx, unsigned *nr_events, | |
| long min) | |
| { | |
| int ret = 0; | |
| do { | |
| int tmin = 0; | |
| if (*nr_events < min) | |
| tmin = min - *nr_events; | |
| ret = io_iopoll_getevents(ctx, nr_events, tmin); | |
| if (ret <= 0) | |
| break; | |
| ret = 0; | |
| } while (min && !*nr_events && !need_resched()); | |
| return ret; | |
| } | |
| static void kiocb_end_write(struct kiocb *kiocb) | |
| { | |
| if (kiocb->ki_flags & IOCB_WRITE) { | |
| struct inode *inode = file_inode(kiocb->ki_filp); | |
| /* | |
| * Tell lockdep we inherited freeze protection from submission | |
| * thread. | |
| */ | |
| if (S_ISREG(inode->i_mode)) | |
| __sb_writers_acquired(inode->i_sb, SB_FREEZE_WRITE); | |
| file_end_write(kiocb->ki_filp); | |
| } | |
| } | |
| static void io_complete_rw(struct kiocb *kiocb, long res, long res2) | |
| { | |
| struct io_kiocb *req = container_of(kiocb, struct io_kiocb, rw); | |
| kiocb_end_write(kiocb); | |
| if ((req->flags & REQ_F_LINK) && res != req->result) | |
| req->flags |= REQ_F_FAIL_LINK; | |
| io_cqring_add_event(req->ctx, req->user_data, res); | |
| io_put_req(req); | |
| } | |
| static void io_complete_rw_iopoll(struct kiocb *kiocb, long res, long res2) | |
| { | |
| struct io_kiocb *req = container_of(kiocb, struct io_kiocb, rw); | |
| kiocb_end_write(kiocb); | |
| if ((req->flags & REQ_F_LINK) && res != req->result) | |
| req->flags |= REQ_F_FAIL_LINK; | |
| req->result = res; | |
| if (res != -EAGAIN) | |
| req->flags |= REQ_F_IOPOLL_COMPLETED; | |
| } | |
| /* | |
| * After the iocb has been issued, it's safe to be found on the poll list. | |
| * Adding the kiocb to the list AFTER submission ensures that we don't | |
| * find it from a io_iopoll_getevents() thread before the issuer is done | |
| * accessing the kiocb cookie. | |
| */ | |
| static void io_iopoll_req_issued(struct io_kiocb *req) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| /* | |
| * Track whether we have multiple files in our lists. This will impact | |
| * how we do polling eventually, not spinning if we're on potentially | |
| * different devices. | |
| */ | |
| if (list_empty(&ctx->poll_list)) { | |
| ctx->poll_multi_file = false; | |
| } else if (!ctx->poll_multi_file) { | |
| struct io_kiocb *list_req; | |
| list_req = list_first_entry(&ctx->poll_list, struct io_kiocb, | |
| list); | |
| if (list_req->rw.ki_filp != req->rw.ki_filp) | |
| ctx->poll_multi_file = true; | |
| } | |
| /* | |
| * For fast devices, IO may have already completed. If it has, add | |
| * it to the front so we find it first. | |
| */ | |
| if (req->flags & REQ_F_IOPOLL_COMPLETED) | |
| list_add(&req->list, &ctx->poll_list); | |
| else | |
| list_add_tail(&req->list, &ctx->poll_list); | |
| } | |
| static void io_file_put(struct io_submit_state *state) | |
| { | |
| if (state->file) { | |
| int diff = state->has_refs - state->used_refs; | |
| if (diff) | |
| fput_many(state->file, diff); | |
| state->file = NULL; | |
| } | |
| } | |
| /* | |
| * Get as many references to a file as we have IOs left in this submission, | |
| * assuming most submissions are for one file, or at least that each file | |
| * has more than one submission. | |
| */ | |
| static struct file *io_file_get(struct io_submit_state *state, int fd) | |
| { | |
| if (!state) | |
| return fget(fd); | |
| if (state->file) { | |
| if (state->fd == fd) { | |
| state->used_refs++; | |
| state->ios_left--; | |
| return state->file; | |
| } | |
| io_file_put(state); | |
| } | |
| state->file = fget_many(fd, state->ios_left); | |
| if (!state->file) | |
| return NULL; | |
| state->fd = fd; | |
| state->has_refs = state->ios_left; | |
| state->used_refs = 1; | |
| state->ios_left--; | |
| return state->file; | |
| } | |
| /* | |
| * If we tracked the file through the SCM inflight mechanism, we could support | |
| * any file. For now, just ensure that anything potentially problematic is done | |
| * inline. | |
| */ | |
| static bool io_file_supports_async(struct file *file) | |
| { | |
| umode_t mode = file_inode(file)->i_mode; | |
| if (S_ISBLK(mode) || S_ISCHR(mode)) | |
| return true; | |
| if (S_ISREG(mode) && file->f_op != &io_uring_fops) | |
| return true; | |
| return false; | |
| } | |
| static int io_prep_rw(struct io_kiocb *req, const struct sqe_submit *s, | |
| bool force_nonblock) | |
| { | |
| const struct io_uring_sqe *sqe = s->sqe; | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct kiocb *kiocb = &req->rw; | |
| unsigned ioprio; | |
| int ret; | |
| if (!req->file) | |
| return -EBADF; | |
| if (force_nonblock && !io_file_supports_async(req->file)) | |
| force_nonblock = false; | |
| kiocb->ki_pos = READ_ONCE(sqe->off); | |
| kiocb->ki_flags = iocb_flags(kiocb->ki_filp); | |
| kiocb->ki_hint = ki_hint_validate(file_write_hint(kiocb->ki_filp)); | |
| ioprio = READ_ONCE(sqe->ioprio); | |
| if (ioprio) { | |
| ret = ioprio_check_cap(ioprio); | |
| if (ret) | |
| return ret; | |
| kiocb->ki_ioprio = ioprio; | |
| } else | |
| kiocb->ki_ioprio = get_current_ioprio(); | |
| ret = kiocb_set_rw_flags(kiocb, READ_ONCE(sqe->rw_flags)); | |
| if (unlikely(ret)) | |
| return ret; | |
| /* don't allow async punt if RWF_NOWAIT was requested */ | |
| if (kiocb->ki_flags & IOCB_NOWAIT) | |
| req->flags |= REQ_F_NOWAIT; | |
| if (force_nonblock) | |
| kiocb->ki_flags |= IOCB_NOWAIT; | |
| if (ctx->flags & IORING_SETUP_IOPOLL) { | |
| if (!(kiocb->ki_flags & IOCB_DIRECT) || | |
| !kiocb->ki_filp->f_op->iopoll) | |
| return -EOPNOTSUPP; | |
| kiocb->ki_flags |= IOCB_HIPRI; | |
| kiocb->ki_complete = io_complete_rw_iopoll; | |
| } else { | |
| if (kiocb->ki_flags & IOCB_HIPRI) | |
| return -EINVAL; | |
| kiocb->ki_complete = io_complete_rw; | |
| } | |
| return 0; | |
| } | |
| static inline void io_rw_done(struct kiocb *kiocb, ssize_t ret) | |
| { | |
| switch (ret) { | |
| case -EIOCBQUEUED: | |
| break; | |
| case -ERESTARTSYS: | |
| case -ERESTARTNOINTR: | |
| case -ERESTARTNOHAND: | |
| case -ERESTART_RESTARTBLOCK: | |
| /* | |
| * We can't just restart the syscall, since previously | |
| * submitted sqes may already be in progress. Just fail this | |
| * IO with EINTR. | |
| */ | |
| ret = -EINTR; | |
| /* fall through */ | |
| default: | |
| kiocb->ki_complete(kiocb, ret, 0); | |
| } | |
| } | |
| static int io_import_fixed(struct io_ring_ctx *ctx, int rw, | |
| const struct io_uring_sqe *sqe, | |
| struct iov_iter *iter) | |
| { | |
| size_t len = READ_ONCE(sqe->len); | |
| struct io_mapped_ubuf *imu; | |
| unsigned index, buf_index; | |
| size_t offset; | |
| u64 buf_addr; | |
| /* attempt to use fixed buffers without having provided iovecs */ | |
| if (unlikely(!ctx->user_bufs)) | |
| return -EFAULT; | |
| buf_index = READ_ONCE(sqe->buf_index); | |
| if (unlikely(buf_index >= ctx->nr_user_bufs)) | |
| return -EFAULT; | |
| index = array_index_nospec(buf_index, ctx->nr_user_bufs); | |
| imu = &ctx->user_bufs[index]; | |
| buf_addr = READ_ONCE(sqe->addr); | |
| /* overflow */ | |
| if (buf_addr + len < buf_addr) | |
| return -EFAULT; | |
| /* not inside the mapped region */ | |
| if (buf_addr < imu->ubuf || buf_addr + len > imu->ubuf + imu->len) | |
| return -EFAULT; | |
| /* | |
| * May not be a start of buffer, set size appropriately | |
| * and advance us to the beginning. | |
| */ | |
| offset = buf_addr - imu->ubuf; | |
| iov_iter_bvec(iter, rw, imu->bvec, imu->nr_bvecs, offset + len); | |
| if (offset) | |
| iov_iter_advance(iter, offset); | |
| return 0; | |
| } | |
| static ssize_t io_import_iovec(struct io_ring_ctx *ctx, int rw, | |
| const struct sqe_submit *s, struct iovec **iovec, | |
| struct iov_iter *iter) | |
| { | |
| const struct io_uring_sqe *sqe = s->sqe; | |
| void __user *buf = u64_to_user_ptr(READ_ONCE(sqe->addr)); | |
| size_t sqe_len = READ_ONCE(sqe->len); | |
| u8 opcode; | |
| /* | |
| * We're reading ->opcode for the second time, but the first read | |
| * doesn't care whether it's _FIXED or not, so it doesn't matter | |
| * whether ->opcode changes concurrently. The first read does care | |
| * about whether it is a READ or a WRITE, so we don't trust this read | |
| * for that purpose and instead let the caller pass in the read/write | |
| * flag. | |
| */ | |
| opcode = READ_ONCE(sqe->opcode); | |
| if (opcode == IORING_OP_READ_FIXED || | |
| opcode == IORING_OP_WRITE_FIXED) { | |
| ssize_t ret = io_import_fixed(ctx, rw, sqe, iter); | |
| *iovec = NULL; | |
| return ret; | |
| } | |
| if (!s->has_user) | |
| return -EFAULT; | |
| #ifdef CONFIG_COMPAT | |
| if (ctx->compat) | |
| return compat_import_iovec(rw, buf, sqe_len, UIO_FASTIOV, | |
| iovec, iter); | |
| #endif | |
| return import_iovec(rw, buf, sqe_len, UIO_FASTIOV, iovec, iter); | |
| } | |
| /* | |
| * Make a note of the last file/offset/direction we punted to async | |
| * context. We'll use this information to see if we can piggy back a | |
| * sequential request onto the previous one, if it's still hasn't been | |
| * completed by the async worker. | |
| */ | |
| static void io_async_list_note(int rw, struct io_kiocb *req, size_t len) | |
