| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Dynamic DMA mapping support. | |
| * | |
| * This implementation is a fallback for platforms that do not support | |
| * I/O TLBs (aka DMA address translation hardware). | |
| * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com> | |
| * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com> | |
| * Copyright (C) 2000, 2003 Hewlett-Packard Co | |
| * David Mosberger-Tang <davidm@hpl.hp.com> | |
| * | |
| * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API. | |
| * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid | |
| * unnecessary i-cache flushing. | |
| * 04/07/.. ak Better overflow handling. Assorted fixes. | |
| * 05/09/10 linville Add support for syncing ranges, support syncing for | |
| * DMA_BIDIRECTIONAL mappings, miscellaneous cleanup. | |
| * 08/12/11 beckyb Add highmem support | |
| */ | |
| #define pr_fmt(fmt) "software IO TLB: " fmt | |
| #include <linux/cache.h> | |
| #include <linux/dma-direct.h> | |
| #include <linux/mm.h> | |
| #include <linux/export.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/string.h> | |
| #include <linux/swiotlb.h> | |
| #include <linux/pfn.h> | |
| #include <linux/types.h> | |
| #include <linux/ctype.h> | |
| #include <linux/highmem.h> | |
| #include <linux/gfp.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/mem_encrypt.h> | |
| #include <linux/set_memory.h> | |
| #ifdef CONFIG_DEBUG_FS | |
| #include <linux/debugfs.h> | |
| #endif | |
| #include <asm/io.h> | |
| #include <asm/dma.h> | |
| #include <linux/init.h> | |
| #include <linux/memblock.h> | |
| #include <linux/iommu-helper.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/swiotlb.h> | |
| #define OFFSET(val,align) ((unsigned long) \ | |
| ( (val) & ( (align) - 1))) | |
| #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) | |
| /* | |
| * Minimum IO TLB size to bother booting with. Systems with mainly | |
| * 64bit capable cards will only lightly use the swiotlb. If we can't | |
| * allocate a contiguous 1MB, we're probably in trouble anyway. | |
| */ | |
| #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) | |
| enum swiotlb_force swiotlb_force; | |
| /* | |
| * Used to do a quick range check in swiotlb_tbl_unmap_single and | |
| * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this | |
| * API. | |
| */ | |
| phys_addr_t io_tlb_start, io_tlb_end; | |
| /* | |
| * The number of IO TLB blocks (in groups of 64) between io_tlb_start and | |
| * io_tlb_end. This is command line adjustable via setup_io_tlb_npages. | |
| */ | |
| static unsigned long io_tlb_nslabs; | |
| /* | |
| * The number of used IO TLB block | |
| */ | |
| static unsigned long io_tlb_used; | |
| /* | |
| * This is a free list describing the number of free entries available from | |
| * each index | |
| */ | |
| static unsigned int *io_tlb_list; | |
| static unsigned int io_tlb_index; | |
| /* | |
| * Max segment that we can provide which (if pages are contingous) will | |
| * not be bounced (unless SWIOTLB_FORCE is set). | |
| */ | |
| unsigned int max_segment; | |
| /* | |
| * We need to save away the original address corresponding to a mapped entry | |
| * for the sync operations. | |
| */ | |
| #define INVALID_PHYS_ADDR (~(phys_addr_t)0) | |
| static phys_addr_t *io_tlb_orig_addr; | |
| /* | |
| * Protect the above data structures in the map and unmap calls | |
| */ | |
| static DEFINE_SPINLOCK(io_tlb_lock); | |
| static int late_alloc; | |
| static int __init | |
| setup_io_tlb_npages(char *str) | |
| { | |
| if (isdigit(*str)) { | |
