| #ifdef CONFIG_SMP | |
| #include "sched-pelt.h" | |
| int __update_load_avg_blocked_se(u64 now, struct sched_entity *se); | |
| int __update_load_avg_se(u64 now, struct cfs_rq *cfs_rq, struct sched_entity *se); | |
| int __update_load_avg_cfs_rq(u64 now, struct cfs_rq *cfs_rq); | |
| int update_rt_rq_load_avg(u64 now, struct rq *rq, int running); | |
| int update_dl_rq_load_avg(u64 now, struct rq *rq, int running); | |
| #ifdef CONFIG_HAVE_SCHED_AVG_IRQ | |
| int update_irq_load_avg(struct rq *rq, u64 running); | |
| #else | |
| static inline int | |
| update_irq_load_avg(struct rq *rq, u64 running) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * When a task is dequeued, its estimated utilization should not be update if | |
| * its util_avg has not been updated at least once. | |
| * This flag is used to synchronize util_avg updates with util_est updates. | |
| * We map this information into the LSB bit of the utilization saved at | |
| * dequeue time (i.e. util_est.dequeued). | |
| */ | |
| #define UTIL_AVG_UNCHANGED 0x1 | |
| static inline void cfs_se_util_change(struct sched_avg *avg) | |
| { | |
| unsigned int enqueued; | |
| if (!sched_feat(UTIL_EST)) | |
| return; | |
| /* Avoid store if the flag has been already set */ | |
| enqueued = avg->util_est.enqueued; | |
| if (!(enqueued & UTIL_AVG_UNCHANGED)) | |
| return; | |
| /* Reset flag to report util_avg has been updated */ | |
| enqueued &= ~UTIL_AVG_UNCHANGED; | |
| WRITE_ONCE(avg->util_est.enqueued, enqueued); | |
| } | |
| /* | |
| * The clock_pelt scales the time to reflect the effective amount of | |
| * computation done during the running delta time but then sync back to | |
| * clock_task when rq is idle. | |
| * | |
| * | |
| * absolute time | 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|16 | |
| * @ max capacity ------******---------------******--------------- | |
| * @ half capacity ------************---------************--------- | |
| * clock pelt | 1| 2| 3| 4| 7| 8| 9| 10| 11|14|15|16 | |
| * | |
| */ | |
| static inline void update_rq_clock_pelt(struct rq *rq, s64 delta) | |
| { | |
| if (unlikely(is_idle_task(rq->curr))) { | |
| /* The rq is idle, we can sync to clock_task */ | |
| rq->clock_pelt = rq_clock_task(rq); | |
| return; | |
| } | |
| /* | |
| * When a rq runs at a lower compute capacity, it will need | |
| * more time to do the same amount of work than at max | |
| * capacity. In order to be invariant, we scale the delta to | |
| * reflect how much work has been really done. | |
| * Running longer results in stealing idle time that will | |
| * disturb the load signal compared to max capacity. This | |
| * stolen idle time will be automatically reflected when the | |
| * rq will be idle and the clock will be synced with | |
| * rq_clock_task. | |
| */ | |
| /* | |
| * Scale the elapsed time to reflect the real amount of | |
| * computation | |
| */ | |
| delta = cap_scale(delta, arch_scale_cpu_capacity(cpu_of(rq))); | |
| delta = cap_scale(delta, arch_scale_freq_capacity(cpu_of(rq))); | |
| rq->clock_pelt += delta; | |
| } | |
| /* | |
| * When rq becomes idle, we have to check if it has lost idle time | |
| * because it was fully busy. A rq is fully used when the /Sum util_sum | |
| * is greater or equal to: | |
| * (LOAD_AVG_MAX - 1024 + rq->cfs.avg.period_contrib) << SCHED_CAPACITY_SHIFT; | |
| * For optimization and computing rounding purpose, we don't take into account | |
| * the position in the current window (period_contrib) and we use the higher | |
| * bound of util_sum to decide. | |
| */ | |
| static inline void update_idle_rq_clock_pelt(struct rq *rq) | |
| { | |
| u32 divider = ((LOAD_AVG_MAX - 1024) << SCHED_CAPACITY_SHIFT) - LOAD_AVG_MAX; | |
| u32 util_sum = rq->cfs.avg.util_sum; | |
| util_sum += rq->avg_rt.util_sum; | |
| util_sum += rq->avg_dl.util_sum; | |
| /* | |
| * Reflecting stolen time makes sense only if the idle | |
| * phase would be present at max capacity. As soon as the | |
| * utilization of a rq has reached the maximum value, it is | |
| * considered as an always runnig rq without idle time to | |
| * steal. This potential idle time is considered as lost in | |
| * this case. We keep track of this lost idle time compare to | |
| * rq's clock_task. | |
| */ | |
| if (util_sum >= divider) | |
| rq->lost_idle_time += rq_clock_task(rq) - rq->clock_pelt; | |
| } | |
| static inline u64 rq_clock_pelt(struct rq *rq) | |
| { | |
| lockdep_assert_held(&rq->lock); | |
| assert_clock_updated(rq); | |
| return rq->clock_pelt - rq->lost_idle_time; | |
| } | |
| #ifdef CONFIG_CFS_BANDWIDTH | |
| /* rq->task_clock normalized against any time this cfs_rq has spent throttled */ | |
| static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq) | |
| { | |
| if (unlikely(cfs_rq->throttle_count)) | |
| return cfs_rq->throttled_clock_task - cfs_rq->throttled_clock_task_time; | |
| return rq_clock_pelt(rq_of(cfs_rq)) - cfs_rq->throttled_clock_task_time; | |
| } | |
| #else | |
| static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq) | |
| { | |
| return rq_clock_pelt(rq_of(cfs_rq)); | |
| } | |
| #endif | |
| #else | |
| static inline int | |
| update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq) | |
| { | |
| return 0; | |
| } | |
| static inline int | |
| update_rt_rq_load_avg(u64 now, struct rq *rq, int running) | |
| { | |
| return 0; | |
| } | |
| static inline int | |
| update_dl_rq_load_avg(u64 now, struct rq *rq, int running) | |
| { | |
| return 0; | |
| } | |
| static inline int | |
| update_irq_load_avg(struct rq *rq, u64 running) | |
| { | |
| return 0; | |
| } | |
| static inline u64 rq_clock_pelt(struct rq *rq) | |
| { | |
| return rq_clock_task(rq); | |
| } | |
| static inline void | |
| update_rq_clock_pelt(struct rq *rq, s64 delta) { } | |
| static inline void | |
| update_idle_rq_clock_pelt(struct rq *rq) { } | |
| #endif | |