| { | |
| struct async_list *async_list = &req->ctx->pending_async[rw]; | |
| struct kiocb *kiocb = &req->rw; | |
| struct file *filp = kiocb->ki_filp; | |
| off_t io_end = kiocb->ki_pos + len; | |
| if (filp == async_list->file && kiocb->ki_pos == async_list->io_end) { | |
| unsigned long max_pages; | |
| /* Use 8x RA size as a decent limiter for both reads/writes */ | |
| max_pages = filp->f_ra.ra_pages; | |
| if (!max_pages) | |
| max_pages = VM_READAHEAD_PAGES; | |
| max_pages *= 8; | |
| /* If max pages are exceeded, reset the state */ | |
| len >>= PAGE_SHIFT; | |
| if (async_list->io_pages + len <= max_pages) { | |
| req->flags |= REQ_F_SEQ_PREV; | |
| async_list->io_pages += len; | |
| } else { | |
| io_end = 0; | |
| async_list->io_pages = 0; | |
| } | |
| } | |
| /* New file? Reset state. */ | |
| if (async_list->file != filp) { | |
| async_list->io_pages = 0; | |
| async_list->file = filp; | |
| } | |
| async_list->io_end = io_end; | |
| } | |
| static int io_read(struct io_kiocb *req, const struct sqe_submit *s, | |
| bool force_nonblock) | |
| { | |
| struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; | |
| struct kiocb *kiocb = &req->rw; | |
| struct iov_iter iter; | |
| struct file *file; | |
| size_t iov_count; | |
| ssize_t read_size, ret; | |
| ret = io_prep_rw(req, s, force_nonblock); | |
| if (ret) | |
| return ret; | |
| file = kiocb->ki_filp; | |
| if (unlikely(!(file->f_mode & FMODE_READ))) | |
| return -EBADF; | |
| if (unlikely(!file->f_op->read_iter)) | |
| return -EINVAL; | |
| ret = io_import_iovec(req->ctx, READ, s, &iovec, &iter); | |
| if (ret < 0) | |
| return ret; | |
| read_size = ret; | |
| if (req->flags & REQ_F_LINK) | |
| req->result = read_size; | |
| iov_count = iov_iter_count(&iter); | |
| ret = rw_verify_area(READ, file, &kiocb->ki_pos, iov_count); | |
| if (!ret) { | |
| ssize_t ret2; | |
| ret2 = call_read_iter(file, kiocb, &iter); | |
| /* | |
| * In case of a short read, punt to async. This can happen | |
| * if we have data partially cached. Alternatively we can | |
| * return the short read, in which case the application will | |
| * need to issue another SQE and wait for it. That SQE will | |
| * need async punt anyway, so it's more efficient to do it | |
| * here. | |
| */ | |
| if (force_nonblock && ret2 > 0 && ret2 < read_size) | |
| ret2 = -EAGAIN; | |
| /* Catch -EAGAIN return for forced non-blocking submission */ | |
| if (!force_nonblock || ret2 != -EAGAIN) { | |
| io_rw_done(kiocb, ret2); | |
| } else { | |
| /* | |
| * If ->needs_lock is true, we're already in async | |
| * context. | |
| */ | |
| if (!s->needs_lock) | |
| io_async_list_note(READ, req, iov_count); | |
| ret = -EAGAIN; | |
| } | |
| } | |
| kfree(iovec); | |
| return ret; | |
| } | |
| static int io_write(struct io_kiocb *req, const struct sqe_submit *s, | |
| bool force_nonblock) | |
| { | |
| struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; | |
| struct kiocb *kiocb = &req->rw; | |
| struct iov_iter iter; | |
| struct file *file; | |
| size_t iov_count; | |
| ssize_t ret; | |
| ret = io_prep_rw(req, s, force_nonblock); | |
| if (ret) | |
| return ret; | |
| file = kiocb->ki_filp; | |
| if (unlikely(!(file->f_mode & FMODE_WRITE))) | |
| return -EBADF; | |
| if (unlikely(!file->f_op->write_iter)) | |
| return -EINVAL; | |
| ret = io_import_iovec(req->ctx, WRITE, s, &iovec, &iter); | |
| if (ret < 0) | |
| return ret; | |
| if (req->flags & REQ_F_LINK) | |
| req->result = ret; | |
| iov_count = iov_iter_count(&iter); | |
| ret = -EAGAIN; | |
| if (force_nonblock && !(kiocb->ki_flags & IOCB_DIRECT)) { | |
| /* If ->needs_lock is true, we're already in async context. */ | |
| if (!s->needs_lock) | |
| io_async_list_note(WRITE, req, iov_count); | |
| goto out_free; | |
| } | |
| ret = rw_verify_area(WRITE, file, &kiocb->ki_pos, iov_count); | |
| if (!ret) { | |
| ssize_t ret2; | |
| /* | |
| * Open-code file_start_write here to grab freeze protection, | |
| * which will be released by another thread in | |
| * io_complete_rw(). Fool lockdep by telling it the lock got | |
| * released so that it doesn't complain about the held lock when | |
| * we return to userspace. | |
| */ | |
| if (S_ISREG(file_inode(file)->i_mode)) { | |
| __sb_start_write(file_inode(file)->i_sb, | |
| SB_FREEZE_WRITE, true); | |
| __sb_writers_release(file_inode(file)->i_sb, | |
| SB_FREEZE_WRITE); | |
| } | |
| kiocb->ki_flags |= IOCB_WRITE; | |
| ret2 = call_write_iter(file, kiocb, &iter); | |
| if (!force_nonblock || ret2 != -EAGAIN) { | |
| io_rw_done(kiocb, ret2); | |
| } else { | |
| /* | |
| * If ->needs_lock is true, we're already in async | |
| * context. | |
| */ | |
| if (!s->needs_lock) | |
| io_async_list_note(WRITE, req, iov_count); | |
| ret = -EAGAIN; | |
| } | |
| } | |
| out_free: | |
| kfree(iovec); | |
| return ret; | |
| } | |
| /* | |
| * IORING_OP_NOP just posts a completion event, nothing else. | |
| */ | |
| static int io_nop(struct io_kiocb *req, u64 user_data) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| long err = 0; | |
| if (unlikely(ctx->flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| io_cqring_add_event(ctx, user_data, err); | |
| io_put_req(req); | |
| return 0; | |
| } | |
| static int io_prep_fsync(struct io_kiocb *req, const struct io_uring_sqe *sqe) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| if (!req->file) | |
| return -EBADF; | |
| if (unlikely(ctx->flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| if (unlikely(sqe->addr || sqe->ioprio || sqe->buf_index)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int io_fsync(struct io_kiocb *req, const struct io_uring_sqe *sqe, | |
| bool force_nonblock) | |
| { | |
| loff_t sqe_off = READ_ONCE(sqe->off); | |
| loff_t sqe_len = READ_ONCE(sqe->len); | |
| loff_t end = sqe_off + sqe_len; | |
| unsigned fsync_flags; | |
| int ret; | |
| fsync_flags = READ_ONCE(sqe->fsync_flags); | |
| if (unlikely(fsync_flags & ~IORING_FSYNC_DATASYNC)) | |
| return -EINVAL; | |
| ret = io_prep_fsync(req, sqe); | |
| if (ret) | |
| return ret; | |
| /* fsync always requires a blocking context */ | |
| if (force_nonblock) | |
| return -EAGAIN; | |
| ret = vfs_fsync_range(req->rw.ki_filp, sqe_off, | |
| end > 0 ? end : LLONG_MAX, | |
| fsync_flags & IORING_FSYNC_DATASYNC); | |
| if (ret < 0 && (req->flags & REQ_F_LINK)) | |
| req->flags |= REQ_F_FAIL_LINK; | |
| io_cqring_add_event(req->ctx, sqe->user_data, ret); | |
| io_put_req(req); | |
| return 0; | |
| } | |
| static int io_prep_sfr(struct io_kiocb *req, const struct io_uring_sqe *sqe) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| int ret = 0; | |
| if (!req->file) | |
| return -EBADF; | |
| if (unlikely(ctx->flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| if (unlikely(sqe->addr || sqe->ioprio || sqe->buf_index)) | |
| return -EINVAL; | |
| return ret; | |
| } | |
| static int io_sync_file_range(struct io_kiocb *req, | |
| const struct io_uring_sqe *sqe, | |
| bool force_nonblock) | |
| { | |
| loff_t sqe_off; | |
| loff_t sqe_len; | |
| unsigned flags; | |
| int ret; | |
| ret = io_prep_sfr(req, sqe); | |
| if (ret) | |
| return ret; | |
| /* sync_file_range always requires a blocking context */ | |
| if (force_nonblock) | |
| return -EAGAIN; | |
| sqe_off = READ_ONCE(sqe->off); | |
| sqe_len = READ_ONCE(sqe->len); | |
| flags = READ_ONCE(sqe->sync_range_flags); | |
| ret = sync_file_range(req->rw.ki_filp, sqe_off, sqe_len, flags); | |
| if (ret < 0 && (req->flags & REQ_F_LINK)) | |
| req->flags |= REQ_F_FAIL_LINK; | |
| io_cqring_add_event(req->ctx, sqe->user_data, ret); | |
| io_put_req(req); | |
| return 0; | |
| } | |
| #if defined(CONFIG_NET) | |
| static int io_send_recvmsg(struct io_kiocb *req, const struct io_uring_sqe *sqe, | |
| bool force_nonblock, | |
| long (*fn)(struct socket *, struct user_msghdr __user *, | |
| unsigned int)) | |
| { | |
| struct socket *sock; | |
| int ret; | |
| if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| sock = sock_from_file(req->file, &ret); | |
| if (sock) { | |
| struct user_msghdr __user *msg; | |
| unsigned flags; | |
| flags = READ_ONCE(sqe->msg_flags); | |
| if (flags & MSG_DONTWAIT) | |
| req->flags |= REQ_F_NOWAIT; | |
| else if (force_nonblock) | |
| flags |= MSG_DONTWAIT; | |
| msg = (struct user_msghdr __user *) (unsigned long) | |
| READ_ONCE(sqe->addr); | |
| ret = fn(sock, msg, flags); | |
| if (force_nonblock && ret == -EAGAIN) | |
| return ret; | |
| } | |
| io_cqring_add_event(req->ctx, sqe->user_data, ret); | |
| io_put_req(req); | |
| return 0; | |
| } | |
| #endif | |
| static int io_sendmsg(struct io_kiocb *req, const struct io_uring_sqe *sqe, | |
| bool force_nonblock) | |
| { | |
| #if defined(CONFIG_NET) | |
| return io_send_recvmsg(req, sqe, force_nonblock, __sys_sendmsg_sock); | |
| #else | |
| return -EOPNOTSUPP; | |
| #endif | |
| } | |
| static int io_recvmsg(struct io_kiocb *req, const struct io_uring_sqe *sqe, | |
| bool force_nonblock) | |
| { | |
| #if defined(CONFIG_NET) | |