| io_tlb_nslabs = simple_strtoul(str, &str, 0); | |
| /* avoid tail segment of size < IO_TLB_SEGSIZE */ | |
| io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); | |
| } | |
| if (*str == ',') | |
| ++str; | |
| if (!strcmp(str, "force")) { | |
| swiotlb_force = SWIOTLB_FORCE; | |
| } else if (!strcmp(str, "noforce")) { | |
| swiotlb_force = SWIOTLB_NO_FORCE; | |
| io_tlb_nslabs = 1; | |
| } | |
| return 0; | |
| } | |
| early_param("swiotlb", setup_io_tlb_npages); | |
| static bool no_iotlb_memory; | |
| unsigned long swiotlb_nr_tbl(void) | |
| { | |
| return unlikely(no_iotlb_memory) ? 0 : io_tlb_nslabs; | |
| } | |
| EXPORT_SYMBOL_GPL(swiotlb_nr_tbl); | |
| unsigned int swiotlb_max_segment(void) | |
| { | |
| return unlikely(no_iotlb_memory) ? 0 : max_segment; | |
| } | |
| EXPORT_SYMBOL_GPL(swiotlb_max_segment); | |
| void swiotlb_set_max_segment(unsigned int val) | |
| { | |
| if (swiotlb_force == SWIOTLB_FORCE) | |
| max_segment = 1; | |
| else | |
| max_segment = rounddown(val, PAGE_SIZE); | |
| } | |
| /* default to 64MB */ | |
| #define IO_TLB_DEFAULT_SIZE (64UL<<20) | |
| unsigned long swiotlb_size_or_default(void) | |
| { | |
| unsigned long size; | |
| size = io_tlb_nslabs << IO_TLB_SHIFT; | |
| return size ? size : (IO_TLB_DEFAULT_SIZE); | |
| } | |
| void swiotlb_print_info(void) | |
| { | |
| unsigned long bytes = io_tlb_nslabs << IO_TLB_SHIFT; | |
| if (no_iotlb_memory) { | |
| pr_warn("No low mem\n"); | |
| return; | |
| } | |
| pr_info("mapped [mem %#010llx-%#010llx] (%luMB)\n", | |
| (unsigned long long)io_tlb_start, | |
| (unsigned long long)io_tlb_end, | |
| bytes >> 20); | |
| } | |
| /* | |
| * Early SWIOTLB allocation may be too early to allow an architecture to | |
| * perform the desired operations. This function allows the architecture to | |
| * call SWIOTLB when the operations are possible. It needs to be called | |
| * before the SWIOTLB memory is used. | |
| */ | |
| void __init swiotlb_update_mem_attributes(void) | |
| { | |
| void *vaddr; | |
| unsigned long bytes; | |
| if (no_iotlb_memory || late_alloc) | |
| return; | |
| vaddr = phys_to_virt(io_tlb_start); | |
| bytes = PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT); | |
| set_memory_decrypted((unsigned long)vaddr, bytes >> PAGE_SHIFT); | |
| memset(vaddr, 0, bytes); | |
| } | |
| int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose) | |
| { | |
| unsigned long i, bytes; | |
| size_t alloc_size; | |
| bytes = nslabs << IO_TLB_SHIFT; | |
| io_tlb_nslabs = nslabs; | |
| io_tlb_start = __pa(tlb); | |
| io_tlb_end = io_tlb_start + bytes; | |
| /* | |
| * Allocate and initialize the free list array. This array is used | |
| * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE | |
| * between io_tlb_start and io_tlb_end. | |
| */ | |
| alloc_size = PAGE_ALIGN(io_tlb_nslabs * sizeof(int)); | |
| io_tlb_list = memblock_alloc(alloc_size, PAGE_SIZE); | |
| if (!io_tlb_list) | |
| panic("%s: Failed to allocate %zu bytes align=0x%lx\n", | |
| __func__, alloc_size, PAGE_SIZE); | |
| alloc_size = PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)); | |
| io_tlb_orig_addr = memblock_alloc(alloc_size, PAGE_SIZE); | |
| if (!io_tlb_orig_addr) | |
| panic("%s: Failed to allocate %zu bytes align=0x%lx\n", | |
| __func__, alloc_size, PAGE_SIZE); | |
| for (i = 0; i < io_tlb_nslabs; i++) { | |
| io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); | |
| io_tlb_orig_addr[i] = INVALID_PHYS_ADDR; | |
| } | |
| io_tlb_index = 0; | |
| if (verbose) | |
| swiotlb_print_info(); | |
