blob: d67dbfff76ccf40dd22846a2a5850c9b0cdfee5d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* JZ4780 BCH controller driver
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include "ingenic_ecc.h"
#define BCH_BHCR 0x0
#define BCH_BHCCR 0x8
#define BCH_BHCNT 0xc
#define BCH_BHDR 0x10
#define BCH_BHPAR0 0x14
#define BCH_BHERR0 0x84
#define BCH_BHINT 0x184
#define BCH_BHINTES 0x188
#define BCH_BHINTEC 0x18c
#define BCH_BHINTE 0x190
#define BCH_BHCR_BSEL_SHIFT 4
#define BCH_BHCR_BSEL_MASK (0x7f << BCH_BHCR_BSEL_SHIFT)
#define BCH_BHCR_ENCE BIT(2)
#define BCH_BHCR_INIT BIT(1)
#define BCH_BHCR_BCHE BIT(0)
#define BCH_BHCNT_PARITYSIZE_SHIFT 16
#define BCH_BHCNT_PARITYSIZE_MASK (0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
#define BCH_BHCNT_BLOCKSIZE_SHIFT 0
#define BCH_BHCNT_BLOCKSIZE_MASK (0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
#define BCH_BHERR_MASK_SHIFT 16
#define BCH_BHERR_MASK_MASK (0xffff << BCH_BHERR_MASK_SHIFT)
#define BCH_BHERR_INDEX_SHIFT 0
#define BCH_BHERR_INDEX_MASK (0x7ff << BCH_BHERR_INDEX_SHIFT)
#define BCH_BHINT_ERRC_SHIFT 24
#define BCH_BHINT_ERRC_MASK (0x7f << BCH_BHINT_ERRC_SHIFT)
#define BCH_BHINT_TERRC_SHIFT 16
#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
#define BCH_BHINT_DECF BIT(3)
#define BCH_BHINT_ENCF BIT(2)
#define BCH_BHINT_UNCOR BIT(1)
#define BCH_BHINT_ERR BIT(0)
#define BCH_CLK_RATE (200 * 1000 * 1000)
/* Timeout for BCH calculation/correction. */
#define BCH_TIMEOUT_US 100000
static void jz4780_bch_reset(struct ingenic_ecc *bch,
struct ingenic_ecc_params *params, bool encode)
{
u32 reg;
/* Clear interrupt status. */
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
/* Set up BCH count register. */
reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
writel(reg, bch->base + BCH_BHCNT);
/* Initialise and enable BCH. */
reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
if (encode)
reg |= BCH_BHCR_ENCE;
writel(reg, bch->base + BCH_BHCR);
}
static void jz4780_bch_disable(struct ingenic_ecc *bch)
{
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
}
static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
size_t size8 = size % sizeof(u32);
const u32 *src32;
const u8 *src8;
src32 = (const u32 *)buf;
while (size32--)
writel(*src32++, bch->base + BCH_BHDR);
src8 = (const u8 *)src32;
while (size8--)
writeb(*src8++, bch->base + BCH_BHDR);
}
static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
size_t size8 = size % sizeof(u32);
u32 *dest32;
u8 *dest8;
u32 val, offset = 0;
dest32 = (u32 *)buf;
while (size32--) {
*dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
offset += sizeof(u32);
}
dest8 = (u8 *)dest32;
val = readl(bch->base + BCH_BHPAR0 + offset);
switch (size8) {
case 3:
dest8[2] = (val >> 16) & 0xff;
fallthrough;
case 2:
dest8[1] = (val >> 8) & 0xff;
fallthrough;
case 1:
dest8[0] = val & 0xff;
break;
}
}
static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
u32 *status)
{
u32 reg;
int ret;
/*
* While we could use interrupts here and sleep until the operation
* completes, the controller works fairly quickly (usually a few
* microseconds) and so the overhead of sleeping until we get an
* interrupt quite noticeably decreases performance.
*/
ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
(reg & irq) == irq, 0, BCH_TIMEOUT_US);
if (ret)
return false;
if (status)
*status = reg;
writel(reg, bch->base + BCH_BHINT);
return true;
}
static int jz4780_calculate(struct ingenic_ecc *bch,
struct ingenic_ecc_params *params,
const u8 *buf, u8 *ecc_code)
{
int ret = 0;
mutex_lock(&bch->lock);
jz4780_bch_reset(bch, params, true);
jz4780_bch_write_data(bch, buf, params->size);
if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
jz4780_bch_read_parity(bch, ecc_code, params->bytes);
} else {
dev_err(bch->dev, "timed out while calculating ECC\n");
ret = -ETIMEDOUT;
}
jz4780_bch_disable(bch);
mutex_unlock(&bch->lock);
return ret;
}
static int jz4780_correct(struct ingenic_ecc *bch,
struct ingenic_ecc_params *params,
u8 *buf, u8 *ecc_code)
{
u32 reg, mask, index;
int i, ret, count;
mutex_lock(&bch->lock);
jz4780_bch_reset(bch, params, false);
jz4780_bch_write_data(bch, buf, params->size);
jz4780_bch_write_data(bch, ecc_code, params->bytes);
if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
dev_err(bch->dev, "timed out while correcting data\n");
ret = -ETIMEDOUT;
goto out;
}
if (reg & BCH_BHINT_UNCOR) {
dev_warn(bch->dev, "uncorrectable ECC error\n");
ret = -EBADMSG;
goto out;
}
/* Correct any detected errors. */
if (reg & BCH_BHINT_ERR) {
count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
for (i = 0; i < count; i++) {
reg = readl(bch->base + BCH_BHERR0 + (i * 4));
mask = (reg & BCH_BHERR_MASK_MASK) >>
BCH_BHERR_MASK_SHIFT;
index = (reg & BCH_BHERR_INDEX_MASK) >>
BCH_BHERR_INDEX_SHIFT;
buf[(index * 2) + 0] ^= mask;
buf[(index * 2) + 1] ^= mask >> 8;
}
} else {
ret = 0;
}
out:
jz4780_bch_disable(bch);
mutex_unlock(&bch->lock);
return ret;
}
static int jz4780_bch_probe(struct platform_device *pdev)
{
struct ingenic_ecc *bch;
int ret;
ret = ingenic_ecc_probe(pdev);
if (ret)
return ret;
bch = platform_get_drvdata(pdev);
clk_set_rate(bch->clk, BCH_CLK_RATE);
return 0;
}
static const struct ingenic_ecc_ops jz4780_bch_ops = {
.disable = jz4780_bch_disable,
.calculate = jz4780_calculate,
.correct = jz4780_correct,
};
static const struct of_device_id jz4780_bch_dt_match[] = {
{ .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops },
{},
};
MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
static struct platform_driver jz4780_bch_driver = {
.probe = jz4780_bch_probe,
.driver = {
.name = "jz4780-bch",
.of_match_table = of_match_ptr(jz4780_bch_dt_match),
},
};
module_platform_driver(jz4780_bch_driver);
MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
MODULE_LICENSE("GPL v2");