| return io_send_recvmsg(req, sqe, force_nonblock, __sys_recvmsg_sock); | |
| #else | |
| return -EOPNOTSUPP; | |
| #endif | |
| } | |
| static void io_poll_remove_one(struct io_kiocb *req) | |
| { | |
| struct io_poll_iocb *poll = &req->poll; | |
| spin_lock(&poll->head->lock); | |
| WRITE_ONCE(poll->canceled, true); | |
| if (!list_empty(&poll->wait.entry)) { | |
| list_del_init(&poll->wait.entry); | |
| queue_work(req->ctx->sqo_wq, &req->work); | |
| } | |
| spin_unlock(&poll->head->lock); | |
| list_del_init(&req->list); | |
| } | |
| static void io_poll_remove_all(struct io_ring_ctx *ctx) | |
| { | |
| struct io_kiocb *req; | |
| spin_lock_irq(&ctx->completion_lock); | |
| while (!list_empty(&ctx->cancel_list)) { | |
| req = list_first_entry(&ctx->cancel_list, struct io_kiocb,list); | |
| io_poll_remove_one(req); | |
| } | |
| spin_unlock_irq(&ctx->completion_lock); | |
| } | |
| /* | |
| * Find a running poll command that matches one specified in sqe->addr, | |
| * and remove it if found. | |
| */ | |
| static int io_poll_remove(struct io_kiocb *req, const struct io_uring_sqe *sqe) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_kiocb *poll_req, *next; | |
| int ret = -ENOENT; | |
| if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| if (sqe->ioprio || sqe->off || sqe->len || sqe->buf_index || | |
| sqe->poll_events) | |
| return -EINVAL; | |
| spin_lock_irq(&ctx->completion_lock); | |
| list_for_each_entry_safe(poll_req, next, &ctx->cancel_list, list) { | |
| if (READ_ONCE(sqe->addr) == poll_req->user_data) { | |
| io_poll_remove_one(poll_req); | |
| ret = 0; | |
| break; | |
| } | |
| } | |
| spin_unlock_irq(&ctx->completion_lock); | |
| io_cqring_add_event(req->ctx, sqe->user_data, ret); | |
| io_put_req(req); | |
| return 0; | |
| } | |
| static void io_poll_complete(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| __poll_t mask) | |
| { | |
| req->poll.done = true; | |
| io_cqring_fill_event(ctx, req->user_data, mangle_poll(mask)); | |
| io_commit_cqring(ctx); | |
| } | |
| static void io_poll_complete_work(struct work_struct *work) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| struct io_poll_iocb *poll = &req->poll; | |
| struct poll_table_struct pt = { ._key = poll->events }; | |
| struct io_ring_ctx *ctx = req->ctx; | |
| __poll_t mask = 0; | |
| if (!READ_ONCE(poll->canceled)) | |
| mask = vfs_poll(poll->file, &pt) & poll->events; | |
| /* | |
| * Note that ->ki_cancel callers also delete iocb from active_reqs after | |
| * calling ->ki_cancel. We need the ctx_lock roundtrip here to | |
| * synchronize with them. In the cancellation case the list_del_init | |
| * itself is not actually needed, but harmless so we keep it in to | |
| * avoid further branches in the fast path. | |
| */ | |
| spin_lock_irq(&ctx->completion_lock); | |
| if (!mask && !READ_ONCE(poll->canceled)) { | |
| add_wait_queue(poll->head, &poll->wait); | |
| spin_unlock_irq(&ctx->completion_lock); | |
| return; | |
| } | |
| list_del_init(&req->list); | |
| io_poll_complete(ctx, req, mask); | |
| spin_unlock_irq(&ctx->completion_lock); | |
| io_cqring_ev_posted(ctx); | |
| io_put_req(req); | |
| } | |
| static int io_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync, | |
| void *key) | |
| { | |
| struct io_poll_iocb *poll = container_of(wait, struct io_poll_iocb, | |
| wait); | |
| struct io_kiocb *req = container_of(poll, struct io_kiocb, poll); | |
| struct io_ring_ctx *ctx = req->ctx; | |
| __poll_t mask = key_to_poll(key); | |
| unsigned long flags; | |
| /* for instances that support it check for an event match first: */ | |
| if (mask && !(mask & poll->events)) | |
| return 0; | |
| list_del_init(&poll->wait.entry); | |
| if (mask && spin_trylock_irqsave(&ctx->completion_lock, flags)) { | |
| list_del(&req->list); | |
| io_poll_complete(ctx, req, mask); | |
| spin_unlock_irqrestore(&ctx->completion_lock, flags); | |
| io_cqring_ev_posted(ctx); | |
| io_put_req(req); | |
| } else { | |
| queue_work(ctx->sqo_wq, &req->work); | |
| } | |
| return 1; | |
| } | |
| struct io_poll_table { | |
| struct poll_table_struct pt; | |
| struct io_kiocb *req; | |
| int error; | |
| }; | |
| static void io_poll_queue_proc(struct file *file, struct wait_queue_head *head, | |
| struct poll_table_struct *p) | |
| { | |
| struct io_poll_table *pt = container_of(p, struct io_poll_table, pt); | |
| if (unlikely(pt->req->poll.head)) { | |
| pt->error = -EINVAL; | |
| return; | |
| } | |
| pt->error = 0; | |
| pt->req->poll.head = head; | |
| add_wait_queue(head, &pt->req->poll.wait); | |
| } | |
| static int io_poll_add(struct io_kiocb *req, const struct io_uring_sqe *sqe) | |
| { | |
| struct io_poll_iocb *poll = &req->poll; | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_poll_table ipt; | |
| bool cancel = false; | |
| __poll_t mask; | |
| u16 events; | |
| if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| if (sqe->addr || sqe->ioprio || sqe->off || sqe->len || sqe->buf_index) | |
| return -EINVAL; | |
| if (!poll->file) | |
| return -EBADF; | |
| INIT_WORK(&req->work, io_poll_complete_work); | |
| events = READ_ONCE(sqe->poll_events); | |
| poll->events = demangle_poll(events) | EPOLLERR | EPOLLHUP; | |
| poll->head = NULL; | |
| poll->done = false; | |
| poll->canceled = false; | |
| ipt.pt._qproc = io_poll_queue_proc; | |
| ipt.pt._key = poll->events; | |
| ipt.req = req; | |
| ipt.error = -EINVAL; /* same as no support for IOCB_CMD_POLL */ | |
| /* initialized the list so that we can do list_empty checks */ | |
| INIT_LIST_HEAD(&poll->wait.entry); | |
| init_waitqueue_func_entry(&poll->wait, io_poll_wake); | |
| mask = vfs_poll(poll->file, &ipt.pt) & poll->events; | |
| spin_lock_irq(&ctx->completion_lock); | |
| if (likely(poll->head)) { | |
| spin_lock(&poll->head->lock); | |
| if (unlikely(list_empty(&poll->wait.entry))) { | |
| if (ipt.error) | |
| cancel = true; | |
| ipt.error = 0; | |
| mask = 0; | |
| } | |
| if (mask || ipt.error) | |
| list_del_init(&poll->wait.entry); | |
| else if (cancel) | |
| WRITE_ONCE(poll->canceled, true); | |
| else if (!poll->done) /* actually waiting for an event */ | |
| list_add_tail(&req->list, &ctx->cancel_list); | |
| spin_unlock(&poll->head->lock); | |
| } | |
| if (mask) { /* no async, we'd stolen it */ | |
| ipt.error = 0; | |
| io_poll_complete(ctx, req, mask); | |
| } | |
| spin_unlock_irq(&ctx->completion_lock); | |
| if (mask) { | |
| io_cqring_ev_posted(ctx); | |
| io_put_req(req); | |
| } | |
| return ipt.error; | |
| } | |
| static int io_req_defer(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| const struct io_uring_sqe *sqe) | |
| { | |
| struct io_uring_sqe *sqe_copy; | |
| if (!io_sequence_defer(ctx, req) && list_empty(&ctx->defer_list)) | |
| return 0; | |
| sqe_copy = kmalloc(sizeof(*sqe_copy), GFP_KERNEL); | |
| if (!sqe_copy) | |
| return -EAGAIN; | |
| spin_lock_irq(&ctx->completion_lock); | |
| if (!io_sequence_defer(ctx, req) && list_empty(&ctx->defer_list)) { | |
| spin_unlock_irq(&ctx->completion_lock); | |
| kfree(sqe_copy); | |
| return 0; | |
| } | |
| memcpy(sqe_copy, sqe, sizeof(*sqe_copy)); | |
| req->submit.sqe = sqe_copy; | |
| INIT_WORK(&req->work, io_sq_wq_submit_work); | |
| list_add_tail(&req->list, &ctx->defer_list); | |
| spin_unlock_irq(&ctx->completion_lock); | |
| return -EIOCBQUEUED; | |
| } | |
| static int __io_submit_sqe(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| const struct sqe_submit *s, bool force_nonblock) | |
| { | |
| int ret, opcode; | |
| req->user_data = READ_ONCE(s->sqe->user_data); | |
| if (unlikely(s->index >= ctx->sq_entries)) | |
| return -EINVAL; | |
| opcode = READ_ONCE(s->sqe->opcode); | |
| switch (opcode) { | |
| case IORING_OP_NOP: | |
| ret = io_nop(req, req->user_data); | |
| break; | |
| case IORING_OP_READV: | |
| if (unlikely(s->sqe->buf_index)) | |
| return -EINVAL; | |
| ret = io_read(req, s, force_nonblock); | |
| break; | |
| case IORING_OP_WRITEV: | |
| if (unlikely(s->sqe->buf_index)) | |
| return -EINVAL; | |
| ret = io_write(req, s, force_nonblock); | |
| break; | |
| case IORING_OP_READ_FIXED: | |
| ret = io_read(req, s, force_nonblock); | |
| break; | |
| case IORING_OP_WRITE_FIXED: | |
| ret = io_write(req, s, force_nonblock); | |
| break; | |
| case IORING_OP_FSYNC: | |
| ret = io_fsync(req, s->sqe, force_nonblock); | |
| break; | |
| case IORING_OP_POLL_ADD: | |
| ret = io_poll_add(req, s->sqe); | |
| break; | |
| case IORING_OP_POLL_REMOVE: | |
| ret = io_poll_remove(req, s->sqe); | |
| break; | |
| case IORING_OP_SYNC_FILE_RANGE: | |
| ret = io_sync_file_range(req, s->sqe, force_nonblock); | |
| break; | |
| case IORING_OP_SENDMSG: | |
| ret = io_sendmsg(req, s->sqe, force_nonblock); | |
| break; | |
| case IORING_OP_RECVMSG: | |
| ret = io_recvmsg(req, s->sqe, force_nonblock); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (ret) | |
| return ret; | |
| if (ctx->flags & IORING_SETUP_IOPOLL) { | |
| if (req->result == -EAGAIN) | |
| return -EAGAIN; | |
| /* workqueue context doesn't hold uring_lock, grab it now */ | |