| swiotlb_set_max_segment(io_tlb_nslabs << IO_TLB_SHIFT); | |
| return 0; | |
| } | |
| /* | |
| * Statically reserve bounce buffer space and initialize bounce buffer data | |
| * structures for the software IO TLB used to implement the DMA API. | |
| */ | |
| void __init | |
| swiotlb_init(int verbose) | |
| { | |
| size_t default_size = IO_TLB_DEFAULT_SIZE; | |
| unsigned char *vstart; | |
| unsigned long bytes; | |
| if (!io_tlb_nslabs) { | |
| io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); | |
| io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); | |
| } | |
| bytes = io_tlb_nslabs << IO_TLB_SHIFT; | |
| /* Get IO TLB memory from the low pages */ | |
| vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE); | |
| if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose)) | |
| return; | |
| if (io_tlb_start) | |
| memblock_free_early(io_tlb_start, | |
| PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT)); | |
| pr_warn("Cannot allocate buffer"); | |
| no_iotlb_memory = true; | |
| } | |
| /* | |
| * Systems with larger DMA zones (those that don't support ISA) can | |
| * initialize the swiotlb later using the slab allocator if needed. | |
| * This should be just like above, but with some error catching. | |
| */ | |
| int | |
| swiotlb_late_init_with_default_size(size_t default_size) | |
| { | |
| unsigned long bytes, req_nslabs = io_tlb_nslabs; | |
| unsigned char *vstart = NULL; | |
| unsigned int order; | |
| int rc = 0; | |
| if (!io_tlb_nslabs) { | |
| io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); | |
| io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); | |
| } | |
| /* | |
| * Get IO TLB memory from the low pages | |
| */ | |
| order = get_order(io_tlb_nslabs << IO_TLB_SHIFT); | |
| io_tlb_nslabs = SLABS_PER_PAGE << order; | |
| bytes = io_tlb_nslabs << IO_TLB_SHIFT; | |
| while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { | |
| vstart = (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, | |
| order); | |
| if (vstart) | |
| break; | |
| order--; | |
| } | |
| if (!vstart) { | |
| io_tlb_nslabs = req_nslabs; | |
| return -ENOMEM; | |
| } | |
| if (order != get_order(bytes)) { | |
| pr_warn("only able to allocate %ld MB\n", | |
| (PAGE_SIZE << order) >> 20); | |
| io_tlb_nslabs = SLABS_PER_PAGE << order; | |
| } | |
| rc = swiotlb_late_init_with_tbl(vstart, io_tlb_nslabs); | |
| if (rc) | |
| free_pages((unsigned long)vstart, order); | |
| return rc; | |
| } | |
| static void swiotlb_cleanup(void) | |
| { | |
| io_tlb_end = 0; | |
| io_tlb_start = 0; | |
| io_tlb_nslabs = 0; | |
| max_segment = 0; | |
| } | |
| int | |
| swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs) | |
| { | |
| unsigned long i, bytes; | |
| bytes = nslabs << IO_TLB_SHIFT; | |
| io_tlb_nslabs = nslabs; | |
| io_tlb_start = virt_to_phys(tlb); | |
| io_tlb_end = io_tlb_start + bytes; | |
| set_memory_decrypted((unsigned long)tlb, bytes >> PAGE_SHIFT); | |
| memset(tlb, 0, bytes); | |
| /* | |
| * Allocate and initialize the free list array. This array is used | |
| * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE | |
| * between io_tlb_start and io_tlb_end. | |
| */ | |
| io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, | |
| get_order(io_tlb_nslabs * sizeof(int))); | |
| if (!io_tlb_list) | |
| goto cleanup3; | |
| io_tlb_orig_addr = (phys_addr_t *) | |
| __get_free_pages(GFP_KERNEL, | |
| get_order(io_tlb_nslabs * | |
| sizeof(phys_addr_t))); | |
| if (!io_tlb_orig_addr) | |
| goto cleanup4; | |
| for (i = 0; i < io_tlb_nslabs; i++) { | |
| io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); | |
