| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| |
| #include "tegra20-tamonten.dtsi" |
| |
| / { |
| model = "Avionic Design Tamonten Evaluation Carrier"; |
| compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; |
| |
| host1x@50000000 { |
| hdmi@54280000 { |
| status = "okay"; |
| }; |
| }; |
| |
| i2c@7000c000 { |
| wm8903: wm8903@1a { |
| compatible = "wlf,wm8903"; |
| reg = <0x1a>; |
| interrupt-parent = <&gpio>; |
| interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| micdet-cfg = <0>; |
| micdet-delay = <100>; |
| gpio-cfg = <0xffffffff |
| 0xffffffff |
| 0 |
| 0xffffffff |
| 0xffffffff>; |
| }; |
| }; |
| |
| pcie@80003000 { |
| status = "okay"; |
| |
| pci@1,0 { |
| status = "okay"; |
| }; |
| }; |
| |
| sound { |
| compatible = "ad,tegra-audio-wm8903-tec", |
| "nvidia,tegra-audio-wm8903"; |
| nvidia,model = "Avionic Design TEC"; |
| |
| nvidia,audio-routing = |
| "Headphone Jack", "HPOUTR", |
| "Headphone Jack", "HPOUTL", |
| "Int Spk", "ROP", |
| "Int Spk", "RON", |
| "Int Spk", "LOP", |
| "Int Spk", "LON", |
| "Mic Jack", "MICBIAS", |
| "IN1L", "Mic Jack"; |
| |
| nvidia,i2s-controller = <&tegra_i2s1>; |
| nvidia,audio-codec = <&wm8903>; |
| |
| nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; |
| nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) |
| GPIO_ACTIVE_HIGH>; |
| |
| clocks = <&tegra_car TEGRA20_CLK_PLL_A>, |
| <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, |
| <&tegra_car TEGRA20_CLK_CDEV1>; |
| clock-names = "pll_a", "pll_a_out0", "mclk"; |
| }; |
| |
| vcc_24v_reg: regulator@100 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_24v"; |
| regulator-min-microvolt = <24000000>; |
| regulator-max-microvolt = <24000000>; |
| regulator-always-on; |
| }; |
| |
| vdd_5v0_reg: regulator@101 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_5v0"; |
| vin-supply = <&vcc_24v_reg>; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| vdd_3v3_reg: regulator@102 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_3v3"; |
| vin-supply = <&vcc_24v_reg>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vdd_1v8_reg: regulator@103 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_1v8"; |
| vin-supply = <&vdd_3v3_reg>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| }; |