| if (s->needs_lock) | |
| mutex_lock(&ctx->uring_lock); | |
| io_iopoll_req_issued(req); | |
| if (s->needs_lock) | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| return 0; | |
| } | |
| static struct async_list *io_async_list_from_sqe(struct io_ring_ctx *ctx, | |
| const struct io_uring_sqe *sqe) | |
| { | |
| switch (sqe->opcode) { | |
| case IORING_OP_READV: | |
| case IORING_OP_READ_FIXED: | |
| return &ctx->pending_async[READ]; | |
| case IORING_OP_WRITEV: | |
| case IORING_OP_WRITE_FIXED: | |
| return &ctx->pending_async[WRITE]; | |
| default: | |
| return NULL; | |
| } | |
| } | |
| static inline bool io_sqe_needs_user(const struct io_uring_sqe *sqe) | |
| { | |
| u8 opcode = READ_ONCE(sqe->opcode); | |
| return !(opcode == IORING_OP_READ_FIXED || | |
| opcode == IORING_OP_WRITE_FIXED); | |
| } | |
| static void io_sq_wq_submit_work(struct work_struct *work) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct mm_struct *cur_mm = NULL; | |
| struct async_list *async_list; | |
| LIST_HEAD(req_list); | |
| mm_segment_t old_fs; | |
| int ret; | |
| async_list = io_async_list_from_sqe(ctx, req->submit.sqe); | |
| restart: | |
| do { | |
| struct sqe_submit *s = &req->submit; | |
| const struct io_uring_sqe *sqe = s->sqe; | |
| /* Ensure we clear previously set non-block flag */ | |
| req->rw.ki_flags &= ~IOCB_NOWAIT; | |
| ret = 0; | |
| if (io_sqe_needs_user(sqe) && !cur_mm) { | |
| if (!mmget_not_zero(ctx->sqo_mm)) { | |
| ret = -EFAULT; | |
| } else { | |
| cur_mm = ctx->sqo_mm; | |
| use_mm(cur_mm); | |
| old_fs = get_fs(); | |
| set_fs(USER_DS); | |
| } | |
| } | |
| if (!ret) { | |
| s->has_user = cur_mm != NULL; | |
| s->needs_lock = true; | |
| do { | |
| ret = __io_submit_sqe(ctx, req, s, false); | |
| /* | |
| * We can get EAGAIN for polled IO even though | |
| * we're forcing a sync submission from here, | |
| * since we can't wait for request slots on the | |
| * block side. | |
| */ | |
| if (ret != -EAGAIN) | |
| break; | |
| cond_resched(); | |
| } while (1); | |
| } | |
| /* drop submission reference */ | |
| io_put_req(req); | |
| if (ret) { | |
| io_cqring_add_event(ctx, sqe->user_data, ret); | |
| io_put_req(req); | |
| } | |
| /* async context always use a copy of the sqe */ | |
| kfree(sqe); | |
| if (!async_list) | |
| break; | |
| if (!list_empty(&req_list)) { | |
| req = list_first_entry(&req_list, struct io_kiocb, | |
| list); | |
| list_del(&req->list); | |
| continue; | |
| } | |
| if (list_empty(&async_list->list)) | |
| break; | |
| req = NULL; | |
| spin_lock(&async_list->lock); | |
| if (list_empty(&async_list->list)) { | |
| spin_unlock(&async_list->lock); | |
| break; | |
| } | |
| list_splice_init(&async_list->list, &req_list); | |
| spin_unlock(&async_list->lock); | |
| req = list_first_entry(&req_list, struct io_kiocb, list); | |
| list_del(&req->list); | |
| } while (req); | |
| /* | |
| * Rare case of racing with a submitter. If we find the count has | |
| * dropped to zero AND we have pending work items, then restart | |
| * the processing. This is a tiny race window. | |
| */ | |
| if (async_list) { | |
| ret = atomic_dec_return(&async_list->cnt); | |
| while (!ret && !list_empty(&async_list->list)) { | |
| spin_lock(&async_list->lock); | |
| atomic_inc(&async_list->cnt); | |
| list_splice_init(&async_list->list, &req_list); | |
| spin_unlock(&async_list->lock); | |
| if (!list_empty(&req_list)) { | |
| req = list_first_entry(&req_list, | |
| struct io_kiocb, list); | |
| list_del(&req->list); | |
| goto restart; | |
| } | |
| ret = atomic_dec_return(&async_list->cnt); | |
| } | |
| } | |
| if (cur_mm) { | |
| set_fs(old_fs); | |
| unuse_mm(cur_mm); | |
| mmput(cur_mm); | |
| } | |
| } | |
| /* | |
| * See if we can piggy back onto previously submitted work, that is still | |
| * running. We currently only allow this if the new request is sequential | |
| * to the previous one we punted. | |
| */ | |
| static bool io_add_to_prev_work(struct async_list *list, struct io_kiocb *req) | |
| { | |
| bool ret = false; | |
| if (!list) | |
| return false; | |
| if (!(req->flags & REQ_F_SEQ_PREV)) | |
| return false; | |
| if (!atomic_read(&list->cnt)) | |
| return false; | |
| ret = true; | |
| spin_lock(&list->lock); | |
| list_add_tail(&req->list, &list->list); | |
| if (!atomic_read(&list->cnt)) { | |
| list_del_init(&req->list); | |
| ret = false; | |
| } | |
| spin_unlock(&list->lock); | |
| return ret; | |
| } | |
| static bool io_op_needs_file(const struct io_uring_sqe *sqe) | |
| { | |
| int op = READ_ONCE(sqe->opcode); | |
| switch (op) { | |
| case IORING_OP_NOP: | |
| case IORING_OP_POLL_REMOVE: | |
| return false; | |
| default: | |
| return true; | |
| } | |
| } | |
| static int io_req_set_file(struct io_ring_ctx *ctx, const struct sqe_submit *s, | |
| struct io_submit_state *state, struct io_kiocb *req) | |
| { | |
| unsigned flags; | |
| int fd; | |
| flags = READ_ONCE(s->sqe->flags); | |
| fd = READ_ONCE(s->sqe->fd); | |
| if (flags & IOSQE_IO_DRAIN) { | |
| req->flags |= REQ_F_IO_DRAIN; | |
| req->sequence = ctx->cached_sq_head - 1; | |
| } | |
| if (!io_op_needs_file(s->sqe)) | |
| return 0; | |
| if (flags & IOSQE_FIXED_FILE) { | |
| if (unlikely(!ctx->user_files || | |
| (unsigned) fd >= ctx->nr_user_files)) | |
| return -EBADF; | |
| req->file = ctx->user_files[fd]; | |
| req->flags |= REQ_F_FIXED_FILE; | |
| } else { | |
| if (s->needs_fixed_file) | |
| return -EBADF; | |
| req->file = io_file_get(state, fd); | |
| if (unlikely(!req->file)) | |
| return -EBADF; | |
| } | |
| return 0; | |
| } | |
| static int io_queue_sqe(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| struct sqe_submit *s) | |
| { | |
| int ret; | |
| ret = __io_submit_sqe(ctx, req, s, true); | |
| if (ret == -EAGAIN && !(req->flags & REQ_F_NOWAIT)) { | |
| struct io_uring_sqe *sqe_copy; | |
| sqe_copy = kmalloc(sizeof(*sqe_copy), GFP_KERNEL); | |
| if (sqe_copy) { | |
| struct async_list *list; | |
| memcpy(sqe_copy, s->sqe, sizeof(*sqe_copy)); | |
| s->sqe = sqe_copy; | |
| memcpy(&req->submit, s, sizeof(*s)); | |
| list = io_async_list_from_sqe(ctx, s->sqe); | |
| if (!io_add_to_prev_work(list, req)) { | |
| if (list) | |
| atomic_inc(&list->cnt); | |
| INIT_WORK(&req->work, io_sq_wq_submit_work); | |
| queue_work(ctx->sqo_wq, &req->work); | |
| } | |
| /* | |
| * Queued up for async execution, worker will release | |
| * submit reference when the iocb is actually submitted. | |
| */ | |
| return 0; | |
| } | |
| } | |
| /* drop submission reference */ | |
| io_put_req(req); | |
| /* and drop final reference, if we failed */ | |
| if (ret) { | |
| io_cqring_add_event(ctx, req->user_data, ret); | |
| if (req->flags & REQ_F_LINK) | |
| req->flags |= REQ_F_FAIL_LINK; | |
| io_put_req(req); | |
| } | |
| return ret; | |
| } | |
| #define SQE_VALID_FLAGS (IOSQE_FIXED_FILE|IOSQE_IO_DRAIN|IOSQE_IO_LINK) | |
| static void io_submit_sqe(struct io_ring_ctx *ctx, struct sqe_submit *s, | |
| struct io_submit_state *state, struct io_kiocb **link) | |
| { | |
| struct io_uring_sqe *sqe_copy; | |
| struct io_kiocb *req; | |
| int ret; | |
| /* enforce forwards compatibility on users */ | |
| if (unlikely(s->sqe->flags & ~SQE_VALID_FLAGS)) { | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| req = io_get_req(ctx, state); | |
| if (unlikely(!req)) { | |
| ret = -EAGAIN; | |
| goto err; | |
| } | |
| ret = io_req_set_file(ctx, s, state, req); | |
| if (unlikely(ret)) { | |
| err_req: | |
| io_free_req(req); | |
| err: | |
| io_cqring_add_event(ctx, s->sqe->user_data, ret); | |
| return; | |
| } | |
| ret = io_req_defer(ctx, req, s->sqe); | |
| if (ret) { | |
| if (ret != -EIOCBQUEUED) | |
| goto err_req; | |
| return; | |
| } | |
| /* | |
| * If we already have a head request, queue this one for async | |
| * submittal once the head completes. If we don't have a head but | |
| * IOSQE_IO_LINK is set in the sqe, start a new head. This one will be | |
| * submitted sync once the chain is complete. If none of those | |
| * conditions are true (normal request), then just queue it. | |
| */ | |
| if (*link) { | |
| struct io_kiocb *prev = *link; | |
| sqe_copy = kmemdup(s->sqe, sizeof(*sqe_copy), GFP_KERNEL); | |
| if (!sqe_copy) { | |
| ret = -EAGAIN; | |
| goto err_req; | |
| } | |
| s->sqe = sqe_copy; | |
| memcpy(&req->submit, s, sizeof(*s)); | |
| list_add_tail(&req->list, &prev->link_list); | |
| } else if (s->sqe->flags & IOSQE_IO_LINK) { | |
| req->flags |= REQ_F_LINK; | |
| memcpy(&req->submit, s, sizeof(*s)); | |
| INIT_LIST_HEAD(&req->link_list); | |
| *link = req; | |
| } else { | |
| io_queue_sqe(ctx, req, s); | |
| } | |
| } | |
| /* | |
| * Batched submission is done, ensure local IO is flushed out. | |
| */ | |
| static void io_submit_state_end(struct io_submit_state *state) | |
| { | |
| blk_finish_plug(&state->plug); | |
| io_file_put(state); | |
| if (state->free_reqs) | |
| kmem_cache_free_bulk(req_cachep, state->free_reqs, | |
| &state->reqs[state->cur_req]); | |
| } | |
| /* | |
| * Start submission side cache. | |