| io_tlb_orig_addr[i] = INVALID_PHYS_ADDR; | |
| } | |
| io_tlb_index = 0; | |
| swiotlb_print_info(); | |
| late_alloc = 1; | |
| swiotlb_set_max_segment(io_tlb_nslabs << IO_TLB_SHIFT); | |
| return 0; | |
| cleanup4: | |
| free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * | |
| sizeof(int))); | |
| io_tlb_list = NULL; | |
| cleanup3: | |
| swiotlb_cleanup(); | |
| return -ENOMEM; | |
| } | |
| void __init swiotlb_exit(void) | |
| { | |
| if (!io_tlb_orig_addr) | |
| return; | |
| if (late_alloc) { | |
| free_pages((unsigned long)io_tlb_orig_addr, | |
| get_order(io_tlb_nslabs * sizeof(phys_addr_t))); | |
| free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * | |
| sizeof(int))); | |
| free_pages((unsigned long)phys_to_virt(io_tlb_start), | |
| get_order(io_tlb_nslabs << IO_TLB_SHIFT)); | |
| } else { | |
| memblock_free_late(__pa(io_tlb_orig_addr), | |
| PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t))); | |
| memblock_free_late(__pa(io_tlb_list), | |
| PAGE_ALIGN(io_tlb_nslabs * sizeof(int))); | |
| memblock_free_late(io_tlb_start, | |
| PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT)); | |
| } | |
| swiotlb_cleanup(); | |
| } | |
| /* | |
| * Bounce: copy the swiotlb buffer from or back to the original dma location | |
| */ | |
| static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr, | |
| size_t size, enum dma_data_direction dir) | |
| { | |
| unsigned long pfn = PFN_DOWN(orig_addr); | |
| unsigned char *vaddr = phys_to_virt(tlb_addr); | |
| if (PageHighMem(pfn_to_page(pfn))) { | |
| /* The buffer does not have a mapping. Map it in and copy */ | |
| unsigned int offset = orig_addr & ~PAGE_MASK; | |
| char *buffer; | |
| unsigned int sz = 0; | |
| unsigned long flags; | |
| while (size) { | |
| sz = min_t(size_t, PAGE_SIZE - offset, size); | |
| local_irq_save(flags); | |
| buffer = kmap_atomic(pfn_to_page(pfn)); | |
| if (dir == DMA_TO_DEVICE) | |
| memcpy(vaddr, buffer + offset, sz); | |
| else | |
| memcpy(buffer + offset, vaddr, sz); | |
| kunmap_atomic(buffer); | |
| local_irq_restore(flags); | |
| size -= sz; | |
| pfn++; | |
| vaddr += sz; | |
| offset = 0; | |
| } | |
| } else if (dir == DMA_TO_DEVICE) { | |
| memcpy(vaddr, phys_to_virt(orig_addr), size); | |
| } else { | |
| memcpy(phys_to_virt(orig_addr), vaddr, size); | |
| } | |
| } | |
| phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, | |
| dma_addr_t tbl_dma_addr, | |
| phys_addr_t orig_addr, size_t size, | |
| enum dma_data_direction dir, | |
| unsigned long attrs) | |
| { | |
| unsigned long flags; | |
| phys_addr_t tlb_addr; | |
| unsigned int nslots, stride, index, wrap; | |
| int i; | |
| unsigned long mask; | |
| unsigned long offset_slots; | |
| unsigned long max_slots; | |
| unsigned long tmp_io_tlb_used; | |
| if (no_iotlb_memory) | |
| panic("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer"); | |
| if (mem_encrypt_active()) | |
| pr_warn_once("%s is active and system is using DMA bounce buffers\n", | |
| sme_active() ? "SME" : "SEV"); | |
| mask = dma_get_seg_boundary(hwdev); | |
| tbl_dma_addr &= mask; | |
| offset_slots = ALIGN(tbl_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; | |
| /* | |
| * Carefully handle integer overflow which can occur when mask == ~0UL. | |
| */ | |
| max_slots = mask + 1 | |
| ? ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT | |
| : 1UL << (BITS_PER_LONG - IO_TLB_SHIFT); | |
| /* | |
| * For mappings greater than or equal to a page, we limit the stride | |
| * (and hence alignment) to a page size. | |
