| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Hisilicon Ltd. HiP04 SoC |
| * |
| * Copyright (C) 2013-2014 Hisilicon Ltd. |
| * Copyright (C) 2013-2014 Linaro Ltd. |
| * |
| * Author: Haojian Zhuang <haojian.zhuang@linaro.org> |
| */ |
| |
| / { |
| /* memory bus is 64-bit */ |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| bootwrapper { |
| compatible = "hisilicon,hip04-bootwrapper"; |
| boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| cluster1 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| cluster2 { |
| core0 { |
| cpu = <&CPU8>; |
| }; |
| core1 { |
| cpu = <&CPU9>; |
| }; |
| core2 { |
| cpu = <&CPU10>; |
| }; |
| core3 { |
| cpu = <&CPU11>; |
| }; |
| }; |
| cluster3 { |
| core0 { |
| cpu = <&CPU12>; |
| }; |
| core1 { |
| cpu = <&CPU13>; |
| }; |
| core2 { |
| cpu = <&CPU14>; |
| }; |
| core3 { |
| cpu = <&CPU15>; |
| }; |
| }; |
| }; |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0>; |
| }; |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <1>; |
| }; |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <2>; |
| }; |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <3>; |
| }; |
| CPU4: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x100>; |
| }; |
| CPU5: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x101>; |
| }; |
| CPU6: cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x102>; |
| }; |
| CPU7: cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x103>; |
| }; |
| CPU8: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x200>; |
| }; |
| CPU9: cpu@201 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x201>; |
| }; |
| CPU10: cpu@202 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x202>; |
| }; |
| CPU11: cpu@203 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x203>; |
| }; |
| CPU12: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x300>; |
| }; |
| CPU13: cpu@301 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x301>; |
| }; |
| CPU14: cpu@302 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x302>; |
| }; |
| CPU15: cpu@303 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x303>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <1 13 0xf08>, |
| <1 14 0xf08>, |
| <1 11 0xf08>, |
| <1 10 0xf08>; |
| }; |
| |
| clk_50m: clk_50m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <50000000>; |
| }; |
| |
| clk_168m: clk_168m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <168000000>; |
| }; |
| |
| clk_375m: clk_375m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <375000000>; |
| }; |
| |
| soc { |
| /* It's a 32-bit SoC. */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges = <0 0 0xe0000000 0x10000000>; |
| |
| gic: interrupt-controller@c01000 { |
| compatible = "hisilicon,hip04-intc"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| interrupts = <1 9 0xf04>; |
| |
| reg = <0xc01000 0x1000>, <0xc02000 0x1000>, |
| <0xc04000 0x2000>, <0xc06000 0x2000>; |
| }; |
| |
| sysctrl: sysctrl { |
| compatible = "hisilicon,sysctrl", "syscon"; |
| reg = <0x3e00000 0x00100000>; |
| }; |
| |
| fabric: fabric { |
| compatible = "hisilicon,hip04-fabric"; |
| reg = <0x302a000 0x1000>; |
| }; |
| |
| dual_timer0: dual_timer@3000000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x3000000 0x1000>; |
| interrupts = <0 224 4>; |
| clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a15-pmu"; |
| interrupts = <0 64 4>, |
| <0 65 4>, |
| <0 66 4>, |
| <0 67 4>, |
| <0 68 4>, |
| <0 69 4>, |
| <0 70 4>, |
| <0 71 4>, |
| <0 72 4>, |
| <0 73 4>, |
| <0 74 4>, |
| <0 75 4>, |
| <0 76 4>, |
| <0 77 4>, |
| <0 78 4>, |
| <0 79 4>; |
| }; |
| |
| uart0: uart@4007000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x4007000 0x1000>; |
| interrupts = <0 381 4>; |
| clocks = <&clk_168m>; |
| clock-names = "uartclk"; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| sata0: sata@a000000 { |
| compatible = "hisilicon,hisi-ahci"; |
| reg = <0xa000000 0x1000000>; |
| interrupts = <0 372 4>; |
| }; |
| |
| }; |
| |
| etb@0,e3c42000 { |
| compatible = "arm,coresight-etb10", "arm,primecell"; |
| reg = <0 0xe3c42000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| in-ports { |
| port { |
| etb0_in_port: endpoint@0 { |
| remote-endpoint = <&replicator0_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etb@0,e3c82000 { |
| compatible = "arm,coresight-etb10", "arm,primecell"; |
| reg = <0 0xe3c82000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| in-ports { |
| port { |
| etb1_in_port: endpoint@0 { |
| remote-endpoint = <&replicator1_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etb@0,e3cc2000 { |
| compatible = "arm,coresight-etb10", "arm,primecell"; |
| reg = <0 0xe3cc2000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| in-ports { |
| port { |
| etb2_in_port: endpoint@0 { |
| remote-endpoint = <&replicator2_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etb@0,e3d02000 { |
| compatible = "arm,coresight-etb10", "arm,primecell"; |
| reg = <0 0xe3d02000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| in-ports { |
| port { |
| etb3_in_port: endpoint@0 { |
| remote-endpoint = <&replicator3_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpiu@0,e3c05000 { |
| compatible = "arm,coresight-tpiu", "arm,primecell"; |
| reg = <0 0xe3c05000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| in-ports { |
| port { |
| tpiu_in_port: endpoint@0 { |