| */ | |
| static void io_submit_state_start(struct io_submit_state *state, | |
| struct io_ring_ctx *ctx, unsigned max_ios) | |
| { | |
| blk_start_plug(&state->plug); | |
| state->free_reqs = 0; | |
| state->file = NULL; | |
| state->ios_left = max_ios; | |
| } | |
| static void io_commit_sqring(struct io_ring_ctx *ctx) | |
| { | |
| struct io_sq_ring *ring = ctx->sq_ring; | |
| if (ctx->cached_sq_head != READ_ONCE(ring->r.head)) { | |
| /* | |
| * Ensure any loads from the SQEs are done at this point, | |
| * since once we write the new head, the application could | |
| * write new data to them. | |
| */ | |
| smp_store_release(&ring->r.head, ctx->cached_sq_head); | |
| } | |
| } | |
| /* | |
| * Fetch an sqe, if one is available. Note that s->sqe will point to memory | |
| * that is mapped by userspace. This means that care needs to be taken to | |
| * ensure that reads are stable, as we cannot rely on userspace always | |
| * being a good citizen. If members of the sqe are validated and then later | |
| * used, it's important that those reads are done through READ_ONCE() to | |
| * prevent a re-load down the line. | |
| */ | |
| static bool io_get_sqring(struct io_ring_ctx *ctx, struct sqe_submit *s) | |
| { | |
| struct io_sq_ring *ring = ctx->sq_ring; | |
| unsigned head; | |
| /* | |
| * The cached sq head (or cq tail) serves two purposes: | |
| * | |
| * 1) allows us to batch the cost of updating the user visible | |
| * head updates. | |
| * 2) allows the kernel side to track the head on its own, even | |
| * though the application is the one updating it. | |
| */ | |
| head = ctx->cached_sq_head; | |
| /* make sure SQ entry isn't read before tail */ | |
| if (head == smp_load_acquire(&ring->r.tail)) | |
| return false; | |
| head = READ_ONCE(ring->array[head & ctx->sq_mask]); | |
| if (head < ctx->sq_entries) { | |
| s->index = head; | |
| s->sqe = &ctx->sq_sqes[head]; | |
| ctx->cached_sq_head++; | |
| return true; | |
| } | |
| /* drop invalid entries */ | |
| ctx->cached_sq_head++; | |
| ring->dropped++; | |
| return false; | |
| } | |
| static int io_submit_sqes(struct io_ring_ctx *ctx, struct sqe_submit *sqes, | |
| unsigned int nr, bool has_user, bool mm_fault) | |
| { | |
| struct io_submit_state state, *statep = NULL; | |
| struct io_kiocb *link = NULL; | |
| bool prev_was_link = false; | |
| int i, submitted = 0; | |
| if (nr > IO_PLUG_THRESHOLD) { | |
| io_submit_state_start(&state, ctx, nr); | |
| statep = &state; | |
| } | |
| for (i = 0; i < nr; i++) { | |
| /* | |
| * If previous wasn't linked and we have a linked command, | |
| * that's the end of the chain. Submit the previous link. | |
| */ | |
| if (!prev_was_link && link) { | |
| io_queue_sqe(ctx, link, &link->submit); | |
| link = NULL; | |
| } | |
| prev_was_link = (sqes[i].sqe->flags & IOSQE_IO_LINK) != 0; | |
| if (unlikely(mm_fault)) { | |
| io_cqring_add_event(ctx, sqes[i].sqe->user_data, | |
| -EFAULT); | |
| } else { | |
| sqes[i].has_user = has_user; | |
| sqes[i].needs_lock = true; | |
| sqes[i].needs_fixed_file = true; | |
| io_submit_sqe(ctx, &sqes[i], statep, &link); | |
| submitted++; | |
| } | |
| } | |
| if (link) | |
| io_queue_sqe(ctx, link, &link->submit); | |
| if (statep) | |
| io_submit_state_end(&state); | |
| return submitted; | |
| } | |
| static int io_sq_thread(void *data) | |
| { | |
| struct sqe_submit sqes[IO_IOPOLL_BATCH]; | |
| struct io_ring_ctx *ctx = data; | |
| struct mm_struct *cur_mm = NULL; | |
| mm_segment_t old_fs; | |
| DEFINE_WAIT(wait); | |
| unsigned inflight; | |
| unsigned long timeout; | |
| complete(&ctx->sqo_thread_started); | |
| old_fs = get_fs(); | |
| set_fs(USER_DS); | |
| timeout = inflight = 0; | |
| while (!kthread_should_park()) { | |
| bool all_fixed, mm_fault = false; | |
| int i; | |
| if (inflight) { | |
| unsigned nr_events = 0; | |
| if (ctx->flags & IORING_SETUP_IOPOLL) { | |
| /* | |
| * We disallow the app entering submit/complete | |
| * with polling, but we still need to lock the | |
| * ring to prevent racing with polled issue | |
| * that got punted to a workqueue. | |
| */ | |
| mutex_lock(&ctx->uring_lock); | |
| io_iopoll_check(ctx, &nr_events, 0); | |
| mutex_unlock(&ctx->uring_lock); | |
| } else { | |
| /* | |
| * Normal IO, just pretend everything completed. | |
| * We don't have to poll completions for that. | |
| */ | |
| nr_events = inflight; | |
| } | |
| inflight -= nr_events; | |
| if (!inflight) | |
| timeout = jiffies + ctx->sq_thread_idle; | |
| } | |
| if (!io_get_sqring(ctx, &sqes[0])) { | |
| /* | |
| * We're polling. If we're within the defined idle | |
| * period, then let us spin without work before going | |
| * to sleep. | |
| */ | |
| if (inflight || !time_after(jiffies, timeout)) { | |
| cpu_relax(); | |
| continue; | |
| } | |
| /* | |
| * Drop cur_mm before scheduling, we can't hold it for | |
| * long periods (or over schedule()). Do this before | |
| * adding ourselves to the waitqueue, as the unuse/drop | |
| * may sleep. | |
| */ | |
| if (cur_mm) { | |
| unuse_mm(cur_mm); | |
| mmput(cur_mm); | |
| cur_mm = NULL; | |
| } | |
| prepare_to_wait(&ctx->sqo_wait, &wait, | |
| TASK_INTERRUPTIBLE); | |
| /* Tell userspace we may need a wakeup call */ | |
| ctx->sq_ring->flags |= IORING_SQ_NEED_WAKEUP; | |
| /* make sure to read SQ tail after writing flags */ | |
| smp_mb(); | |
| if (!io_get_sqring(ctx, &sqes[0])) { | |
| if (kthread_should_park()) { | |
| finish_wait(&ctx->sqo_wait, &wait); | |
| break; | |
| } | |
| if (signal_pending(current)) | |
| flush_signals(current); | |
| schedule(); | |
| finish_wait(&ctx->sqo_wait, &wait); | |
| ctx->sq_ring->flags &= ~IORING_SQ_NEED_WAKEUP; | |
| continue; | |
| } | |
| finish_wait(&ctx->sqo_wait, &wait); | |
| ctx->sq_ring->flags &= ~IORING_SQ_NEED_WAKEUP; | |
| } | |
| i = 0; | |
| all_fixed = true; | |
| do { | |
| if (all_fixed && io_sqe_needs_user(sqes[i].sqe)) | |
| all_fixed = false; | |
| i++; | |
| if (i == ARRAY_SIZE(sqes)) | |
| break; | |
| } while (io_get_sqring(ctx, &sqes[i])); | |
| /* Unless all new commands are FIXED regions, grab mm */ | |
| if (!all_fixed && !cur_mm) { | |
| mm_fault = !mmget_not_zero(ctx->sqo_mm); | |
| if (!mm_fault) { | |
| use_mm(ctx->sqo_mm); | |
| cur_mm = ctx->sqo_mm; | |
| } | |
| } | |
| inflight += io_submit_sqes(ctx, sqes, i, cur_mm != NULL, | |
| mm_fault); | |
| /* Commit SQ ring head once we've consumed all SQEs */ | |
| io_commit_sqring(ctx); | |
| } | |
| set_fs(old_fs); | |
| if (cur_mm) { | |
| unuse_mm(cur_mm); | |
| mmput(cur_mm); | |
| } | |
| kthread_parkme(); | |
| return 0; | |
| } | |
| static int io_ring_submit(struct io_ring_ctx *ctx, unsigned int to_submit) | |
| { | |
| struct io_submit_state state, *statep = NULL; | |
| struct io_kiocb *link = NULL; | |
| bool prev_was_link = false; | |
| int i, submit = 0; | |
| if (to_submit > IO_PLUG_THRESHOLD) { | |
| io_submit_state_start(&state, ctx, to_submit); | |
| statep = &state; | |
| } | |
| for (i = 0; i < to_submit; i++) { | |
| struct sqe_submit s; | |
| if (!io_get_sqring(ctx, &s)) | |
| break; | |
| /* | |
| * If previous wasn't linked and we have a linked command, | |
| * that's the end of the chain. Submit the previous link. | |
| */ | |
| if (!prev_was_link && link) { | |
| io_queue_sqe(ctx, link, &link->submit); | |
| link = NULL; | |
| } | |
| prev_was_link = (s.sqe->flags & IOSQE_IO_LINK) != 0; | |
| s.has_user = true; | |
| s.needs_lock = false; | |
| s.needs_fixed_file = false; | |
| submit++; | |
| io_submit_sqe(ctx, &s, statep, &link); | |
| } | |
| io_commit_sqring(ctx); | |
| if (link) | |
| io_queue_sqe(ctx, link, &link->submit); | |
| if (statep) | |
| io_submit_state_end(statep); | |
| return submit; | |
| } | |
| static unsigned io_cqring_events(struct io_cq_ring *ring) | |
| { | |
| /* See comment at the top of this file */ | |
| smp_rmb(); | |
| return READ_ONCE(ring->r.tail) - READ_ONCE(ring->r.head); | |
| } | |
| /* | |
| * Wait until events become available, if we don't already have some. The | |
| * application must reap them itself, as they reside on the shared cq ring. | |
| */ | |
| static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, | |
| const sigset_t __user *sig, size_t sigsz) | |
| { | |
| struct io_cq_ring *ring = ctx->cq_ring; | |
| int ret; | |
| if (io_cqring_events(ring) >= min_events) | |
| return 0; | |
| if (sig) { | |
| #ifdef CONFIG_COMPAT | |
| if (in_compat_syscall()) | |
| ret = set_compat_user_sigmask((const compat_sigset_t __user *)sig, | |
| sigsz); | |
| else | |
| #endif | |
| ret = set_user_sigmask(sig, sigsz); | |
| if (ret) | |
| return ret; | |
| } | |
| ret = wait_event_interruptible(ctx->wait, io_cqring_events(ring) >= min_events); | |
| restore_saved_sigmask_unless(ret == -ERESTARTSYS); | |
| if (ret == -ERESTARTSYS) | |
| ret = -EINTR; | |
| return READ_ONCE(ring->r.head) == READ_ONCE(ring->r.tail) ? ret : 0; | |
| } | |
| static void __io_sqe_files_unregister(struct io_ring_ctx *ctx) | |
| { | |
| #if defined(CONFIG_UNIX) | |
| if (ctx->ring_sock) { | |