| */ | |
| nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; | |
| if (size >= PAGE_SIZE) | |
| stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT)); | |
| else | |
| stride = 1; | |
| BUG_ON(!nslots); | |
| /* | |
| * Find suitable number of IO TLB entries size that will fit this | |
| * request and allocate a buffer from that IO TLB pool. | |
| */ | |
| spin_lock_irqsave(&io_tlb_lock, flags); | |
| if (unlikely(nslots > io_tlb_nslabs - io_tlb_used)) | |
| goto not_found; | |
| index = ALIGN(io_tlb_index, stride); | |
| if (index >= io_tlb_nslabs) | |
| index = 0; | |
| wrap = index; | |
| do { | |
| while (iommu_is_span_boundary(index, nslots, offset_slots, | |
| max_slots)) { | |
| index += stride; | |
| if (index >= io_tlb_nslabs) | |
| index = 0; | |
| if (index == wrap) | |
| goto not_found; | |
| } | |
| /* | |
| * If we find a slot that indicates we have 'nslots' number of | |
| * contiguous buffers, we allocate the buffers from that slot | |
| * and mark the entries as '0' indicating unavailable. | |
| */ | |
| if (io_tlb_list[index] >= nslots) { | |
| int count = 0; | |
| for (i = index; i < (int) (index + nslots); i++) | |
| io_tlb_list[i] = 0; | |
| for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE - 1) && io_tlb_list[i]; i--) | |
| io_tlb_list[i] = ++count; | |
| tlb_addr = io_tlb_start + (index << IO_TLB_SHIFT); | |
| /* | |
| * Update the indices to avoid searching in the next | |
| * round. | |
| */ | |
| io_tlb_index = ((index + nslots) < io_tlb_nslabs | |
| ? (index + nslots) : 0); | |
| goto found; | |
| } | |
| index += stride; | |
| if (index >= io_tlb_nslabs) | |
| index = 0; | |
| } while (index != wrap); | |
| not_found: | |
| tmp_io_tlb_used = io_tlb_used; | |
| spin_unlock_irqrestore(&io_tlb_lock, flags); | |
| if (!(attrs & DMA_ATTR_NO_WARN) && printk_ratelimit()) | |
| dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n", | |
| size, io_tlb_nslabs, tmp_io_tlb_used); | |
| return (phys_addr_t)DMA_MAPPING_ERROR; | |
| found: | |
| io_tlb_used += nslots; | |
| spin_unlock_irqrestore(&io_tlb_lock, flags); | |
| /* | |
| * Save away the mapping from the original address to the DMA address. | |
| * This is needed when we sync the memory. Then we sync the buffer if | |
| * needed. | |
| */ | |
| for (i = 0; i < nslots; i++) | |
| io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT); | |
| if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && | |
| (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) | |
| swiotlb_bounce(orig_addr, tlb_addr, size, DMA_TO_DEVICE); | |
| return tlb_addr; | |
| } | |
| /* | |
| * tlb_addr is the physical address of the bounce buffer to unmap. | |
| */ | |
| void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr, | |
| size_t size, enum dma_data_direction dir, | |
| unsigned long attrs) | |
| { | |
| unsigned long flags; | |
| int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; | |
| int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT; | |
| phys_addr_t orig_addr = io_tlb_orig_addr[index]; | |
| /* | |
| * First, sync the memory before unmapping the entry | |
| */ | |
| if (orig_addr != INVALID_PHYS_ADDR && | |
| !(attrs & DMA_ATTR_SKIP_CPU_SYNC) && | |
| ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL))) | |
| swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE); | |
| /* | |
| * Return the buffer to the free list by setting the corresponding | |
| * entries to indicate the number of contiguous entries available. | |
| * While returning the entries to the free list, we merge the entries | |