| remote-endpoint = <&funnel4_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator0 { |
| /* non-configurable replicators don't show up on the |
| * AMBA bus. As such no need to add "arm,primecell". |
| */ |
| compatible = "arm,coresight-static-replicator"; |
| |
| out-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* replicator output ports */ |
| port@0 { |
| reg = <0>; |
| replicator0_out_port0: endpoint { |
| remote-endpoint = <&etb0_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator0_out_port1: endpoint { |
| remote-endpoint = <&funnel4_in_port0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| replicator0_in_port0: endpoint { |
| remote-endpoint = <&funnel0_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator1 { |
| /* non-configurable replicators don't show up on the |
| * AMBA bus. As such no need to add "arm,primecell". |
| */ |
| compatible = "arm,coresight-static-replicator"; |
| |
| out-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* replicator output ports */ |
| port@0 { |
| reg = <0>; |
| replicator1_out_port0: endpoint { |
| remote-endpoint = <&etb1_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator1_out_port1: endpoint { |
| remote-endpoint = <&funnel4_in_port1>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| replicator1_in_port0: endpoint { |
| remote-endpoint = <&funnel1_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator2 { |
| /* non-configurable replicators don't show up on the |
| * AMBA bus. As such no need to add "arm,primecell". |
| */ |
| compatible = "arm,coresight-static-replicator"; |
| |
| out-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| replicator2_out_port0: endpoint { |
| remote-endpoint = <&etb2_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator2_out_port1: endpoint { |
| remote-endpoint = <&funnel4_in_port2>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| replicator2_in_port0: endpoint { |
| remote-endpoint = <&funnel2_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator3 { |
| /* non-configurable replicators don't show up on the |
| * AMBA bus. As such no need to add "arm,primecell". |
| */ |
| compatible = "arm,coresight-static-replicator"; |
| |
| out-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| replicator3_out_port0: endpoint { |
| remote-endpoint = <&etb3_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator3_out_port1: endpoint { |
| remote-endpoint = <&funnel4_in_port3>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| replicator3_in_port0: endpoint { |
| remote-endpoint = <&funnel3_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@0,e3c41000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0xe3c41000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| out-ports { |
| port { |
| funnel0_out_port0: endpoint { |
| remote-endpoint = |
| <&replicator0_in_port0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| funnel0_in_port0: endpoint { |
| remote-endpoint = <&ptm0_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| funnel0_in_port1: endpoint { |
| remote-endpoint = <&ptm1_out_port>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| funnel0_in_port2: endpoint { |
| remote-endpoint = <&ptm2_out_port>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| funnel0_in_port3: endpoint { |
| remote-endpoint = <&ptm3_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@0,e3c81000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0xe3c81000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| out-ports { |
| port { |
| funnel1_out_port0: endpoint { |
| remote-endpoint = |
| <&replicator1_in_port0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| funnel1_in_port0: endpoint { |
| remote-endpoint = <&ptm4_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| funnel1_in_port1: endpoint { |
| remote-endpoint = <&ptm5_out_port>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| funnel1_in_port2: endpoint { |
| remote-endpoint = <&ptm6_out_port>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| funnel1_in_port3: endpoint { |
| remote-endpoint = <&ptm7_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@0,e3cc1000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0xe3cc1000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| out-ports { |
| port { |
| funnel2_out_port0: endpoint { |
| remote-endpoint = |
| <&replicator2_in_port0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| funnel2_in_port0: endpoint { |
| remote-endpoint = <&ptm8_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| funnel2_in_port1: endpoint { |
| remote-endpoint = <&ptm9_out_port>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| funnel2_in_port2: endpoint { |
| remote-endpoint = <&ptm10_out_port>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| funnel2_in_port3: endpoint { |
| remote-endpoint = <&ptm11_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@0,e3d01000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0xe3d01000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| out-ports { |
| port { |
| funnel3_out_port0: endpoint { |
| remote-endpoint = |
| <&replicator3_in_port0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| funnel3_in_port0: endpoint { |
| remote-endpoint = <&ptm12_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| funnel3_in_port1: endpoint { |
| remote-endpoint = <&ptm13_out_port>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| funnel3_in_port2: endpoint { |