| struct sock *sock = ctx->ring_sock->sk; | |
| struct sk_buff *skb; | |
| while ((skb = skb_dequeue(&sock->sk_receive_queue)) != NULL) | |
| kfree_skb(skb); | |
| } | |
| #else | |
| int i; | |
| for (i = 0; i < ctx->nr_user_files; i++) | |
| fput(ctx->user_files[i]); | |
| #endif | |
| } | |
| static int io_sqe_files_unregister(struct io_ring_ctx *ctx) | |
| { | |
| if (!ctx->user_files) | |
| return -ENXIO; | |
| __io_sqe_files_unregister(ctx); | |
| kfree(ctx->user_files); | |
| ctx->user_files = NULL; | |
| ctx->nr_user_files = 0; | |
| return 0; | |
| } | |
| static void io_sq_thread_stop(struct io_ring_ctx *ctx) | |
| { | |
| if (ctx->sqo_thread) { | |
| wait_for_completion(&ctx->sqo_thread_started); | |
| /* | |
| * The park is a bit of a work-around, without it we get | |
| * warning spews on shutdown with SQPOLL set and affinity | |
| * set to a single CPU. | |
| */ | |
| kthread_park(ctx->sqo_thread); | |
| kthread_stop(ctx->sqo_thread); | |
| ctx->sqo_thread = NULL; | |
| } | |
| } | |
| static void io_finish_async(struct io_ring_ctx *ctx) | |
| { | |
| io_sq_thread_stop(ctx); | |
| if (ctx->sqo_wq) { | |
| destroy_workqueue(ctx->sqo_wq); | |
| ctx->sqo_wq = NULL; | |
| } | |
| } | |
| #if defined(CONFIG_UNIX) | |
| static void io_destruct_skb(struct sk_buff *skb) | |
| { | |
| struct io_ring_ctx *ctx = skb->sk->sk_user_data; | |
| io_finish_async(ctx); | |
| unix_destruct_scm(skb); | |
| } | |
| /* | |
| * Ensure the UNIX gc is aware of our file set, so we are certain that | |
| * the io_uring can be safely unregistered on process exit, even if we have | |
| * loops in the file referencing. | |
| */ | |
| static int __io_sqe_files_scm(struct io_ring_ctx *ctx, int nr, int offset) | |
| { | |
| struct sock *sk = ctx->ring_sock->sk; | |
| struct scm_fp_list *fpl; | |
| struct sk_buff *skb; | |
| int i; | |
| if (!capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) { | |
| unsigned long inflight = ctx->user->unix_inflight + nr; | |
| if (inflight > task_rlimit(current, RLIMIT_NOFILE)) | |
| return -EMFILE; | |
| } | |
| fpl = kzalloc(sizeof(*fpl), GFP_KERNEL); | |
| if (!fpl) | |
| return -ENOMEM; | |
| skb = alloc_skb(0, GFP_KERNEL); | |
| if (!skb) { | |
| kfree(fpl); | |
| return -ENOMEM; | |
| } | |
| skb->sk = sk; | |
| skb->destructor = io_destruct_skb; | |
| fpl->user = get_uid(ctx->user); | |
| for (i = 0; i < nr; i++) { | |
| fpl->fp[i] = get_file(ctx->user_files[i + offset]); | |
| unix_inflight(fpl->user, fpl->fp[i]); | |
| } | |
| fpl->max = fpl->count = nr; | |
| UNIXCB(skb).fp = fpl; | |
| refcount_add(skb->truesize, &sk->sk_wmem_alloc); | |
| skb_queue_head(&sk->sk_receive_queue, skb); | |
| for (i = 0; i < nr; i++) | |
| fput(fpl->fp[i]); | |
| return 0; | |
| } | |
| /* | |
| * If UNIX sockets are enabled, fd passing can cause a reference cycle which | |
| * causes regular reference counting to break down. We rely on the UNIX | |
| * garbage collection to take care of this problem for us. | |
| */ | |
| static int io_sqe_files_scm(struct io_ring_ctx *ctx) | |
| { | |
| unsigned left, total; | |
| int ret = 0; | |
| total = 0; | |
| left = ctx->nr_user_files; | |
| while (left) { | |
| unsigned this_files = min_t(unsigned, left, SCM_MAX_FD); | |
| ret = __io_sqe_files_scm(ctx, this_files, total); | |
| if (ret) | |
| break; | |
| left -= this_files; | |
| total += this_files; | |
| } | |
| if (!ret) | |
| return 0; | |
| while (total < ctx->nr_user_files) { | |
| fput(ctx->user_files[total]); | |
| total++; | |
| } | |
| return ret; | |
| } | |
| #else | |
| static int io_sqe_files_scm(struct io_ring_ctx *ctx) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg, | |
| unsigned nr_args) | |
| { | |
| __s32 __user *fds = (__s32 __user *) arg; | |
| int fd, ret = 0; | |
| unsigned i; | |
| if (ctx->user_files) | |
| return -EBUSY; | |
| if (!nr_args) | |
| return -EINVAL; | |
| if (nr_args > IORING_MAX_FIXED_FILES) | |
| return -EMFILE; | |
| ctx->user_files = kcalloc(nr_args, sizeof(struct file *), GFP_KERNEL); | |
| if (!ctx->user_files) | |
| return -ENOMEM; | |
| for (i = 0; i < nr_args; i++) { | |
| ret = -EFAULT; | |
| if (copy_from_user(&fd, &fds[i], sizeof(fd))) | |
| break; | |
| ctx->user_files[i] = fget(fd); | |
| ret = -EBADF; | |
| if (!ctx->user_files[i]) | |
| break; | |
| /* | |
| * Don't allow io_uring instances to be registered. If UNIX | |
| * isn't enabled, then this causes a reference cycle and this | |
| * instance can never get freed. If UNIX is enabled we'll | |
| * handle it just fine, but there's still no point in allowing | |
| * a ring fd as it doesn't support regular read/write anyway. | |
| */ | |
| if (ctx->user_files[i]->f_op == &io_uring_fops) { | |
| fput(ctx->user_files[i]); | |
| break; | |
| } | |
| ctx->nr_user_files++; | |
| ret = 0; | |
| } | |
| if (ret) { | |
| for (i = 0; i < ctx->nr_user_files; i++) | |
| fput(ctx->user_files[i]); | |
| kfree(ctx->user_files); | |
| ctx->user_files = NULL; | |
| ctx->nr_user_files = 0; | |
| return ret; | |
| } | |
| ret = io_sqe_files_scm(ctx); | |
| if (ret) | |
| io_sqe_files_unregister(ctx); | |
| return ret; | |
| } | |
| static int io_sq_offload_start(struct io_ring_ctx *ctx, | |
| struct io_uring_params *p) | |
| { | |
| int ret; | |
| init_waitqueue_head(&ctx->sqo_wait); | |
| mmgrab(current->mm); | |
| ctx->sqo_mm = current->mm; | |
| if (ctx->flags & IORING_SETUP_SQPOLL) { | |
| ret = -EPERM; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| goto err; | |
| ctx->sq_thread_idle = msecs_to_jiffies(p->sq_thread_idle); | |
| if (!ctx->sq_thread_idle) | |
| ctx->sq_thread_idle = HZ; | |
| if (p->flags & IORING_SETUP_SQ_AFF) { | |
| int cpu = p->sq_thread_cpu; | |
| ret = -EINVAL; | |
| if (cpu >= nr_cpu_ids) | |
| goto err; | |
| if (!cpu_online(cpu)) | |
| goto err; | |
| ctx->sqo_thread = kthread_create_on_cpu(io_sq_thread, | |
| ctx, cpu, | |
| "io_uring-sq"); | |
| } else { | |
| ctx->sqo_thread = kthread_create(io_sq_thread, ctx, | |
| "io_uring-sq"); | |
| } | |
| if (IS_ERR(ctx->sqo_thread)) { | |
| ret = PTR_ERR(ctx->sqo_thread); | |
| ctx->sqo_thread = NULL; | |
| goto err; | |
| } | |
| wake_up_process(ctx->sqo_thread); | |
| } else if (p->flags & IORING_SETUP_SQ_AFF) { | |
| /* Can't have SQ_AFF without SQPOLL */ | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| /* Do QD, or 2 * CPUS, whatever is smallest */ | |
| ctx->sqo_wq = alloc_workqueue("io_ring-wq", WQ_UNBOUND | WQ_FREEZABLE, | |
| min(ctx->sq_entries - 1, 2 * num_online_cpus())); | |
| if (!ctx->sqo_wq) { | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| io_sq_thread_stop(ctx); | |
| mmdrop(ctx->sqo_mm); | |
| ctx->sqo_mm = NULL; | |
| return ret; | |
| } | |
| static void io_unaccount_mem(struct user_struct *user, unsigned long nr_pages) | |
| { | |
| atomic_long_sub(nr_pages, &user->locked_vm); | |
| } | |
| static int io_account_mem(struct user_struct *user, unsigned long nr_pages) | |
| { | |
| unsigned long page_limit, cur_pages, new_pages; | |
| /* Don't allow more pages than we can safely lock */ | |
| page_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; | |
| do { | |
| cur_pages = atomic_long_read(&user->locked_vm); | |
| new_pages = cur_pages + nr_pages; | |
| if (new_pages > page_limit) | |
| return -ENOMEM; | |
| } while (atomic_long_cmpxchg(&user->locked_vm, cur_pages, | |
| new_pages) != cur_pages); | |
| return 0; | |
| } | |
| static void io_mem_free(void *ptr) | |
| { | |
| struct page *page; | |
| if (!ptr) | |
| return; | |
| page = virt_to_head_page(ptr); | |
| if (put_page_testzero(page)) | |
| free_compound_page(page); | |
| } | |
| static void *io_mem_alloc(size_t size) | |
| { | |
| gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP | | |
| __GFP_NORETRY; | |
| return (void *) __get_free_pages(gfp_flags, get_order(size)); | |
| } | |
| static unsigned long ring_pages(unsigned sq_entries, unsigned cq_entries) | |
| { | |
| struct io_sq_ring *sq_ring; | |
| struct io_cq_ring *cq_ring; | |
| size_t bytes; | |
| bytes = struct_size(sq_ring, array, sq_entries); | |
| bytes += array_size(sizeof(struct io_uring_sqe), sq_entries); | |
| bytes += struct_size(cq_ring, cqes, cq_entries); | |
| return (bytes + PAGE_SIZE - 1) / PAGE_SIZE; | |
| } | |
| static int io_sqe_buffer_unregister(struct io_ring_ctx *ctx) | |
| { | |
| int i, j; | |
| if (!ctx->user_bufs) | |
| return -ENXIO; | |
| for (i = 0; i < ctx->nr_user_bufs; i++) { | |
| struct io_mapped_ubuf *imu = &ctx->user_bufs[i]; | |
| for (j = 0; j < imu->nr_bvecs; j++) | |
| put_page(imu->bvec[j].bv_page); | |
| if (ctx->account_mem) | |
| io_unaccount_mem(ctx->user, imu->nr_bvecs); | |
| kvfree(imu->bvec); | |
| imu->nr_bvecs = 0; | |
| } | |
| kfree(ctx->user_bufs); | |
| ctx->user_bufs = NULL; | |
| ctx->nr_user_bufs = 0; | |
| return 0; | |
| } | |
| static int io_copy_iov(struct io_ring_ctx *ctx, struct iovec *dst, | |
| void __user *arg, unsigned index) | |
| { | |
| struct iovec __user *src; | |
| #ifdef CONFIG_COMPAT | |
| if (ctx->compat) { | |
| struct compat_iovec __user *ciovs; | |