| * with slots below and above the pool being returned. | |
| */ | |
| spin_lock_irqsave(&io_tlb_lock, flags); | |
| { | |
| count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ? | |
| io_tlb_list[index + nslots] : 0); | |
| /* | |
| * Step 1: return the slots to the free list, merging the | |
| * slots with superceeding slots | |
| */ | |
| for (i = index + nslots - 1; i >= index; i--) { | |
| io_tlb_list[i] = ++count; | |
| io_tlb_orig_addr[i] = INVALID_PHYS_ADDR; | |
| } | |
| /* | |
| * Step 2: merge the returned slots with the preceding slots, | |
| * if available (non zero) | |
| */ | |
| for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) | |
| io_tlb_list[i] = ++count; | |
| io_tlb_used -= nslots; | |
| } | |
| spin_unlock_irqrestore(&io_tlb_lock, flags); | |
| } | |
| void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr, | |
| size_t size, enum dma_data_direction dir, | |
| enum dma_sync_target target) | |
| { | |
| int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT; | |
| phys_addr_t orig_addr = io_tlb_orig_addr[index]; | |
| if (orig_addr == INVALID_PHYS_ADDR) | |
| return; | |
| orig_addr += (unsigned long)tlb_addr & ((1 << IO_TLB_SHIFT) - 1); | |
| switch (target) { | |
| case SYNC_FOR_CPU: | |
| if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)) | |
| swiotlb_bounce(orig_addr, tlb_addr, | |
| size, DMA_FROM_DEVICE); | |
| else | |
| BUG_ON(dir != DMA_TO_DEVICE); | |
| break; | |
| case SYNC_FOR_DEVICE: | |
| if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) | |
| swiotlb_bounce(orig_addr, tlb_addr, | |
| size, DMA_TO_DEVICE); | |
| else | |
| BUG_ON(dir != DMA_FROM_DEVICE); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| /* | |
| * Create a swiotlb mapping for the buffer at @phys, and in case of DMAing | |
| * to the device copy the data into it as well. | |
| */ | |
| bool swiotlb_map(struct device *dev, phys_addr_t *phys, dma_addr_t *dma_addr, | |
| size_t size, enum dma_data_direction dir, unsigned long attrs) | |
| { | |
| trace_swiotlb_bounced(dev, *dma_addr, size, swiotlb_force); | |
| if (unlikely(swiotlb_force == SWIOTLB_NO_FORCE)) { | |
| dev_warn_ratelimited(dev, | |
| "Cannot do DMA to address %pa\n", phys); | |
| return false; | |
| } | |
| /* Oh well, have to allocate and map a bounce buffer. */ | |
| *phys = swiotlb_tbl_map_single(dev, __phys_to_dma(dev, io_tlb_start), | |
| *phys, size, dir, attrs); | |
| if (*phys == (phys_addr_t)DMA_MAPPING_ERROR) | |
| return false; | |
| /* Ensure that the address returned is DMA'ble */ | |
| *dma_addr = __phys_to_dma(dev, *phys); | |
| if (unlikely(!dma_capable(dev, *dma_addr, size))) { | |
| swiotlb_tbl_unmap_single(dev, *phys, size, dir, | |
| attrs | DMA_ATTR_SKIP_CPU_SYNC); | |
| return false; | |
| } | |
| return true; | |
| } | |
| size_t swiotlb_max_mapping_size(struct device *dev) | |
| { | |
| return ((size_t)1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE; | |
| } | |
| bool is_swiotlb_active(void) | |
| { | |
| /* | |
| * When SWIOTLB is initialized, even if io_tlb_start points to physical | |
| * address zero, io_tlb_end surely doesn't. | |
| */ | |
| return io_tlb_end != 0; | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static int __init swiotlb_create_debugfs(void) | |
| { | |
| struct dentry *root; | |
| root = debugfs_create_dir("swiotlb", NULL); | |
| debugfs_create_ulong("io_tlb_nslabs", 0400, root, &io_tlb_nslabs); | |
| debugfs_create_ulong("io_tlb_used", 0400, root, &io_tlb_used); | |
| return 0; | |
| } | |
| late_initcall(swiotlb_create_debugfs); | |
| #endif |