| remote-endpoint = <&ptm14_out_port>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| funnel3_in_port3: endpoint { |
| remote-endpoint = <&ptm15_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@0,e3c04000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0xe3c04000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| out-ports { |
| port { |
| funnel4_out_port0: endpoint { |
| remote-endpoint = <&tpiu_in_port>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| funnel4_in_port0: endpoint { |
| remote-endpoint = |
| <&replicator0_out_port1>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| funnel4_in_port1: endpoint { |
| remote-endpoint = |
| <&replicator1_out_port1>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| funnel4_in_port2: endpoint { |
| remote-endpoint = |
| <&replicator2_out_port1>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| funnel4_in_port3: endpoint { |
| remote-endpoint = |
| <&replicator3_out_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3c7c000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3c7c000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU0>; |
| out-ports { |
| port { |
| ptm0_out_port: endpoint { |
| remote-endpoint = <&funnel0_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3c7d000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3c7d000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU1>; |
| out-ports { |
| port { |
| ptm1_out_port: endpoint { |
| remote-endpoint = <&funnel0_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3c7e000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3c7e000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU2>; |
| out-ports { |
| port { |
| ptm2_out_port: endpoint { |
| remote-endpoint = <&funnel0_in_port2>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3c7f000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3c7f000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU3>; |
| out-ports { |
| port { |
| ptm3_out_port: endpoint { |
| remote-endpoint = <&funnel0_in_port3>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cbc000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cbc000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU4>; |
| out-ports { |
| port { |
| ptm4_out_port: endpoint { |
| remote-endpoint = <&funnel1_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cbd000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cbd000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU5>; |
| out-ports { |
| port { |
| ptm5_out_port: endpoint { |
| remote-endpoint = <&funnel1_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cbe000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cbe000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU6>; |
| out-ports { |
| port { |
| ptm6_out_port: endpoint { |
| remote-endpoint = <&funnel1_in_port2>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cbf000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cbf000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU7>; |
| out-ports { |
| port { |
| ptm7_out_port: endpoint { |
| remote-endpoint = <&funnel1_in_port3>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cfc000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cfc000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU8>; |
| out-ports { |
| port { |
| ptm8_out_port: endpoint { |
| remote-endpoint = <&funnel2_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cfd000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cfd000 0 0x1000>; |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU9>; |
| out-ports { |
| port { |
| ptm9_out_port: endpoint { |
| remote-endpoint = <&funnel2_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cfe000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cfe000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU10>; |
| out-ports { |
| port { |
| ptm10_out_port: endpoint { |
| remote-endpoint = <&funnel2_in_port2>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3cff000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3cff000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU11>; |
| out-ports { |
| port { |
| ptm11_out_port: endpoint { |
| remote-endpoint = <&funnel2_in_port3>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3d3c000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3d3c000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU12>; |
| out-ports { |
| port { |
| ptm12_out_port: endpoint { |
| remote-endpoint = <&funnel3_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3d3d000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3d3d000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU13>; |
| out-ports { |
| port { |
| ptm13_out_port: endpoint { |
| remote-endpoint = <&funnel3_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3d3e000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3d3e000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU14>; |
| out-ports { |
| port { |
| ptm14_out_port: endpoint { |
| remote-endpoint = <&funnel3_in_port2>; |
| }; |
| }; |
| }; |
| }; |
| |
| ptm@0,e3d3f000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0 0xe3d3f000 0 0x1000>; |
| |
| clocks = <&clk_375m>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU15>; |
| out-ports { |
| port { |
| ptm15_out_port: endpoint { |
| remote-endpoint = <&funnel3_in_port3>; |
| }; |
| }; |
| }; |
| }; |
| }; |