| struct compat_iovec ciov; | |
| ciovs = (struct compat_iovec __user *) arg; | |
| if (copy_from_user(&ciov, &ciovs[index], sizeof(ciov))) | |
| return -EFAULT; | |
| dst->iov_base = (void __user *) (unsigned long) ciov.iov_base; | |
| dst->iov_len = ciov.iov_len; | |
| return 0; | |
| } | |
| #endif | |
| src = (struct iovec __user *) arg; | |
| if (copy_from_user(dst, &src[index], sizeof(*dst))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int io_sqe_buffer_register(struct io_ring_ctx *ctx, void __user *arg, | |
| unsigned nr_args) | |
| { | |
| struct vm_area_struct **vmas = NULL; | |
| struct page **pages = NULL; | |
| int i, j, got_pages = 0; | |
| int ret = -EINVAL; | |
| if (ctx->user_bufs) | |
| return -EBUSY; | |
| if (!nr_args || nr_args > UIO_MAXIOV) | |
| return -EINVAL; | |
| ctx->user_bufs = kcalloc(nr_args, sizeof(struct io_mapped_ubuf), | |
| GFP_KERNEL); | |
| if (!ctx->user_bufs) | |
| return -ENOMEM; | |
| for (i = 0; i < nr_args; i++) { | |
| struct io_mapped_ubuf *imu = &ctx->user_bufs[i]; | |
| unsigned long off, start, end, ubuf; | |
| int pret, nr_pages; | |
| struct iovec iov; | |
| size_t size; | |
| ret = io_copy_iov(ctx, &iov, arg, i); | |
| if (ret) | |
| goto err; | |
| /* | |
| * Don't impose further limits on the size and buffer | |
| * constraints here, we'll -EINVAL later when IO is | |
| * submitted if they are wrong. | |
| */ | |
| ret = -EFAULT; | |
| if (!iov.iov_base || !iov.iov_len) | |
| goto err; | |
| /* arbitrary limit, but we need something */ | |
| if (iov.iov_len > SZ_1G) | |
| goto err; | |
| ubuf = (unsigned long) iov.iov_base; | |
| end = (ubuf + iov.iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT; | |
| start = ubuf >> PAGE_SHIFT; | |
| nr_pages = end - start; | |
| if (ctx->account_mem) { | |
| ret = io_account_mem(ctx->user, nr_pages); | |
| if (ret) | |
| goto err; | |
| } | |
| ret = 0; | |
| if (!pages || nr_pages > got_pages) { | |
| kfree(vmas); | |
| kfree(pages); | |
| pages = kvmalloc_array(nr_pages, sizeof(struct page *), | |
| GFP_KERNEL); | |
| vmas = kvmalloc_array(nr_pages, | |
| sizeof(struct vm_area_struct *), | |
| GFP_KERNEL); | |
| if (!pages || !vmas) { | |
| ret = -ENOMEM; | |
| if (ctx->account_mem) | |
| io_unaccount_mem(ctx->user, nr_pages); | |
| goto err; | |
| } | |
| got_pages = nr_pages; | |
| } | |
| imu->bvec = kvmalloc_array(nr_pages, sizeof(struct bio_vec), | |
| GFP_KERNEL); | |
| ret = -ENOMEM; | |
| if (!imu->bvec) { | |
| if (ctx->account_mem) | |
| io_unaccount_mem(ctx->user, nr_pages); | |
| goto err; | |
| } | |
| ret = 0; | |
| down_read(¤t->mm->mmap_sem); | |
| pret = get_user_pages(ubuf, nr_pages, | |
| FOLL_WRITE | FOLL_LONGTERM, | |
| pages, vmas); | |
| if (pret == nr_pages) { | |
| /* don't support file backed memory */ | |
| for (j = 0; j < nr_pages; j++) { | |
| struct vm_area_struct *vma = vmas[j]; | |
| if (vma->vm_file && | |
| !is_file_hugepages(vma->vm_file)) { | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| } | |
| } else { | |
| ret = pret < 0 ? pret : -EFAULT; | |
| } | |
| up_read(¤t->mm->mmap_sem); | |
| if (ret) { | |
| /* | |
| * if we did partial map, or found file backed vmas, | |
| * release any pages we did get | |
| */ | |
| if (pret > 0) { | |
| for (j = 0; j < pret; j++) | |
| put_page(pages[j]); | |
| } | |
| if (ctx->account_mem) | |
| io_unaccount_mem(ctx->user, nr_pages); | |
| kvfree(imu->bvec); | |
| goto err; | |
| } | |
| off = ubuf & ~PAGE_MASK; | |
| size = iov.iov_len; | |
| for (j = 0; j < nr_pages; j++) { | |
| size_t vec_len; | |
| vec_len = min_t(size_t, size, PAGE_SIZE - off); | |
| imu->bvec[j].bv_page = pages[j]; | |
| imu->bvec[j].bv_len = vec_len; | |
| imu->bvec[j].bv_offset = off; | |
| off = 0; | |
| size -= vec_len; | |
| } | |
| /* store original address for later verification */ | |
| imu->ubuf = ubuf; | |
| imu->len = iov.iov_len; | |
| imu->nr_bvecs = nr_pages; | |
| ctx->nr_user_bufs++; | |
| } | |
| kvfree(pages); | |
| kvfree(vmas); | |
| return 0; | |
| err: | |
| kvfree(pages); | |
| kvfree(vmas); | |
| io_sqe_buffer_unregister(ctx); | |
| return ret; | |
| } | |
| static int io_eventfd_register(struct io_ring_ctx *ctx, void __user *arg) | |
| { | |
| __s32 __user *fds = arg; | |
| int fd; | |
| if (ctx->cq_ev_fd) | |
| return -EBUSY; | |
| if (copy_from_user(&fd, fds, sizeof(*fds))) | |
| return -EFAULT; | |
| ctx->cq_ev_fd = eventfd_ctx_fdget(fd); | |
| if (IS_ERR(ctx->cq_ev_fd)) { | |
| int ret = PTR_ERR(ctx->cq_ev_fd); | |
| ctx->cq_ev_fd = NULL; | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int io_eventfd_unregister(struct io_ring_ctx *ctx) | |
| { | |
| if (ctx->cq_ev_fd) { | |
| eventfd_ctx_put(ctx->cq_ev_fd); | |
| ctx->cq_ev_fd = NULL; | |
| return 0; | |
| } | |
| return -ENXIO; | |
| } | |
| static void io_ring_ctx_free(struct io_ring_ctx *ctx) | |
| { | |
| io_finish_async(ctx); | |
| if (ctx->sqo_mm) | |
| mmdrop(ctx->sqo_mm); | |
| io_iopoll_reap_events(ctx); | |
| io_sqe_buffer_unregister(ctx); | |
| io_sqe_files_unregister(ctx); | |
| io_eventfd_unregister(ctx); | |
| #if defined(CONFIG_UNIX) | |
| if (ctx->ring_sock) { | |
| ctx->ring_sock->file = NULL; /* so that iput() is called */ | |
| sock_release(ctx->ring_sock); | |
| } | |
| #endif | |
| io_mem_free(ctx->sq_ring); | |
| io_mem_free(ctx->sq_sqes); | |
| io_mem_free(ctx->cq_ring); | |
| percpu_ref_exit(&ctx->refs); | |
| if (ctx->account_mem) | |
| io_unaccount_mem(ctx->user, | |
| ring_pages(ctx->sq_entries, ctx->cq_entries)); | |
| free_uid(ctx->user); | |
| kfree(ctx); | |
| } | |
| static __poll_t io_uring_poll(struct file *file, poll_table *wait) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| __poll_t mask = 0; | |
| poll_wait(file, &ctx->cq_wait, wait); | |
| /* | |
| * synchronizes with barrier from wq_has_sleeper call in | |
| * io_commit_cqring | |
| */ | |
| smp_rmb(); | |
| if (READ_ONCE(ctx->sq_ring->r.tail) - ctx->cached_sq_head != | |
| ctx->sq_ring->ring_entries) | |
| mask |= EPOLLOUT | EPOLLWRNORM; | |
| if (READ_ONCE(ctx->cq_ring->r.head) != ctx->cached_cq_tail) | |
| mask |= EPOLLIN | EPOLLRDNORM; | |
| return mask; | |
| } | |
| static int io_uring_fasync(int fd, struct file *file, int on) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| return fasync_helper(fd, file, on, &ctx->cq_fasync); | |
| } | |
| static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx) | |
| { | |
| mutex_lock(&ctx->uring_lock); | |
| percpu_ref_kill(&ctx->refs); | |
| mutex_unlock(&ctx->uring_lock); | |
| io_poll_remove_all(ctx); | |
| io_iopoll_reap_events(ctx); | |
| wait_for_completion(&ctx->ctx_done); | |
| io_ring_ctx_free(ctx); | |
| } | |
| static int io_uring_release(struct inode *inode, struct file *file) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| file->private_data = NULL; | |
| io_ring_ctx_wait_and_kill(ctx); | |
| return 0; | |
| } | |
| static int io_uring_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| loff_t offset = (loff_t) vma->vm_pgoff << PAGE_SHIFT; | |
| unsigned long sz = vma->vm_end - vma->vm_start; | |
| struct io_ring_ctx *ctx = file->private_data; | |
| unsigned long pfn; | |
| struct page *page; | |
| void *ptr; | |
| switch (offset) { | |
| case IORING_OFF_SQ_RING: | |
| ptr = ctx->sq_ring; | |
| break; | |
| case IORING_OFF_SQES: | |
| ptr = ctx->sq_sqes; | |
| break; | |
| case IORING_OFF_CQ_RING: | |
| ptr = ctx->cq_ring; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| page = virt_to_head_page(ptr); | |
| if (sz > (PAGE_SIZE << compound_order(page))) | |
| return -EINVAL; | |
| pfn = virt_to_phys(ptr) >> PAGE_SHIFT; | |
| return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot); | |
| } | |
| SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, | |
| u32, min_complete, u32, flags, const sigset_t __user *, sig, | |
| size_t, sigsz) | |
| { | |
| struct io_ring_ctx *ctx; | |
| long ret = -EBADF; | |
| int submitted = 0; | |
| struct fd f; | |
| if (flags & ~(IORING_ENTER_GETEVENTS | IORING_ENTER_SQ_WAKEUP)) | |
| return -EINVAL; | |
| f = fdget(fd); | |
| if (!f.file) | |
| return -EBADF; | |
| ret = -EOPNOTSUPP; | |
| if (f.file->f_op != &io_uring_fops) | |
| goto out_fput; | |
| ret = -ENXIO; | |
| ctx = f.file->private_data; | |
| if (!percpu_ref_tryget(&ctx->refs)) | |
| goto out_fput; | |
| /* | |
| * For SQ polling, the thread will do all submissions and completions. | |
| * Just return the requested submit count, and wake the thread if | |
| * we were asked to. | |
| */ | |
| if (ctx->flags & IORING_SETUP_SQPOLL) { | |
| if (flags & IORING_ENTER_SQ_WAKEUP) | |
| wake_up(&ctx->sqo_wait); | |
| submitted = to_submit; | |
| goto out_ctx; | |
| } | |
| ret = 0; | |
| if (to_submit) { | |
| to_submit = min(to_submit, ctx->sq_entries); | |
| mutex_lock(&ctx->uring_lock); | |
| submitted = io_ring_submit(ctx, to_submit); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| if (flags & IORING_ENTER_GETEVENTS) { | |
| unsigned nr_events = 0; | |
| min_complete = min(min_complete, ctx->cq_entries); | |
| if (ctx->flags & IORING_SETUP_IOPOLL) { | |
| mutex_lock(&ctx->uring_lock); | |
| ret = io_iopoll_check(ctx, &nr_events, min_complete); | |
| mutex_unlock(&ctx->uring_lock); | |
| } else { | |
| ret = io_cqring_wait(ctx, min_complete, sig, sigsz); | |
| } | |
| } | |
| out_ctx: | |
| io_ring_drop_ctx_refs(ctx, 1); | |
| out_fput: | |
| fdput(f); | |
| return submitted ? submitted : ret; | |
| } | |
| static const struct file_operations io_uring_fops = { | |
| .release = io_uring_release, | |
| .mmap = io_uring_mmap, | |
| .poll = io_uring_poll, | |
| .fasync = io_uring_fasync, | |
| }; | |
| static int io_allocate_scq_urings(struct io_ring_ctx *ctx, | |
| struct io_uring_params *p) | |
| { | |
| struct io_sq_ring *sq_ring; | |
| struct io_cq_ring *cq_ring; | |
| size_t size; | |
| sq_ring = io_mem_alloc(struct_size(sq_ring, array, p->sq_entries)); | |
| if (!sq_ring) | |
| return -ENOMEM; | |
| ctx->sq_ring = sq_ring; | |
| sq_ring->ring_mask = p->sq_entries - 1; | |
| sq_ring->ring_entries = p->sq_entries; | |
| ctx->sq_mask = sq_ring->ring_mask; | |
| ctx->sq_entries = sq_ring->ring_entries; | |
| size = array_size(sizeof(struct io_uring_sqe), p->sq_entries); | |
| if (size == SIZE_MAX) | |
| return -EOVERFLOW; | |
| ctx->sq_sqes = io_mem_alloc(size); | |
| if (!ctx->sq_sqes) | |
| return -ENOMEM; | |
| cq_ring = io_mem_alloc(struct_size(cq_ring, cqes, p->cq_entries)); | |
| if (!cq_ring) | |
| return -ENOMEM; | |
| ctx->cq_ring = cq_ring; | |
| cq_ring->ring_mask = p->cq_entries - 1; | |
| cq_ring->ring_entries = p->cq_entries; | |
| ctx->cq_mask = cq_ring->ring_mask; | |
| ctx->cq_entries = cq_ring->ring_entries; | |
| return 0; | |
| } | |
| /* | |
| * Allocate an anonymous fd, this is what constitutes the application | |
| * visible backing of an io_uring instance. The application mmaps this | |
| * fd to gain access to the SQ/CQ ring details. If UNIX sockets are enabled, | |
| * we have to tie this fd to a socket for file garbage collection purposes. | |
| */ | |
| static int io_uring_get_fd(struct io_ring_ctx *ctx) | |
| { | |
| struct file *file; | |
| int ret; | |
| #if defined(CONFIG_UNIX) | |
| ret = sock_create_kern(&init_net, PF_UNIX, SOCK_RAW, IPPROTO_IP, | |
| &ctx->ring_sock); | |
| if (ret) | |
| return ret; | |
| #endif | |
| ret = get_unused_fd_flags(O_RDWR | O_CLOEXEC); | |
| if (ret < 0) | |
| goto err; | |
| file = anon_inode_getfile("[io_uring]", &io_uring_fops, ctx, | |
| O_RDWR | O_CLOEXEC); | |
| if (IS_ERR(file)) { | |
| put_unused_fd(ret); | |
| ret = PTR_ERR(file); | |
| goto err; | |
| } | |
| #if defined(CONFIG_UNIX) | |
| ctx->ring_sock->file = file; | |
| ctx->ring_sock->sk->sk_user_data = ctx; | |
| #endif | |
| fd_install(ret, file); | |
| return ret; | |
| err: | |
| #if defined(CONFIG_UNIX) | |
| sock_release(ctx->ring_sock); | |
| ctx->ring_sock = NULL; | |
| #endif | |
| return ret; | |
| } | |
| static int io_uring_create(unsigned entries, struct io_uring_params *p) | |
| { | |
| struct user_struct *user = NULL; | |
| struct io_ring_ctx *ctx; | |
| bool account_mem; | |
| int ret; | |
| if (!entries || entries > IORING_MAX_ENTRIES) | |
| return -EINVAL; | |
| /* | |
| * Use twice as many entries for the CQ ring. It's possible for the | |
| * application to drive a higher depth than the size of the SQ ring, | |
| * since the sqes are only used at submission time. This allows for | |
| * some flexibility in overcommitting a bit. | |
| */ | |
| p->sq_entries = roundup_pow_of_two(entries); | |
| p->cq_entries = 2 * p->sq_entries; | |
| user = get_uid(current_user()); | |
| account_mem = !capable(CAP_IPC_LOCK); | |
| if (account_mem) { | |
| ret = io_account_mem(user, | |
| ring_pages(p->sq_entries, p->cq_entries)); | |
| if (ret) { | |
| free_uid(user); | |
| return ret; | |
| } | |
| } | |
| ctx = io_ring_ctx_alloc(p); | |
| if (!ctx) { | |
| if (account_mem) | |
| io_unaccount_mem(user, ring_pages(p->sq_entries, | |
| p->cq_entries)); | |
| free_uid(user); | |
| return -ENOMEM; | |
| } | |
| ctx->compat = in_compat_syscall(); | |
| ctx->account_mem = account_mem; | |
| ctx->user = user; | |
| ret = io_allocate_scq_urings(ctx, p); | |
| if (ret) | |
| goto err; | |
| ret = io_sq_offload_start(ctx, p); | |
| if (ret) | |
| goto err; | |
| ret = io_uring_get_fd(ctx); | |
| if (ret < 0) | |
| goto err; | |
| memset(&p->sq_off, 0, sizeof(p->sq_off)); | |
| p->sq_off.head = offsetof(struct io_sq_ring, r.head); | |
| p->sq_off.tail = offsetof(struct io_sq_ring, r.tail); | |
| p->sq_off.ring_mask = offsetof(struct io_sq_ring, ring_mask); | |
| p->sq_off.ring_entries = offsetof(struct io_sq_ring, ring_entries); | |
| p->sq_off.flags = offsetof(struct io_sq_ring, flags); | |
| p->sq_off.dropped = offsetof(struct io_sq_ring, dropped); | |
| p->sq_off.array = offsetof(struct io_sq_ring, array); | |
| memset(&p->cq_off, 0, sizeof(p->cq_off)); | |
| p->cq_off.head = offsetof(struct io_cq_ring, r.head); | |
| p->cq_off.tail = offsetof(struct io_cq_ring, r.tail); | |
| p->cq_off.ring_mask = offsetof(struct io_cq_ring, ring_mask); | |
| p->cq_off.ring_entries = offsetof(struct io_cq_ring, ring_entries); | |
| p->cq_off.overflow = offsetof(struct io_cq_ring, overflow); | |
| p->cq_off.cqes = offsetof(struct io_cq_ring, cqes); | |
| return ret; | |
| err: | |
| io_ring_ctx_wait_and_kill(ctx); | |
| return ret; | |
| } | |
| /* | |
| * Sets up an aio uring context, and returns the fd. Applications asks for a | |
| * ring size, we return the actual sq/cq ring sizes (among other things) in the | |
| * params structure passed in. | |
| */ | |
| static long io_uring_setup(u32 entries, struct io_uring_params __user *params) | |
| { | |
| struct io_uring_params p; | |
| long ret; | |
| int i; | |
| if (copy_from_user(&p, params, sizeof(p))) | |
| return -EFAULT; | |
| for (i = 0; i < ARRAY_SIZE(p.resv); i++) { | |
| if (p.resv[i]) | |
| return -EINVAL; | |
| } | |
| if (p.flags & ~(IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL | | |
| IORING_SETUP_SQ_AFF)) | |
| return -EINVAL; | |
| ret = io_uring_create(entries, &p); | |
| if (ret < 0) | |
| return ret; | |
| if (copy_to_user(params, &p, sizeof(p))) | |
| return -EFAULT; | |
| return ret; | |
| } | |
| SYSCALL_DEFINE2(io_uring_setup, u32, entries, | |
| struct io_uring_params __user *, params) | |
| { | |
| return io_uring_setup(entries, params); | |
| } | |
| static int __io_uring_register(struct io_ring_ctx *ctx, unsigned opcode, | |
| void __user *arg, unsigned nr_args) | |
| __releases(ctx->uring_lock) | |
| __acquires(ctx->uring_lock) | |
| { | |
| int ret; | |
| /* | |
| * We're inside the ring mutex, if the ref is already dying, then | |
| * someone else killed the ctx or is already going through | |
| * io_uring_register(). | |
| */ | |
| if (percpu_ref_is_dying(&ctx->refs)) | |
| return -ENXIO; | |
| percpu_ref_kill(&ctx->refs); | |
| /* | |
| * Drop uring mutex before waiting for references to exit. If another | |
| * thread is currently inside io_uring_enter() it might need to grab | |
| * the uring_lock to make progress. If we hold it here across the drain | |
| * wait, then we can deadlock. It's safe to drop the mutex here, since | |
| * no new references will come in after we've killed the percpu ref. | |
| */ | |
| mutex_unlock(&ctx->uring_lock); | |
| wait_for_completion(&ctx->ctx_done); | |
| mutex_lock(&ctx->uring_lock); | |
| switch (opcode) { | |
| case IORING_REGISTER_BUFFERS: | |
| ret = io_sqe_buffer_register(ctx, arg, nr_args); | |
| break; | |
| case IORING_UNREGISTER_BUFFERS: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_sqe_buffer_unregister(ctx); | |
| break; | |
| case IORING_REGISTER_FILES: | |
| ret = io_sqe_files_register(ctx, arg, nr_args); | |
| break; | |
| case IORING_UNREGISTER_FILES: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_sqe_files_unregister(ctx); | |
| break; | |
| case IORING_REGISTER_EVENTFD: | |
| ret = -EINVAL; | |
| if (nr_args != 1) | |
| break; | |
| ret = io_eventfd_register(ctx, arg); | |
| break; | |
| case IORING_UNREGISTER_EVENTFD: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_eventfd_unregister(ctx); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| /* bring the ctx back to life */ | |
| reinit_completion(&ctx->ctx_done); | |
| percpu_ref_reinit(&ctx->refs); | |
| return ret; | |
| } | |
| SYSCALL_DEFINE4(io_uring_register, unsigned int, fd, unsigned int, opcode, | |
| void __user *, arg, unsigned int, nr_args) | |
| { | |
| struct io_ring_ctx *ctx; | |
| long ret = -EBADF; | |
| struct fd f; | |
| f = fdget(fd); | |
| if (!f.file) | |
| return -EBADF; | |
| ret = -EOPNOTSUPP; | |
| if (f.file->f_op != &io_uring_fops) | |
| goto out_fput; | |
| ctx = f.file->private_data; | |
| mutex_lock(&ctx->uring_lock); | |
| ret = __io_uring_register(ctx, opcode, arg, nr_args); | |
| mutex_unlock(&ctx->uring_lock); | |
| out_fput: | |
| fdput(f); | |
| return ret; | |
| } | |
| static int __init io_uring_init(void) | |
| { | |
| req_cachep = KMEM_CACHE(io_kiocb, SLAB_HWCACHE_ALIGN | SLAB_PANIC); | |
| return 0; | |
| }; | |
| __initcall(io_uring_init); |